Add Tegra234 HDA support
Subsystems (7)
v3 cover Add Tegra234 HDA support
This series add the support for TEGRA234 HDA driver support
- Patch v3 removed conflict on top of linux-next tree
Mohan Kumar (6):
ALSA: hda/tegra: Add Tegra234 hda driver support
ALSA: hda/tegra: Hardcode GCAP ISS value on T234
ALSA: hda/tegra: Update scratch reg. communication
dt-bindings: Add HDA support for Tegra234
dt-bindings: Document Tegra234 HDA support
arm64: tegra: Add hda dts node for Tegra234
.../bindings/sound/nvidia,tegra30-hda.yaml | 3 + .../nvidia/tegra234-p3737-0000+p3701-0000.dts | 6 + arch/arm64/boot/dts/nvidia/tegra234.dtsi | 18 +++ include/dt-bindings/clock/tegra234-clock.h | 4 + include/dt-bindings/memory/tegra234-mc.h | 6 + .../dt-bindings/power/tegra234-powergate.h | 9 ++ include/dt-bindings/reset/tegra234-reset.h | 2 + sound/pci/hda/hda_tegra.c | 33 ++++- sound/pci/hda/patch_hdmi.c | 118 ++++++++++++++---- 9 files changed, 175 insertions(+), 24 deletions(-) create mode 100644 include/dt-bindings/power/tegra234-powergate.h
Signature · 1 line
2.17.1
PATCH v3 1/6 ALSA: hda/tegra: Add Tegra234 hda driver support
Add hda driver support for the Tegra234 chip. The hdacodec on this chip now supports DP MST feature, HDA block contains azalia controller and one hda-codec instance by supporting 4 independent output streams over DP MST mode. There is no input stream support.
--- sound/pci/hda/hda_tegra.c | 21 +++++++++++++-- sound/pci/hda/patch_hdmi.c | 54 +++++++++++++++++++++++++++++++++----- 2 files changed, 67 insertions(+), 8 deletions(-)
sound/pci/hda/hda_tegra.c +19 -2
@@ -70,6 +70,7 @@struct hda_tegra_soc {bool has_hda2codec_2x_reset; +bool has_hda2hdmi; };struct hda_tegra {
@@ -435,15 +436,23 @@ static int hda_tegra_create(struct snd_card *card,static const struct hda_tegra_soc tegra30_data = { .has_hda2codec_2x_reset = true, + .has_hda2hdmi = true, };static const struct hda_tegra_soc tegra194_data = { .has_hda2codec_2x_reset = false, + .has_hda2hdmi = true, +}; + +static const struct hda_tegra_soc tegra234_data = { + .has_hda2codec_2x_reset = true, + .has_hda2hdmi = false, };static const struct of_device_id hda_tegra_match[] = { { .compatible ="nvidia,tegra30-hda" , .data = &tegra30_data }, { .compatible ="nvidia,tegra194-hda" , .data = &tegra194_data }, + { .compatible ="nvidia,tegra234-hda" , .data = &tegra234_data }, {}, };MODULE_DEVICE_TABLE (of, hda_tegra_match);
@@ -473,7 +482,14 @@ static int hda_tegra_probe(struct platform_device *pdev) } hda->resets[hda->nresets++].id ="hda" ; - hda->resets[hda->nresets++].id ="hda2hdmi" ; + +/* +* "hda2hdmi" is not applicable for Tegra234. This is because the +* codec is separate IP and not under display SOR partition now. +*/ +if (hda->soc->has_hda2hdmi) + hda->resets[hda->nresets++].id ="hda2hdmi" ; +/* * "hda2codec_2x" reset is not present on Tegra194. Though DT would * be updated to reflect this, but to have backward compatibility
@@ -488,7 +504,8 @@ static int hda_tegra_probe(struct platform_device *pdev) goto out_free; hda->clocks[hda->nclocks++].id ="hda" ; - hda->clocks[hda->nclocks++].id ="hda2hdmi" ; +if (hda->soc->has_hda2hdmi) + hda->clocks[hda->nclocks++].id ="hda2hdmi" ; hda->clocks[hda->nclocks++].id ="hda2codec_2x" ; err =devm_clk_bulk_get (&pdev->dev, hda->nclocks, hda->clocks);
sound/pci/hda/patch_hdmi.c +48 -6
77 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v3 2/6 ALSA: hda/tegra: Hardcode GCAP ISS value on T234
In reply to Mohan KumarThe GCAP register on Tegra234 implies no Input Streams(ISS) supported, but the HW output stream descriptor programming should start with offset 0x20*4 from base stream descriptor address. This will be a problem while calculating the offset for output stream descriptor which will be considering input stream also. So here output stream starts with offset 0 which is wrong as HW register for output stream offset starts with 4. So hardcode the input stream numbers to 4 to avoid the issue in offset calculation.
