Skip to contentSkip to conversation

Sound detection

DISCUSSION Andreas Corneliussen 3 participants 6 messages Jan 21, 2007 – Jan 25, 2007

lore
Share & tools
lore
#0 lore raw

Hi
I've just build a mediacenter, and is about to construct an hifi amplifier for it. Therefore i would like to know a way to make alsa detect when nothing is playing at the output, and then run a external command. And detect when something has started playing at the output, and run an external command before any output is generatet. This I would like to do, because I then could make an interface between the amplifier and the computer to make sure that it does not use anymore standbypower than needed.

Any help would be appreciatet.

Regards
Andreas

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

#1 lore raw

At Sun, 21 Jan 2007 13:39:35 +0100,

Quoted 10 lines · Andreas Corneliussen

Hi
I've just build a mediacenter, and is about to construct an hifi amplifier for it. Therefore i would like to know a way to make alsa detect when nothing is playing at the output, and then run a external command. And detect when something has started playing at the output, and run an external command before any output is generatet. This I would like to do, because I then could make an interface between the amplifier and the computer to make sure that it does not use anymore standbypower than needed.

It's an interesting question. Currently, there is no good framework for such a functionality, so you need to build something new.

Maybe the easiest solution is to route the all audio I/O through a sound server and let the sound server do the proper power management. Alternatively, you can modify the dmix and dsnoop plugins so that some power-management codes can be called at the first-open and the last-close.

In both cases, the power-off shouldn't be sent too immediately after the last close. Otherwise you may get often click noises by bad apps that open/close too frequently just for reset, etc.

Takashi

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

#2 lore raw
Quoted 13 lines · Takashi Iwai

At Sun, 21 Jan 2007 13:39:35 +0100,

Quoted 10 lines · Andreas Corneliussen

Hi
I've just build a mediacenter, and is about to construct an hifi amplifier for it. Therefore i would like to know a way to make alsa detect when nothing is playing at the output, and then run a external command. And detect when something has started playing at the output, and run an external command before any output is generatet. This I would like to do, because I then could make an interface between the amplifier and the computer to make sure that it does not use anymore standbypower than needed.

Quoted 3 lines

It's an interesting question. Currently, there is no good framework for such a functionality, so you need to build something new.

Fwiw, the Dynamic Audio Power Management code in ASoC (Alsa for SoC devices) does this very thing. Please feel free to have a look and take code if required.

http://opensource.wolfsonmicro.com/~lg/asoc/

Liam

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

#3 lore raw

At Thu, 25 Jan 2007 16:03:29 +0000,

Quoted 15 lines · Liam Girdwood
Quoted 13 lines · Takashi Iwai

At Sun, 21 Jan 2007 13:39:35 +0100,

Quoted 10 lines · Andreas Corneliussen

Hi
I've just build a mediacenter, and is about to construct an hifi amplifier for it. Therefore i would like to know a way to make alsa detect when nothing is playing at the output, and then run a external command. And detect when something has started playing at the output, and run an external command before any output is generatet. This I would like to do, because I then could make an interface between the amplifier and the computer to make sure that it does not use anymore standbypower than needed.

Quoted 7 lines
Quoted 3 lines

It's an interesting question. Currently, there is no good framework for such a functionality, so you need to build something new.

Fwiw, the Dynamic Audio Power Management code in ASoC (Alsa for SoC devices) does this very thing. Please feel free to have a look and take code if required.

But it doesn't communicate with the user-space, right?
I supposed that the power-management stuff isn't built in the driver itself...

Takashi

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

#4 lore raw
Quoted 21 lines · Takashi Iwai

At Thu, 25 Jan 2007 16:03:29 +0000,

Quoted 19 lines · Liam Girdwood
Quoted 16 lines · Takashi Iwai

At Sun, 21 Jan 2007 13:39:35 +0100,

Quoted 10 lines · Andreas Corneliussen

Hi
I've just build a mediacenter, and is about to construct an hifi amplifier for it. Therefore i would like to know a way to make alsa detect when nothing is playing at the output, and then run a external command. And detect when something has started playing at the output, and run an external command before any output is generatet. This I would like to do, because I then could make an interface between the amplifier and the computer to make sure that it does not use anymore standbypower than needed.

It's an interesting question. Currently, there is no good framework for such a functionality, so you need to build something new.

Quoted 5 lines
Quoted 3 lines

Fwiw, the Dynamic Audio Power Management code in ASoC (Alsa for SoC devices) does this very thing. Please feel free to have a look and take code if required.

But it doesn't communicate with the user-space, right?

Your right, it only powers on board components and can't communicate with user-space atm.

Quoted 3 lines

I supposed that the power-management stuff isn't built in the driver itself...

The codec and machine power maps are in the driver, but it's controlled via the ASoC core (and ultimately via alsa-lib)

Liam

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

#5 lore raw

At Thu, 25 Jan 2007 16:21:43 +0000,

Quoted 32 lines · Liam Girdwood
Quoted 21 lines · Takashi Iwai

At Thu, 25 Jan 2007 16:03:29 +0000,

Quoted 19 lines · Liam Girdwood
Quoted 16 lines · Takashi Iwai

At Sun, 21 Jan 2007 13:39:35 +0100,

Quoted 10 lines · Andreas Corneliussen

Hi
I've just build a mediacenter, and is about to construct an hifi amplifier for it. Therefore i would like to know a way to make alsa detect when nothing is playing at the output, and then run a external command. And detect when something has started playing at the output, and run an external command before any output is generatet. This I would like to do, because I then could make an interface between the amplifier and the computer to make sure that it does not use anymore standbypower than needed.

It's an interesting question. Currently, there is no good framework for such a functionality, so you need to build something new.

Quoted 5 lines
Quoted 3 lines

Fwiw, the Dynamic Audio Power Management code in ASoC (Alsa for SoC devices) does this very thing. Please feel free to have a look and take code if required.

But it doesn't communicate with the user-space, right?

Your right, it only powers on board components and can't communicate with user-space atm.

Quoted 6 lines
Quoted 3 lines

I supposed that the power-management stuff isn't built in the driver itself...

The codec and machine power maps are in the driver, but it's controlled via the ASoC core (and ultimately via alsa-lib)

Yes, I understand the ASoC design :)

Just to clarify:
My comment above refers the fact that the power-mangement outside of the sound-chip/controller might be necessary to be accessed from the outside, preferablly from a user-space tool. I just guessed this case is like so. But, it might be, of course, much easier to do in the driver code depending on the hardware design.

Takashi

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV