ALC892, Clevo P150HM: Input Source gets reset to "Mic" every resume
Hi,
whenever I resume the machine, the Input Source would get changed back from "Internal Mic" to "Mic". This is a bit annoying, because pulseaudio is unaware of that change. As a result, everything looks fine in pavucontrol but no sound gets recorded. A quick look at alsamixer -c0 revealed the problem. My alsa info:
http://www.alsa-project.org/db/?f=c5776b615a5f3b9ae624e4250fb0c2b69118ce26
This is unrelated to the other problems I have been reporting, since this happens on a mostly-stock Fedora 3.1.2 kernel (the patch I added deals with xhci, not alsa).
Regards,
Julian
2011/12/4 Julian Sikorski <[email protected]>:
Quoted 8 lines
Hi,
whenever I resume the machine, the Input Source would get changed back from "Internal Mic" to "Mic". This is a bit annoying, because pulseaudio is unaware of that change. As a result, everything looks fine in pavucontrol but no sound gets recorded. A quick look at alsamixer -c0 revealed the problem. My alsa info:
Quoted 6 lines
http://www.alsa-project.org/db/?f=c5776b615a5f3b9ae624e4250fb0c2b69118ce26
This is unrelated to the other problems I have been reporting, since this happens on a mostly-stock Fedora 3.1.2 kernel (the patch I added deals with xhci, not alsa).
As alc892 has two [Audio Mixer] instead of [Audio Selector]
I wonder whether the hardware support a more an advanced "Input Source" controls to support
"Mic"
"Internal Mic"
"Line"
"Mic + Internal Mic"
"Mic + Line"
"Internal Mic" + "Line"
instead of the current implementation
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Internal Mic' 'Line'
Item0: 'Mic'
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Input Source", index=1, device=0
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x800x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 12
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b 0x12
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Input Source", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x800x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
2011/12/4 Julian Sikorski <[email protected]>:
Quoted 8 lines
Hi,
whenever I resume the machine, the Input Source would get changed back from "Internal Mic" to "Mic". This is a bit annoying, because pulseaudio is unaware of that change. As a result, everything looks fine in pavucontrol but no sound gets recorded. A quick look at alsamixer -c0 revealed the problem. My alsa info:
Quoted 5 lines
http://www.alsa-project.org/db/?f=c5776b615a5f3b9ae624e4250fb0c2b69118ce26
This is unrelated to the other problems I have been reporting, since this happens on a mostly-stock Fedora 3.1.2 kernel (the patch I added deals with xhci, not alsa).
The problem seem can be reproduced by using hda-emu,
it is init_capsrc_for_pin() and alc_auto_init_input_src() write value to cache before snd_hda_codec_resume_app() from cache
Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]
Quoted 1 line
set 28 1
send: NID=0x23, VERB=0x360(set_amp_gain_mute,I:L#0), PARM=0x80
send: NID=0x23, VERB=0x350(set_amp_gain_mute,I:R#0), PARM=0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0
Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Internal Mic]
pm
** SUSPENDING **
...
** RESUMING **
PM-Notified
...exec_init_verbs
...
init_capsrc_for_pin 18
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x0
receive: 0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x0
receive: 0x0
init capsrc for pin 19
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x1
receive: 0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x1
receive: 0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0 init capsrc for pin 1a
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x2
receive: 0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x0
alc_auto_init_input_src
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x80
send: NID=0x23, VERB=0x352(set_amp_gain_mute,I:R#2), PARM=0x80
snd_hda_codec_resume_app
send: NID=0x23, VERB=0x363(set_amp_gain_mute,I:L#3), PARM=0x80
send: NID=0x23, VERB=0x353(set_amp_gain_mute,I:R#3), PARM=0x80
send: NID=0x23, VERB=0x364(set_amp_gain_mute,I:L#4), PARM=0x80
send: NID=0x23, VERB=0x354(set_amp_gain_mute,I:R#4), PARM=0x80
send: NID=0x23, VERB=0x365(set_amp_gain_mute,I:L#5), PARM=0x80
send: NID=0x23, VERB=0x355(set_amp_gain_mute,I:R#5), PARM=0x80
send: NID=0x23, VERB=0x366(set_amp_gain_mute,I:L#6), PARM=0x80
send: NID=0x23, VERB=0x356(set_amp_gain_mute,I:R#6), PARM=0x80
send: NID=0x23, VERB=0x367(set_amp_gain_mute,I:L#7), PARM=0x80
send: NID=0x23, VERB=0x357(set_amp_gain_mute,I:R#7), PARM=0x80
send: NID=0x23, VERB=0x368(set_amp_gain_mute,I:L#8), PARM=0x80
send: NID=0x23, VERB=0x358(set_amp_gain_mute,I:R#8), PARM=0x80
send: NID=0x23, VERB=0x369(set_amp_gain_mute,I:L#9), PARM=0x80
send: NID=0x23, VERB=0x359(set_amp_gain_mute,I:R#9), PARM=0x80
send: NID=0x23, VERB=0x36a(set_amp_gain_mute,I:L#10), PARM=0x80
send: NID=0x23, VERB=0x35a(set_amp_gain_mute,I:R#10), PARM=0x80
...
Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]
W dniu 09.12.2011 14:32, Raymond Yau pisze:
Quoted 83 lines
2011/12/4 Julian Sikorski <[email protected]>:
Quoted 8 lines
Hi,
whenever I resume the machine, the Input Source would get changed back from "Internal Mic" to "Mic". This is a bit annoying, because pulseaudio is unaware of that change. As a result, everything looks fine in pavucontrol but no sound gets recorded. A quick look at alsamixer -c0 revealed the problem. My alsa info:
Quoted 5 lines
http://www.alsa-project.org/db/?f=c5776b615a5f3b9ae624e4250fb0c2b69118ce26
This is unrelated to the other problems I have been reporting, since this happens on a mostly-stock Fedora 3.1.2 kernel (the patch I added deals with xhci, not alsa).
