Skip to contentSkip to conversation

errors when I "bitbake" an image for my rpi2 B+ board

meta-raspberrypi 张健 3 participants 6 messages Feb 3, 2016 – Feb 4, 2016

lore
Share & tools
lore

张健

author
#0 lore raw

[meta-raspberrypi]
Hi,every one.
I'm trying to use meta-raspberrypi layer to build an image for my raspberrypi2 B+ board.

After I download poky,I git clone meta-raspberrypi layer as follows: "git clone git://git.yoctoproject.org/meta-raspberrypi"

Then I totally follow the README in the meta-raspberrypi directory as follows:
"
.........
How to use it:

1. source poky/oe-init-build-env rpi-build
2. Add needed layer to bblayers.conf:
- meta-raspberrypi
3 Set MACHINE to "raspberrypi"/"raspberrypi2" in local.conf (I set machine to be "raspberrypi2" here)
4. bitbake rpi-hwup-image
5. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
6. Boot your RPI.

"

but it comes out with several errors after "bitbake", I don't know why, warnings and errors are as follows:
"
WARNING: Failed to fetch URL ftp://invisible-island.net/ncurses/current/ncurses-5.9-20150329.tgz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
wget: unable to resolve host address 'kernel.org'

ERROR: Function failed: Fetcher failure for URL: 'http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/jackzhang1992/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/linux-libc-headers/4.1-r0/temp/log.do_fetch.8031
ERROR: Task 961 (/home/jackzhang1992/poky/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_4.1.bb, do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.12.0.0.tar.xz, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
wget: unable to resolve host address 'ymorin.is-a-geek.org'

ERROR: Function failed: Fetcher failure for URL: 'http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.12.0.0.tar.xz'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/jackzhang1992/poky/build/tmp/work/i686-linux/kconfig-frontends-native/3.12.0.0-r0/temp/log.do_fetch.8067
ERROR: Task 728 (virtual:native:/home/jackzhang1992/poky/meta/recipes-devtools/kconfig-frontends/kconfig-frontends_3.12.0.0.bb, do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL http://dotat.at/prog/unifdef/unifdef-2.10.tar.xz, attempting MIRRORS if available
NOTE: Tasks Summary: Attempted 152 tasks of which 0 didn't need to be rerun and 2 failed.

"

According to the errors, It seams there are many fetcher failures,but when I copy the link such as"http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz" to my firefox explorer, It could find the files. It is very weird.

If you have any idea about it, pls contact with me. Thanks

Jack
Shanghai

#1 lore raw

Hi Jack,
How about wget or curl of those urls, are you able to reach it? Also, see if explorer redirects this to https or other protocol?

Regards,
Sivasubramanian

Quoted 86 lines · 张健

[meta-raspberrypi]
Hi,every one.
I'm trying to use meta-raspberrypi layer to build an image for my raspberrypi2 B+ board.

After I download poky,I git clone meta-raspberrypi layer as follows: "git clone git://git.yoctoproject.org/meta-raspberrypi"
Then I totally follow the README in the meta-raspberrypi directory as follows:
"
.........
How to use it:

1. source poky/oe-init-build-env rpi-build
2. Add needed layer to bblayers.conf:
- meta-raspberrypi
3 Set MACHINE to "raspberrypi"/"raspberrypi2" in local.conf (I set machine to be "raspberrypi2" here)
4. bitbake rpi-hwup-image
5. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
6. Boot your RPI.
"

but it comes out with several errors after "bitbake", I don't know why, warnings and errors are as follows:
"
WARNING: Failed to fetch URL ftp://invisible-island.net/ncurses/current/ncurses-5.9-20150329.tgz, attempting MIRRORS if available
WARNING: Failed to fetch URL
http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
wget: unable to resolve host address 'kernel.org'

