drm/i915: intel_audio clear eld buf when disconnecting monitor
Subsystems (3)
PATCH 1/1 drm/i915: intel_audio clear eld buf when disconnecting monitor
From: Libin Yang <[email protected]>
When disconnecting monitor, dev_priv->dig_port_map[port] will be set NULL, which causes eld will not be updated in i915_audio_component_get_eld().
This patch clears the eld buf when dev_priv->dig_port_map[port] is NULL.
--- drivers/gpu/drm/i915/intel_audio.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/gpu/drm/i915/intel_audio.c +7 -0
@@ -732,6 +732,13 @@ static int i915_audio_component_get_eld(struct device *dev, int port, ret =drm_eld_size (eld);memcpy (buf, eld,min (max_bytes, ret)); } + }else { +/* dev_priv->dig_port_map[port] will be set NULL in +* intel_audio_codec_disable when disconnecting monitor. +* We need clear the eld buf. +*/ +memset (buf,0 , max_bytes); + ret =0 ; }mutex_unlock (&dev_priv->av_mutex);
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 11 lines · On Mon, 21 Mar 2016 06:03:29 +0100, [email protected] wrote:
From: Libin Yang <[email protected]>
When disconnecting monitor, dev_priv->dig_port_map[port] will be set NULL, which causes eld will not be updated in
i915_audio_component_get_eld().This patch clears the eld buf when dev_priv->dig_port_map[port] is NULL.
Signed-off-by Libin Yang <[email protected]>
While this isn't certainly bad, I don't think it's mandatory. The function returns zero, i.e. no data is copied. So the caller shouldn't expect that the buffer is cleared in this case.
Actually, if we do zero-clear, a safer fix would be to do it at the beginning. The similar "leak" can be seen, as we do memcpy() only for drm_eld_size() bytes at max.
thanks,
Takashi
Quoted 25 lines
--- drivers/gpu/drm/i915/intel_audio.c | 7 +++++++ 1 file changed, 7 insertions(+)drivers/gpu/drm/i915/intel_audio.c +7
-0@@ -732,6 +732,13 @@ static int i915_audio_component_get_eld(struct device *dev, int port, ret =drm_eld_size (eld);memcpy (buf, eld,min (max_bytes, ret)); } + }else { +/* dev_priv->dig_port_map[port] will be set NULL in +* intel_audio_codec_disable when disconnecting monitor. +* We need clear the eld buf. +*/ +memset (buf,0 , max_bytes); + ret =0 ; }mutex_unlock (&dev_priv->av_mutex);Signature · 1 line
1.9.1
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 20 lines
-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Monday, March 21, 2016 6:45 PM
To: [email protected]
Cc: [email protected]; [email protected]; [email protected]; [email protected]; Vetter, Daniel; [email protected]; Yang, Libin
Subject: Re: [PATCH] drm/i915:intel_audioclear eld buf when disconnecting monitorQuoted 7 lines · On Mon, 21 Mar 2016 06:03:29 +0100, [email protected] wrote:
From: Libin Yang <[email protected]>
When disconnecting monitor, dev_priv->dig_port_map[port] will be set NULL, which causes eld will not be updated in
i915_audio_component_get_eld().
Quoted 8 lines
Quoted 4 lines
This patch clears the eld buf when dev_priv->dig_port_map[port] is NULL.
Signed-off-by Libin Yang <[email protected]>While this isn't certainly bad, I don't think it's mandatory. The function returns zero, i.e. no data is copied. So the caller shouldn't expect that the buffer is cleared in this case.
Without the patch, we find when unplug the monitor, the eld info will not be updated. The means the eld info in the procfs still remains the old info after the monitor is disconnected.
Quoted 4 lines
Actually, if we do zero-clear, a safer fix would be to do it at the beginning. The similar "leak" can be seen, as we do
memcpy()only fordrm_eld_size()bytes at max.
OK. I will clear at the beginning.