The problem seem can be reproduced by using hda-emu,
it isinit_capsrc_for_pin()andalc_auto_init_input_src()write value to cache beforesnd_hda_codec_resume_app()from cacheQuoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]Quoted 1 line
set 28 1
send: NID=0x23, VERB=0x360(set_amp_gain_mute,I:L#0), PARM=0x80
send: NID=0x23, VERB=0x350(set_amp_gain_mute,I:R#0), PARM=0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Internal Mic]pm
** SUSPENDING **
...
** RESUMING **
PM-Notified
...exec_init_verbs
...
init_capsrc_for_pin18
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x0
receive:0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x0
receive:0x0
init capsrc for pin 19
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0 init capsrc for pin 1a
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x2
receive:0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x0
alc_auto_init_input_src
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x80
send: NID=0x23, VERB=0x352(set_amp_gain_mute,I:R#2), PARM=0x80
snd_hda_codec_resume_app
send: NID=0x23, VERB=0x363(set_amp_gain_mute,I:L#3), PARM=0x80
send: NID=0x23, VERB=0x353(set_amp_gain_mute,I:R#3), PARM=0x80
send: NID=0x23, VERB=0x364(set_amp_gain_mute,I:L#4), PARM=0x80
send: NID=0x23, VERB=0x354(set_amp_gain_mute,I:R#4), PARM=0x80
send: NID=0x23, VERB=0x365(set_amp_gain_mute,I:L#5), PARM=0x80
send: NID=0x23, VERB=0x355(set_amp_gain_mute,I:R#5), PARM=0x80
send: NID=0x23, VERB=0x366(set_amp_gain_mute,I:L#6), PARM=0x80
send: NID=0x23, VERB=0x356(set_amp_gain_mute,I:R#6), PARM=0x80
send: NID=0x23, VERB=0x367(set_amp_gain_mute,I:L#7), PARM=0x80
send: NID=0x23, VERB=0x357(set_amp_gain_mute,I:R#7), PARM=0x80
send: NID=0x23, VERB=0x368(set_amp_gain_mute,I:L#8), PARM=0x80
send: NID=0x23, VERB=0x358(set_amp_gain_mute,I:R#8), PARM=0x80
send: NID=0x23, VERB=0x369(set_amp_gain_mute,I:L#9), PARM=0x80
send: NID=0x23, VERB=0x359(set_amp_gain_mute,I:R#9), PARM=0x80
send: NID=0x23, VERB=0x36a(set_amp_gain_mute,I:L#10), PARM=0x80
send: NID=0x23, VERB=0x35a(set_amp_gain_mute,I:R#10), PARM=0x80
...
Quoted 3 lines
Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]
The problem still exists in 3.2.7-1.fc16.x86_64 kernel, is there any chance for a fix?
Julian
2012/2/24, Julian Sikorski <[email protected]>:
Quoted 84 lines
W dniu 09.12.2011 14:32, Raymond Yau pisze:
Quoted 83 lines
2011/12/4 Julian Sikorski <[email protected]>:
Quoted 8 lines
Hi,
whenever I resume the machine, the Input Source would get changed back from "Internal Mic" to "Mic". This is a bit annoying, because pulseaudio is unaware of that change. As a result, everything looks fine in pavucontrol but no sound gets recorded. A quick look at alsamixer -c0 revealed the problem. My alsa info:
Quoted 5 lines
http://www.alsa-project.org/db/?f=c5776b615a5f3b9ae624e4250fb0c2b69118ce26
This is unrelated to the other problems I have been reporting, since this happens on a mostly-stock Fedora 3.1.2 kernel (the patch I added deals with xhci, not alsa).
The problem seem can be reproduced by using hda-emu,
it isinit_capsrc_for_pin()andalc_auto_init_input_src()write value to cache beforesnd_hda_codec_resume_app()from cacheQuoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]Quoted 1 line
set 28 1
send: NID=0x23, VERB=0x360(set_amp_gain_mute,I:L#0), PARM=0x80
send: NID=0x23, VERB=0x350(set_amp_gain_mute,I:R#0), PARM=0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Internal Mic]pm
** SUSPENDING **
...
** RESUMING **
PM-Notified
...exec_init_verbs
...
