Enable HP output on nVidia Corporation MCP79 HDA (rev b1) (Macbook Pro 5, 5)
PATCH 1/1 Enable HP output on nVidia Corporation MCP79 HDA (rev b1) (Macbook Pro 5, 5)
Hi,
The patch below, to be applied on the latest sound-unstable-2.6.git, enables headphones output on my MacBookPro 5,5, together with the automuting feature.
Here is the exact soundcard id:
Vendor Id: 0x10134206 Subsystem Id: 0x106b4d00 Revision Id: 0x100301
Thanks for the previous efforts to make this work !
Stelian.
sound/pci/hda/patch_cirrus.c +10 -4
@@ -832,6 +832,12 @@ static void cs_automute(struct hda_codec *codec)AC_VERB_SET_PIN_WIDGET_CONTROL , hp_present ? 0 : PIN_OUT); } +if (spec->board_config ==CS420X_MBP55 ) { +if (hp_present) +snd_hda_codec_write (codec,0x01 ,0 ,AC_VERB_SET_GPIO_DATA ,0x2 ); +else +snd_hda_codec_write (codec,0x01 ,0 ,AC_VERB_SET_GPIO_DATA ,0x8 ); + } }static void cs_automic (struct hda_codec *codec)
@@ -1133,10 +1139,10 @@ static int patch_cs420x(struct hda_codec *codec)switch (spec->board_config) {case CS420X_MBP55 : -/* GPIO3 = EAPD? */ - spec->gpio_mask =0x08 ; - spec->gpio_dir =0x08 ; - spec->gpio_data =0x08 ; +/* GPIO1 = headphones */ +/* GPIO3 = speakers */ + spec->gpio_mask =0x0a ; + spec->gpio_dir =0x0a ;break ; }
Signature · 1 line
Stelian Pop <[email protected]>
At Thu, 30 Jul 2009 14:44:27 +0200,
Quoted 7 lines · Stelian Pop
Hi,
The patch below, to be applied on the latest sound-unstable-2.6.git, enables headphones output on my MacBookPro 5,5, together with the automuting feature.
Quoted 6 lines
Here is the exact soundcard id:
Vendor Id: 0x10134206 Subsystem Id: 0x106b4d00 Revision Id: 0x100301Thanks for the previous efforts to make this work !
Great, this is *the* missing piece!
I'm going to merge the hda-cirrus patch back to the (stable) sound GIT tree so that it'll be merged into the next 2.6.32 kernel.
Thanks!
Takashi
Quoted 43 lines
Stelian.
sound/pci/hda/patch_cirrus.c +10
-4@@ -832,6 +832,12 @@ static void cs_automute(struct hda_codec *codec)AC_VERB_SET_PIN_WIDGET_CONTROL , hp_present ? 0 : PIN_OUT); } +if (spec->board_config ==CS420X_MBP55 ) { +if (hp_present) +snd_hda_codec_write (codec,0x01 ,0 ,AC_VERB_SET_GPIO_DATA ,0x2 ); +else +snd_hda_codec_write (codec,0x01 ,0 ,AC_VERB_SET_GPIO_DATA ,0x8 ); + } }static void cs_automic (struct hda_codec *codec)@@ -1133,10 +1139,10 @@ static int patch_cs420x(struct hda_codec *codec)switch (spec->board_config) {case CS420X_MBP55 : -/* GPIO3 = EAPD? */ - spec->gpio_mask =0x08 ; - spec->gpio_dir =0x08 ; - spec->gpio_data =0x08 ; +/* GPIO1 = headphones */ +/* GPIO3 = speakers */ + spec->gpio_mask =0x0a ; + spec->gpio_dir =0x0a ;break ; }Signature · 6 lines
-- Stelian Pop <[email protected]> _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 1 line · Takashi Iwai
Great, this is *the* missing piece!
Yup. Everything seems to work fine now.
Quoted 2 lines
I'm going to merge the hda-cirrus patch back to the (stable) sound GIT tree so that it'll be merged into the next 2.6.32 kernel.
Cool. Thanks !
Stelian.
Signature · 1 line
Stelian Pop <[email protected]>
At Thu, 30 Jul 2009 15:05:43 +0200,
Quoted 11 lines · Stelian Pop
Quoted 1 line · Takashi Iwai
Great, this is *the* missing piece!
Yup. Everything seems to work fine now.
Quoted 2 lines
I'm going to merge the hda-cirrus patch back to the (stable) sound GIT tree so that it'll be merged into the next 2.6.32 kernel.
Cool. Thanks !
Now it's done. You can use alsa-driver-snapshot (not unstable one) from now on. It might take some time until the server is sync'ed. But it's already out from my local machine :)
thanks,
Takashi
At Thu, 30 Jul 2009 15:07:39 +0200,
Quoted 10 lines · I wrote:
At Thu, 30 Jul 2009 15:05:43 +0200,
Quoted 7 lines · Stelian Pop
Quoted 1 line · Takashi Iwai
Great, this is *the* missing piece!
Yup. Everything seems to work fine now.
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
I'm going to merge the hda-cirrus patch back to the (stable) sound GIT tree so that it'll be merged into the next 2.6.32 kernel.
Cool. Thanks !
Now it's done. You can use alsa-driver-snapshot (not unstable one) from now on. It might take some time until the server is sync'ed. But it's already out from my local machine :)
Oops, I forgot to update alsa-driver-build GIT tree, thus the snapshot tarball failed to build. Fixed now. Let me know if you still see the problems.
thanks,
Takashi