Quoted 30 lines
thanks,
Takashi
Review
Quoted 5 lines
--- drivers/gpu/drm/i915/intel_audio.c | 7 +++++++ 1 file changed, 7 insertions(+)(quoted diff) +0
-0
b/drivers/gpu/drm/i915/intel_audio.cdrivers/gpu/drm/i915/intel_audio.c static int
Quoted 4 lines
index fdc8b2a..9d3879e 100644
drivers/gpu/drm/i915/intel_audio.c +0
-0@@ -732,6 +732,13 @@ static inti915_audio_component_get_eld(struct device *dev, int port,
drivers/gpu/drm/i915/intel_audio.c static int i915_audio_component_get_eld(struct device *dev, int port,
Quoted 6 lines
drivers/gpu/drm/i915/intel_audio.c +3
-0ret =drm_eld_size (eld);memcpy (buf, eld,min (max_bytes, ret)); } + }else { +/* dev_priv->dig_port_map[port] will be set NULL in +* intel_audio_codec_disable when disconnecting monitor.
Quoted 6 lines
drivers/gpu/drm/i915/intel_audio.c +4
-0+* We need clear the eld buf. +*/ +memset (buf,0 , max_bytes); + ret =0 ; }
Quoted 4 lines
Quoted 4 lines
drivers/gpu/drm/i915/intel_audio.c +0
-1mutex_unlock (&dev_priv->av_mutex); --1.9.1
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 26 lines · Libin
Quoted 26 lines
-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Monday, March 21, 2016 6:45 PM
To: [email protected]
Cc: [email protected]; [email protected]; [email protected]; [email protected]; Vetter, Daniel; [email protected]; Yang, Libin
Subject: Re: [PATCH] drm/i915:intel_audioclear eld buf when disconnecting monitorQuoted 11 lines · On Mon, 21 Mar 2016 06:03:29 +0100, [email protected] wrote:
From: Libin Yang <[email protected]>
When disconnecting monitor, dev_priv->dig_port_map[port] will be set NULL, which causes eld will not be updated in
i915_audio_component_get_eld().This patch clears the eld buf when dev_priv->dig_port_map[port] is NULL.
Signed-off-by Libin Yang <[email protected]>
Quoted 7 lines
Quoted 3 lines
While this isn't certainly bad, I don't think it's mandatory. The function returns zero, i.e. no data is copied. So the caller shouldn't expect that the buffer is cleared in this case.
Without the patch, we find when unplug the monitor, the eld info will not be updated. The means the eld info in the procfs still remains the old info after the monitor is disconnected.
Well, it's not about zero-clear but rather because the function returns an error (-EINVAL), and the caller takes it too seriously. Upon receiving an error code, the HDA driver doesn't read ELD at all, so it won't help even if you do zero-clear there.
The alternative fix patch is below.
Takashi
-- 8< --
From: Takashi Iwai <[email protected]>
Subject: [PATCH] drm/i915: Don't handle NULL encoder as an error in get_eld
notifier
Since we fixed the dig_port_map[] assignment rather in a dynamic manner by the commit [2f791908a70e: drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW], the NULL encoder is no longer an error but it just indicates that the unconnected state. However, in the caller (HD-audio) side, it's taken as a serious error, and it leads to the missing update of ELD after unplugging.
As a fix, this patch changes get_eld notifier to return zero and initialize the enabled argument properly as false when no encoder is mapped for indicating the unconnected state.
--- drivers/gpu/drm/i915/intel_audio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_audio.c +2 -2
@@ -717,13 +717,13 @@ static int i915_audio_component_get_eld(struct device *dev, int port,struct intel_encoder *intel_encoder;struct intel_digital_port *intel_dig_port;const u8 *eld; -int ret = -EINVAL ; +int ret =0 ; + *enabled = false;mutex_lock (&dev_priv->av_mutex); intel_encoder = dev_priv->dig_port_map[port];/* intel_encoder might be NULL for DP MST */ if (intel_encoder) { - ret =0 ; intel_dig_port =enc_to_dig_port (&intel_encoder->base); *enabled = intel_dig_port->audio_connector !=NULL ;if (*enabled) {
Signature · 7 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 37 lines · Takashi Iwai
Quoted 26 lines · Libin
Quoted 26 lines
-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Monday, March 21, 2016 6:45 PM
To: [email protected]
Cc: [email protected]; [email protected]; [email protected]; [email protected]; Vetter, Daniel; [email protected]; Yang, Libin
Subject: Re: [PATCH] drm/i915:intel_audioclear eld buf when disconnecting monitorQuoted 11 lines · On Mon, 21 Mar 2016 06:03:29 +0100, [email protected] wrote:
From: Libin Yang <[email protected]>
When disconnecting monitor, dev_priv->dig_port_map[port] will be set NULL, which causes eld will not be updated in
i915_audio_component_get_eld().This patch clears the eld buf when dev_priv->dig_port_map[port] is NULL.
