double fault in 2.6.19rc4-git5 while unplugging/replugging a USB headset
FYI
usb 5-2: USB disconnect, address 2
ALSA /home/lsrc/quilt/linux/sound/usb/usbaudio.c:845: cannot submit datapipe for urb 0, error -19: no device [... repeated a lot ...]
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
input: C-Media USB Headphone Set as /class/input/input3
input: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1d.3-2
usb 5-2: USB disconnect, address 3
Unable to handle kernel paging request at ffffffff880e57d4 RIP: [<ffffffff880e57d4>] PGD 203027 PUD 205027 PMD 7f41e067 PTE 0 Oops: 0010 [1] SMP CPU 0 Modules linked in: snd_pcm_oss snd_mixer_oss snd_seq snd_atiixp snd_ac97_codec snd_ac97_bus speedstep_centrino pppoe pppox ppp_generic slhc ipt_MASQUERADE iptable_nat ip_nat_h323 ip_conntrack_h323 ip_nat_sip ip_conntrack_sip ip_nat_ftp ip_nat_irc i2c_isa ip_nat ip6t_LOG ip6t_REJECT ip6table_filter ip6_tables xt_tcpudp xt_state ip_conntrack_ftp ip_conntrack_irc ip_conntrack ipt_LOG ipt_REJECT iptable_filter ip_tables x_tables pl2303 snd_usb_audio snd_pcm snd_timer snd_page_alloc snd_usb_lib snd_rawmidi snd_seq_device snd_hwdep snd usbserial i2c_i801 i2c_core Pid: 8104, comm: xmms Not tainted 2.6.19-rc4-git5-BASIL #99 RIP: 0010:[<ffffffff880e57d4>] [<ffffffff880e57d4>] RSP: 0018:ffff81004730fd50 EFLAGS: 00010286 RAX: ffffffff880e57d4 RBX: ffff810075368000 RCX: 0000000000000000 RDX: 000000000000001d RSI: 0000000000000002 RDI: ffff810075368230 RBP: ffff810075368230 R08: ffff81007a5711f0 R09: ffff81005e5345c0 R10: 00000000454e8c24 R11: ffff81007bd030b8 R12: 00000000000001f8 R13: ffff810057422460 R14: ffff810045b7a5c0 R15: ffff81007a4b9080 FS: 0000000000000000(0000) GS:ffffffff80662000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffff880e57d4 CR3: 0000000000201000 CR4: 00000000000006e0 Process xmms (pid: 8104, threadinfo ffff81004730e000, task ffff810076fee180) Stack: ffffffff880a2cd6 0000000000000000 0000000000000001 ffff81007604bcf0 ffffffff8024c42b 0000000000000000 ffffffff8058b290 0000001f45880508 ffff810001f3fe50 0000000300000000 ffff81007a5711e8 0000000000000000 Call Trace: [<ffffffff880a2cd6>] :snd_mixer_oss:snd_mixer_oss_notify_handler+0x23e/0x271 [<ffffffff8024c42b>] free_pages_bulk+0x2c/0x1f4 [<ffffffff802229d2>] __wake_up+0x36/0x4d [<ffffffff880166d7>] :snd:snd_card_do_free+0x17/0xe4 [<ffffffff88016e3d>] :snd:snd_card_file_remove+0xfd/0x135 [<ffffffff88041fc7>] :snd_pcm:snd_pcm_release+0xb6/0xc1 [<ffffffff8026745a>] __fput+0xac/0x18a [<ffffffff802653d4>] filp_close+0x5c/0x64 [<ffffffff8022a913>] put_files_struct+0x6b/0xbd [<ffffffff8022ba84>] do_exit+0x233/0x814 [<ffffffff8022c0eb>] sys_exit_group+0x0/0xe [<ffffffff802093fe>] system_call+0x7e/0x83 Code: Bad RIP value.
RIP [<ffffffff880e57d4>]
RSP <ffff81004730fd50>
CR2: ffffffff880e57d4
<1>Fixing recursive fault but reboot is needed!
-Andi
At Mon, 6 Nov 2006 02:20:06 +0100,
Quoted 39 lines · Andi Kleen
FYI
usb 5-2: USB disconnect, address 2
ALSA/home/lsrc/quilt/linux/sound/usb/usbaudio.c:845: cannot submit datapipe for urb 0, error -19: no device [... repeated a lot ...]
