No speaker output with kernel 3.15 and later
I sent Takashi an email mentioning this regression a month ago, and it's taken me this long to send this email... :-$
Since updating to kernel versions >=3.15 I've had no audio from my laptop speakers. Earlier versions worked fine.
It's a CLEVO W270EUQ laptop. The output mixer device is showing up, but no sound comes out at any volume level.
As requested I've attached compressed alsa-info.sh output for both the working and non-working cases.
I'm perfectly willing to test patches etc.
At Sun, 29 Jun 2014 15:09:56 +0100,
Quoted 7 lines · Steven Newbury
I sent Takashi an email mentioning this regression a month ago, and it's taken me this long to send this email... :-$
Since updating to kernel versions >=3.15 I've had no audio from my laptop speakers. Earlier versions worked fine.
Quoted 7 lines
It's a CLEVO W270EUQ laptop. The output mixer device is showing up, but no sound comes out at any volume level.
As requested I've attached compressed
alsa-info.shoutput for both the working and non-working cases.I'm perfectly willing to test patches etc.
Hm, I see no significant difference between 3.14 and 3.15 alsa-info.sh outputs, and there's been very little change for VIA codecs between these versions. So, in short, I have no idea what went wrong.
Could you double-check whether it's really a kernel issue? That is, switch between 3.14 and 3.15 and confirm the problem happens only with 3.15. Also, for testing the sound, try like
% aplay -Dplughw -vv foo.wav
Takashi
Quoted 24 lines · Takashi Iwai
At Sun, 29 Jun 2014 15:09:56 +0100,
Quoted 9 lines · Steven Newbury
I sent
Takashi an email mentioning this regression a month ago, and
it's
taken me this long to send this email... :-$
Since updating to
kernel versions >=3.15 I've had no audio from my
laptop speakers.
Earlier versions worked fine.
It's a CLEVO W270EUQ laptop. TheQuoted 8 lines
output mixer device is showing up,
but no sound comes out at any
volume level.
As requested I've attached compressedalsa-info.sh
output for both the
working and non-working cases.
I'm perfectly
willing to test patches etc.Hm, I see no significant difference between 3.14 and 3.15
alsa-info.shoutputs, and there's been very little change for VIA codecs between these versions. So, in short, I have no idea what went wrong.
Quoted 6 lines
Could you double-check whether it's really a kernel issue? That is, switch between 3.14 and 3.15 and confirm the problem happens only with 3.15. Also, for testing the sound, try like
% aplay -Dplughw -vv foo.wav
Checked again.
3.16-rc2: silence
3.14.3: works fine
At Tue, 01 Jul 2014 12:49:32 +0100,
Quoted 30 lines · Steven Newbury
Quoted 28 lines · Takashi Iwai
At Sun, 29 Jun 2014 15:09:56 +0100,
Quoted 9 lines · Steven Newbury
I sent
Takashi an email mentioning this regression a month ago, and
it's
taken me this long to send this email... :-$
Since updating to
kernel versions >=3.15 I've had no audio from my
laptop speakers.
Earlier versions worked fine.
It's a CLEVO W270EUQ laptop. TheQuoted 8 lines
output mixer device is showing up,
but no sound comes out at any
volume level.
As requested I've attached compressedalsa-info.sh
output for both the
working and non-working cases.
I'm perfectly
willing to test patches etc.Hm, I see no significant difference between 3.14 and 3.15
alsa-info.shoutputs, and there's been very little change for VIA codecs between these versions. So, in short, I have no idea what went wrong.Could you double-check whether it's really a kernel issue? That is, switch between 3.14 and 3.15 and confirm the problem happens only with 3.15. Also, for testing the sound, try like
Quoted 6 lines
Quoted 2 lines
% aplay -Dplughw -vv foo.wav
Checked again.
3.16-rc2: silence
3.14.3: works fine
Then I'd suggest to bisect between 3.14 and 3.15.