init_capsrc_for_pin18
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x0
receive:0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x0
receive:0x0
init capsrc for pin 19
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0 init capsrc for pin 1a
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x2
receive:0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x0
alc_auto_init_input_src
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x80
send: NID=0x23, VERB=0x352(set_amp_gain_mute,I:R#2), PARM=0x80
snd_hda_codec_resume_app
send: NID=0x23, VERB=0x363(set_amp_gain_mute,I:L#3), PARM=0x80
send: NID=0x23, VERB=0x353(set_amp_gain_mute,I:R#3), PARM=0x80
send: NID=0x23, VERB=0x364(set_amp_gain_mute,I:L#4), PARM=0x80
send: NID=0x23, VERB=0x354(set_amp_gain_mute,I:R#4), PARM=0x80
send: NID=0x23, VERB=0x365(set_amp_gain_mute,I:L#5), PARM=0x80
send: NID=0x23, VERB=0x355(set_amp_gain_mute,I:R#5), PARM=0x80
send: NID=0x23, VERB=0x366(set_amp_gain_mute,I:L#6), PARM=0x80
send: NID=0x23, VERB=0x356(set_amp_gain_mute,I:R#6), PARM=0x80
send: NID=0x23, VERB=0x367(set_amp_gain_mute,I:L#7), PARM=0x80
send: NID=0x23, VERB=0x357(set_amp_gain_mute,I:R#7), PARM=0x80
send: NID=0x23, VERB=0x368(set_amp_gain_mute,I:L#8), PARM=0x80
send: NID=0x23, VERB=0x358(set_amp_gain_mute,I:R#8), PARM=0x80
send: NID=0x23, VERB=0x369(set_amp_gain_mute,I:L#9), PARM=0x80
send: NID=0x23, VERB=0x359(set_amp_gain_mute,I:R#9), PARM=0x80
send: NID=0x23, VERB=0x36a(set_amp_gain_mute,I:L#10), PARM=0x80
send: NID=0x23, VERB=0x35a(set_amp_gain_mute,I:R#10), PARM=0x80
...
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]The problem still exists in 3.2.7-1.fc16.x86_64 kernel, is there any chance for a fix?
Julian
A dirty hack is to swap the order of the external mic and internal mic at the end of sort_autocfg_input_pins()
+ if (cfg->num_inputs > 1) {
+ struct auto_pin_cfg_item tmp;
+ tmp = cfg->inputs[0];
+ cfg->inputs[0] = cfg->inputs[1];
+ cfg->inputs[1] = tmp;
+ }
25 Input Source:0
ITEM: 0:Internal Mic, 1:Mic, 2:Line, VAL: [Internal Mic]
At Thu, 23 Feb 2012 20:11:44 +0100,
Quoted 85 lines · Julian Sikorski
W dniu 09.12.2011 14:32, Raymond Yau pisze:
Quoted 83 lines
2011/12/4 Julian Sikorski <[email protected]>:
Quoted 8 lines
Hi,
whenever I resume the machine, the Input Source would get changed back from "Internal Mic" to "Mic". This is a bit annoying, because pulseaudio is unaware of that change. As a result, everything looks fine in pavucontrol but no sound gets recorded. A quick look at alsamixer -c0 revealed the problem. My alsa info:
Quoted 5 lines
http://www.alsa-project.org/db/?f=c5776b615a5f3b9ae624e4250fb0c2b69118ce26
This is unrelated to the other problems I have been reporting, since this happens on a mostly-stock Fedora 3.1.2 kernel (the patch I added deals with xhci, not alsa).
The problem seem can be reproduced by using hda-emu,
it isinit_capsrc_for_pin()andalc_auto_init_input_src()write value to cache beforesnd_hda_codec_resume_app()from cacheQuoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]Quoted 1 line
set 28 1
send: NID=0x23, VERB=0x360(set_amp_gain_mute,I:L#0), PARM=0x80
send: NID=0x23, VERB=0x350(set_amp_gain_mute,I:R#0), PARM=0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Internal Mic]pm
** SUSPENDING **
...
** RESUMING **
PM-Notified
...exec_init_verbs
...
init_capsrc_for_pin18
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x0
receive:0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x0
receive:0x0
init capsrc for pin 19
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0 init capsrc for pin 1a
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x2
receive:0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x0
alc_auto_init_input_src
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x80
send: NID=0x23, VERB=0x352(set_amp_gain_mute,I:R#2), PARM=0x80
snd_hda_codec_resume_app
send: NID=0x23, VERB=0x363(set_amp_gain_mute,I:L#3), PARM=0x80
send: NID=0x23, VERB=0x353(set_amp_gain_mute,I:R#3), PARM=0x80
send: NID=0x23, VERB=0x364(set_amp_gain_mute,I:L#4), PARM=0x80
send: NID=0x23, VERB=0x354(set_amp_gain_mute,I:R#4), PARM=0x80
send: NID=0x23, VERB=0x365(set_amp_gain_mute,I:L#5), PARM=0x80
send: NID=0x23, VERB=0x355(set_amp_gain_mute,I:R#5), PARM=0x80
send: NID=0x23, VERB=0x366(set_amp_gain_mute,I:L#6), PARM=0x80
send: NID=0x23, VERB=0x356(set_amp_gain_mute,I:R#6), PARM=0x80
send: NID=0x23, VERB=0x367(set_amp_gain_mute,I:L#7), PARM=0x80
send: NID=0x23, VERB=0x357(set_amp_gain_mute,I:R#7), PARM=0x80
send: NID=0x23, VERB=0x368(set_amp_gain_mute,I:L#8), PARM=0x80
send: NID=0x23, VERB=0x358(set_amp_gain_mute,I:R#8), PARM=0x80
send: NID=0x23, VERB=0x369(set_amp_gain_mute,I:L#9), PARM=0x80
send: NID=0x23, VERB=0x359(set_amp_gain_mute,I:R#9), PARM=0x80
send: NID=0x23, VERB=0x36a(set_amp_gain_mute,I:L#10), PARM=0x80
send: NID=0x23, VERB=0x35a(set_amp_gain_mute,I:R#10), PARM=0x80
...
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]The problem still exists in 3.2.7-1.fc16.x86_64 kernel, is there any chance for a fix?
Does the patch below fix?
