Skip to contentSkip to conversation

mic doesn't work with hda-intel/AD1983 driver

DISCUSSION Takashi Iwai 2 participants 2 messages Aug 29, 2007 3 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): s5hzm0c2bgj.wl%[email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw

At Wed, 29 Aug 2007 10:49:43 +0800,

Quoted 12 lines · Shuduo Sang

$alsactl -f sound store

$ cat sound
        control.10 {
                comment.access 'read write'
                comment.type BOOLEAN
                comment.count 2
                iface MIXER
                name 'Mic Playback Switch'
                value.0 true
                value.1 true
        }

You should mute this. Otherwise you'll hear the sound from mic as analog-loopback.

Quoted 10 lines
        control.15 {
                comment.access 'read write'
                comment.type INTEGER
                comment.count 2
                comment.range '0 - 3'
                iface MIXER
                name 'Mic Boost'
                value.0 0
                value.1 0
        }

Raise this volume.

Quoted 9 lines

control.17 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 false
value.1 false
}

Turn on this. Otherwise you cannot record.

Takashi

#4 lore raw
Quoted 29 lines · Takashi Iwai

At Wed, 29 Aug 2007 10:49:43 +0800,

Quoted 12 lines · Shuduo Sang

$alsactl -f sound store

$ cat sound
        control.10 {
                comment.access 'read write'
                comment.type BOOLEAN
                comment.count 2
                iface MIXER
                name 'Mic Playback Switch'
                value.0 true
                value.1 true
        }

You should mute this. Otherwise you'll hear the sound from mic as analog-loopback.

Quoted 10 lines
        control.15 {
                comment.access 'read write'
                comment.type INTEGER
                comment.count 2
                comment.range '0 - 3'
                iface MIXER
                name 'Mic Boost'
                value.0 0
                value.1 0
        }
Quoted 1 line

Raise this volume.

my mic works with raising mic boost volume. thanks.

Quoted 16 lines
Quoted 10 lines

control.17 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 false
value.1 false
}

Turn on this. Otherwise you cannot record.

Takashi