Takashi
Quoted 32 lines · Takashi Iwai
At Tue, 01 Jul 2014 12:49:32 +0100,
Quoted 30 lines · Steven Newbury
Quoted 28 lines · Takashi Iwai
At Sun, 29 Jun 2014 15:09:56 +0100,
Quoted 9 lines · Steven Newbury
I sent
Takashi an email mentioning this regression a month ago, and
it's
taken me this long to send this email... :-$
Since updating to
kernel versions >=3.15 I've had no audio from my
laptop speakers.
Earlier versions worked fine.
It's a CLEVO W270EUQ laptop. TheQuoted 8 lines
output mixer device is showing up,
but no sound comes out at any
volume level.
As requested I've attached compressedalsa-info.sh
output for both the
working and non-working cases.
I'm perfectly
willing to test patches etc.Hm, I see no significant difference between 3.14 and 3.15
alsa-info.shoutputs, and there's been very little change for VIA codecs between these versions. So, in short, I have no idea what went wrong.Could you double-check whether it's really a kernel issue? That is, switch between 3.14 and 3.15 and confirm the problem happens only with 3.15. Also, for testing the sound, try like
Quoted 9 lines
Quoted 6 lines
Quoted 2 lines
% aplay -Dplughw -vv foo.wav
Checked again.
3.16-rc2: silence
3.14.3: works fineThen I'd suggest to bisect between 3.14 and 3.15.
Will do.
Signature · 1 line
Sent from my Jolla
Steven Newbury
Tested-by Christian GüdelQuoted 33 lines · Takashi Iwai
At Tue, 01 Jul 2014 12:49:32 +0100,
Quoted 30 lines · Steven Newbury
Quoted 29 lines · Takashi Iwai
At Sun, 29 Jun 2014 15:09:56 +0100,
Quoted 9 lines · Steven Newbury
I sent
Takashi an email mentioning this regression a month ago, and
it's
taken me this long to send this email... :-$
Since updating to
kernel versions >=3.15 I've had no audio from my
laptop speakers.
Earlier versions worked fine.
It's a CLEVO W270EUQ laptop. TheQuoted 8 lines
output mixer device is showing up,
but no sound comes out at any
volume level.
As requested I've attached compressedalsa-info.sh
output for both the
working and non-working cases.
I'm perfectly
willing to test patches etc.Hm, I see no significant difference between 3.14 and 3.15
alsa-info.sh
outputs, and there's been very little change for VIA codecs
between
these versions. So, in short, I have no idea what went wrong. Could you double-check whether it's really a kernel issue? That is, switch between 3.14 and 3.15 and confirm the problem
happens
only with 3.15. Also, for testing the sound, try like
% aplay -Dplughw -vv foo.wav
Quoted 7 lines
Quoted 3 lines
Checked again.
3.16-rc2: silence
3.14.3: works fineThen I'd suggest to bisect between 3.14 and 3.15.
Somewhat surprisingly I ended up here:
dcb32ecd9a533f47ab652c5c5680bc50a7a822cd is the first bad commit
commit dcb32ecd9a533f47ab652c5c5680bc50a7a822cd
Author: Anssi Hannula <[email protected]> Date: Tue Apr 8 12:36:42 2014 +0300
ALSA: hda - Do not assign streams in reverse order
Currently stream numbers are assigned in reverse order.
Unfortunately commit 7546abfb8e1f9933b5 ("ALSA: hda - Increment default stream numbers for AMD HDMI controllers") assumed this was not the case (specifically, it had the "old cards had single device only" => "extra unused stream numbers do not matter" assumption), causing non-working audio regressions for AMD Radeon HDMI users.
Change the stream numbers to be assigned in forward order.