Signed-off-by Libin Yang <[email protected]>Quoted 7 lines
Quoted 3 lines
While this isn't certainly bad, I don't think it's mandatory. The function returns zero, i.e. no data is copied. So the caller shouldn't expect that the buffer is cleared in this case.
Without the patch, we find when unplug the monitor, the eld info will not be updated. The means the eld info in the procfs still remains the old info after the monitor is disconnected.
Quoted 6 lines
Well, it's not about zero-clear but rather because the function returns an error (
-EINVAL), and the caller takes it too seriously. Upon receiving an error code, the HDA driver doesn't read ELD at all, so it won't help even if you do zero-clear there.The alternative fix patch is below.
... or we can fix it in HDA side like below, too.
Both patches don't conflict.
Takashi
-- 8< --
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Fix missing ELD update at unplugging
i915 get_eld ops may return an error when no encoder is connected, and currently we regard the error as fatal and skip the whole ELD handling. This ended up with the missing ELD update at unplugging.
This patch fixes the issue by treating the error as the unplugged state, instead of skipping the rest.
--- sound/pci/hda/patch_hdmi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
sound/pci/hda/patch_hdmi.c +1 -2
@@ -1485,11 +1485,10 @@ static void sync_eld_via_acomp(struct hda_codec *codec,int size;mutex_lock (&per_pin->lock); + *eld->monitor_present = false; size =snd_hdac_acomp_get_eld (&codec->core, per_pin->pin_nid, &eld->monitor_present, eld->eld_buffer,ELD_MAX_SIZE ); -if (size <0 ) - goto unlock;if (size >0 ) { size =min (size,ELD_MAX_SIZE ); if (snd_hdmi_parse_eld(codec, &eld->info,
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 40 lines · Takashi Iwai
Quoted 37 lines · Takashi Iwai
Quoted 33 lines · Libin
Quoted 21 lines
-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Monday, March 21, 2016 6:45 PM
To: [email protected]
Cc: [email protected]; [email protected]; [email protected]; [email protected]; Vetter, Daniel; [email protected]; Yang, Libin
Subject: Re: [PATCH] drm/i915:intel_audioclear eld buf when disconnecting monitorQuoted 7 lines · On Mon, 21 Mar 2016 06:03:29 +0100, [email protected] wrote:
From: Libin Yang <[email protected]>
When disconnecting monitor, dev_priv->dig_port_map[port] will be set NULL, which causes eld will not be updated in
i915_audio_component_get_eld().Quoted 8 lines
Quoted 4 lines
This patch clears the eld buf when dev_priv->dig_port_map[port] is NULL.
Signed-off-by Libin Yang <[email protected]>While this isn't certainly bad, I don't think it's mandatory. The function returns zero, i.e. no data is copied. So the caller shouldn't expect that the buffer is cleared in this case.
Without the patch, we find when unplug the monitor, the eld info will not be updated. The means the eld info in the procfs still remains the old info after the monitor is disconnected.
Quoted 8 lines
Quoted 6 lines
Well, it's not about zero-clear but rather because the function returns an error (
-EINVAL), and the caller takes it too seriously. Upon receiving an error code, the HDA driver doesn't read ELD at all, so it won't help even if you do zero-clear there.The alternative fix patch is below.
... or we can fix it in HDA side like below, too.
This patch won't be applied cleanly on the upstream tree as I wrote it on the my working tree, sorry. Below is the revised one that is applicable to upstream tree.
Takashi
-- 8< --
From: Takashi Iwai <[email protected]>
Subject: [PATCH v2] ALSA: hda - Fix missing ELD update at unplugging
i915 get_eld ops may return an error when no encoder is connected, and currently we regard the error as fatal and skip the whole ELD handling. This ended up with the missing ELD update at unplugging.
This patch fixes the issue by treating the error as the unplugged state, instead of skipping the rest.