--- sound/pci/hda/hda_tegra.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
sound/pci/hda/hda_tegra.c +12 -0
@@ -315,6 +315,18 @@ static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev)* hardcoded value */ chip->capture_streams = (gcap >>8 ) &0x0f ; + +/* The GCAP register on Tegra234 implies no Input Streams(ISS) support, +* but the HW output stream descriptor programming should start with +* offset 0x20*4 from base stream descriptor address. This will be a +* problem while calculating the offset for output stream descriptor +* which will be considering input stream also. So here output stream +* starts with offset 0 which is wrong as HW register for output stream +* offset starts with 4. +*/ +if (of_device_is_compatible (np,"nvidia,tegra234-hda" )) + chip->capture_streams =4 ; + chip->playback_streams = (gcap >>12 ) &0x0f ;if (!chip->playback_streams && !chip->capture_streams) {/* gcap didn't give any info, switching to old method */
Signature · 1 line
2.17.1
PATCH v3 3/6 ALSA: hda/tegra: Update scratch reg. communication
In reply to Mohan KumarTegra234 chip scratch register communication between audio and hdmi driver differs slightly in the way it triggers the interrupt compared to legacy chips. Interrupt is triggered by writing non-zero values to verb 0xF80 instead of 31st bit of scratch register.
DP MST support changed the NID to be used for scratch register read/write from audio function group NID to Converter widget NID.
--- sound/pci/hda/patch_hdmi.c | 64 ++++++++++++++++++++++++++++---------- 1 file changed, 48 insertions(+), 16 deletions(-)
sound/pci/hda/patch_hdmi.c +48 -16
@@ -162,6 +162,8 @@ struct hdmi_spec {bool dyn_pin_out;bool dyn_pcm_assign;bool dyn_pcm_no_legacy; +/* hdmi interrupt trigger control flag for Nvidia codec */ +bool hdmi_intr_trig_ctrl;bool intel_hsw_fixup;/* apply Intel platform-specific fixups */ /* * Non-generic VIA/NVIDIA specific
@@ -3721,8 +3723,11 @@ static int patch_nvhdmi_legacy(struct hda_codec *codec)* +-----------------------------------| * * Note that for the trigger bit to take effect it needs to change value -* (i.e. it needs to be toggled). +* (i.e. it needs to be toggled). The trigger bit is not applicable from +* TEGRA234 chip onwards, as new verb id 0xf80 will be used for interrupt +* trigger to hdmi. */ +#define NVIDIA_SET_HOST_INTR 0xf80#define NVIDIA_GET_SCRATCH0 0xfa6#define NVIDIA_SET_SCRATCH0_BYTE0 0xfa7#define NVIDIA_SET_SCRATCH0_BYTE1 0xfa8
@@ -3741,25 +3746,38 @@ static int patch_nvhdmi_legacy(struct hda_codec *codec)* The format parameter is the HDA audio format (see AC_FMT_*). If set to 0, * the format is invalidated so that the HDMI codec can be disabled. */ -static void tegra_hdmi_set_format (struct hda_codec *codec,unsigned int format) +static void tegra_hdmi_set_format (struct hda_codec *codec, +hda_nid_t cvt_nid, +unsigned int format) {unsigned int value; +unsigned int nid =NVIDIA_AFG_NID ; +struct hdmi_spec *spec = codec->spec; + +/* +* Tegra HDA codec design from TEGRA234 chip onwards support DP MST. +* This resulted in moving scratch registers from audio function +* group to converter widget context. So CVT NID should be used for +* scratch register read/write for DP MST supported Tegra HDA codec. +*/ +if (codec->dp_mst) + nid = cvt_nid;/* bits [31:30] contain the trigger and valid bits */ - value =snd_hda_codec_read (codec,NVIDIA_AFG_NID ,0 , + value =snd_hda_codec_read (codec, nid,0 ,NVIDIA_GET_SCRATCH0 ,0 ); value = (value >>24 ) &0xff ;/* bits [15:0] are used to store the HDA format */ -snd_hda_codec_write (codec,NVIDIA_AFG_NID ,0 , +snd_hda_codec_write (codec, nid,0 ,NVIDIA_SET_SCRATCH0_BYTE0 , (format >>0 ) &0xff ); -snd_hda_codec_write (codec,NVIDIA_AFG_NID ,0 , +snd_hda_codec_write (codec, nid,0 ,NVIDIA_SET_SCRATCH0_BYTE1 , (format >>8 ) &0xff );/* bits [16:24] are unused */ -snd_hda_codec_write (codec,NVIDIA_AFG_NID ,0 , +snd_hda_codec_write (codec, nid,0 ,NVIDIA_SET_SCRATCH0_BYTE2 ,0 );/*
@@ -3771,15 +3789,28 @@ static void tegra_hdmi_set_format(struct hda_codec *codec, unsigned int format)else value |=NVIDIA_SCRATCH_VALID ; -/* -* Whenever the trigger bit is toggled, an interrupt is raised in the -* HDMI codec. The HDMI driver will use that as trigger to update its -* configuration. -*/ - value ^=NVIDIA_SCRATCH_TRIGGER ; +if (spec->hdmi_intr_trig_ctrl) { +/* +* For Tegra HDA Codec design from TEGRA234 onwards, the +* Interrupt to hdmi driver is triggered by writing +* non-zero values to verb 0xF80 instead of 31st bit of +* scratch register. +*/ +snd_hda_codec_write (codec, nid,0 , +NVIDIA_SET_SCRATCH0_BYTE3 , value); +snd_hda_codec_write (codec, nid,0 , +NVIDIA_SET_HOST_INTR ,0x1 ); + }else { +/* +* Whenever the 31st trigger bit is toggled, an interrupt is raised +* in the HDMI codec. The HDMI driver will use that as trigger +* to update its configuration. +*/ + value ^=NVIDIA_SCRATCH_TRIGGER ; -snd_hda_codec_write (codec,NVIDIA_AFG_NID ,0 , -NVIDIA_SET_SCRATCH0_BYTE3 , value); +snd_hda_codec_write (codec, nid,0 , +NVIDIA_SET_SCRATCH0_BYTE3 , value); + } } static int tegra_hdmi_pcm_prepare(struct hda_pcm_stream *hinfo,
@@ -3796,7 +3827,7 @@ static int tegra_hdmi_pcm_prepare(struct hda_pcm_stream *hinfo,return err;/* notify the HDMI codec of the format change */ -tegra_hdmi_set_format (codec, format); +tegra_hdmi_set_format (codec, hinfo->nid, format);return 0 ; }
@@ -3806,7 +3837,7 @@ static int tegra_hdmi_pcm_cleanup(struct hda_pcm_stream *hinfo, struct snd_pcm_substream *substream) {/* invalidate the format in the HDMI codec */ -tegra_hdmi_set_format (codec,0 ); +tegra_hdmi_set_format (codec, hinfo->nid,0 );return generic_hdmi_playback_pcm_cleanup (hinfo, codec, substream); }
@@ -3906,6 +3937,7 @@ static int patch_tegra234_hdmi(struct hda_codec *codec) spec = codec->spec; spec->dyn_pin_out = true; spec->dyn_pcm_assign = true; + spec->hdmi_intr_trig_ctrl = true;return tegra_hdmi_init (codec); }
Signature · 1 line
2.17.1
PATCH v3 4/6 dt-bindings: Add HDA support for Tegra234
In reply to Mohan KumarAdd hda clocks, memory ,power and reset binding entries for Tegra234.