Takashi
---
sound/pci/hda/patch_realtek.c +1 -1
@@ -4147,7 +4147,7 @@ static void alc_auto_init_input_src(struct hda_codec *codec)else nums = spec->num_adc_nids;for (c =0 ; c < nums; c++) -alc_mux_select (codec,0 , spec->cur_mux[c], true); +alc_mux_select (codec, c, spec->cur_mux[c], true); }/* add mic boosts if needed */
W dniu 24.02.2012 10:43, Takashi Iwai pisze:
Quoted 90 lines
At Thu, 23 Feb 2012 20:11:44 +0100,
Quoted 88 lines · Julian Sikorski
W dniu 09.12.2011 14:32, Raymond Yau pisze:
Quoted 86 lines
2011/12/4 Julian Sikorski <[email protected]>:
Quoted 8 lines
Hi,
whenever I resume the machine, the Input Source would get changed back from "Internal Mic" to "Mic". This is a bit annoying, because pulseaudio is unaware of that change. As a result, everything looks fine in pavucontrol but no sound gets recorded. A quick look at alsamixer -c0 revealed the problem. My alsa info:
Quoted 5 lines
http://www.alsa-project.org/db/?f=c5776b615a5f3b9ae624e4250fb0c2b69118ce26
This is unrelated to the other problems I have been reporting, since this happens on a mostly-stock Fedora 3.1.2 kernel (the patch I added deals with xhci, not alsa).
The problem seem can be reproduced by using hda-emu,
it isinit_capsrc_for_pin()andalc_auto_init_input_src()write value to cache beforesnd_hda_codec_resume_app()from cacheQuoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]Quoted 1 line
set 28 1
send: NID=0x23, VERB=0x360(set_amp_gain_mute,I:L#0), PARM=0x80
send: NID=0x23, VERB=0x350(set_amp_gain_mute,I:R#0), PARM=0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Internal Mic]pm
** SUSPENDING **
...
** RESUMING **
PM-Notified
...exec_init_verbs
...
init_capsrc_for_pin18
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x0
receive:0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x0
receive:0x0
init capsrc for pin 19
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0 init capsrc for pin 1a
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x2
receive:0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x0
alc_auto_init_input_src
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x80
send: NID=0x23, VERB=0x352(set_amp_gain_mute,I:R#2), PARM=0x80
snd_hda_codec_resume_app
send: NID=0x23, VERB=0x363(set_amp_gain_mute,I:L#3), PARM=0x80
send: NID=0x23, VERB=0x353(set_amp_gain_mute,I:R#3), PARM=0x80
send: NID=0x23, VERB=0x364(set_amp_gain_mute,I:L#4), PARM=0x80
send: NID=0x23, VERB=0x354(set_amp_gain_mute,I:R#4), PARM=0x80
send: NID=0x23, VERB=0x365(set_amp_gain_mute,I:L#5), PARM=0x80
send: NID=0x23, VERB=0x355(set_amp_gain_mute,I:R#5), PARM=0x80
send: NID=0x23, VERB=0x366(set_amp_gain_mute,I:L#6), PARM=0x80
send: NID=0x23, VERB=0x356(set_amp_gain_mute,I:R#6), PARM=0x80
send: NID=0x23, VERB=0x367(set_amp_gain_mute,I:L#7), PARM=0x80
send: NID=0x23, VERB=0x357(set_amp_gain_mute,I:R#7), PARM=0x80
send: NID=0x23, VERB=0x368(set_amp_gain_mute,I:L#8), PARM=0x80
send: NID=0x23, VERB=0x358(set_amp_gain_mute,I:R#8), PARM=0x80
send: NID=0x23, VERB=0x369(set_amp_gain_mute,I:L#9), PARM=0x80
send: NID=0x23, VERB=0x359(set_amp_gain_mute,I:R#9), PARM=0x80
send: NID=0x23, VERB=0x36a(set_amp_gain_mute,I:L#10), PARM=0x80
send: NID=0x23, VERB=0x35a(set_amp_gain_mute,I:R#10), PARM=0x80
...Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]
Quoted 7 lines
Quoted 2 lines
The problem still exists in 3.2.7-1.fc16.x86_64 kernel, is there any chance for a fix?
Does the patch below fix?
Takashi
Yes, it seems so. I don't want to get ahead of myself, but two suspend-resume cycles have passed and inputs are at Internal Mic and Mic, as expected.
Julian
At Fri, 24 Feb 2012 23:06:26 +0100,
Quoted 95 lines · Julian Sikorski
W dniu 24.02.2012 10:43, Takashi Iwai pisze:
Quoted 93 lines
At Thu, 23 Feb 2012 20:11:44 +0100,
Quoted 90 lines · Julian Sikorski
W dniu 09.12.2011 14:32, Raymond Yau pisze:
Quoted 83 lines
2011/12/4 Julian Sikorski <[email protected]>:
Quoted 8 lines
Hi,
whenever I resume the machine, the Input Source would get changed back from "Internal Mic" to "Mic". This is a bit annoying, because pulseaudio is unaware of that change. As a result, everything looks fine in pavucontrol but no sound gets recorded. A quick look at alsamixer -c0 revealed the problem. My alsa info:
Quoted 5 lines
http://www.alsa-project.org/db/?f=c5776b615a5f3b9ae624e4250fb0c2b69118ce26
This is unrelated to the other problems I have been reporting, since this happens on a mostly-stock Fedora 3.1.2 kernel (the patch I added deals with xhci, not alsa).
The problem seem can be reproduced by using hda-emu,
it isinit_capsrc_for_pin()andalc_auto_init_input_src()write value to cache beforesnd_hda_codec_resume_app()from cacheQuoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]Quoted 1 line
set 28 1
send: NID=0x23, VERB=0x360(set_amp_gain_mute,I:L#0), PARM=0x80
send: NID=0x23, VERB=0x350(set_amp_gain_mute,I:R#0), PARM=0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Internal Mic]pm
** SUSPENDING **
...