--- sound/pci/hda/patch_hdmi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
sound/pci/hda/patch_hdmi.c +1 -2
@@ -1484,11 +1484,10 @@ static void sync_eld_via_acomp(struct hda_codec *codec,int size;mutex_lock (&per_pin->lock); + *eld->monitor_present = false; size =snd_hdac_acomp_get_eld (&codec->bus->core, per_pin->pin_nid, &eld->monitor_present, eld->eld_buffer,ELD_MAX_SIZE ); -if (size <0 ) - goto unlock;if (size >0 ) { size =min (size,ELD_MAX_SIZE ); if (snd_hdmi_parse_eld(codec, &eld->info,
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 48 lines · Takashi Iwai
Quoted 45 lines · Takashi Iwai
Quoted 42 lines · Takashi Iwai
Quoted 26 lines · Libin
Quoted 26 lines
-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Monday, March 21, 2016 6:45 PM
To: [email protected]
Cc: [email protected]; [email protected]; [email protected]; [email protected]; Vetter, Daniel; [email protected]; Yang, Libin
Subject: Re: [PATCH] drm/i915:intel_audioclear eld buf when disconnecting monitorQuoted 11 lines · On Mon, 21 Mar 2016 06:03:29 +0100, [email protected] wrote:
From: Libin Yang <[email protected]>
When disconnecting monitor, dev_priv->dig_port_map[port] will be set NULL, which causes eld will not be updated in
i915_audio_component_get_eld().This patch clears the eld buf when dev_priv->dig_port_map[port] is NULL.
Signed-off-by Libin Yang <[email protected]>Quoted 7 lines
Quoted 3 lines
While this isn't certainly bad, I don't think it's mandatory. The function returns zero, i.e. no data is copied. So the caller shouldn't expect that the buffer is cleared in this case.
Without the patch, we find when unplug the monitor, the eld info will not be updated. The means the eld info in the procfs still remains the old info after the monitor is disconnected.
Well, it's not about zero-clear but rather because the function returns an error (
-EINVAL), and the caller takes it too seriously. Upon receiving an error code, the HDA driver doesn't read ELD at all, so it won't help even if you do zero-clear there.
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
The alternative fix patch is below.
... or we can fix it in HDA side like below, too.
This patch won't be applied cleanly on the upstream tree as I wrote it on the my working tree, sorry. Below is the revised one that is applicable to upstream tree.
Gah, a typo was included in this patch, too. Sorry, the correct one is attached below.
Takashi -- obviously needs a coffee break
-- 8< --
From: Takashi Iwai <[email protected]>
Subject: [PATCH v3] ALSA: hda - Fix missing ELD update at unplugging
i915 get_eld ops may return an error when no encoder is connected, and currently we regard the error as fatal and skip the whole ELD handling. This ended up with the missing ELD update at unplugging.
This patch fixes the issue by treating the error as the unplugged state, instead of skipping the rest.
--- sound/pci/hda/patch_hdmi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
sound/pci/hda/patch_hdmi.c +1 -2
@@ -1484,11 +1484,10 @@ static void sync_eld_via_acomp(struct hda_codec *codec,int size;mutex_lock (&per_pin->lock); + eld->monitor_present = false; size =snd_hdac_acomp_get_eld (&codec->bus->core, per_pin->pin_nid, &eld->monitor_present, eld->eld_buffer,ELD_MAX_SIZE ); -if (size <0 ) - goto unlock;if (size >0 ) { size =min (size,ELD_MAX_SIZE ); if (snd_hdmi_parse_eld(codec, &eld->info,
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi Takashi,
Quoted 65 lines
-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Monday, March 21, 2016 11:30 PM
To: Yang, Libin
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Vetter, Daniel
Subject: Re: [PATCH] drm/i915:intel_audioclear eld buf when disconnecting monitorQuoted 11 lines · Takashi Iwai
Quoted 8 lines · Takashi Iwai
Quoted 5 lines · Takashi Iwai
Quoted 2 lines · Libin
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Monday, March 21, 2016 6:45 PM
To: [email protected]
Cc: [email protected]; [email protected]; [email protected]; [email protected]; Vetter,Daniel;
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[email protected]; Yang, Libin
Subject: Re: [PATCH] drm/i915:intel_audioclear eld buf when disconnecting monitorQuoted 1 line · On Mon, 21 Mar 2016 06:03:29 +0100, [email protected] wrote:
Quoted 18 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
From: Libin Yang <[email protected]>
When disconnecting monitor, dev_priv->dig_port_map[port] will be set NULL, which causes eld will not be updated in
i915_audio_component_get_eld().This patch clears the eld buf when dev_priv-
dig_port_map[port]
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 7 lines
Quoted 3 lines
is NULL.