--- include/dt-bindings/clock/tegra234-clock.h | 4 ++++ include/dt-bindings/memory/tegra234-mc.h | 6 ++++++ include/dt-bindings/power/tegra234-powergate.h | 9 +++++++++ include/dt-bindings/reset/tegra234-reset.h | 2 ++ 4 files changed, 21 insertions(+) create mode 100644 include/dt-bindings/power/tegra234-powergate.h
include/dt-bindings/clock/tegra234-clock.h +4 -0
@@ -64,4 +64,8 @@#define TEGRA234_CLK_PLLC4 237U/** @brief 32K input clock provided by PMIC */ #define TEGRA234_CLK_CLK_32K 289U +/** @brief CLK_RST_CONTROLLER_AZA2XBITCLK_OUT_SWITCH_DIVIDER switch divider output (aza_2xbitclk) */ +#define TEGRA234_CLK_AZA_2XBIT 457U +/** @brief aza_2xbitclk / 2 (aza_bitclk) */ +#define TEGRA234_CLK_AZA_BIT 458U#endif
include/dt-bindings/memory/tegra234-mc.h +6 -0
@@ -7,6 +7,8 @@#define TEGRA234_SID_INVALID 0x00#define TEGRA234_SID_PASSTHROUGH 0x7f +/* NISO0 stream IDs */ +#define TEGRA234_SID_HDA 0x03/* NISO1 stream IDs */ #define TEGRA234_SID_SDMMC4 0x02
@@ -16,6 +18,10 @@* memory client IDs */ +/* High-definition audio (HDA) read clients */ +#define TEGRA234_MEMORY_CLIENT_HDAR 0x15 +/* High-definition audio (HDA) write clients */ +#define TEGRA234_MEMORY_CLIENT_HDAW 0x35/* sdmmcd memory read client */ #define TEGRA234_MEMORY_CLIENT_SDMMCRAB 0x63/* sdmmcd memory write client */
include/dt-bindings/power/tegra234-powergate.h new file +9 -0
@@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2022, NVIDIA CORPORATION. All rights reserved. */ + +#ifndef __ABI_MACH_T234_POWERGATE_T234_H_ +#define __ABI_MACH_T234_POWERGATE_T234_H_ + +#define TEGRA234_POWER_DOMAIN_DISP 3U + +#endif
include/dt-bindings/reset/tegra234-reset.h +2 -0
@@ -10,6 +10,8 @@* @brief Identifiers for Resets controllable by firmware * @{ */ +#define TEGRA234_RESET_HDA 20U +#define TEGRA234_RESET_HDACODEC 21U#define TEGRA234_RESET_I2C1 24U#define TEGRA234_RESET_I2C2 29U#define TEGRA234_RESET_I2C3 30U
Signature · 1 line
2.17.1
Re: [PATCH v3 4/6] dt-bindings: Add HDA support for Tegra234
Quoted 11 lines · Mohan Kumar
Add hda clocks, memory ,power and reset binding entries for Tegra234.
Signed-off-by Mohan Kumar <[email protected]>--- include/dt-bindings/clock/tegra234-clock.h | 4 ++++ include/dt-bindings/memory/tegra234-mc.h | 6 ++++++ include/dt-bindings/power/tegra234-powergate.h | 9 +++++++++ include/dt-bindings/reset/tegra234-reset.h | 2 ++ 4 files changed, 21 insertions(+) create mode 100644 include/dt-bindings/power/tegra234-powergate.h
Actually it looks like I may need to pick this up as well to satisfy the dependency from patch 6.
Takashi, any objections if I pick up patches 4 and 6 and you take the remainder through your tree? I don't think there are any dependencies on this patch 4 from patches 1-3 and 5.
Thierry
Re: [PATCH v3 4/6] dt-bindings: Add HDA support for Tegra234
Quoted 14 lines · Thierry Reding
Quoted 11 lines · Mohan Kumar
Add hda clocks, memory ,power and reset binding entries for Tegra234.
Signed-off-by Mohan Kumar <[email protected]>--- include/dt-bindings/clock/tegra234-clock.h | 4 ++++ include/dt-bindings/memory/tegra234-mc.h | 6 ++++++ include/dt-bindings/power/tegra234-powergate.h | 9 +++++++++ include/dt-bindings/reset/tegra234-reset.h | 2 ++ 4 files changed, 21 insertions(+) create mode 100644 include/dt-bindings/power/tegra234-powergate.h
Quoted 6 lines
Actually it looks like I may need to pick this up as well to satisfy the dependency from patch 6.
Takashi, any objections if I pick up patches 4 and 6 and you take the remainder through your tree? I don't think there are any dependencies on this patch 4 from patches 1-3 and 5.