The benefit is that regular audio playback will still work even if the assumed stream count is too high, downside is that a too high stream count may remain hidden.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77002
:040000 040000 6ed3a982a9600333b07a42169db5173fa75b8618 b7ff28d00007f988221ba58c9d3f501fdb3a7583 M sound
At Mon, 07 Jul 2014 16:34:10 +0100,
Quoted 66 lines · Steven Newbury
Quoted 33 lines · Takashi Iwai
At Tue, 01 Jul 2014 12:49:32 +0100,
Quoted 30 lines · Steven Newbury
Quoted 29 lines · Takashi Iwai
At Sun, 29 Jun 2014 15:09:56 +0100,
Quoted 9 lines · Steven Newbury
I sent
Takashi an email mentioning this regression a month ago, and
it's
taken me this long to send this email... :-$
Since updating to
kernel versions >=3.15 I've had no audio from my
laptop speakers.
Earlier versions worked fine.
It's a CLEVO W270EUQ laptop. TheQuoted 8 lines
output mixer device is showing up,
but no sound comes out at any
volume level.
As requested I've attached compressedalsa-info.sh
output for both the
working and non-working cases.
I'm perfectly
willing to test patches etc.Hm, I see no significant difference between 3.14 and 3.15
alsa-info.sh
outputs, and there's been very little change for VIA codecs
between
these versions. So, in short, I have no idea what went wrong. Could you double-check whether it's really a kernel issue? That is, switch between 3.14 and 3.15 and confirm the problem
happens
only with 3.15. Also, for testing the sound, try like
% aplay -Dplughw -vv foo.wavQuoted 7 lines
Quoted 3 lines
Checked again.
3.16-rc2: silence
3.14.3: works fineThen I'd suggest to bisect between 3.14 and 3.15.
Somewhat surprisingly I ended up here:
dcb32ecd9a533f47ab652c5c5680bc50a7a822cdis the first bad commitcommit
dcb32ecd9a533f47ab652c5c5680bc50a7a822cdAuthor: Anssi Hannula <[email protected]> Date: Tue Apr 8 12:36:42 2014 +0300ALSA: hda - Do not assign streams in reverse order
Currently stream numbers are assigned in reverse order.
Unfortunately commit
7546abfb8e1f9933b5("ALSA: hda - Increment default stream numbers for AMD HDMI controllers") assumed this was not the case (specifically, it had the "old cards had single device only" => "extra unused stream numbers do not matter" assumption), causing non-working audio regressions for AMD Radeon HDMI users.Change the stream numbers to be assigned in forward order.
The benefit is that regular audio playback will still work even if the assumed stream count is too high, downside is that a too high stream count may remain hidden.
Quoted 8 lines
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77002
Reported-by Christian Güdel <[email protected]>Signed-off-by Anssi Hannula <[email protected]>Cc Alex Deucher <[email protected]>Signed-off-by Takashi Iwai <[email protected]>:040000 040000
6ed3a982a9600333b07a42169db5173fa75b8618b7ff28d00007f988221ba58c9d3f501fdb3a7583M sound
Interesting. Does reverting this commit fix the issue? Just run "git revert dcb32ecd9a533f47ab652c5c5680bc50a7a822cd", and test it.
thanks,
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 136 lines · Takashi Iwai
At Mon, 07 Jul 2014 16:34:10 +0100,
Quoted 121 lines · Steven Newbury
Quoted 67 lines · Takashi Iwai
At Tue, 01 Jul 2014 12:49:32 +0100,
Quoted 62 lines · Steven Newbury
Quoted 60 lines · Takashi Iwai
At Sun, 29 Jun 2014 15:09:56 +0100,
Quoted 27 lines · Steven Newbury
I sent
Takashi an email mentioning this regression a month ago,
andit's
taken me this long to send this email... :-$
Since updating to
kernel versions >=3.15 I've had no audio from my
laptop speakers.
Earlier versions worked fine.
It's a CLEVO W270EUQ laptop. The
output mixer device is showing up,
but no sound comes out at any
volume level.
As requested I've attached compressed
alsa-info.shQuoted 7 lines
output for both the
working and non-working cases.