Signed-off-by Libin Yang <[email protected]>While this isn't certainly bad, I don't think it's mandatory. The function returns zero, i.e. no data is copied. So the caller shouldn't expect that the buffer is cleared in this case.
Without the patch, we find when unplug the monitor, the eld info will not be updated. The means the eld info in the procfs still
remains
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines
Quoted 1 line
the old info after the monitor is disconnected.
Well, it's not about zero-clear but rather because the function returns an error (
-EINVAL), and the caller takes it too seriously. Upon receiving an error code, the HDA driver doesn't read ELD at all, so it won't help even if you do zero-clear there.The alternative fix patch is below.
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
... or we can fix it in HDA side like below, too.
This patch won't be applied cleanly on the upstream tree as I wrote it on the my working tree, sorry. Below is the revised one that is applicable to upstream tree.
Gah, a typo was included in this patch, too. Sorry, the correct one is attached below.
Yes. The patch seems more reasonable than mine.
Do we still need the patch to set i915_audio_component_get_eld() return value to 0? It seems -EINVAL makes sense.
Regards,
Libin
Quoted 43 lines
Takashi -- obviously needs a coffee break
-- 8< --
From: Takashi Iwai <[email protected]>
Subject: [PATCH v3] ALSA: hda - Fix missing ELD update at unpluggingi915
get_eldops may return an error when no encoder is connected, and currently we regard the error as fatal and skip the whole ELD handling. This ended up with the missing ELD update at unplugging.This patch fixes the issue by treating the error as the unplugged state, instead of skipping the rest.
Reported-by Libin Yang <[email protected]>Cc <[email protected]> # v4.5Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/patch_hdmi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)sound/pci/hda/patch_hdmi.c +1
-2@@ -1484,11 +1484,10 @@ static void sync_eld_via_acomp(structhda_codec *codec, int size;mutex_lock (&per_pin->lock); + eld->monitor_present = false; size =snd_hdac_acomp_get_eld (&codec->bus->core, per_pin- >pin_nid, &eld->monitor_present, eld- >eld_buffer,ELD_MAX_SIZE ); -if (size <0 ) - goto unlock;sound/pci/hda/patch_hdmi.c +0
-1if (size >0 ) { size =min (size,ELD_MAX_SIZE ); if (snd_hdmi_parse_eld(codec, &eld->info, --
Quoted 1 line
2.7.4
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 74 lines · Libin
Hi Takashi,
Quoted 71 lines
-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Monday, March 21, 2016 11:30 PM
To: Yang, Libin
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Vetter, Daniel
Subject: Re: [PATCH] drm/i915:intel_audioclear eld buf when disconnecting monitorQuoted 11 lines · Takashi Iwai
Quoted 8 lines · Takashi Iwai
Quoted 5 lines · Takashi Iwai
Quoted 2 lines · Libin
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Monday, March 21, 2016 6:45 PM
To: [email protected]
Cc: [email protected]; [email protected]; [email protected]; [email protected]; Vetter,Daniel;
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[email protected]; Yang, Libin
Subject: Re: [PATCH] drm/i915:intel_audioclear eld buf when disconnecting monitorQuoted 1 line · On Mon, 21 Mar 2016 06:03:29 +0100, [email protected] wrote:
Quoted 18 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
From: Libin Yang <[email protected]>
When disconnecting monitor, dev_priv->dig_port_map[port] will be set NULL, which causes eld will not be updated in
i915_audio_component_get_eld().This patch clears the eld buf when dev_priv-
dig_port_map[port]
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 7 lines
Quoted 3 lines
is NULL.
Signed-off-by Libin Yang <[email protected]>While this isn't certainly bad, I don't think it's mandatory. The function returns zero, i.e. no data is copied. So the caller shouldn't expect that the buffer is cleared in this case.