ERROR: Function failed: Fetcher failure for URL: '
http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz'. Unable to
fetch URL from any source.
ERROR: Logfile of failure stored in:
/home/jackzhang1992/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/linux-libc-headers/4.1-r0/temp/log.do_fetch.8031
ERROR: Task 961
(/home/jackzhang1992/poky/meta/recipes-kernel/linux-libc-headers/
linux-libc-headers_4.1.bb, do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL
http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.12.0.0.tar.xz,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
wget: unable to resolve host address 'ymorin.is-a-geek.org'

ERROR: Function failed: Fetcher failure for URL: '
http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.12.0.0.tar.xz'.
Unable to fetch URL from any source.
ERROR: Logfile of failure stored in:
/home/jackzhang1992/poky/build/tmp/work/i686-linux/kconfig-frontends-native/3.12.0.0-r0/temp/log.do_fetch.8067
ERROR: Task 728 (virtual:native:/home/jackzhang1992/poky/meta/recipes-devtools/kconfig-frontends/ kconfig-frontends_3.12.0.0.bb, do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL
http://dotat.at/prog/unifdef/unifdef-2.10.tar.xz, attempting MIRRORS if
available
NOTE: Tasks Summary: Attempted 152 tasks of which 0 didn't need to be
rerun and 2 failed.
"

According to the errors, It seams there are many fetcher failures,but when I copy the link such as"
http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz" to my firefox explorer, It could find the files. It is very weird.

If you have any idea about it, pls contact with me. Thanks

Jack
Shanghai

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

author
#2 lore raw

Re: [meta-raspberrypi] errors when I "bitbake" an image formy rpi2 B+ board

Hi, Sivasubramanian:
Yes, I am able to reach it by using my firefox browser to reach it, It works. And that's the most werid thing.
I'v asked this question on the '#yocto' IRC channel after I sent the first mail.
Someone in the channel told me to use the command: " bitbake kconfig-frontends-native -c fetch" to fetch . then use "bitbake rpi-hwup-image". My computer is building now, and I'm waiting to see the results. Another possible reason is maybe the speed of the internet. I used "wifi" and the linux is run under the VMware; Now I connect the cable to my computer(not wireless anymore), still linux in the VMware, though. And try "bitbake", and wait for the result.

Thanks,

Jack
Shanghai

------------------ Original ------------------

From:  "SIVA SUBRAMANIAN.P"<[email protected]>;
Date:  Wed, Feb 3, 2016 02:19 PM
To:  "JackZhang"<[email protected]>; 

Cc: "yocto"<[email protected]>;
Subject: Re: [yocto] [meta-raspberrypi] errors when I "bitbake" an image formy rpi2 B+ board

Hi Jack,

How about wget or curl of those urls, are you able to reach it? Also, see if explorer redirects this to https or other protocol?

Regards,

Sivasubramanian

On Wed, Feb 3, 2016 at 8:11 AM, 张健 <[email protected]> wrote:
[meta-raspberrypi]
Hi,every one.
I'm trying to use meta-raspberrypi layer to build an image for my raspberrypi2 B+ board.

After I download poky,I git clone meta-raspberrypi layer as follows: "git clone git://git.yoctoproject.org/meta-raspberrypi"

Then I totally follow the README in the meta-raspberrypi directory as follows:
"
.........
How to use it:

1. source poky/oe-init-build-env rpi-build
2. Add needed layer to bblayers.conf:
- meta-raspberrypi
3 Set MACHINE to "raspberrypi"/"raspberrypi2" in local.conf (I set machine to be "raspberrypi2" here)
4. bitbake rpi-hwup-image
5. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
6. Boot your RPI.

"

but it comes out with several errors after "bitbake", I don't know why, warnings and errors are as follows:
"
WARNING: Failed to fetch URL ftp://invisible-island.net/ncurses/current/ncurses-5.9-20150329.tgz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
wget: unable to resolve host address 'kernel.org'

ERROR: Function failed: Fetcher failure for URL: 'http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/jackzhang1992/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/linux-libc-headers/4.1-r0/temp/log.do_fetch.8031
ERROR: Task 961 (/home/jackzhang1992/poky/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_4.1.bb, do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.12.0.0.tar.xz, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
wget: unable to resolve host address 'ymorin.is-a-geek.org'

ERROR: Function failed: Fetcher failure for URL: 'http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.12.0.0.tar.xz'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/jackzhang1992/poky/build/tmp/work/i686-linux/kconfig-frontends-native/3.12.0.0-r0/temp/log.do_fetch.8067
ERROR: Task 728 (virtual:native:/home/jackzhang1992/poky/meta/recipes-devtools/kconfig-frontends/kconfig-frontends_3.12.0.0.bb, do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL http://dotat.at/prog/unifdef/unifdef-2.10.tar.xz, attempting MIRRORS if available
NOTE: Tasks Summary: Attempted 152 tasks of which 0 didn't need to be rerun and 2 failed.

"

According to the errors, It seams there are many fetcher failures,but when I copy the link such as"http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz" to my firefox explorer, It could find the files. It is very weird.

If you have any idea about it, pls contact with me. Thanks

Jack
Shanghai

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#3 lore raw

Re: [meta-raspberrypi] errors when I "bitbake" an image formy rpi2 B+ board

Hi Jack,

I recently had a similar issue, until I realize that "curl" was not installed on my Debian Jessie...

K.

________________________________
De : [email protected] <[email protected]> de la part de 张健 <[email protected]> Envoyé : mercredi 3 février 2016 07:33
À : SIVA SUBRAMANIAN.P
Cc : yocto
Objet : Re: [yocto] [meta-raspberrypi] errors when I "bitbake" an image formy rpi2 B+ board

Hi, Sivasubramanian:
Yes, I am able to reach it by using my firefox browser to reach it, It works. And that's the most werid thing.
I'v asked this question on the '#yocto' IRC channel after I sent the first mail.
Someone in the channel told me to use the command: " bitbake kconfig-frontends-native -c fetch" to fetch . then use "bitbake rpi-hwup-image". My computer is building now, and I'm waiting to see the results. Another possible reason is maybe the speed of the internet. I used "wifi" and the linux is run under the VMware; Now I connect the cable to my computer(not wireless anymore), still linux in the VMware, though. And try "bitbake", and wait for the result.

Thanks,

Jack
Shanghai

------------------ Original ------------------

From:  "SIVA SUBRAMANIAN.P"<[email protected]>;
Date:  Wed, Feb 3, 2016 02:19 PM
To:  "JackZhang"<[email protected]>;

Cc: "yocto"<[email protected]>;
Subject: Re: [yocto] [meta-raspberrypi] errors when I "bitbake" an image formy rpi2 B+ board

Hi Jack,
How about wget or curl of those urls, are you able to reach it? Also, see if explorer redirects this to https or other protocol?

Regards,
Sivasubramanian

On Wed, Feb 3, 2016 at 8:11 AM, 张健 <[email protected]<mailto:[email protected]>> wrote:
[meta-raspberrypi]
Hi,every one.
I'm trying to use meta-raspberrypi layer to build an image for my raspberrypi2 B+ board.

After I download poky,I git clone meta-raspberrypi layer as follows: "git clone git://git.yoctoproject.org/meta-raspberrypi<http://git.yoctoproject.org/meta-raspberrypi>"
Then I totally follow the README in the meta-raspberrypi directory as follows:
"
.........
How to use it:

1. source poky/oe-init-build-env rpi-build
2. Add needed layer to bblayers.conf:
- meta-raspberrypi
3 Set MACHINE to "raspberrypi"/"raspberrypi2" in local.conf (I set machine to be "raspberrypi2" here)
4. bitbake rpi-hwup-image
5. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
6. Boot your RPI.
"

but it comes out with several errors after "bitbake", I don't know why, warnings and errors are as follows:
"
WARNING: Failed to fetch URL ftp://invisible-island.net/ncurses/current/ncurses-5.9-20150329.tgz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
wget: unable to resolve host address 'kernel.org<http://kernel.org>'

