Betr.: RE: [parisc-linux] visualize C360/785 install
Quoted 7 lines
I've problems booting it from cd.
Here is what I getHARD Booted.
palo ipl 0.92 root@spqr Mon Jun 25 23:03:13 CEST 2001
.........
Quoted 13 lines
Kernel: partition 0 file /vmlinux
Ramdisk: partition 0 file /ramdisk
Warning: kernel name doesn't end with 32 or 64... Guessing 32 ELF32 executable
Entry 00100000 first 00100000 n 4
Segment 0 load 00100000 size 1606948 mediaptr0x1000Segment 1 load0028a000size 468472 mediaptr0x18a000Segment 2 load 00300000 size 8192 mediaptr0x1fd000Segment 3 load0034bea8size 80688 mediaptr0x1ffea8Loading ramdisk 1991209 bytes @3fe09000... branching to kernel entry point0x00100000
Set default PSW W bit to 0
I have exactly the same problem with my C200, so you could look op the thread 'Is a C200+ currently supported' where Brad tells me to use the serial console, and why. I haven't yet gotten my serial console to work, I have reason to believe I have a 1:1 serial cable, while I should have gotten an interlink cable. The last message was send yesterday, so it isn't old yet.
Wether or not I need to set some options in the boot menu or just have to unplug keyboard/mouse/monitor to get the serial console is yet an open question.
Good luck,
Jurriaan