Without the patch, we find when unplug the monitor, the eld info will not be updated. The means the eld info in the procfs still
remains
Quoted 14 lines
Quoted 10 lines
Quoted 8 lines
Quoted 1 line
the old info after the monitor is disconnected.
Well, it's not about zero-clear but rather because the function returns an error (
-EINVAL), and the caller takes it too seriously. Upon receiving an error code, the HDA driver doesn't read ELD at all, so it won't help even if you do zero-clear there.The alternative fix patch is below.
... or we can fix it in HDA side like below, too.
This patch won't be applied cleanly on the upstream tree as I wrote it on the my working tree, sorry. Below is the revised one that is applicable to upstream tree.
Quoted 7 lines
Quoted 2 lines
Gah, a typo was included in this patch, too. Sorry, the correct one is attached below.
Yes. The patch seems more reasonable than mine.
Do we still need the patch to set
i915_audio_component_get_eld()return value to 0? It seems-EINVALmakes sense.
Yes, we can drop i915 change. I queued my fix for HD-audio side for the next pull request.
thanks,
Takashi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 79 lines · Takashi Iwai
Quoted 77 lines · Libin
Hi Takashi,
Quoted 73 lines
-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Monday, March 21, 2016 11:30 PM
To: Yang, Libin
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Vetter, Daniel
Subject: Re: [PATCH] drm/i915:intel_audioclear eld buf when disconnecting monitorQuoted 11 lines · Takashi Iwai
Quoted 8 lines · Takashi Iwai
Quoted 5 lines · Takashi Iwai
Quoted 2 lines · Libin
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Monday, March 21, 2016 6:45 PM
To: [email protected]
Cc: [email protected]; [email protected]; [email protected]; [email protected]; Vetter,Daniel;
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[email protected]; Yang, Libin
Subject: Re: [PATCH] drm/i915:intel_audioclear eld buf when disconnecting monitorQuoted 1 line · On Mon, 21 Mar 2016 06:03:29 +0100, [email protected] wrote:
Quoted 18 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
From: Libin Yang <[email protected]>
When disconnecting monitor, dev_priv->dig_port_map[port] will be set NULL, which causes eld will not be updated in
i915_audio_component_get_eld().This patch clears the eld buf when dev_priv-
dig_port_map[port]
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 7 lines
Quoted 3 lines
is NULL.
Signed-off-by Libin Yang <[email protected]>While this isn't certainly bad, I don't think it's mandatory. The function returns zero, i.e. no data is copied. So the caller shouldn't expect that the buffer is cleared in this case.
Without the patch, we find when unplug the monitor, the eld info will not be updated. The means the eld info in the procfs still
remains
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 1 line
the old info after the monitor is disconnected.
Well, it's not about zero-clear but rather because the function returns an error (
-EINVAL), and the caller takes it too seriously. Upon receiving an error code, the HDA driver doesn't read ELD at all, so it won't help even if you do zero-clear there.Quoted 7 lines
Quoted 3 lines
Quoted 1 line
The alternative fix patch is below.
... or we can fix it in HDA side like below, too.
This patch won't be applied cleanly on the upstream tree as I wrote it on the my working tree, sorry. Below is the revised one that is applicable to upstream tree.
Gah, a typo was included in this patch, too. Sorry, the correct one is attached below.
Quoted 7 lines
Quoted 4 lines
Yes. The patch seems more reasonable than mine.
Do we still need the patch to set
i915_audio_component_get_eld()return value to 0? It seems-EINVALmakes sense.Yes, we can drop i915 change. I queued my fix for HD-audio side for the next pull request.
Awesome, thx everyone for tracking this down.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
kbuild test robot
build botRe: [PATCH v2] ALSA: hda - Fix missing ELD update at unplugging
In reply to Takashi Iwaireproduce:
Hi Takashi,
[auto build test ERROR on v4.5-rc7]
[also build test ERROR on next-20160321]
[cannot apply to sound/for-next]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
url: https://github.com/0day-ci/linux/commits/Takashi-Iwai/ALSA-hda-Fix-missing-ELD-update-at-unplugging/20160322-045538 config: x86_64-randconfig-s5-03220710 (attached as .config) reproduce: # save the attached .config to linux build tree make ARCH=x86_64
All errors (new ones prefixed by >>):
sound/pci/hda/patch_hdmi.c: In function 'sync_eld_via_acomp':
>> sound/pci/hda/patch_hdmi.c:1668:2: error: invalid type argument of unary '*' (have 'int')
*eld->monitor_present = false;
^
sound/pci/hda/patch_hdmi.c:1690:2: warning: label 'unlock' defined but not used [-Wunused-label]
unlock:
^vim +1668 sound/pci/hda/patch_hdmi.c
1662 {
1663 struct hdmi_spec *spec = codec->spec;
1664 struct hdmi_eld *eld = &spec->temp_eld;
1665 int size;
1666
1667 mutex_lock(&per_pin->lock);
> 1668 *eld->monitor_present = false;
1669 size = snd_hdac_acomp_get_eld(&codec->bus->core, per_pin->pin_nid,
1670 &eld->monitor_present, eld->eld_buffer,
1671 ELD_MAX_SIZE);
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
_______________________________________________
Intel-gfx mailing list [email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: warning for drm/i915: intel_audio clear eld buf when disconnecting monitor
In reply to [email protected]== Series Details ==
== Series Details ==
Series: drm/i915: intel_audio clear eld buf when disconnecting monitor
URL : https://patchwork.freedesktop.org/series/4685/
State : warning
== Summary ==
Series 4685v1 drm/i915: intel_audio clear eld buf when disconnecting monitor
http://patchwork.freedesktop.org/api/1.0/series/4685/revisions/1/mbox/
Test gem_ringfill:
Subgroup basic-default-s3:
dmesg-warn -> PASS (bsw-nuc-2)
Test kms_flip:
Subgroup basic-flip-vs-dpms:
pass -> DMESG-WARN (ilk-hp8440p) UNSTABLE
Subgroup basic-flip-vs-wf_vblank:
fail -> PASS (byt-nuc)
Test kms_pipe_crc_basic:
Subgroup nonblocking-crc-pipe-a:
dmesg-warn -> PASS (snb-x220t)
Subgroup read-crc-pipe-b-frame-sequence:
pass -> DMESG-WARN (snb-x220t)
Subgroup suspend-read-crc-pipe-c:
incomplete -> PASS (hsw-gt2)
Test kms_setmode:
Subgroup basic-clone-single-crtc:
pass -> DMESG-WARN (snb-dellxps)
Test pm_rpm:
Subgroup basic-pci-d3-state:
pass -> DMESG-WARN (bsw-nuc-2)
dmesg-warn -> PASS (snb-dellxps)
pass -> DMESG-WARN (byt-nuc)
Subgroup basic-rte:
pass -> DMESG-WARN (snb-x220t)
pass -> DMESG-WARN (snb-dellxps)bdw-nuci7 total:194 pass:182 dwarn:0 dfail:0 fail:0 skip:12 bdw-ultra total:194 pass:173 dwarn:0 dfail:0 fail:0 skip:21 bsw-nuc-2 total:194 pass:156 dwarn:1 dfail:0 fail:0 skip:37 byt-nuc total:194 pass:158 dwarn:1 dfail:0 fail:0 skip:35 hsw-brixbox total:194 pass:172 dwarn:0 dfail:0 fail:0 skip:22 hsw-gt2 total:194 pass:175 dwarn:2 dfail:0 fail:0 skip:17 ilk-hp8440p total:194 pass:130 dwarn:1 dfail:0 fail:0 skip:63 ivb-t430s total:194 pass:169 dwarn:0 dfail:0 fail:0 skip:25 skl-i7k-2 total:194 pass:171 dwarn:0 dfail:0 fail:0 skip:23 snb-dellxps total:194 pass:158 dwarn:2 dfail:0 fail:0 skip:34 snb-x220t total:194 pass:158 dwarn:2 dfail:0 fail:1 skip:33
Results at /archive/results/CI_IGT_test/Patchwork_1653/
e7a7673e9840fe8b50a5a2894c75565ec7858a00 drm-intel-nightly: 2016y-03m-19d-10h-09m-53s UTC integration manifest ca71453a80d21b9b3b4647d994bdd2cd8d68565a drm/i915: intel_audio clear eld buf when disconnecting monitor
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx