2.6.28-rc2-mm1 - sound semi-busted on Dell Latitude D820
Sometime between -mmotm1017 and -rc2-mm1, something odd happened to the sound subsystem. On my Dell Latitude D820, audio works OK if it's sitting there standalone, or in its docking station.
However, when I plug in headphones, it goes silent.
Sorry for not having any more detail, but I've not had a chance to bisect this down to a specific commit.
I did run alsa-info for the two kernels, here's a diff between them. I also attached a copy of the full output for working -mmotm1017.
(- lines are working -mmotm-1017, + are busted -rc2-mm1)
alsa-info-rc3-mm1 2008-11-10 14:13:17.000000000 -0500 renamed from alsa-info-mmotm1017 2008-11-10 14:17:04.000000000 -0500 +6 -6
@@ -3,7 +3,7 @@ !!ALSA Information Script v 0.4.51 !!################################ -!!Script ran on: Mon Nov 10 14:16:47 EST 2008 +!!Script ran on: Mon Nov 10 14:12:28 EST 2008 !!Linux Distribution
@@ -15,7 +15,7 @@ !!Kernel Information !!------------------ -Kernel release: 2.6.27-mmotm1017 +Kernel release: 2.6.28-rc3-mm1 Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64
@@ -25,7 +25,7 @@ !!ALSA Version !!------------ -Driver version: 1.0.18rc3 +Driver version: 1.0.18 Library version: 1.0.18rc3 Utilities version: 1.0.18rc3
@@ -39,7 +39,7 @@ !!----------------------------- 0 [Intel ]: HDA-Intel - HDA Intel - HDA Intel at 0xefffc000 irq 314 + HDA Intel at 0xefffc000 irq 41 !!PCI Soundcards installed in the system
@@ -165,8 +165,8 @@ Pin Default 0x0321121f: [Jack] HP Out at Ext Left Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0xf - Pin-ctls: 0xc0: OUT HP - Unsolicited: tag=30, enabled=1 + Pin-ctls: 0x00: + Unsolicited: tag=3d, enabled=1 Connection: 1 0x0b Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
@@ -234,12 +234,12 @@ !!ALSA Device nodes !!-----------------
Looks like it lost the bits that setup the headphone jack.
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.51
!!################################
!!Script ran on: Mon Nov 10 14:16:47 EST 2008
!!Linux Distribution
!!------------------
Fedora release 9.93 (Rawhide) Fedora release 9.93 (Rawhide) Fedora release 9.93 (Rawhide) Fedora release 9.93 (Rawhide)
!!Kernel Information
!!------------------
Kernel release: 2.6.27-mmotm1017 Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.18rc3 Library version: 1.0.18rc3 Utilities version: 1.0.18rc3
!!Loaded ALSA modules
!!-------------------
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xefffc000 irq 314
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's !!--------------------------------------------------------
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 1028:01cc
!!Modprobe options (Sound related)
!!--------------------------------
snd-card-0: index=0
snd-hda-intel: index=0 enable_msi=1 power_save=5
!!Loaded sound module options
!!--------------------------
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: SigmaTel STAC9200
Address: 0
Vendor Id: 0x83847690
Subsystem Id: 0x102801cc
Revision Id: 0x102201
No Modem Function Group found
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
GPIO: io=4, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x0a
Processing caps: benign=0, ncoeff=0
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Connection: 1
0x08Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x1e0]: 44100 48000 88200 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Delay: 4 samples
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Delay: 3 samples
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo R/L
Connection: 3
0x02* 0x08 0x0a
Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x00010024: IN EAPD Detect
EAPD 0x0:
Pin Default 0x40c003fa: [N/A] SPDIF In at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0xa
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Delay: 3 samples
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x0144131f: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 2
0x05* 0x0a
Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x0d 0x0d]
Connection: 1
0x0c
Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x80 0x80]
Connection: 1
0x07
Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Connection: 5
0x10 0x0f* 0x0e 0x0d 0x12
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense Pin Default 0x0321121f: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=30, enabled=1
Connection: 1
0x0b
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense Pin Default 0x90170310: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0b
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00000037: IN OUT Detect Trigger ImpSense Pin Default 0x90a70321: [Fixed] Mic at Int N/A