I'm perfectly
willing to test patches etc.
Hm, I see no significant difference between 3.14 and 3.15
alsa-info.shoutputs, and there's been very little change for VIA codecs
between
these versions. So, in short, I have no idea what went
wrong.Could you double-check whether it's really a kernel issue?
That is, switch between 3.14 and 3.15 and confirm the
problemhappens
only with 3.15. Also, for testing the sound, try like
% aplay -Dplughw -vv foo.wav
Quoted 7 lines
Quoted 5 lines
Checked again.
3.16-rc2: silence
3.14.3: works fine
Then I'd suggest to bisect between 3.14 and 3.15.
Somewhat surprisingly I ended up here:
dcb32ecd9a533f47ab652c5c5680bc50a7a822cdis the first bad commitcommit
dcb32ecd9a533f47ab652c5c5680bc50a7a822cdAuthor: Anssi Hannula <[email protected]>
Date: Tue Apr 8 12:36:42 2014 +0300
ALSA: hda - Do not assign streams in reverse order
Currently stream numbers are assigned in reverse order.
Unfortunately commit
7546abfb8e1f9933b5("ALSA: hda -
Incrementdefault stream numbers for AMD HDMI controllers") assumed
this was notthe case (specifically, it had the "old cards had single
device only"=> "extra unused stream numbers do not matter" assumption),
causingnon-working audio regressions for AMD Radeon HDMI users.
Change the stream numbers to be assigned in forward order.
The benefit is that regular audio playback will still work
even if theassumed stream count is too high, downside is that a too high
streamcount may remain hidden.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77002
Reported-by Christian Güdel <[email protected]>Signed-off-by Anssi Hannula <[email protected]>Quoted 8 lines
Cc Alex Deucher <[email protected]>Signed-off-by Takashi Iwai <[email protected]>:040000 040000
6ed3a982a9600333b07a42169db5173fa75b8618b7ff28d00007f988221ba58c9d3f501fdb3a7583M sound
Quoted 7 lines
Interesting. Does reverting this commit fix the issue?
Just run "git revert
dcb32ecd9a533f47ab652c5c5680bc50a7a822cd", andtest it.
I just did this on top of my rebased local git tree off linus/master and indeed reverting does make the speakers work again.*
Quoted 9 lines
thanks,
Takashi
​
At Mon, 07 Jul 2014 17:05:43 +0100,
Quoted 141 lines · Steven Newbury
Quoted 137 lines · Takashi Iwai
At Mon, 07 Jul 2014 16:34:10 +0100,
Quoted 121 lines · Steven Newbury
Quoted 67 lines · Takashi Iwai
At Tue, 01 Jul 2014 12:49:32 +0100,
Quoted 62 lines · Steven Newbury
Quoted 60 lines · Takashi Iwai
At Sun, 29 Jun 2014 15:09:56 +0100,
Quoted 27 lines · Steven Newbury
I sent
Takashi an email mentioning this regression a month ago,
andit's
taken me this long to send this email... :-$
Since updating to
kernel versions >=3.15 I've had no audio from my
laptop speakers.
Earlier versions worked fine.
It's a CLEVO W270EUQ laptop. The
output mixer device is showing up,
but no sound comes out at any
volume level.
As requested I've attached compressed
alsa-info.shQuoted 7 lines
output for both the
working and non-working cases.
I'm perfectly
willing to test patches etc.
Hm, I see no significant difference between 3.14 and 3.15
alsa-info.shoutputs, and there's been very little change for VIA codecs
between
these versions. So, in short, I have no idea what went
wrong.Could you double-check whether it's really a kernel issue?
That is, switch between 3.14 and 3.15 and confirm the
problemhappens
only with 3.15. Also, for testing the sound, try like
% aplay -Dplughw -vv foo.wav
Quoted 7 lines
Quoted 5 lines
Checked again.
