speaker-test: Allow sampling rates up to 768000
PATCH 1/1 speaker-test: Allow sampling rates up to 768000
There are audio devices around that support up to 768kHz playback, allow testing them by increasing the maximum supported sampling rate.
--- speaker-test/speaker-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
speaker-test/speaker-test.c +1 -1
@@ -1034,7 +1034,7 @@ int main(int argc, char *argv[]) {case 'r' : rate =atoi (optarg); rate = rate <4000 ?4000 : rate; - rate = rate >384000 ?384000 : rate; + rate = rate >768000 ?768000 : rate;break ;case 'c' : channels =atoi (optarg);
Signature · 1 line
2.17.0
Hi
Quoted 13 lines · Julian Scheel
There are audio devices around that support up to 768kHz playback, allow testing them by increasing the maximum supported sampling rate.
Signed-off-by Julian Scheel <[email protected]>--- speaker-test/speaker-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)speaker-test/speaker-test.c +0
-0
speaker-test/speaker-test.c int main(int argc, char *argv[]) { · line 1037
Quoted 5 lines
speaker-test/speaker-test.c +1
-1@@ -1034,7 +1034,7 @@ int main(int argc, char *argv[]) {case 'r' : rate =atoi (optarg); rate = rate <4000 ?4000 : rate; - rate = rate >384000 ?384000 : rate; + rate = rate >768000 ?768000 : rate;
Working with dsd and PCM, I'm scared about the ssd or network storage needed ;). BTW in the past I work even on no-conventional audio device, can we just add some flag to force any frequency or
read the max rate supported by audio card?
Michael
Quoted 10 lines
speaker-test/speaker-test.c +0
-1break ;case 'c' : channels =atoi (optarg); --2.17.0
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Signature · 4 lines
| Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com |
Quoted 12 lines · Michael Nazzareno Trimarchi
Hi
Quoted 8 lines · Julian Scheel
There are audio devices around that support up to 768kHz playback, allow testing them by increasing the maximum supported sampling rate.
Signed-off-by Julian Scheel <[email protected]>--- speaker-test/speaker-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 15 lines
speaker-test/speaker-test.c int main(int argc, char *argv[]) { · line 1037
Quoted 10 lines
speaker-test/speaker-test.c +1
-1@@ -1034,7 +1034,7 @@ int main(int argc, char *argv[]) {case 'r' : rate =atoi (optarg); rate = rate <4000 ?4000 : rate; - rate = rate >384000 ?384000 : rate; + rate = rate >768000 ?768000 : rate;Working with dsd and PCM, I'm scared about the ssd or network storage needed ;). BTW in the past I work even on no-conventional audio device, can we just add some flag to force any frequency or
read the max rate supported by audio card?
This is merely a sanity check, and the program accepts only the rate the system supports, in anyway. Note that you can pass a higher rate than the actual card supports; it may be converted by alsa-lib plugin.
Takashi
Takashi Iwai
AppliedQuoted 5 lines · Julian Scheel
There are audio devices around that support up to 768kHz playback, allow testing them by increasing the maximum supported sampling rate.
Signed-off-by Julian Scheel <[email protected]>
Applied, thanks.
Takashi