ERROR: Function failed: Fetcher failure for URL: 'http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/jackzhang1992/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/linux-libc-headers/4.1-r0/temp/log.do_fetch.8031
ERROR: Task 961 (/home/jackzhang1992/poky/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_4.1.bb<http://linux-libc-headers_4.1.bb>, do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.12.0.0.tar.xz, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
wget: unable to resolve host address 'ymorin.is-a-geek.org<http://ymorin.is-a-geek.org>'

ERROR: Function failed: Fetcher failure for URL: 'http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.12.0.0.tar.xz'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/jackzhang1992/poky/build/tmp/work/i686-linux/kconfig-frontends-native/3.12.0.0-r0/temp/log.do_fetch.8067
ERROR: Task 728 (virtual:native:/home/jackzhang1992/poky/meta/recipes-devtools/kconfig-frontends/kconfig-frontends_3.12.0.0.bb<http://kconfig-frontends_3.12.0.0.bb>, do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL http://dotat.at/prog/unifdef/unifdef-2.10.tar.xz, attempting MIRRORS if available
NOTE: Tasks Summary: Attempted 152 tasks of which 0 didn't need to be rerun and 2 failed.
"

According to the errors, It seams there are many fetcher failures,but when I copy the link such as"http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz" to my firefox explorer, It could find the files. It is very weird.

If you have any idea about it, pls contact with me. Thanks

Jack
Shanghai

--
_______________________________________________
yocto mailing list [email protected]<mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto

author
#4 lore raw

Re: [meta-raspberrypi] errors when I "bitbake" an image formyrpi2 B+ board

Hi, Karim,
I have tried "sudo apt-get install curl", then do the "bitbake". But there are stiill many errors. detailed build logs are as follows:
"http://www.cnblogs.com/tianya-lemon/p/5179160.html"

Thank you so much for your ideas.

Jack
Shanghai
------------------ Original ------------------

From:  "Karim ATIKI"<[email protected]>;
Date:  Wed, Feb 3, 2016 04:28 PM
To:  "JackZhang"<[email protected]>; 

Cc: "yocto"<[email protected]>;
Subject: RE: [yocto] [meta-raspberrypi] errors when I "bitbake" an image formyrpi2 B+ board

Hi Jack,
I recently had a similar issue, until I realize that "curl" was not installed on my Debian Jessie...

K.

De : [email protected] <[email protected]> de la part de 张健 <[email protected]> Envoyé : mercredi 3 février 2016 07:33
À : SIVA SUBRAMANIAN.P
Cc : yocto
Objet : Re: [yocto] [meta-raspberrypi] errors when I "bitbake" an image formy rpi2 B+ board

Hi, Sivasubramanian:
Yes, I am able to reach it by using my firefox browser to reach it, It works. And that's the most werid thing.
I'v asked this question on the '#yocto' IRC channel after I sent the first mail.
Someone in the channel told me to use the command: " bitbake kconfig-frontends-native -c fetch" to fetch . then use "bitbake rpi-hwup-image". My computer is building now, and I'm waiting to see the results.
Another possible reason is maybe the speed of the internet. I used "wifi" and the linux is run under the VMware; Now I connect the cable to my computer(not wireless anymore), still linux in the VMware, though. And try "bitbake", and wait for the result.

Thanks,

Jack
Shanghai

------------------ Original ------------------
From: "SIVA SUBRAMANIAN.P"<[email protected]>;
Date: Wed, Feb 3, 2016 02:19 PM
To: "JackZhang"<[email protected]>;
Cc: "yocto"<[email protected]>;
Subject: Re: [yocto] [meta-raspberrypi] errors when I "bitbake" an image formy rpi2 B+ board

Hi Jack,

How about wget or curl of those urls, are you able to reach it? Also, see if explorer redirects this to https or other protocol?