3.16-rc2: silence
3.14.3: works fine
Then I'd suggest to bisect between 3.14 and 3.15.
Somewhat surprisingly I ended up here:
dcb32ecd9a533f47ab652c5c5680bc50a7a822cdis the first bad commitcommit
dcb32ecd9a533f47ab652c5c5680bc50a7a822cdAuthor: Anssi Hannula <[email protected]>
Date: Tue Apr 8 12:36:42 2014 +0300
ALSA: hda - Do not assign streams in reverse order
Currently stream numbers are assigned in reverse order.
Unfortunately commit
7546abfb8e1f9933b5("ALSA: hda -
Incrementdefault stream numbers for AMD HDMI controllers") assumed
this was notthe case (specifically, it had the "old cards had single
device only"=> "extra unused stream numbers do not matter" assumption),
causingnon-working audio regressions for AMD Radeon HDMI users.
Change the stream numbers to be assigned in forward order.
The benefit is that regular audio playback will still work
even if theassumed stream count is too high, downside is that a too high
streamcount may remain hidden.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77002
Reported-by Christian Güdel <[email protected]>Signed-off-by Anssi Hannula <[email protected]>Quoted 8 lines
Cc Alex Deucher <[email protected]>Signed-off-by Takashi Iwai <[email protected]>:040000 040000
6ed3a982a9600333b07a42169db5173fa75b8618b7ff28d00007f988221ba58c9d3f501fdb3a7583M soundInteresting. Does reverting this commit fix the issue?
Quoted 8 lines
Quoted 5 lines
Just run "git revert
dcb32ecd9a533f47ab652c5c5680bc50a7a822cd", andtest it.
I just did this on top of my rebased local git tree off linus/master and indeed reverting does make the speakers work again.*
OK, thanks for confirmation.
So, by some reason, the controller (or codec) needs to use the last entry (in this case it's Panther Point). I cannot understand why this fails, but it's so...
The patch below does revert conditionally only for Intel controller chips. This should work instead of git revert. Let me know if it really works for you.
But, we still want to understand why. Maybe assigning the device manually to an explicit value and figuring out which dev# doesn't work would be helpful.
thanks,
Takashi
---
sound/pci/hda/hda_controller.c +2 -1
@@ -194,7 +194,8 @@ azx_assign_device(struct azx *chip, struct snd_pcm_substream *substream)dsp_unlock (azx_dev);return azx_dev; } -if (!res) +if (!res || + (chip->driver_caps &AZX_DCAPS_REVERSE_ASSIGN )) res = azx_dev; }dsp_unlock (azx_dev);
sound/pci/hda/hda_intel.c +1 -1
@@ -272,7 +272,7 @@ enum {/* quirks for Intel PCH */ #define AZX_DCAPS_INTEL_PCH_NOPM \ (AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \ - AZX_DCAPS_COUNT_LPIB_DELAY) + AZX_DCAPS_COUNT_LPIB_DELAY | AZX_DCAPS_REVERSE_ASSIGN)#define AZX_DCAPS_INTEL_PCH \ (AZX_DCAPS_INTEL_PCH_NOPM | AZX_DCAPS_PM_RUNTIME)
sound/pci/hda/hda_priv.h +1 -0
@@ -166,6 +166,7 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };#define AZX_DCAPS_BUFSIZE (1 << 21)/* no buffer size alignment */ #define AZX_DCAPS_ALIGN_BUFSIZE (1 << 22)/* buffer size alignment */ #define AZX_DCAPS_4K_BDLE_BOUNDARY (1 << 23)/* BDLE in 4k boundary */ +#define AZX_DCAPS_REVERSE_ASSIGN (1 << 24)/* Assign devices in reverse order */ #define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25)/* Take LPIB as delay */ #define AZX_DCAPS_PM_RUNTIME (1 << 26)/* runtime PM support */ #define AZX_DCAPS_I915_POWERWELL (1 << 27)/* HSW i915 powerwell support */
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 110 lines · Takashi Iwai
At Mon, 07 Jul 2014 17:05:43 +0100,
Quoted 93 lines · Steven Newbury
Quoted 6 lines · Takashi Iwai
At Mon, 07 Jul 2014 16:34:10 +0100,
Quoted 4 lines · Steven Newbury
Quoted 3 lines · Takashi Iwai
At Tue, 01 Jul 2014 12:49:32 +0100,
Quoted 1 line · Steven Newbury
On Mon, 2014-06-30 at 11:24 +0200, Takashi Iwai
Quoted 4 lines · wrote:
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
At Sun, 29 Jun 2014 15:09:56 +0100,
Quoted 2 lines · Steven Newbury
I sent
Takashi an email mentioning this regression amonth ago,
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
and
it's
taken me this long to send this email... :-$
Since updating toQuoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
kernel versions >=3.15 I've had no audio from my
laptop speakers.