** RESUMING **
PM-Notified
...exec_init_verbs
...
init_capsrc_for_pin18
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x0
receive:0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x0
receive:0x0
init capsrc for pin 19
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0 init capsrc for pin 1a
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x2
receive:0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x0
alc_auto_init_input_src
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x80
send: NID=0x23, VERB=0x352(set_amp_gain_mute,I:R#2), PARM=0x80
snd_hda_codec_resume_app
send: NID=0x23, VERB=0x363(set_amp_gain_mute,I:L#3), PARM=0x80
send: NID=0x23, VERB=0x353(set_amp_gain_mute,I:R#3), PARM=0x80
send: NID=0x23, VERB=0x364(set_amp_gain_mute,I:L#4), PARM=0x80
send: NID=0x23, VERB=0x354(set_amp_gain_mute,I:R#4), PARM=0x80
send: NID=0x23, VERB=0x365(set_amp_gain_mute,I:L#5), PARM=0x80
send: NID=0x23, VERB=0x355(set_amp_gain_mute,I:R#5), PARM=0x80
send: NID=0x23, VERB=0x366(set_amp_gain_mute,I:L#6), PARM=0x80
send: NID=0x23, VERB=0x356(set_amp_gain_mute,I:R#6), PARM=0x80
send: NID=0x23, VERB=0x367(set_amp_gain_mute,I:L#7), PARM=0x80
send: NID=0x23, VERB=0x357(set_amp_gain_mute,I:R#7), PARM=0x80
send: NID=0x23, VERB=0x368(set_amp_gain_mute,I:L#8), PARM=0x80
send: NID=0x23, VERB=0x358(set_amp_gain_mute,I:R#8), PARM=0x80
send: NID=0x23, VERB=0x369(set_amp_gain_mute,I:L#9), PARM=0x80
send: NID=0x23, VERB=0x359(set_amp_gain_mute,I:R#9), PARM=0x80
send: NID=0x23, VERB=0x36a(set_amp_gain_mute,I:L#10), PARM=0x80
send: NID=0x23, VERB=0x35a(set_amp_gain_mute,I:R#10), PARM=0x80
...Quoted 3 lines
Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]The problem still exists in 3.2.7-1.fc16.x86_64 kernel, is there any chance for a fix?
Quoted 8 lines
Quoted 4 lines
Does the patch below fix?
Takashi
Yes, it seems so. I don't want to get ahead of myself, but two suspend-resume cycles have passed and inputs are at Internal Mic and Mic, as expected.
Thanks for checking. I committed the fix to git tree, also Cc'ed to stable.
Takashi
W dniu 25.02.2012 11:16, Takashi Iwai pisze:
Quoted 106 lines
At Fri, 24 Feb 2012 23:06:26 +0100,
Quoted 95 lines · Julian Sikorski
W dniu 24.02.2012 10:43, Takashi Iwai pisze:
Quoted 93 lines
At Thu, 23 Feb 2012 20:11:44 +0100,
Quoted 90 lines · Julian Sikorski
W dniu 09.12.2011 14:32, Raymond Yau pisze:
Quoted 83 lines
2011/12/4 Julian Sikorski <[email protected]>:
Quoted 8 lines
Hi,
whenever I resume the machine, the Input Source would get changed back from "Internal Mic" to "Mic". This is a bit annoying, because pulseaudio is unaware of that change. As a result, everything looks fine in pavucontrol but no sound gets recorded. A quick look at alsamixer -c0 revealed the problem. My alsa info:
Quoted 5 lines
http://www.alsa-project.org/db/?f=c5776b615a5f3b9ae624e4250fb0c2b69118ce26
This is unrelated to the other problems I have been reporting, since this happens on a mostly-stock Fedora 3.1.2 kernel (the patch I added deals with xhci, not alsa).
The problem seem can be reproduced by using hda-emu,
it isinit_capsrc_for_pin()andalc_auto_init_input_src()write value to cache beforesnd_hda_codec_resume_app()from cacheQuoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]Quoted 1 line
set 28 1
send: NID=0x23, VERB=0x360(set_amp_gain_mute,I:L#0), PARM=0x80
send: NID=0x23, VERB=0x350(set_amp_gain_mute,I:R#0), PARM=0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Internal Mic]pm
** SUSPENDING **
...
** RESUMING **
PM-Notified
...exec_init_verbs
...
init_capsrc_for_pin18
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x0
receive:0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x0
receive:0x0
init capsrc for pin 19
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0 init capsrc for pin 1a
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x2
receive:0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x0
alc_auto_init_input_src
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x80
send: NID=0x23, VERB=0x352(set_amp_gain_mute,I:R#2), PARM=0x80
snd_hda_codec_resume_app
send: NID=0x23, VERB=0x363(set_amp_gain_mute,I:L#3), PARM=0x80
send: NID=0x23, VERB=0x353(set_amp_gain_mute,I:R#3), PARM=0x80
send: NID=0x23, VERB=0x364(set_amp_gain_mute,I:L#4), PARM=0x80
send: NID=0x23, VERB=0x354(set_amp_gain_mute,I:R#4), PARM=0x80
send: NID=0x23, VERB=0x365(set_amp_gain_mute,I:L#5), PARM=0x80
send: NID=0x23, VERB=0x355(set_amp_gain_mute,I:R#5), PARM=0x80
send: NID=0x23, VERB=0x366(set_amp_gain_mute,I:L#6), PARM=0x80
send: NID=0x23, VERB=0x356(set_amp_gain_mute,I:R#6), PARM=0x80
send: NID=0x23, VERB=0x367(set_amp_gain_mute,I:L#7), PARM=0x80
send: NID=0x23, VERB=0x357(set_amp_gain_mute,I:R#7), PARM=0x80
send: NID=0x23, VERB=0x368(set_amp_gain_mute,I:L#8), PARM=0x80
send: NID=0x23, VERB=0x358(set_amp_gain_mute,I:R#8), PARM=0x80
send: NID=0x23, VERB=0x369(set_amp_gain_mute,I:L#9), PARM=0x80
send: NID=0x23, VERB=0x359(set_amp_gain_mute,I:R#9), PARM=0x80
send: NID=0x23, VERB=0x36a(set_amp_gain_mute,I:L#10), PARM=0x80
send: NID=0x23, VERB=0x35a(set_amp_gain_mute,I:R#10), PARM=0x80
...Quoted 3 lines
Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]The problem still exists in 3.2.7-1.fc16.x86_64 kernel, is there any chance for a fix?
