Skip to contentSkip to conversation

VHUB didn't work on AST2500

DISCUSSION xiuzhi 1 participant 1 message Oct 29, 2018

lore
Share & tools
lore

xiuzhi

author
#0 lore raw

Hi Andrew,

Quoted 11 lines
Quoted 8 lines
[   66.751716] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request() 
failed for pin 67
[   66.759322] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: pin-67 
(1e780000.gpio:347) status -1
[   68.577538] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request() 
failed for pin 67
[   68.585288] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: pin-67 

(1e780000.gpio:347) status -1

Out of curiousity, what is causing the pinctrl failure? Do you have a mux clash?

it was caused by uart-render-controller.service:
"
ExecStart=/usr/sbin/obmc-uart-render-controller \ /sys/devices/platform/ahb/ahb:apb/1e6e2000.syscon/1e6e2000.syscon:scratch/vga0 \ /sys/devices/platform/ahb/ahb:apb/1e6e2000.syscon/1e6e2000.syscon:scratch/dac_mux \
fbterm.service

"
fbterm is related to keyinput.
AST2500 only support up to 228 gpio pins,but the error message read gpio:347 ,I don't know why ?

Best,
Xiuzhi
------------------ Original ------------------
From: "Andrew.Jeffery";<[email protected]>;
Send time: Sunday, Oct 28, 2018 3:02 PM
To: "xiuzhi"<[email protected]>; "Benjamin Herrenschmidt"<[email protected]>; "Eddie James"<[email protected]>; "Joel Stanley"<[email protected]>;
Cc: "openbmc"<[email protected]>; "Alexander A. Filippov"<[email protected]>;
Subject: Re: Re: VHUB didn't work on AST2500

Quoted 51 lines · xiuzhi

Hi Ben, Eddie,
I update the kernel,libvncserver,obmc-ikvm source to the latest git
commit numbers.
Now I can input number key 0-9, but still can't input any character key a-z .
1)kernel:
KSRC ?= "git://github.com/eddiejames/linux;protocol=git;branch=$ {KBRANCH}"
KBRANCH ?= "video-dev"
LINUX_VERSION ?= "4.18.12"
SRCREV = "b953727d56c4de63eb0fad1f079f41004e61d713"
and updated the defconfig,create_usbhid.sh as Eddie mentioned . 2)libvncserver
SRC_URI = "git://github.com/LibVNC/libvncserver"

SRCREV = "ca2a5ac02fbbadd0a21fabba779c1ea69173d10b" 3)obmc-ikvm
SRC_URI = "git://github.com/eddiejames/obmc-ikvm" SRCREV = "d548ee6c8f59c23552d61fb28b2ca2f20e6f3fe6"
4) I input key on host BIOS CLI:
"1234567890" 'Enter' : good ,can see them on host screen 'a' 'Enter':error ,see nothing
'b' 'Enter':error,see nothing
'c' 'Enter':error,see nothing "123456789"'Enter':good
The dmesg is :

[   57.002351] udc 1e6a0000.usb-vhub:p1: registering UDC driver 
[obmc_hid]
[   57.002452] configfs-gadget gadget: adding 'hid'/e5acc706 to config 
'c'/7ef6bc13
[   57.002488] aspeed_vhub 1e6a0000.usb-vhub: port1 Match EP type 3
[   57.002509] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocating gen EP 0 
for addr 1
[   57.013399] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocated epn#0 for 
port EP1
[   57.013435] aspeed_vhub 1e6a0000.usb-vhub: port1 Match EP type 3
[   57.013453] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocating gen EP 1 
for addr 2
[   57.018946] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocated epn#1 for 
port EP2
[   57.019463] aspeed_vhub 1e6a0000.usb-vhub: port1 start
[   57.019492] aspeed_vhub 1e6a0000.usb-vhub: port1 pullup(1)
[   57.019512] aspeed_vhub 1e6a0000.usb-vhub: port1 port 1 status 0000 -
Quoted 1 line

0001 (C=1)

[   66.751716] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request() 
failed for pin 67
[   66.759322] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: pin-67 
(1e780000.gpio:347) status -1
[   68.577538] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request() 
failed for pin 67
[   68.585288] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: pin-67 
Quoted 3 lines

(1e780000.gpio:347) status -1

Out of curiousity, what is causing the pinctrl failure? Do you have a mux clash?