Earlier versions worked fine.
It's a CLEVO W270EUQ laptop. The
output mixer device is showing up,
but no sound comes out at any
volume level.
As requested I've attached compressed
alsa-info.shQuoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 4 lines
output for both the
working and non-working cases.
I'm perfectly
willing to test patches etc.Hm, I see no significant difference between 3.14
and 3.15
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
alsa-info.sh
outputs, and there's been very little change forVIA codecs
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
between
these versions. So, in short, I have no idea whatwent
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
wrong.
Could you double-check whether it's really akernel issue?
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
That is, switch between 3.14 and 3.15 and confirm
the
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
problem
happens
only with 3.15. Also, for testing the sound, trylike
Quoted 7 lines
Quoted 7 lines
Quoted 5 lines
Quoted 4 lines
Quoted 1 line
% aplay -Dplughw -vv foo.wav
Checked again.
3.16-rc2: silence
3.14.3: works fineThen I'd suggest to bisect between 3.14 and 3.15.
Somewhat surprisingly I ended up here:
dcb32ecd9a533f47ab652c5c5680bc50a7a822cdis the first badcommit
Quoted 5 lines
Quoted 5 lines
commit
dcb32ecd9a533f47ab652c5c5680bc50a7a822cd
Author: Anssi Hannula <[email protected]>
Date: Tue Apr 8 12:36:42 2014 +0300
ALSA: hda - Do not assign streams in reverse order Currently stream numbers are assigned in reverseorder.
Quoted 3 lines
Quoted 3 lines
Unfortunately commit 7546abfb8e1f9933b5 ("ALSA: hda -Increment
default stream numbers for AMD HDMI controllers")assumed
Quoted 2 lines
Quoted 2 lines
this was not
the case (specifically, it had the "old cards hadsingle
Quoted 2 lines
Quoted 2 lines
device only"
=> "extra unused stream numbers do not matter"assumption),
Quoted 2 lines
Quoted 2 lines
causing
non-working audio regressions for AMD Radeon HDMIusers.
Quoted 1 line
Quoted 1 line
Change the stream numbers to be assigned in forward
order.
Quoted 1 line
Quoted 1 line
The benefit is that regular audio playback will still
work
Quoted 2 lines
Quoted 2 lines
even if the
assumed stream count is too high, downside is that atoo high
Quoted 3 lines
Quoted 3 lines
stream
count may remain hidden.
Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=77002
Quoted 8 lines
Quoted 7 lines
Reported-by Christian Güdel <[email protected]>Signed-off-by Anssi Hannula <[email protected]>Cc Alex Deucher <[email protected]>Signed-off-by Takashi Iwai <[email protected]>:040000 040000
6ed3a982a9600333b07a42169db5173fa75b8618b7ff28d00007f988221ba58c9d3f501fdb3a7583M soundQuoted 8 lines
Quoted 2 lines
Interesting. Does reverting this commit fix the issue? Just run "git revert
dcb32ecd9a533f47ab652c5c5680bc50a7a822cd", andQuoted 2 lines
test it.