Regards,

Sivasubramanian

On Wed, Feb 3, 2016 at 8:11 AM, 张健 <[email protected]> wrote:
[meta-raspberrypi]
Hi,every one.
I'm trying to use meta-raspberrypi layer to build an image for my raspberrypi2 B+ board.

After I download poky,I git clone meta-raspberrypi layer as follows: "git clone git://git.yoctoproject.org/meta-raspberrypi"

Then I totally follow the README in the meta-raspberrypi directory as follows:
"
.........
How to use it:

1. source poky/oe-init-build-env rpi-build
2. Add needed layer to bblayers.conf:
- meta-raspberrypi
3 Set MACHINE to "raspberrypi"/"raspberrypi2" in local.conf (I set machine to be "raspberrypi2" here)
4. bitbake rpi-hwup-image
5. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
6. Boot your RPI.

"

but it comes out with several errors after "bitbake", I don't know why, warnings and errors are as follows:
"
WARNING: Failed to fetch URL ftp://invisible-island.net/ncurses/current/ncurses-5.9-20150329.tgz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
wget: unable to resolve host address 'kernel.org'

ERROR: Function failed: Fetcher failure for URL: 'http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/jackzhang1992/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/linux-libc-headers/4.1-r0/temp/log.do_fetch.8031
ERROR: Task 961 (/home/jackzhang1992/poky/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_4.1.bb, do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.12.0.0.tar.xz, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
wget: unable to resolve host address 'ymorin.is-a-geek.org'

ERROR: Function failed: Fetcher failure for URL: 'http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.12.0.0.tar.xz'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/jackzhang1992/poky/build/tmp/work/i686-linux/kconfig-frontends-native/3.12.0.0-r0/temp/log.do_fetch.8067
ERROR: Task 728 (virtual:native:/home/jackzhang1992/poky/meta/recipes-devtools/kconfig-frontends/kconfig-frontends_3.12.0.0.bb, do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL http://dotat.at/prog/unifdef/unifdef-2.10.tar.xz, attempting MIRRORS if available
NOTE: Tasks Summary: Attempted 152 tasks of which 0 didn't need to be rerun and 2 failed.

"

According to the errors, It seams there are many fetcher failures,but when I copy the link such as"http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz" to my firefox explorer, It could find the files. It is very weird.

If you have any idea about it, pls contact with me. Thanks

Jack
Shanghai

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#5 lore raw

Re: [meta-raspberrypi] errors when I "bitbake" an image formyrpi2 B+ board

Hi Jack,

Could you provide the content of a log file ?

/home/jackzhang1992/poky/build/tmp/work/raspberrypi2-poky-linux-gnueabi/bcm2835-bootfiles/20151021-r3/temp/log.do_fetch.9874

Karim

________________________________
De : 张健 <[email protected]>
Envoyé : jeudi 4 février 2016 05:25
À : Karim ATIKI
Cc : yocto
Objet : Re:RE: [yocto] [meta-raspberrypi] errors when I "bitbake" an image formyrpi2 B+ board

Hi, Karim,
I have tried "sudo apt-get install curl", then do the "bitbake". But there are stiill many errors. detailed build logs are as follows:
"http://www.cnblogs.com/tianya-lemon/p/5179160.html"

Thank you so much for your ideas.

Jack
Shanghai
------------------ Original ------------------

From:  "Karim ATIKI"<[email protected]>;
Date:  Wed, Feb 3, 2016 04:28 PM
To:  "JackZhang"<[email protected]>;

Cc: "yocto"<[email protected]>;
Subject: RE: [yocto] [meta-raspberrypi] errors when I "bitbake" an image formyrpi2 B+ board

Hi Jack,

I recently had a similar issue, until I realize that "curl" was not installed on my Debian Jessie...

K.