Quoted 8 lines
Quoted 4 lines
Does the patch below fix?
Takashi
Yes, it seems so. I don't want to get ahead of myself, but two suspend-resume cycles have passed and inputs are at Internal Mic and Mic, as expected.
Quoted 5 lines
Thanks for checking. I committed the fix to git tree, also Cc'ed to stable.
Takashi
I cannot seem to find this patch in the 3.2 stable tree, was it rejected?
Regards,
Julian
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
W dniu 02.03.2012 19:43, Greg KH pisze:
Quoted 108 lines · Julian Sikorski
Quoted 107 lines
W dniu 25.02.2012 11:16, Takashi Iwai pisze:
Quoted 106 lines
At Fri, 24 Feb 2012 23:06:26 +0100,
Quoted 103 lines · Julian Sikorski
W dniu 24.02.2012 10:43, Takashi Iwai pisze:
Quoted 90 lines
At Thu, 23 Feb 2012 20:11:44 +0100,
Quoted 88 lines · Julian Sikorski
W dniu 09.12.2011 14:32, Raymond Yau pisze:
Quoted 86 lines
2011/12/4 Julian Sikorski <[email protected]>:
Quoted 8 lines
Hi,
whenever I resume the machine, the Input Source would get changed back from "Internal Mic" to "Mic". This is a bit annoying, because pulseaudio is unaware of that change. As a result, everything looks fine in pavucontrol but no sound gets recorded. A quick look at alsamixer -c0 revealed the problem. My alsa info:
Quoted 5 lines
http://www.alsa-project.org/db/?f=c5776b615a5f3b9ae624e4250fb0c2b69118ce26
This is unrelated to the other problems I have been reporting, since this happens on a mostly-stock Fedora 3.1.2 kernel (the patch I added deals with xhci, not alsa).
The problem seem can be reproduced by using hda-emu,
it isinit_capsrc_for_pin()andalc_auto_init_input_src()write value to cache beforesnd_hda_codec_resume_app()from cacheQuoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]Quoted 1 line
set 28 1
send: NID=0x23, VERB=0x360(set_amp_gain_mute,I:L#0), PARM=0x80
send: NID=0x23, VERB=0x350(set_amp_gain_mute,I:R#0), PARM=0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Internal Mic]pm
** SUSPENDING **
...
** RESUMING **
PM-Notified
...exec_init_verbs
...
init_capsrc_for_pin18
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x0
receive:0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x0
receive:0x0
init capsrc for pin 19
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0 init capsrc for pin 1a
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x2
receive:0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x0
alc_auto_init_input_src
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x80
send: NID=0x23, VERB=0x352(set_amp_gain_mute,I:R#2), PARM=0x80
snd_hda_codec_resume_app
send: NID=0x23, VERB=0x363(set_amp_gain_mute,I:L#3), PARM=0x80
send: NID=0x23, VERB=0x353(set_amp_gain_mute,I:R#3), PARM=0x80
send: NID=0x23, VERB=0x364(set_amp_gain_mute,I:L#4), PARM=0x80
send: NID=0x23, VERB=0x354(set_amp_gain_mute,I:R#4), PARM=0x80
send: NID=0x23, VERB=0x365(set_amp_gain_mute,I:L#5), PARM=0x80
send: NID=0x23, VERB=0x355(set_amp_gain_mute,I:R#5), PARM=0x80
send: NID=0x23, VERB=0x366(set_amp_gain_mute,I:L#6), PARM=0x80
send: NID=0x23, VERB=0x356(set_amp_gain_mute,I:R#6), PARM=0x80
send: NID=0x23, VERB=0x367(set_amp_gain_mute,I:L#7), PARM=0x80
send: NID=0x23, VERB=0x357(set_amp_gain_mute,I:R#7), PARM=0x80
send: NID=0x23, VERB=0x368(set_amp_gain_mute,I:L#8), PARM=0x80
send: NID=0x23, VERB=0x358(set_amp_gain_mute,I:R#8), PARM=0x80
send: NID=0x23, VERB=0x369(set_amp_gain_mute,I:L#9), PARM=0x80
send: NID=0x23, VERB=0x359(set_amp_gain_mute,I:R#9), PARM=0x80
send: NID=0x23, VERB=0x36a(set_amp_gain_mute,I:L#10), PARM=0x80
send: NID=0x23, VERB=0x35a(set_amp_gain_mute,I:R#10), PARM=0x80
...Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]Quoted 7 lines
Quoted 2 lines
The problem still exists in 3.2.7-1.fc16.x86_64 kernel, is there any chance for a fix?
Does the patch below fix?
Takashi
Yes, it seems so. I don't want to get ahead of myself, but two suspend-resume cycles have passed and inputs are at Internal Mic and Mic, as expected.
Quoted 8 lines
Quoted 6 lines
Quoted 5 lines
Thanks for checking. I committed the fix to git tree, also Cc'ed to stable.
Takashi
I cannot seem to find this patch in the 3.2 stable tree, was it rejected?
What is the git commit id of it in Linus's tree?
Hmm, it does not seem to be in Linus' tree yet. It is in for-linus branch of sound tree under commit 068b9394 though.
Julian
A message that is not in the archive (sent off-list or not yet received): [email protected]
W dniu 2012-03-02 23:08, Greg KH pisze:
Quoted 117 lines · Julian Sikorski
Quoted 116 lines
W dniu 02.03.2012 19:43, Greg KH pisze:
Quoted 115 lines · Julian Sikorski
Quoted 113 lines
W dniu 25.02.2012 11:16, Takashi Iwai pisze:
Quoted 106 lines
At Fri, 24 Feb 2012 23:06:26 +0100,
Quoted 95 lines · Julian Sikorski
W dniu 24.02.2012 10:43, Takashi Iwai pisze:
Quoted 93 lines
At Thu, 23 Feb 2012 20:11:44 +0100,
Quoted 90 lines · Julian Sikorski
W dniu 09.12.2011 14:32, Raymond Yau pisze:
Quoted 83 lines
2011/12/4 Julian Sikorski<[email protected]>:
Quoted 8 lines
Hi,
whenever I resume the machine, the Input Source would get changed back from "Internal Mic" to "Mic". This is a bit annoying, because pulseaudio is unaware of that change. As a result, everything looks fine in pavucontrol but no sound gets recorded. A quick look at alsamixer -c0 revealed the problem. My alsa info:
Quoted 5 lines
http://www.alsa-project.org/db/?f=c5776b615a5f3b9ae624e4250fb0c2b69118ce26
This is unrelated to the other problems I have been reporting, since this happens on a mostly-stock Fedora 3.1.2 kernel (the patch I added deals with xhci, not alsa).
The problem seem can be reproduced by using hda-emu,
it isinit_capsrc_for_pin()andalc_auto_init_input_src()write value to cache beforesnd_hda_codec_resume_app()from cacheQuoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]Quoted 1 line
set 28 1
send: NID=0x23, VERB=0x360(set_amp_gain_mute,I:L#0), PARM=0x80
send: NID=0x23, VERB=0x350(set_amp_gain_mute,I:R#0), PARM=0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Internal Mic]pm
** SUSPENDING **
...
** RESUMING **
PM-Notified
...exec_init_verbs
...
init_capsrc_for_pin18
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x0
receive:0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x0
receive:0x0
init capsrc for pin 19
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0 init capsrc for pin 1a
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x2
receive:0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x0
alc_auto_init_input_src
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x80
send: NID=0x23, VERB=0x352(set_amp_gain_mute,I:R#2), PARM=0x80
snd_hda_codec_resume_app
send: NID=0x23, VERB=0x363(set_amp_gain_mute,I:L#3), PARM=0x80
send: NID=0x23, VERB=0x353(set_amp_gain_mute,I:R#3), PARM=0x80
send: NID=0x23, VERB=0x364(set_amp_gain_mute,I:L#4), PARM=0x80
send: NID=0x23, VERB=0x354(set_amp_gain_mute,I:R#4), PARM=0x80
send: NID=0x23, VERB=0x365(set_amp_gain_mute,I:L#5), PARM=0x80
send: NID=0x23, VERB=0x355(set_amp_gain_mute,I:R#5), PARM=0x80
send: NID=0x23, VERB=0x366(set_amp_gain_mute,I:L#6), PARM=0x80
send: NID=0x23, VERB=0x356(set_amp_gain_mute,I:R#6), PARM=0x80
send: NID=0x23, VERB=0x367(set_amp_gain_mute,I:L#7), PARM=0x80
send: NID=0x23, VERB=0x357(set_amp_gain_mute,I:R#7), PARM=0x80
send: NID=0x23, VERB=0x368(set_amp_gain_mute,I:L#8), PARM=0x80
send: NID=0x23, VERB=0x358(set_amp_gain_mute,I:R#8), PARM=0x80
send: NID=0x23, VERB=0x369(set_amp_gain_mute,I:L#9), PARM=0x80
send: NID=0x23, VERB=0x359(set_amp_gain_mute,I:R#9), PARM=0x80
send: NID=0x23, VERB=0x36a(set_amp_gain_mute,I:L#10), PARM=0x80
send: NID=0x23, VERB=0x35a(set_amp_gain_mute,I:R#10), PARM=0x80
...Quoted 3 lines
Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]The problem still exists in 3.2.7-1.fc16.x86_64 kernel, is there any chance for a fix?
Quoted 8 lines
Quoted 4 lines
Does the patch below fix?
Takashi
Yes, it seems so. I don't want to get ahead of myself, but two suspend-resume cycles have passed and inputs are at Internal Mic and Mic, as expected.
Quoted 5 lines
Thanks for checking. I committed the fix to git tree, also Cc'ed to stable.
Takashi
I cannot seem to find this patch in the 3.2 stable tree, was it rejected?
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
What is the git commit id of it in Linus's tree?
Hmm, it does not seem to be in Linus' tree yet. It is in for-linus branch of sound tree under commit
068b9394though.Then there is nothing I can do about it at this point in time.
greg k-h
I see, thanks for clarification.