I just did this on top of my rebased local git tree off
linus/master
and indeed reverting does make the speakers work again.*OK, thanks for confirmation.
So, by some reason, the controller (or codec) needs to use the last entry (in this case it's Panther Point). I cannot understand why this
fails, but it's so...
Quoted 4 lines
The patch below does revert conditionally only for Intel controller chips. This should work instead of git revert. Let me know if it really works for you.
Indeed t works.
Quoted 4 lines
But, we still want to understand why. Maybe assigning the device manually to an explicit value and figuring out which dev# doesn't work
would be helpful.
How do you want me to test this?
Quoted 53 lines
thanks,
Takashi
---
sound/pci/hda/hda_controller.c +2
-1@@ -194,7 +194,8 @@ azx_assign_device(struct azx *chip, struct snd_pcm_substream *substream)dsp_unlock (azx_dev );return azx_dev; } -if (!res) +if (!res || + (chip->driver_caps &AZX_DCAPS_REVERSE_ASSIGN )) res = azx_dev; }dsp_unlock(azx_dev);sound/pci/hda/hda_intel.c +1
-1@@ -272,7 +272,7 @@ enum {/* quirks for Intel PCH */ #define AZX_DCAPS_INTEL_PCH_NOPM \ (AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \ - AZX_DCAPS_COUNT_LPIB_DELAY) + AZX_DCAPS_COUNT_LPIB_DELAY | AZX_DCAPS_REVERSE_ASSIGN)#define AZX_DCAPS_INTEL_PCH \ (AZX_DCAPS_INTEL_PCH_NOPM | AZX_DCAPS_PM_RUNTIME)sound/pci/hda/hda_priv.h +1
-0@@ -166,6 +166,7 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };#define AZX_DCAPS_BUFSIZE (1 << 21)/* no buffer size alignment */ #define AZX_DCAPS_ALIGN_BUFSIZE (1 << 22)/* buffer size alignment */ #define AZX_DCAPS_4K_BDLE_BOUNDARY (1 << 23)/* BDLE in 4k boundary */ +#define AZX_DCAPS_REVERSE_ASSIGN (1 << 24)/* Assign devices in reverse order */
#defineAZX_DCAPS_COUNT_LPIB_DELAY(1 << 25) /* Take LPIB as delay
*/
#defineAZX_DCAPS_PM_RUNTIME(1 << 26) /* runtime PM support */
#defineAZX_DCAPS_I915_POWERWELL(1 << 27) /* HSW i915 powerwell
support */
At Sat, 12 Jul 2014 00:20:45 +0100,
Quoted 6 lines · Steven Newbury
Quoted 5 lines
The patch below does revert conditionally only for Intel controller chips. This should work instead of git revert. Let me know if it really works for you.
Indeed t works.
OK, I queued the fix, with Cc to stable now.
Quoted 5 lines
Quoted 4 lines
But, we still want to understand why. Maybe assigning the device manually to an explicit value and figuring out which dev# doesn't work
would be helpful.How do you want me to test this?
Specify directly the stream number assigned to a PCM playback. Change dev to a different value, and see whether it works while keep nums = 1. dev = 0 is reserved for the capture stream, so use other values.
Test this only with onboard analog, and better to avoid PulseAudio. Fixated numbers would break HDMI audio badly.
thanks,
Takashi
---
sound/pci/hda/hda_controller.c +2 -2
@@ -178,8 +178,8 @@ azx_assign_device(struct azx *chip, struct snd_pcm_substream *substream) (substream->stream +1 );if (substream->stream ==SNDRV_PCM_STREAM_PLAYBACK ) { - dev = chip->playback_index_offset; - nums = chip->playback_streams; + dev =4 ; + nums =1 ; }else { dev = chip->capture_index_offset; nums = chip->capture_streams;