full-duplex - is it possible with rme32?
Hi,
the RME Digi 32 in half-duplex is working so far, but I don't see a solution for a full-duplex support, because this card is working with one buffer for recording and playing.
A driver should write the playing data and read the recording data in one cycle at the same address. There is no way to separate play/rec. It's just working in a synchronized way: first get the rec-data and then overwrite it with play-data, cycle for cycle,...
Can I manage it with alsa? I don't think so, but I'm new here and not so familiar with alsa.
Any Ideas? Is there another module, which works similar?
Or: Sorry, that's not full-alsa-duplex!
thanks,
martin
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply the hardware. You get the recognition. Email Us: [email protected]
At Thu, 2 May 2002 23:44:00 +0200,
Quoted 9 lines · Martin Langer
the RME Digi 32 in half-duplex is working so far, but I don't see a solution for a full-duplex support, because this card is working with one buffer for recording and playing.
A driver should write the playing data and read the recording data in one cycle at the same address. There is no way to separate play/rec. It's just working in a synchronized way: first get the rec-data and then overwrite it with play-data, cycle for cycle,...
does the capture sample always overwrite the sample to be played? i.e. if the hardware sequence is
capture -> playback on the same pointer, then i have no idea how to do full duplex at all. but if the hardware does playback -> capture
then there must be no problem.
Takashi
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply the hardware. You get the recognition. Email Us: [email protected]
Quoted 11 lines · Takashi Iwai
Quoted 9 lines · Martin Langer
the RME Digi 32 in half-duplex is working so far, but I don't see a solution for a full-duplex support, because this card is working with one buffer for recording and playing.
A driver should write the playing data and read the recording data in one cycle at the same address. There is no way to separate play/rec. It's just working in a synchronized way: first get the rec-data and then overwrite it with play-data, cycle for cycle,...
Quoted 8 lines
does the capture sample always overwrite the sample to be played? i.e. if the hardware sequence is
capture -> playback on the same pointer, then i have no idea how to do full duplex at all. but if the hardware does playback -> capturethen there must be no problem.
I'm not sure about my card. In the description I see both cases and I don't know the right one (or the mistake) up to now.
I just can say "playback -> capture" looks more plausible for me at the moment, so I hope having this case.
Definitely I can say this: Using the card ends in
- playing plays the play-data
- capturing captures the play-data in full-duplex-mode
- capturing captures the capture-data in half-duplex-mode
or with some different code (this code produces input/output errors):
- playing silence in full-duplex-mode
- capturing the capture-data in full-duplex-mode
Does another module exist, which works in that "playback -> capture" mode?
martin
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply the hardware. You get the recognition. Email Us: [email protected]
Quoted 21 lines · Martin Langer
Quoted 11 lines · Takashi Iwai
Quoted 9 lines · Martin Langer
the RME Digi 32 in half-duplex is working so far, but I don't see a solution for a full-duplex support, because this card is working with one buffer for recording and playing.
A driver should write the playing data and read the recording data in one cycle at the same address. There is no way to separate play/rec. It's just working in a synchronized way: first get the rec-data and then overwrite it with play-data, cycle for cycle,...
Quoted 8 lines
does the capture sample always overwrite the sample to be played? i.e. if the hardware sequence is
capture -> playback on the same pointer, then i have no idea how to do full duplex at all. but if the hardware does playback -> capturethen there must be no problem.
Quoted 3 lines
I'm not sure about my card. In the description I see both cases and I don't know the right one (or the mistake) up to now.
I asked RME about the real behaviour and the answer was something like this:
The sample for playing is the first one in the buffer. Capturing at the same time will overwrite this sample...
So we have the hardware sequence: capture -> playback and this is like "good-bye full duplex!" for the rme32.
martin
----------------------------------------------------------------------------
Bringing you mounds of caffeinated joy
>>> http://thinkgeek.com/sf <<<