Skip to contentSkip to conversation

Terratec EWS88MT

DISCUSSION User for realtime audio 2 participants 4 messages Oct 21, 2002 – Oct 22, 2002

lore
Share & tools
lore
#0 lore raw

Dear users,

I am using the ice1712-driver for my Terratec EWS88MT soundcard.

All compiles fine and the modules are loaded as well. After having compiled and installed everything
I tried to use the envy24control tool. After typing the instruction to start it nothing happens but the whole system is dead. I have to reset by pushing the button.

The same happens when simply calling 'amixer contents'.

aplay ...wav does not play any sound even though all channels have been unmuted.

I have now added a soundblaster audigy as first soundcard which works well!

Has anyone experienced similar problems with that Terratec card?

Regards,
Hauke

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#1 lore raw

At Mon, 21 Oct 2002 16:20:49 +0200,

Quoted 11 lines · User for realtime audio

Dear users,

I am using the ice1712-driver for my Terratec EWS88MT soundcard.

All compiles fine and the modules are loaded as well. After having compiled and installed everything
I tried to use the envy24control tool. After typing the instruction to start it nothing happens but the whole system is dead.
I have to reset by pushing the button.

Quoted 8 lines

The same happens when simply calling 'amixer contents'.

aplay ...wav does not play any sound even though all channels have been unmuted.

I have now added a soundblaster audigy as first soundcard which works well!

Has anyone experienced similar problems with that Terratec card?

which version are you using?
there was a dead-lock mutex bug in i2c code but should have been fixed on the latest version.

please try the cvs version.

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#2 lore raw
Quoted 20 lines · Takashi Iwai

At Mon, 21 Oct 2002 16:20:49 +0200,

Quoted 8 lines · User for realtime audio

Dear users,

I am using the ice1712-driver for my Terratec EWS88MT soundcard.

All compiles fine and the modules are loaded as well. After having compiled and installed everything
I tried to use the envy24control tool. After typing the instruction to start it nothing happens but the whole system is dead. I have to reset by pushing the button.

Quoted 8 lines

The same happens when simply calling 'amixer contents'.

aplay ...wav does not play any sound even though all channels have been unmuted.

I have now added a soundblaster audigy as first soundcard which works well!

Has anyone experienced similar problems with that Terratec card?

Quoted 11 lines

which version are you using?
there was a dead-lock mutex bug in i2c code but should have been fixed on the latest version.

please try the cvs version.

Takashi

I am running kernels 2.4.16 with low latency patches and the RTC patch from alsa-package-rc3
and 2.4.18 without any patches alternatively. The alsa-package was rc-3 and is now the current CVS-version. In all cases envy24control and amixer contents lead to the system lock (amixer without contents works fine!)

I have started "strace envy24control" which let me know that

ioctl(4, 0xc245512, 0xbfffedb0)

is the instruction that causes the system lock. Multiple ioctls with only the third argument differing returned 0 just before the system lock.

When calling amixer contents, the last message printed is:

numid=103, iface=mixer, name='Input Sensitivity Switch', index=1
; TYPE=enumerated, access=rw---, values=1, items=2 ; Item #0 ='+4dBu'
; Item #1 = '-10dBV'

In comparison to the previous outputs coming from amixer contents the following line is missing:
; values=0

Any idea?

Regards,
Hauke

#3 lore raw

Hi,

At Tue, 22 Oct 2002 09:46:00 +0200,

Quoted 16 lines · User for realtime audio

I am running kernels 2.4.16 with low latency patches and the RTC patch from alsa-package-rc3
and 2.4.18 without any patches alternatively. The alsa-package was rc-3 and is now the current
CVS-version. In all cases envy24control and amixer contents lead to the system lock (amixer without contents works fine!)

I have started "strace envy24control" which let me know that

ioctl(4, 0xc245512, 0xbfffedb0)

is the instruction that causes the system lock. Multiple ioctls with only the third argument differing
returned 0 just before the system lock.

Quoted 6 lines

When calling amixer contents, the last message printed is:

numid=103, iface=mixer, name='Input Sensitivity Switch', index=1

    ; TYPE=enumerated, access=rw---, values=1, items=2
    ; Item #0 ='+4dBu'
    ; Item #1 = '-10dBV'

thanks for spotting this!
there was actually a deadlock in this part.

fixed now on cvs. please give a try.
(please note that on the cvs snd_ prefix is removed.)

ciao,

Takashi

-------------------------------------------------------
This sf.net emial is sponsored by: Influence the future of Java(TM) technology. Join the Java Community Process(SM) (JCP(SM)) program now. http://ad.doubleclick.net/clk;4699841;7576301;v?
http://www.sun.com/javavote