________________________________
De : [email protected] <[email protected]> de la part de 张健 <[email protected]> Envoyé : mercredi 3 février 2016 07:33
À : SIVA SUBRAMANIAN.P
Cc : yocto
Objet : Re: [yocto] [meta-raspberrypi] errors when I "bitbake" an image formy rpi2 B+ board

Hi, Sivasubramanian:
Yes, I am able to reach it by using my firefox browser to reach it, It works. And that's the most werid thing.
I'v asked this question on the '#yocto' IRC channel after I sent the first mail.
Someone in the channel told me to use the command: " bitbake kconfig-frontends-native -c fetch" to fetch . then use "bitbake rpi-hwup-image". My computer is building now, and I'm waiting to see the results. Another possible reason is maybe the speed of the internet. I used "wifi" and the linux is run under the VMware; Now I connect the cable to my computer(not wireless anymore), still linux in the VMware, though. And try "bitbake", and wait for the result.

Thanks,

Jack
Shanghai

------------------ Original ------------------

From:  "SIVA SUBRAMANIAN.P"<[email protected]>;
Date:  Wed, Feb 3, 2016 02:19 PM
To:  "JackZhang"<[email protected]>;

Cc: "yocto"<[email protected]>;
Subject: Re: [yocto] [meta-raspberrypi] errors when I "bitbake" an image formy rpi2 B+ board

Hi Jack,
How about wget or curl of those urls, are you able to reach it? Also, see if explorer redirects this to https or other protocol?

Regards,
Sivasubramanian

On Wed, Feb 3, 2016 at 8:11 AM, 张健 <[email protected]<mailto:[email protected]>> wrote:
[meta-raspberrypi]
Hi,every one.
I'm trying to use meta-raspberrypi layer to build an image for my raspberrypi2 B+ board.

After I download poky,I git clone meta-raspberrypi layer as follows: "git clone git://git.yoctoproject.org/meta-raspberrypi<http://git.yoctoproject.org/meta-raspberrypi>"
Then I totally follow the README in the meta-raspberrypi directory as follows:
"
.........
How to use it:

1. source poky/oe-init-build-env rpi-build
2. Add needed layer to bblayers.conf:
- meta-raspberrypi
3 Set MACHINE to "raspberrypi"/"raspberrypi2" in local.conf (I set machine to be "raspberrypi2" here)
4. bitbake rpi-hwup-image
5. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
6. Boot your RPI.
"

but it comes out with several errors after "bitbake", I don't know why, warnings and errors are as follows:
"
WARNING: Failed to fetch URL ftp://invisible-island.net/ncurses/current/ncurses-5.9-20150329.tgz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
wget: unable to resolve host address 'kernel.org<http://kernel.org>'

ERROR: Function failed: Fetcher failure for URL: 'http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/jackzhang1992/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/linux-libc-headers/4.1-r0/temp/log.do_fetch.8031
ERROR: Task 961 (/home/jackzhang1992/poky/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_4.1.bb<http://linux-libc-headers_4.1.bb>, do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.12.0.0.tar.xz, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
wget: unable to resolve host address 'ymorin.is-a-geek.org<http://ymorin.is-a-geek.org>'

ERROR: Function failed: Fetcher failure for URL: 'http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.12.0.0.tar.xz'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/jackzhang1992/poky/build/tmp/work/i686-linux/kconfig-frontends-native/3.12.0.0-r0/temp/log.do_fetch.8067
ERROR: Task 728 (virtual:native:/home/jackzhang1992/poky/meta/recipes-devtools/kconfig-frontends/kconfig-frontends_3.12.0.0.bb<http://kconfig-frontends_3.12.0.0.bb>, do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL http://dotat.at/prog/unifdef/unifdef-2.10.tar.xz, attempting MIRRORS if available
NOTE: Tasks Summary: Attempted 152 tasks of which 0 didn't need to be rerun and 2 failed.
"

According to the errors, It seams there are many fetcher failures,but when I copy the link such as"http://kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.xz" to my firefox explorer, It could find the files. It is very weird.

If you have any idea about it, pls contact with me. Thanks

Jack
Shanghai

--
_______________________________________________
yocto mailing list [email protected]<mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto