README updates
PATCH 1/1 README updates
Index: alsa-firmware/mixartloader/README
===================================================================
RCS file: /cvsroot/alsa/alsa-firmware/mixartloader/README,v retrieving revision 1.1
mixartloader/README +2 -2
@@ -1,5 +1,5 @@ -GENRAL -====== +GENERAL +======= This directory contains the firmware data files for mixartloader utility in alsa-tools package. Install this with the same prefix
Index: alsa-firmware/usx2yloader/README
===================================================================
RCS file: /cvsroot/alsa/alsa-firmware/usx2yloader/README,v retrieving revision 1.1
usx2yloader/README +2 -2
@@ -1,5 +1,5 @@ -GENRAL -====== +GENERAL +======= This directory contains the firmware data files for usx2yloader utility in alsa-tools package. Install this with the same prefix
Index: alsa-tools/usx2yloader/README
===================================================================
RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/README,v retrieving revision 1.2
usx2yloader/README +16 -15
@@ -7,36 +7,37 @@ Usx2yloader is a helper program to load the 2nd Phase firmware binaries onto the Tascam USX2Y USB soundcards. -It has proven to work so far only for the US428. -US122 & US224 will hopefully follow. -The snd-usb-us428 module requires this program. +It has proven to work so far for the US122, US224 and US428. +The snd-usb-usx2y module requires this program. -US428 initialisation outlined +USX2Y initialisation outlined ============================= A. Phase 1 -A.1. US428 is plugged to the PC and powered on. +A.1. USx2y is plugged to the PC and powered on. This makes the kernel see a new USB-device with the Vendor/Product - ID 0x1604/0x8000. + ID 0x1604/0x8000 (US428), 0x1604/0x8004 (US224) or 0x1604/0x8006 + (US122). The kernel reacts by starting the usb-hotplug script. A.2. The usb-hotplug script starts the executable fxload, - which transfers the EZUSB firmware to the US428. -A.3. The US428 disconnects itself from the USB-Bus and ... (see Phase 2). + which transfers the EZUSB firmware to the USx2y. +A.3. The USx2y disconnects itself from the USB-Bus and ... (see Phase 2). B. Phase 2 -B.1. The US428 reintroduces itself as USB-device with the Vendor/Product - ID 0x1604/0x8001. - The kernel reacts by loading the module snd-usb-us428, if it is not +B.1. The USx2y reintroduces itself as USB-device with the Vendor/Product + ID 0x1604/0x8001 (US428), 0x1604/0x8005 (US224) or 0x1604/0x8007 + (US122) + The kernel reacts by loading the module snd-usb-usx2y, if it is not already loaded. -B.2 The module snd-usb-us428 "takes" the US428 as its device and sets up +B.2 The module snd-usb-usx2y "takes" the USx2y as its device and sets up a "hardware dependent interface". (The module doesn't create any pcm nor midi devices now.) B.3 Subsequently the kernel starts the usb-hotplug script, which launches usx2yloader. -B.4 usx2yloader transfers the 2nd Phase firmware binary to the US428 by means +B.4 usx2yloader transfers the 2nd Phase firmware binary to the USx2y by means of the "hardware dependent interface". When this transfer finishes, - the snd-usb-us428 module creates the pcm- and midi-devices. + the snd-usb-usx2y module creates the pcm- and midi-devices. Initialisation is complete.
@@ -63,7 +64,7 @@ - tascam_fw - tascam_fpga and the Firmwarefiles. -You also need hotplug to be installed. +You also need fxload and hotplug to be installed. FIRMWAREFILES
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
Takashi Iwai
AppliedHi Martin,
applied to cvs. thanks.
Takashi
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click