Sure, I'm fine with it.
thanks,
Takashi
Re: [PATCH v3 4/6] dt-bindings: Add HDA support for Tegra234
Quoted 17 lines · Takashi Iwai
Quoted 14 lines · Thierry Reding
Quoted 11 lines · Mohan Kumar
Add hda clocks, memory ,power and reset binding entries for Tegra234.
Signed-off-by Mohan Kumar <[email protected]>--- include/dt-bindings/clock/tegra234-clock.h | 4 ++++ include/dt-bindings/memory/tegra234-mc.h | 6 ++++++ include/dt-bindings/power/tegra234-powergate.h | 9 +++++++++ include/dt-bindings/reset/tegra234-reset.h | 2 ++ 4 files changed, 21 insertions(+) create mode 100644 include/dt-bindings/power/tegra234-powergate.h
Quoted 8 lines
Quoted 6 lines
Actually it looks like I may need to pick this up as well to satisfy the dependency from patch 6.
Takashi, any objections if I pick up patches 4 and 6 and you take the remainder through your tree? I don't think there are any dependencies on this patch 4 from patches 1-3 and 5.
Sure, I'm fine with it.
Now I merged patches 1, 2, 3 and 5 to sound.git tree for-next branch.
thanks,
Takashi
Rob Herring
maintainerRe: [PATCH v3 4/6] dt-bindings: Add HDA support for Tegra234
In reply to Mohan KumarQuoted 55 lines · Mohan Kumar
Add hda clocks, memory ,power and reset binding entries for Tegra234.
Signed-off-by Mohan Kumar <[email protected]>--- include/dt-bindings/clock/tegra234-clock.h | 4 ++++ include/dt-bindings/memory/tegra234-mc.h | 6 ++++++ include/dt-bindings/power/tegra234-powergate.h | 9 +++++++++ include/dt-bindings/reset/tegra234-reset.h | 2 ++ 4 files changed, 21 insertions(+) create mode 100644 include/dt-bindings/power/tegra234-powergate.hinclude/dt-bindings/clock/tegra234-clock.h +4
-0@@ -64,4 +64,8 @@#define TEGRA234_CLK_PLLC4 237U/** @brief 32K input clock provided by PMIC */ #define TEGRA234_CLK_CLK_32K 289U +/** @brief CLK_RST_CONTROLLER_AZA2XBITCLK_OUT_SWITCH_DIVIDER switch divider output (aza_2xbitclk) */ +#define TEGRA234_CLK_AZA_2XBIT 457U +/** @brief aza_2xbitclk / 2 (aza_bitclk) */ +#define TEGRA234_CLK_AZA_BIT 458U#endif include/dt-bindings/memory/tegra234-mc.h +6
-0@@ -7,6 +7,8 @@#define TEGRA234_SID_INVALID 0x00#define TEGRA234_SID_PASSTHROUGH 0x7f +/* NISO0 stream IDs */ +#define TEGRA234_SID_HDA 0x03/* NISO1 stream IDs */ #define TEGRA234_SID_SDMMC4 0x02@@ -16,6 +18,10 @@* memory client IDs */ +/* High-definition audio (HDA) read clients */ +#define TEGRA234_MEMORY_CLIENT_HDAR 0x15 +/* High-definition audio (HDA) write clients */ +#define TEGRA234_MEMORY_CLIENT_HDAW 0x35/* sdmmcd memory read client */ #define TEGRA234_MEMORY_CLIENT_SDMMCRAB 0x63/* sdmmcd memory write client */ include/dt-bindings/power/tegra234-powergate.h new file +0
-0
include/dt-bindings/power/tegra234-powergate.h line 1
Quoted 1 line
include/dt-bindings/power/tegra234-powergate.h new file +1
-0@@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */
Dual license please.
Quoted 25 lines
include/dt-bindings/power/tegra234-powergate.h new file +8
-0+/* Copyright (c) 2022, NVIDIA CORPORATION. All rights reserved. */ + +#ifndef __ABI_MACH_T234_POWERGATE_T234_H_ +#define __ABI_MACH_T234_POWERGATE_T234_H_ + +#define TEGRA234_POWER_DOMAIN_DISP 3U + +#endif include/dt-bindings/reset/tegra234-reset.h +2
-0@@ -10,6 +10,8 @@* @brief Identifiers for Resets controllable by firmware * @{ */ +#define TEGRA234_RESET_HDA 20U +#define TEGRA234_RESET_HDACODEC 21U#define TEGRA234_RESET_I2C1 24U#define TEGRA234_RESET_I2C2 29U#define TEGRA234_RESET_I2C3 30USignature · 1 line
2.17.1
Re: [PATCH v3 4/6] dt-bindings: Add HDA support for Tegra234
Quoted 43 lines · Rob Herring
Quoted 42 lines · Mohan Kumar
Add hda clocks, memory ,power and reset binding entries for Tegra234.
