hda: stac92hd8xxx amp mixers
PATCH 1/1 hda: stac92hd8xxx amp mixers
Added amp nid for stac92hd8xxx families of codecs so the input amp mixer is created.
Signed-off-by Matthew Ranostay <[email protected]>
---
pci/hda/patch_sigmatel.c +6 -0
@@ -331,6 +331,10 @@ static unsigned int stac92hd83xxx_pwr_mapping[4] = { 0x03, 0x0c, 0x10, 0x40, }; +static unsigned int stac92hd83xxx_amp_nids[1 ] = { +0xc , +}; +static hda_nid_t stac92hd71bxx_pwr_nids[3 ] = {0x0a ,0x0d ,0x0f };
@@ -4672,6 +4676,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) spec->dmux_nids = stac92hd83xxx_dmux_nids; spec->adc_nids = stac92hd83xxx_adc_nids; spec->pwr_nids = stac92hd83xxx_pwr_nids; + spec->amp_nids = stac92hd83xxx_amp_nids; spec->pwr_mapping = stac92hd83xxx_pwr_mapping; spec->num_pwrs =ARRAY_SIZE (stac92hd83xxx_pwr_nids); spec->multiout.dac_nids = spec->dac_nids;
@@ -4689,6 +4694,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) spec->num_pins =ARRAY_SIZE (stac92hd83xxx_pin_nids); spec->num_dmuxes =ARRAY_SIZE (stac92hd83xxx_dmux_nids); spec->num_adcs =ARRAY_SIZE (stac92hd83xxx_adc_nids); + spec->num_amps =ARRAY_SIZE (stac92hd83xxx_amp_nids); spec->num_dmics =STAC92HD83XXX_NUM_DMICS ; spec->dinput_mux = &stac92hd83xxx_dmux; spec->pin_nids = stac92hd83xxx_pin_nids;
Takashi Iwai
AppliedAt Tue, 13 Jan 2009 13:30:07 -0500,
Quoted 5 lines · Matthew Ranostay
Added amp nid for stac92hd8xxx families of codecs so the input amp mixer is created.
Signed-off-by Matthew Ranostay <[email protected]>
Applied. Thanks.
Takashi
Quoted 34 lines
---
pci/hda/patch_sigmatel.c +6
-0@@ -331,6 +331,10 @@ static unsigned int stac92hd83xxx_pwr_mapping[4] = { 0x03, 0x0c, 0x10, 0x40, }; +static unsigned int stac92hd83xxx_amp_nids[1 ] = { +0xc , +}; +static hda_nid_t stac92hd71bxx_pwr_nids[3 ] = {0x0a ,0x0d ,0x0f };@@ -4672,6 +4676,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) spec->dmux_nids = stac92hd83xxx_dmux_nids; spec->adc_nids = stac92hd83xxx_adc_nids; spec->pwr_nids = stac92hd83xxx_pwr_nids; + spec->amp_nids = stac92hd83xxx_amp_nids; spec->pwr_mapping = stac92hd83xxx_pwr_mapping; spec->num_pwrs =ARRAY_SIZE (stac92hd83xxx_pwr_nids); spec->multiout.dac_nids = spec->dac_nids;@@ -4689,6 +4694,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) spec->num_pins =ARRAY_SIZE (stac92hd83xxx_pin_nids); spec->num_dmuxes =ARRAY_SIZE (stac92hd83xxx_dmux_nids); spec->num_adcs =ARRAY_SIZE (stac92hd83xxx_adc_nids); + spec->num_amps =ARRAY_SIZE (stac92hd83xxx_amp_nids); spec->num_dmics =STAC92HD83XXX_NUM_DMICS ; spec->dinput_mux = &stac92hd83xxx_dmux; spec->pin_nids = stac92hd83xxx_pin_nids;
At Wed, 14 Jan 2009 08:02:00 +0100,
Quoted 10 lines · I wrote:
At Tue, 13 Jan 2009 13:30:07 -0500,
Quoted 5 lines · Matthew Ranostay
Added amp nid for stac92hd8xxx families of codecs so the input amp mixer is created.
Signed-off-by Matthew Ranostay <[email protected]>Applied. Thanks.
Oops, I found a bug in this simple patch... The NID should be in the type hda_nid_t. Now fixed.
Please do more compile-test before submission at the next time... (same applies to me :)
thanks,
Takashi
Quoted 38 lines
Takashi
Quoted 34 lines
---
pci/hda/patch_sigmatel.c +6
-0@@ -331,6 +331,10 @@ static unsigned int stac92hd83xxx_pwr_mapping[4] = { 0x03, 0x0c, 0x10, 0x40, }; +static unsigned int stac92hd83xxx_amp_nids[1 ] = { +0xc , +}; +static hda_nid_t stac92hd71bxx_pwr_nids[3 ] = {0x0a ,0x0d ,0x0f };@@ -4672,6 +4676,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) spec->dmux_nids = stac92hd83xxx_dmux_nids; spec->adc_nids = stac92hd83xxx_adc_nids; spec->pwr_nids = stac92hd83xxx_pwr_nids; + spec->amp_nids = stac92hd83xxx_amp_nids; spec->pwr_mapping = stac92hd83xxx_pwr_mapping; spec->num_pwrs =ARRAY_SIZE (stac92hd83xxx_pwr_nids); spec->multiout.dac_nids = spec->dac_nids;@@ -4689,6 +4694,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) spec->num_pins =ARRAY_SIZE (stac92hd83xxx_pin_nids); spec->num_dmuxes =ARRAY_SIZE (stac92hd83xxx_dmux_nids); spec->num_adcs =ARRAY_SIZE (stac92hd83xxx_adc_nids); + spec->num_amps =ARRAY_SIZE (stac92hd83xxx_amp_nids); spec->num_dmics =STAC92HD83XXX_NUM_DMICS ; spec->dinput_mux = &stac92hd83xxx_dmux; spec->pin_nids = stac92hd83xxx_pin_nids;