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
usb 5-2: new full speed USB device usinguhci_hcdand address 3
usb 5-2: configuration #1 chosen from 1 choice
input: C-Media USB Headphone Set as /class/input/input3
input: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1d.3-2
usb 5-2: USB disconnect, address 3Unable to handle kernel paging request at ffffffff880e57d4 RIP: [<ffffffff880e57d4>] PGD 203027 PUD 205027 PMD 7f41e067 PTE 0 Oops: 0010 [1] SMP CPU 0 Modules linked in: snd_pcm_oss snd_mixer_oss snd_seq snd_atiixp snd_ac97_codec snd_ac97_bus speedstep_centrino pppoe pppox ppp_generic slhc ipt_MASQUERADE iptable_nat ip_nat_h323 ip_conntrack_h323 ip_nat_sip ip_conntrack_sip ip_nat_ftp ip_nat_irc i2c_isa ip_nat ip6t_LOG ip6t_REJECT ip6table_filter ip6_tables xt_tcpudp xt_state ip_conntrack_ftp ip_conntrack_irc ip_conntrack ipt_LOG ipt_REJECT iptable_filter ip_tables x_tables pl2303 snd_usb_audio snd_pcm snd_timer snd_page_alloc snd_usb_lib snd_rawmidi snd_seq_device snd_hwdep snd usbserial i2c_i801 i2c_core Pid: 8104, comm: xmms Not tainted 2.6.19-rc4-git5-BASIL #99 RIP: 0010:[<ffffffff880e57d4>] [<ffffffff880e57d4>] RSP: 0018:ffff81004730fd50 EFLAGS: 00010286 RAX: ffffffff880e57d4 RBX: ffff810075368000 RCX: 0000000000000000 RDX: 000000000000001d RSI: 0000000000000002 RDI: ffff810075368230 RBP: ffff810075368230 R08: ffff81007a5711f0 R09: ffff81005e5345c0 R10: 00000000454e8c24 R11: ffff81007bd030b8 R12: 00000000000001f8 R13: ffff810057422460 R14: ffff810045b7a5c0 R15: ffff81007a4b9080 FS: 0000000000000000(0000) GS:ffffffff80662000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffff880e57d4 CR3: 0000000000201000 CR4: 00000000000006e0 Process xmms (pid: 8104, threadinfo ffff81004730e000, task ffff810076fee180) Stack: ffffffff880a2cd6 0000000000000000 0000000000000001 ffff81007604bcf0 ffffffff8024c42b 0000000000000000 ffffffff8058b290 0000001f45880508 ffff810001f3fe50 0000000300000000 ffff81007a5711e8 0000000000000000 Call Trace: [<ffffffff880a2cd6>] :snd_mixer_oss:snd_mixer_oss_notify_handler+0x23e/0x271 [<ffffffff8024c42b>] free_pages_bulk+0x2c/0x1f4 [<ffffffff802229d2>] __wake_up+0x36/0x4d [<ffffffff880166d7>] :snd:snd_card_do_free+0x17/0xe4
Quoted 8 lines
[<ffffffff88016e3d>] :snd:snd_card_file_remove+0xfd/0x135 [<ffffffff88041fc7>] :snd_pcm:snd_pcm_release+0xb6/0xc1 [<ffffffff8026745a>] __fput+0xac/0x18a [<ffffffff802653d4>] filp_close+0x5c/0x64 [<ffffffff8022a913>] put_files_struct+0x6b/0xbd [<ffffffff8022ba84>] do_exit+0x233/0x814 [<ffffffff8022c0eb>] sys_exit_group+0x0/0xe [<ffffffff802093fe>] system_call+0x7e/0x83
How did it happen? You plugged out a usb adaptor during xmms is running with OSS output mode?
Takashi
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
Quoted 4 lines
How did it happen? You plugged out a usb adaptor during xmms is running with OSS output mode?
xmms was running yes. But I think the oops happened on replug.
Long story: i had the headset connected during boot and my XMMS insisted on outputing its music on it, which wasn't intended -- i wanted it on the speakers connected to the motherboard sound chip.
So i unplug the headset and restarted alsa initialization, but it was very unhappy about cleaning up and couldn't initialize the other sound card. I replugged the headset and then I got the oops.
-Andi
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
At Mon, 6 Nov 2006 18:03:42 +0100,
Quoted 8 lines · Andi Kleen
Quoted 5 lines
How did it happen? You plugged out a usb adaptor during xmms is running with OSS output mode?
xmms was running yes. But I think the oops happened on replug.
Quoted 8 lines
Long story: i had the headset connected during boot and my XMMS insisted on outputing its music on it, which wasn't intended -- i wanted it on the speakers connected to the motherboard sound chip.
So i unplug the headset and restarted alsa initialization, but it was very unhappy about cleaning up and couldn't initialize the other sound card. I replugged the headset and then I got the oops.
OK I got a lockup with my laptop and usb-audio replugging and xmms, too.
The patch below fixed the lockup problem on my machine. Could you check whether it fixes your case, too?
thanks,
Takashi
sound/core/oss/pcm_oss.c +2 -1
@@ -2359,7 +2359,8 @@ static int snd_pcm_oss_release(struct in substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_CAPTURE ];snd_assert (substream !=NULL , return -ENXIO ); pcm = substream->pcm; -snd_pcm_oss_sync (pcm_oss_file); +if (!pcm->card->shutdown) +snd_pcm_oss_sync (pcm_oss_file);mutex_lock (&pcm->open_mutex);snd_pcm_oss_release_file (pcm_oss_file);mutex_unlock (&pcm->open_mutex);
sound/core/pcm_native.c +4 -2
@@ -1310,7 +1310,8 @@ static int snd_pcm_pre_prepare(struct sn int f_flags) {struct snd_pcm_runtime *runtime = substream->runtime; -if (runtime->status->state ==SNDRV_PCM_STATE_OPEN ) +if (runtime->status->state ==SNDRV_PCM_STATE_OPEN || + runtime->status->state ==SNDRV_PCM_STATE_DISCONNECTED )return -EBADFD ;if (snd_pcm_running (substream))return -EBUSY ;
@@ -1568,7 +1569,8 @@ static int snd_pcm_drop(struct snd_pcm_s runtime = substream->runtime; card = substream->pcm->card; -if (runtime->status->state ==SNDRV_PCM_STATE_OPEN ) +if (runtime->status->state ==SNDRV_PCM_STATE_OPEN || + runtime->status->state ==SNDRV_PCM_STATE_DISCONNECTED )return -EBADFD ;snd_power_lock (card);
sound/usb/usbaudio.c +2 -1
@@ -1469,7 +1469,8 @@ static int snd_usb_hw_free(struct snd_pc subs->cur_audiofmt =NULL ; subs->cur_rate =0 ; subs->period_bytes =0 ; -release_substream_urbs (subs,0 ); +if (!subs->stream->chip->shutdown) +release_substream_urbs (subs,0 );return snd_pcm_free_vmalloc_buffer (substream); }
At Mon, 6 Nov 2006 18:03:42 +0100,
Quoted 8 lines · Andi Kleen
Quoted 5 lines
How did it happen? You plugged out a usb adaptor during xmms is running with OSS output mode?
xmms was running yes. But I think the oops happened on replug.
Quoted 8 lines
Long story: i had the headset connected during boot and my XMMS insisted on outputing its music on it, which wasn't intended -- i wanted it on the speakers connected to the motherboard sound chip.
So i unplug the headset and restarted alsa initialization, but it was very unhappy about cleaning up and couldn't initialize the other sound card. I replugged the headset and then I got the oops.
OK I got a lockup with my laptop and usb-audio replugging and xmms, too.
The patch below fixed the lockup problem on my machine. Could you check whether it fixes your case, too?
thanks,
Takashi
sound/core/oss/pcm_oss.c +2 -1
@@ -2359,7 +2359,8 @@ static int snd_pcm_oss_release(struct in substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_CAPTURE ];snd_assert (substream !=NULL , return -ENXIO ); pcm = substream->pcm; -snd_pcm_oss_sync (pcm_oss_file); +if (!pcm->card->shutdown) +snd_pcm_oss_sync (pcm_oss_file);mutex_lock (&pcm->open_mutex);snd_pcm_oss_release_file (pcm_oss_file);mutex_unlock (&pcm->open_mutex);
sound/core/pcm_native.c +4 -2
@@ -1310,7 +1310,8 @@ static int snd_pcm_pre_prepare(struct sn int f_flags) {struct snd_pcm_runtime *runtime = substream->runtime; -if (runtime->status->state ==SNDRV_PCM_STATE_OPEN ) +if (runtime->status->state ==SNDRV_PCM_STATE_OPEN || + runtime->status->state ==SNDRV_PCM_STATE_DISCONNECTED )return -EBADFD ;if (snd_pcm_running (substream))return -EBUSY ;
@@ -1568,7 +1569,8 @@ static int snd_pcm_drop(struct snd_pcm_s runtime = substream->runtime; card = substream->pcm->card; -if (runtime->status->state ==SNDRV_PCM_STATE_OPEN ) +if (runtime->status->state ==SNDRV_PCM_STATE_OPEN || + runtime->status->state ==SNDRV_PCM_STATE_DISCONNECTED )return -EBADFD ;snd_power_lock (card);
sound/usb/usbaudio.c +2 -1
@@ -1469,7 +1469,8 @@ static int snd_usb_hw_free(struct snd_pc subs->cur_audiofmt =NULL ; subs->cur_rate =0 ; subs->period_bytes =0 ; -release_substream_urbs (subs,0 ); +if (!subs->stream->chip->shutdown) +release_substream_urbs (subs,0 );return snd_pcm_free_vmalloc_buffer (substream); }
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642