Signed-off-by Mohan Kumar <[email protected]>--- include/dt-bindings/clock/tegra234-clock.h | 4 ++++ include/dt-bindings/memory/tegra234-mc.h | 6 ++++++ include/dt-bindings/power/tegra234-powergate.h | 9 +++++++++ include/dt-bindings/reset/tegra234-reset.h | 2 ++ 4 files changed, 21 insertions(+) create mode 100644 include/dt-bindings/power/tegra234-powergate.hinclude/dt-bindings/clock/tegra234-clock.h +4
-0@@ -64,4 +64,8 @@#define TEGRA234_CLK_PLLC4 237U/** @brief 32K input clock provided by PMIC */ #define TEGRA234_CLK_CLK_32K 289U +/** @brief CLK_RST_CONTROLLER_AZA2XBITCLK_OUT_SWITCH_DIVIDER switch divider output (aza_2xbitclk) */ +#define TEGRA234_CLK_AZA_2XBIT 457U +/** @brief aza_2xbitclk / 2 (aza_bitclk) */ +#define TEGRA234_CLK_AZA_BIT 458U#endif include/dt-bindings/memory/tegra234-mc.h +2
-0@@ -7,6 +7,8 @@#define TEGRA234_SID_INVALID 0x00#define TEGRA234_SID_PASSTHROUGH 0x7f +/* NISO0 stream IDs */ +#define TEGRA234_SID_HDA 0x03/* NISO1 stream IDs */ #define TEGRA234_SID_SDMMC4 0x02@@ -16,6 +18,10 @@* memory client IDs */
Quoted 16 lines
Quoted 13 lines
include/dt-bindings/memory/tegra234-mc.h +4
-0+/* High-definition audio (HDA) read clients */ +#define TEGRA234_MEMORY_CLIENT_HDAR 0x15 +/* High-definition audio (HDA) write clients */ +#define TEGRA234_MEMORY_CLIENT_HDAW 0x35/* sdmmcd memory read client */ #define TEGRA234_MEMORY_CLIENT_SDMMCRAB 0x63/* sdmmcd memory write client */ include/dt-bindings/power/tegra234-powergate.h new file +0
-0include/dt-bindings/power/tegra234-powergate.h line 1
Quoted 1 line
include/dt-bindings/power/tegra234-powergate.h new file +1
-0@@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ Dual license please.
We've got a bunch of similar files in this directory that are not dual licensed. These files originally are part of the BPMP firmware tree, so I'll check with the owners if relicensing would be possible. If so, I think we should be able to relicense all of those header files.
Thierry
PATCH v3 5/6 dt-bindings: Document Tegra234 HDA support
In reply to Mohan KumarUpdate binding document for HDA support on Tegra234 chip.
Tegra234 has max of 2 clocks and 2 resets which requires to add minItems and maxItems for clocks and resets as Tegra chips can now have minimum of 2 and maximum of 3 clocks and reset support.
--- .../devicetree/bindings/sound/nvidia,tegra30-hda.yaml | 3 +++ 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml +3 -0
@@ -23,6 +23,7 @@ properties: - const: nvidia,tegra30-hda - items: - enum: + - nvidia,tegra234-hda - nvidia,tegra194-hda - nvidia,tegra186-hda - nvidia,tegra210-hda
@@ -41,9 +42,11 @@ properties: maxItems: 1 clocks: + minItems: 2 maxItems: 3 clock-names: + minItems: 2 items: - const: hda - const: hda2hdmi
Signature · 1 line
2.17.1
Re: [PATCH v3 5/6] dt-bindings: Document Tegra234 HDA support
Quoted 16 lines · Mohan Kumar
Update binding document for HDA support on Tegra234 chip.
Tegra234 has max of 2 clocks and 2 resets which requires to add minItems and maxItems for clocks and resets as Tegra chips can now have minimum of 2 and maximum of 3 clocks and reset support.
Signed-off-by Mohan Kumar <[email protected]>--- .../devicetree/bindings/sound/nvidia,tegra30-hda.yaml | 3 +++ 1 file changed, 3 insertions(+)Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml +0
-0
Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml properties: · line 26
Quoted 4 lines
Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml +1
-0@@ -23,6 +23,7 @@ properties: - const: nvidia,tegra30-hda - items: - enum: + - nvidia,tegra234-hda
Why putting it in non-alphabetical order? Although someone put nvidia,tegra124-hda already at the end of list... having things ordered is helpful to avoid conflicts and makes code easier to read.
Best regards,
Krzysztof
RE: [PATCH v3 5/6] dt-bindings: Document Tegra234 HDA support
Hi Krzysztof Kozlowski,
The current order is intentional to reflect the new->old chip, the top entry is newer chip. If needed we can add comment to reflect this info.
-----Original Message-----
From: Krzysztof Kozlowski <[email protected]>
Sent: Wednesday, February 16, 2022 4:00 PM
To: Mohan Kumar D <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Jonathan Hunter <[email protected]>; Sameer Pujar <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH v3 5/6] dt-bindings: Document Tegra234 HDA support
External email: Use caution opening links or attachments
Quoted 18 lines · Mohan Kumar
Update binding document for HDA support on Tegra234 chip.
Tegra234 has max of 2 clocks and 2 resets which requires to add minItems and maxItems for clocks and resets as Tegra chips can now have minimum of 2 and maximum of 3 clocks and reset support.
Signed-off-by Mohan Kumar <[email protected]>--- .../devicetree/bindings/sound/nvidia,tegra30-hda.yaml | 3 +++ 1 file changed, 3 insertions(+)(quoted diff) +0
-0
a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yamlb/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yamlindex2c913aa44fee..12c31b4b99e1100644
Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml properties: · line 26
Quoted 4 lines
Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml +1
-0@@ -23,6 +23,7 @@ properties: - const: nvidia,tegra30-hda - items: - enum: + - nvidia,tegra234-hda
Why putting it in non-alphabetical order? Although someone put nvidia,tegra124-hda already at the end of list... having things ordered is helpful to avoid conflicts and makes code easier to read.
Best regards,
Krzysztof
Re: [PATCH v3 5/6] dt-bindings: Document Tegra234 HDA support
Quoted 4 lines · Mohan Kumar D
Hi Krzysztof Kozlowski,
The current order is intentional to reflect thenew->oldchip, the top entry is newer chip. If needed we can add comment to reflect this info.
Hm, okay, such ordering sounds good as well. :)
Thanks!
Best regards,
Krzysztof
PATCH v3 6/6 arm64: tegra: Add hda dts node for Tegra234
In reply to Mohan KumarAdd HDA dts node for Tegra234 chip and for AGX orin platform.
--- .../nvidia/tegra234-p3737-0000+p3701-0000.dts | 6 ++++++ arch/arm64/boot/dts/nvidia/tegra234.dtsi | 18 ++++++++++++++++++ 2 files changed, 24 insertions(+)
arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +6 -0
@@ -21,4 +21,10 @@ serial { status = "okay"; }; + + bus@0 { + hda@3510000 { + nvidia,model = "NVIDIA Jetson AGX Orin HDA"; + }; + }; };
arch/arm64/boot/dts/nvidia/tegra234.dtsi +18 -0
@@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> #include <dt-bindings/memory/tegra234-mc.h> +#include <dt-bindings/power/tegra234-powergate.h> #include <dt-bindings/reset/tegra234-reset.h> / {
@@ -394,6 +395,23 @@ #interrupt-cells = <3>; interrupt-controller; }; + + hda@3510000 { + compatible = "nvidia,tegra234-hda", "nvidia,tegra30-hda"; + reg = <0x3510000 0x10000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA234_CLK_AZA_BIT>, + <&bpmp TEGRA234_CLK_AZA_2XBIT>; + clock-names = "hda", "hda2codec_2x"; + resets = <&bpmp TEGRA234_RESET_HDA>, + <&bpmp TEGRA234_RESET_HDACODEC>; + reset-names = "hda", "hda2codec_2x"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_DISP>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_HDAR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_HDAW &emc>; + interconnect-names = "dma-mem", "write"; + status = "disabled"; + }; }; sram@40000000 {
Signature · 1 line
2.17.1