Conn = Analog, Color = Unknown DefAssociation = 0x2, Sequence = 0x1 Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 1
0x0b
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x03a11020: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x0b
Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00]
Pincap 0x00000010: OUT
Pin Default 0x401003fb: [N/A] Speaker at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0xb Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x13
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x40f000fc: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0xc
Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x07
Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1 Amp-Out vals: [0x00]
Codec: Conexant ID 2bfa
Address: 1
Vendor Id: 0x14f12bfa
Subsystem Id: 0x14f100c3
Revision Id: 0x90000
Modem Function Group: 0x2
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 valdis root 116, 7 2008-11-10 14:14 /dev/snd/controlC0 crw-rw----+ 1 valdis root 116, 6 2008-11-10 14:16 /dev/snd/pcmC0D0c crw-rw----+ 1 valdis root 116, 5 2008-11-10 14:16 /dev/snd/pcmC0D0p crw-rw----+ 1 valdis root 116, 4 2008-11-10 14:14 /dev/snd/pcmC0D1p crw-rw----+ 1 valdis root 116, 3 2008-11-10 14:14 /dev/snd/seq crw-rw----+ 1 valdis root 116, 2 2008-11-10 14:14 /dev/snd/timer
!!ALSA configuration files
!!------------------------
!!User specific config file (~/.asoundrc)
pcm.!default {
type pulse
}
ctl.!default {
type pulse
}
!!System wide config file (/etc/asound.conf)
#
# Place your global alsa-lib configuration here... #
@hooks [
{
func load
files [
"/etc/alsa/pulse-default.conf"
]
errors false
}]
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xefffc000 irq 314'
Mixer name : 'SigmaTel STAC9200'
Components : 'HDA:83847690,102801cc,00102201 HDA:14f12bfa,14f100c3,00090000'
Controls : 10
Simple ctrls : 5
Simple mixer control 'Master',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-46.50dB] [off] Front Right: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 13 [87%] [19.50dB] [on] Front Right: Capture 13 [87%] [19.50dB] [on]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic'
Item0: 'Mic'
!!Alsactl output
!!-------------
--startcollapse--
state.Intel {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -4650
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value.0 0
value.1 0
}
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Master Playback Switch'
value.0 false
value.1 false
}
control.3 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
iface MIXER
name 'Input Source'
value Mic
}
control.4 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 15'
comment.dbmin 0
comment.dbmax 2250
iface MIXER
name 'Capture Volume'
value.0 13
value.1 13
}
control.5 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
}
control.6 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.7 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.8 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
}
control.10 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Module
irnetppp_generic
slhcirtty_sirsir_devircomm_tty
ircomm
irdacrc_ccitt
coretempnf_conntrack_ftpxt_pkttypeipt_REJECTnf_conntrack_ipv4nf_defrag_ipv4xt_ipisforifxt_recentipt_LOGxt_u32iptable_filterip_tablesxt_tcpudpnf_conntrack_ipv6xt_statenf_conntrackip6t_LOGxt_limitip6table_filterip6_tablesx_tablessha256_genericaes_x86_64aes_generic
rtcacpi_cpufreqtpm_tis
tpmtpm_biosgspca_spca561gspca_maincompat_ioctl32
videodev
arc4
ecbv4l1_compat
nvidia
pcmcia
iwl3945
rfkill
mac80211
ohci1394snd_hda_intel
ieee1394yenta_socketrsrc_nonstaticpcmcia_core
videoled_classuhci_hcd
outputiTCO_wdt
cfg80211iTCO_vendor_support
thermalintel_agp
processor
battery
button
dcdbas
ac
At Mon, 10 Nov 2008 14:35:58 -0500,
Quoted 6 lines · [email protected] wrote:
Sometime between -mmotm1017 and -rc2-mm1, something odd happened to the sound subsystem. On my Dell Latitude D820, audio works OK if it's sitting there standalone, or in its docking station.
However, when I plug in headphones, it goes silent.
To confirm a regression, could you copy sound/pci/hda/patch_sigmatel.c from 2.6.27 kernel and check the driver works? Does the same problem exist in 2.6.28-rc kernel?
Also, just to make sure, try sound-2.6.git tree, too:
git://git.kernel.org/pub/scm/linux/kenrel/git/tiwai/sound-2.6.git
thanks,
Takashi
Quoted 576 lines
Sorry for not having any more detail, but I've not had a chance to bisect this down to a specific commit.
I did run alsa-info for the two kernels, here's a diff between them. I also attached a copy of the full output for working -mmotm1017.
(- lines are working -mmotm-1017, + are busted -rc2-mm1)
alsa-info-rc3-mm1 2008-11-10 14:13:17.000000000 -0500 renamed from alsa-info-mmotm1017 2008-11-10 14:17:04.000000000 -0500 +6
-6@@ -3,7 +3,7 @@ !!ALSA Information Script v 0.4.51 !!################################ -!!Script ran on: Mon Nov 10 14:16:47 EST 2008 +!!Script ran on: Mon Nov 10 14:12:28 EST 2008 !!Linux Distribution@@ -15,7 +15,7 @@ !!Kernel Information !!------------------ -Kernel release: 2.6.27-mmotm1017 +Kernel release: 2.6.28-rc3-mm1 Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64@@ -25,7 +25,7 @@ !!ALSA Version !!------------ -Driver version: 1.0.18rc3 +Driver version: 1.0.18 Library version: 1.0.18rc3 Utilities version: 1.0.18rc3@@ -39,7 +39,7 @@ !!----------------------------- 0 [Intel ]: HDA-Intel - HDA Intel - HDA Intel at 0xefffc000 irq 314 + HDA Intel at 0xefffc000 irq 41 !!PCI Soundcards installed in the system@@ -165,8 +165,8 @@ Pin Default 0x0321121f: [Jack] HP Out at Ext Left Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0xf - Pin-ctls: 0xc0: OUT HP - Unsolicited: tag=30, enabled=1 + Pin-ctls: 0x00: + Unsolicited: tag=3d, enabled=1 Connection: 1 0x0b Node 0x0e [Pin Complex] wcaps 0x400181: Stereo@@ -234,12 +234,12 @@ !!ALSA Device nodes !!-----------------Looks like it lost the bits that setup the headphone jack.
[1.2 alsa-info-mmotm1017 <text/plain; us-ascii (7bit)>] upload=true&script=true&cardinfo= !!################################
!!ALSA Information Script v 0.4.51 !!################################!!Script ran on: Mon Nov 10 14:16:47 EST 2008
!!Linux Distribution
!!------------------Fedora release 9.93 (Rawhide) Fedora release 9.93 (Rawhide) Fedora release 9.93 (Rawhide) Fedora release 9.93 (Rawhide)
!!Kernel Information
!!------------------Kernel release: 2.6.27-mmotm1017 Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes!!ALSA Version
!!------------Driver version: 1.0.18rc3 Library version: 1.0.18rc3 Utilities version: 1.0.18rc3!!Loaded ALSA modules
!!-------------------!!Soundcards recognised by ALSA
!!-----------------------------0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xefffc000 irq 314!!PCI Soundcards installed in the system
!!--------------------------------------00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's !!--------------------------------------------------------
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 1028:01cc!!Modprobe options (Sound related)
!!--------------------------------snd-card-0: index=0
snd-hda-intel: index=0 enable_msi=1 power_save=5!!Loaded sound module options
!!--------------------------!!HDA-Intel Codec information
!!---------------------------
--startcollapse--Codec: SigmaTel STAC9200
Address: 0
Vendor Id:0x83847690
Subsystem Id:0x102801cc
Revision Id:0x102201
No Modem Function Group found
Default PCM:rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
GPIO: io=4, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0
Node0x02[Audio Output] wcaps0xd0401: Stereo
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node0x03[Audio Input] wcaps0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 10x0aProcessing caps: benign=0, ncoeff=0
Node0x04[Audio Input] wcaps0x140311: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category:0x0
PCM:rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 4 samples Connection: 1 0x08Node
0x05[Audio Output] wcaps0x40211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category:0x0
PCM:rates [0x1e0]: 44100 48000 88200 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3Delay: 4 samples
Node0x06[Vendor Defined Widget] wcaps0xf30201: Stereo Digital
Delay: 3 samples
Node0x07[Audio Selector] wcaps0x300901: Stereo R/L
Connection: 30x02* 0x08 0x0aNode
0x08[Pin Complex] wcaps0x430681: Stereo Digital
Pincap0x00010024: IN EAPD Detect
EAPD0x0:
Pin Default0x40c003fa: [N/A] SPDIF In at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation =0xf, Sequence =0xa
Misc =NO_PRESENCE
Pin-ctls:0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Delay: 3 samples
Node0x09[Pin Complex] wcaps0x400301: Stereo Digital
Pincap0x00000010: OUT
Pin Default0x0144131f: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
DefAssociation =0x1, Sequence =0xf
Misc =NO_PRESENCE
Pin-ctls:0x40: OUT
Connection: 20x05* 0x0aNode
0x0a[Audio Selector] wcaps0x30090d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x0d0x0d]
Connection: 10x0cNode
0x0b[Audio Selector] wcaps0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x800x80]
Connection: 10x07Node
0x0c[Audio Selector] wcaps0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x000x00]
Connection: 50x10 0x0f* 0x0e 0x0d 0x12Node
0x0d[Pin Complex] wcaps0x400181: Stereo
Pincap0x0000003f: IN OUT HP Detect Trigger ImpSense Pin Default0x0321121f: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black
DefAssociation =0x1, Sequence =0xf
Pin-ctls:0xc0: OUT HP
Unsolicited: tag=30, enabled=1
Connection: 10x0bNode
0x0e[Pin Complex] wcaps0x400181: Stereo
Pincap0x0000003f: IN OUT HP Detect Trigger ImpSense Pin Default0x90170310: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown DefAssociation =0x1, Sequence =0x0
Misc =NO_PRESENCE
Pin-ctls:0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 10x0bNode
0x0f[Pin Complex] wcaps0x400181: Stereo
Pincap0x00000037: IN OUT Detect Trigger ImpSense Pin Default0x90a70321: [Fixed] Mic at Int N/A
Conn = Analog, Color = Unknown DefAssociation =0x2, Sequence =0x1Misc =NO_PRESENCE
Pin-ctls:0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 10x0bNode
0x10[Pin Complex] wcaps0x400181: Stereo
Pincap0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default0x03a11020: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black DefAssociation =0x2, Sequence =0x0
Pin-ctls:0x20: INVREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 10x0bNode
0x11[Pin Complex] wcaps0x400104: Mono Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00]
Pincap0x00000010: OUT
Pin Default0x401003fb: [N/A] Speaker at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation =0xf, Sequence =0xbMisc =NO_PRESENCE
Pin-ctls:0x00:
Connection: 10x13Node
0x12[Pin Complex] wcaps0x400001: Stereo
Pincap0x00000020: IN
Pin Default0x40f000fc: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation =0xf, Sequence =0xc
Pin-ctls:0x20: IN
Node0x13[Audio Mixer] wcaps0x200100: Mono
Connection: 10x07Node
0x14[Beep Generator Widget] wcaps0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1 Amp-Out vals: [0x00]
Codec: Conexant ID 2bfa
Address: 1
Vendor Id:0x14f12bfa
Subsystem Id:0x14f100c3
Revision Id:0x90000
Modem Function Group:0x2
--endcollapse--!!ALSA Device nodes
!!-----------------crw-rw----+ 1 valdis root 116, 7 2008-11-10 14:14
/dev/snd/controlC0crw-rw----+ 1 valdis root 116, 6 2008-11-10 14:16/dev/snd/pcmC0D0ccrw-rw----+ 1 valdis root 116, 5 2008-11-10 14:16/dev/snd/pcmC0D0pcrw-rw----+ 1 valdis root 116, 4 2008-11-10 14:14/dev/snd/pcmC0D1pcrw-rw----+ 1 valdis root 116, 3 2008-11-10 14:14/dev/snd/seqcrw-rw----+ 1 valdis root 116, 2 2008-11-10 14:14/dev/snd/timer!!ALSA configuration files
!!------------------------!!User specific config file (~/.asoundrc)
pcm.!default {
type pulse
}ctl.!default {
type pulse
}!!System wide config file (
/etc/asound.conf)#
# Place your global alsa-lib configuration here... #@hooks [
{ func load files [ "/etc/alsa/pulse-default.conf" ] errors false }]
!!Aplay/Arecord output
!!------------APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0!!Amixer output
!!-------------!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at
0xefffc000irq 314'
Mixer name : 'SigmaTel STAC9200'
Components : 'HDA:83847690,102801cc,00102201 HDA:14f12bfa,14f100c3,00090000'
Controls : 10
Simple ctrls : 5
Simple mixer control 'Master',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-46.50dB] [off] Front Right: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 13 [87%] [19.50dB] [on] Front Right: Capture 13 [87%] [19.50dB] [on]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic'
Item0: 'Mic'!!Alsactl output
!!---------------startcollapse--
state.Intel { control.1 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'Master Playback Volume' value.0 0 value.1 0 } control.2 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Master Playback Switch' value.0 false value.1 false } control.3 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 Mic comment.item.1 'Front Mic' iface MIXER name 'Input Source' value Mic } control.4 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 15' comment.dbmin 0 comment.dbmax 2250 iface MIXER name 'Capture Volume' value.0 13 value.1 13 } control.5 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Capture Switch' value.0 true value.1 true } control.6 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.7 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.8 { comment.access 'read write' comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Default' value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.9 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'IEC958 Playback Switch' value false } control.10 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'IEC958 Default PCM Playback Switch' value true } }--endcollapse--
!!All Loaded Modules
!!------------------Module
irnetppp_generic
slhcirtty_sirsir_devircomm_tty
ircomm
irdacrc_ccitt
coretempnf_conntrack_ftpxt_pkttypeipt_REJECTnf_conntrack_ipv4nf_defrag_ipv4xt_ipisforifxt_recentipt_LOGxt_u32iptable_filterip_tablesxt_tcpudpnf_conntrack_ipv6xt_statenf_conntrackip6t_LOGxt_limitip6table_filterip6_tablesx_tablessha256_genericaes_x86_64aes_generic
rtcacpi_cpufreqtpm_tis
tpmtpm_biosgspca_spca561gspca_maincompat_ioctl32
videodev
arc4
ecbv4l1_compat
nvidia
pcmcia
iwl3945
rfkill
mac80211
ohci1394snd_hda_intel
ieee1394yenta_socketrsrc_nonstaticpcmcia_core
videoled_classuhci_hcd
outputiTCO_wdt
cfg80211iTCO_vendor_support
thermalintel_agp
processor
battery
button
dcdbas
ac[2 <application/pgp-signature (7bit)>]
At Tue, 11 Nov 2008 08:47:54 +0100,
Quoted 8 lines · I wrote:
At Mon, 10 Nov 2008 14:35:58 -0500,
Quoted 5 lines · [email protected] wrote:
Sometime between -mmotm1017 and -rc2-mm1, something odd happened to the sound subsystem. On my Dell Latitude D820, audio works OK if it's sitting there standalone, or in its docking station.
Quoted 5 lines
Quoted 1 line
However, when I plug in headphones, it goes silent.
To confirm a regression, could you copy
sound/pci/hda/patch_sigmatel.cfrom 2.6.27 kernel and check the driver works? Does the same problem exist in 2.6.28-rc kernel?
Could you try the patch below?
There is another patch for a missing capture mux control, but in your case, it doesn't matter because you didn't change the value. I'll post that patch later, too.
thanks,
Takashi
===
Quoted 1 line
From
4f1e6bc3646ab50b8181555ab7e6eeab68b8632aMon Sep 17 00:00:00 2001
From: Takashi Iwai <[email protected]>
Date: Tue, 11 Nov 2008 16:47:24 +0100
Subject: [PATCH] ALSA: hda - Fix input pin initialization for STAC/IDT codecs
The input pins are sometimes not initialized properly because of the optimization check of the current pinctl code.
Force to initialize the mic input pins so that they can be set up properly even if they were in a weird state. But keep other input pins if already set up as input, since this could be an extra mic pin.
Reference: Novell bnc#443738
https://bugzilla.novell.com/show_bug.cgi?id=443738
--- sound/pci/hda/patch_sigmatel.c | 20 ++++++++++++-------- 1 files changed, 12 insertions(+), 8 deletions(-)
sound/pci/hda/patch_sigmatel.c +12 -8
@@ -3653,14 +3653,18 @@ static int stac92xx_init(struct hda_codec *codec)for (i =0 ; i <AUTO_PIN_LAST ; i++) {hda_nid_t nid = cfg->input_pins[i];if (nid) { -unsigned int pinctl =snd_hda_codec_read (codec, nid, -0 ,AC_VERB_GET_PIN_WIDGET_CONTROL ,0 ); -/* if PINCTL already set then skip */ -if (pinctl &AC_PINCAP_IN ) -continue ; - pinctl =AC_PINCTL_IN_EN ; -if (i ==AUTO_PIN_MIC || i ==AUTO_PIN_FRONT_MIC ) - pinctl |=stac92xx_get_vref (codec, nid); +unsigned int pinctl; +if (i ==AUTO_PIN_MIC || i ==AUTO_PIN_FRONT_MIC ) { +/* for mic pins, force to initialize */ + pinctl =stac92xx_get_vref (codec, nid); + }else { + pinctl =snd_hda_codec_read (codec, nid,0 , +AC_VERB_GET_PIN_WIDGET_CONTROL ,0 ); +/* if PINCTL already set then skip */ +if (pinctl &AC_PINCTL_IN_EN ) +continue ; + } + pinctl |=AC_PINCTL_IN_EN ;stac92xx_auto_set_pinctl (codec, nid, pinctl); } }
Signature · 1 line
1.6.0.4
At Tue, 11 Nov 2008 18:03:22 +0100,
Quoted 17 lines · I wrote:
At Tue, 11 Nov 2008 08:47:54 +0100,
Quoted 8 lines · I wrote:
At Mon, 10 Nov 2008 14:35:58 -0500,
Quoted 5 lines · [email protected] wrote:
Sometime between -mmotm1017 and -rc2-mm1, something odd happened to the sound subsystem. On my Dell Latitude D820, audio works OK if it's sitting there standalone, or in its docking station.
Quoted 5 lines
Quoted 1 line
However, when I plug in headphones, it goes silent.
To confirm a regression, could you copy
sound/pci/hda/patch_sigmatel.cfrom 2.6.27 kernel and check the driver works? Does the same problem exist in 2.6.28-rc kernel?
Quoted 5 lines
Could you try the patch below?
There is another patch for a missing capture mux control, but in your case, it doesn't matter because you didn't change the value. I'll post that patch later, too.
Here is another fix.
Takashi
===
Quoted 1 line
From
355a0ec471377a8a907b79c8fba3f0f09b44656eMon Sep 17 00:00:00 2001
From: Takashi Iwai <[email protected]>
Date: Tue, 11 Nov 2008 16:46:19 +0100
Subject: [PATCH] ALSA: hda - Add missing analog-mux mixer creation for STAC9200
The creation of analog-mux mixer element is missing in patch_stac9200() due to the dynamic allocation patch.
--- sound/pci/hda/patch_sigmatel.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
sound/pci/hda/patch_sigmatel.c +6 -0
@@ -3530,6 +3530,12 @@ static int stac9200_parse_auto_config(struct hda_codec *codec)if ((err =stac9200_auto_create_lfe_ctls (codec, &spec->autocfg)) <0 )return err; +if (spec->num_muxes >0 ) { + err =stac92xx_auto_create_mux_input_ctls (codec); +if (err <0 ) +return err; + } +if (spec->autocfg.dig_out_pin) spec->multiout.dig_out_nid =0x05 ;if (spec->autocfg.dig_in_pin)
Signature · 1 line
1.6.0.4
Quoted 7 lines · Takashi Iwai
Quoted 5 lines
Could you try the patch below?
There is another patch for a missing capture mux control, but in your case, it doesn't matter because you didn't change the value. I'll post that patch later, too.
Here is another fix.
Thanks for the fast reply for admittedly not-major problem. I'll give these patches a try tonight and report back tomorrow how things went...
On Tue, 11 Nov 2008 18:04:56 +0100, Takashi Iwai said:
Following up...
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
To confirm a regression, could you copy
sound/pci/hda/patch_sigmatel.cfrom 2.6.27 kernel and check the driver works? Does the same problem exist in 2.6.28-rc kernel?
Yes, it was a regression - using the older patch_sigmatel.c in the -rc4-mm kernel worked fine.
Quoted 9 lines
Quoted 5 lines
Could you try the patch below?
There is another patch for a missing capture mux control, but in your case, it doesn't matter because you didn't change the value. I'll post that patch later, too.
Here is another fix.
Subject: [PATCH] ALSA: hda - Add missing analog-mux mixer creation for STAC9200
Running with a current patch_sigmatel.c plus the two patches also works fine, so feel free to stick a Tested-By: on it if you wish...
Thanks for the speedy patches..
At Wed, 12 Nov 2008 16:09:37 -0500,
Quoted 18 lines · [email protected] wrote:
On Tue, 11 Nov 2008 18:04:56 +0100, Takashi Iwai said:
Following up...
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
To confirm a regression, could you copy
sound/pci/hda/patch_sigmatel.cfrom 2.6.27 kernel and check the driver works? Does the same problem exist in 2.6.28-rc kernel?Yes, it was a regression - using the older
patch_sigmatel.cin the -rc4-mm kernel worked fine.Quoted 6 lines
Quoted 5 lines
Could you try the patch below?
There is another patch for a missing capture mux control, but in your case, it doesn't matter because you didn't change the value. I'll post that patch later, too.
Quoted 6 lines
Quoted 3 lines
Here is another fix.
Subject: [PATCH] ALSA: hda - Add missing analog-mux mixer creation for STAC9200
Running with a current
patch_sigmatel.cplus the two patches also works fine, so feel free to stick a Tested-By: on it if you wish...
Thanks for checking.
FYI, the patches have been already merged to Linus tree yesterday, as I could confirm with other test cases.
Takashi