Regards,
Julian
W dniu 02.03.2012 23:08, Greg KH pisze:
Quoted 117 lines · Julian Sikorski
Quoted 116 lines
W dniu 02.03.2012 19:43, Greg KH pisze:
Quoted 115 lines · Julian Sikorski
Quoted 113 lines
W dniu 25.02.2012 11:16, Takashi Iwai pisze:
Quoted 106 lines
At Fri, 24 Feb 2012 23:06:26 +0100,
Quoted 95 lines · Julian Sikorski
W dniu 24.02.2012 10:43, Takashi Iwai pisze:
Quoted 93 lines
At Thu, 23 Feb 2012 20:11:44 +0100,
Quoted 90 lines · Julian Sikorski
W dniu 09.12.2011 14:32, Raymond Yau pisze:
Quoted 83 lines
2011/12/4 Julian Sikorski <[email protected]>:
Quoted 8 lines
Hi,
whenever I resume the machine, the Input Source would get changed back from "Internal Mic" to "Mic". This is a bit annoying, because pulseaudio is unaware of that change. As a result, everything looks fine in pavucontrol but no sound gets recorded. A quick look at alsamixer -c0 revealed the problem. My alsa info:
Quoted 5 lines
http://www.alsa-project.org/db/?f=c5776b615a5f3b9ae624e4250fb0c2b69118ce26
This is unrelated to the other problems I have been reporting, since this happens on a mostly-stock Fedora 3.1.2 kernel (the patch I added deals with xhci, not alsa).
The problem seem can be reproduced by using hda-emu,
it isinit_capsrc_for_pin()andalc_auto_init_input_src()write value to cache beforesnd_hda_codec_resume_app()from cacheQuoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]Quoted 1 line
set 28 1
send: NID=0x23, VERB=0x360(set_amp_gain_mute,I:L#0), PARM=0x80
send: NID=0x23, VERB=0x350(set_amp_gain_mute,I:R#0), PARM=0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Internal Mic]pm
** SUSPENDING **
...
** RESUMING **
PM-Notified
...exec_init_verbs
...
init_capsrc_for_pin18
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x0
receive:0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x0
receive:0x0
init capsrc for pin 19
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x0
send: NID=0x23, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x1
receive:0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x0 init capsrc for pin 1a
send: NID=0x23, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x2
receive:0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x0
alc_auto_init_input_src
send: NID=0x23, VERB=0x361(set_amp_gain_mute,I:L#1), PARM=0x80
send: NID=0x23, VERB=0x351(set_amp_gain_mute,I:R#1), PARM=0x80
send: NID=0x23, VERB=0x362(set_amp_gain_mute,I:L#2), PARM=0x80
send: NID=0x23, VERB=0x352(set_amp_gain_mute,I:R#2), PARM=0x80
snd_hda_codec_resume_app
send: NID=0x23, VERB=0x363(set_amp_gain_mute,I:L#3), PARM=0x80
send: NID=0x23, VERB=0x353(set_amp_gain_mute,I:R#3), PARM=0x80
send: NID=0x23, VERB=0x364(set_amp_gain_mute,I:L#4), PARM=0x80
send: NID=0x23, VERB=0x354(set_amp_gain_mute,I:R#4), PARM=0x80
send: NID=0x23, VERB=0x365(set_amp_gain_mute,I:L#5), PARM=0x80
send: NID=0x23, VERB=0x355(set_amp_gain_mute,I:R#5), PARM=0x80
send: NID=0x23, VERB=0x366(set_amp_gain_mute,I:L#6), PARM=0x80
send: NID=0x23, VERB=0x356(set_amp_gain_mute,I:R#6), PARM=0x80
send: NID=0x23, VERB=0x367(set_amp_gain_mute,I:L#7), PARM=0x80
send: NID=0x23, VERB=0x357(set_amp_gain_mute,I:R#7), PARM=0x80
send: NID=0x23, VERB=0x368(set_amp_gain_mute,I:L#8), PARM=0x80
send: NID=0x23, VERB=0x358(set_amp_gain_mute,I:R#8), PARM=0x80
send: NID=0x23, VERB=0x369(set_amp_gain_mute,I:L#9), PARM=0x80
send: NID=0x23, VERB=0x359(set_amp_gain_mute,I:R#9), PARM=0x80
send: NID=0x23, VERB=0x36a(set_amp_gain_mute,I:L#10), PARM=0x80
send: NID=0x23, VERB=0x35a(set_amp_gain_mute,I:R#10), PARM=0x80
...Quoted 3 lines
Quoted 1 line
get 28
28 Input Source:0
ITEM: 0:Mic, 1:Internal Mic, 2:Line, VAL: [Mic]The problem still exists in 3.2.7-1.fc16.x86_64 kernel, is there any chance for a fix?
Quoted 8 lines
Quoted 4 lines
Does the patch below fix?
Takashi
Yes, it seems so. I don't want to get ahead of myself, but two suspend-resume cycles have passed and inputs are at Internal Mic and Mic, as expected.
Quoted 5 lines
Thanks for checking. I committed the fix to git tree, also Cc'ed to stable.
Takashi
I cannot seem to find this patch in the 3.2 stable tree, was it rejected?
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
What is the git commit id of it in Linus's tree?
Hmm, it does not seem to be in Linus' tree yet. It is in for-linus branch of sound tree under commit
068b9394though.Then there is nothing I can do about it at this point in time.
greg k-h
Dear Greg,
it seems the patch has been merged to the Linus' tree:
Regards,
Julian