          /sys/devices/platform/ahb/ahb:apb/1e6e2000.syscon/1e6e2000.syscon:scratch/vga0 \
          /sys/devices/platform/ahb/ahb:apb/1e6e2000.syscon/1e6e2000.syscon:scratch/dac_mux \
          fbterm.service
Quoted 561 lines
[  100.115387] aspeed_vhub 1e6a0000.usb-vhub: USB bus resume
[  100.115411] configfs-gadget gadget: resume
[  100.115427] aspeed_vhub 1e6a0000.usb-vhub: USB bus reset
[  100.258057] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
00/05/0002/0000/0000 [out] st=0
[  100.258092] aspeed_vhub 1e6a0000.usb-vhub: USB status=0b100000 
speed=high
[  100.258107] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SET_ADDRESS: Got 
address 2
[  100.279075] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
80/06/0100/0000/0008 [in] st=0
[  100.279103] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
GET_DESCRIPTOR(type:1)
[  100.283632] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
80/06/0100/0000/0012 [in] st=0
[  100.283664] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
GET_DESCRIPTOR(type:1)
[  100.288371] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
80/06/0200/0000/0008 [in] st=0
[  100.288405] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
GET_DESCRIPTOR(type:2)
[  100.292205] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
80/06/0200/0000/0019 [in] st=0
[  100.292235] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
GET_DESCRIPTOR(type:2)
[  100.300948] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
80/06/0300/0000/0002 [in] st=0
[  100.301268] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
80/06/0300/0000/0004 [in] st=0
[  100.301640] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
00/09/0001/0000/0000 [out] st=0
[  100.335144] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
a0/06/2900/0000/0002 [in] st=0
[  100.335178] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
GetHubDescriptor(0)
[  100.335196] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
GET_DESCRIPTOR(type:41)
[  100.335527] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
a0/06/2900/0000/0009 [in] st=0
[  100.335554] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
GetHubDescriptor(0)
[  100.335569] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
GET_DESCRIPTOR(type:41)
[  100.339672] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
23/03/0008/0001/0000 [out] st=0
[  100.339703] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
SetPortFeature(1,8)
[  100.339890] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
23/03/0008/0002/0000 [out] st=0
[  100.339912] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
SetPortFeature(2,8)
[  100.340139] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
23/03/0008/0003/0000 [out] st=0
[  100.340160] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
SetPortFeature(3,8)
[  100.340386] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
23/03/0008/0004/0000 [out] st=0
[  100.340404] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
SetPortFeature(4,8)
[  100.340637] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
23/03/0008/0005/0000 [out] st=0
[  100.340656] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
SetPortFeature(5,8)
[  100.360852] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
a0/00/0000/0000/0004 [in] st=0
[  100.360884] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetHubStatus
[  100.500028] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
a3/00/0000/0001/0004 [in] st=0
[  100.500062] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
[  100.500082] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0  port status=0101 
change=0001
[  100.500404] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
23/01/0010/0001/0000 [out] st=0
[  100.500435] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
ClearPortFeature(1,16)
[  100.615543] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
23/03/0004/0001/0000 [out] st=0
[  100.615579] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
SetPortFeature(1,4)
[  100.615594] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 Port reset !
[  100.615612] aspeed_vhub 1e6a0000.usb-vhub: port1 port 1 status 0001 -
Quoted 1 line

0011 (C=0)

[  100.615626] aspeed_vhub 1e6a0000.usb-vhub: port1 Reset at unknown 
speed of disabled device, enabling...
[  100.615643] aspeed_vhub 1e6a0000.usb-vhub: port1 port 1 status 0011 -
Quoted 1 line

0403 (C=1)

[  100.635854] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
a3/00/0000/0001/0004 [in] st=0
[  100.635885] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
[  100.635903] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0  port status=0503 
change=0012
[  100.636271] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
23/01/0011/0001/0000 [out] st=0
[  100.636299] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
ClearPortFeature(1,17)
[  100.636515] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
23/01/0014/0001/0000 [out] st=0
[  100.636540] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 
ClearPortFeature(1,20)
[  100.649529] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 
00/05/0003/0000/0000 [out] st=0
[  100.649564] aspeed_vhub 1e6a0000.usb-vhub: port1 fist packet, 
captured speed 3
[  100.649580] aspeed_vhub 1e6a0000.usb-vhub: port1 SET_ADDRESS: Got 
address 3
[  100.665314] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
a3/00/0000/0001/0004 [in] st=0
[  100.665345] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
[  100.665363] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0  port status=0503 
change=0000
[  100.680170] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 
80/06/0100/0000/0008 [in] st=0
[  100.680200] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to 
gadget...
[  100.680234] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 
0
[  100.684627] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 
80/06/0100/0000/0012 [in] st=0
[  100.684657] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to 
gadget...
[  100.684690] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 
0
[  100.689471] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 
80/06/0200/0000/0008 [in] st=0
[  100.689500] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to 
gadget...
[  100.689538] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 
0
[  100.693198] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 
80/06/0200/0000/0029 [in] st=0
[  100.693231] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to 
gadget...
[  100.693267] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 
0
[  100.701949] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 
80/06/0300/0000/0002 [in] st=0
[  100.701983] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to 
gadget...
[  100.702020] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 
0
[  100.702403] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 
80/06/0300/0000/0004 [in] st=0
[  100.702432] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to 
gadget...
[  100.702466] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 
0
[  100.702774] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 
00/09/0001/0000/0000 [out] st=0
[  100.702799] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to 
gadget...
[  100.702818] configfs-gadget gadget: high-speed config #1: c
[  100.708470] aspeed_vhub 1e6a0000.usb-vhub: port1:EP1 Enabling [in] 
intr num 1 maxpacket=11
[  100.708512] aspeed_vhub 1e6a0000.usb-vhub: port1:EP2 Enabling [out] 
intr num 2 maxpacket=11
[  100.708565] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 
0
[  100.777585] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 
80/08/0000/0000/0001 [in] st=0
[  100.777619] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to 
gadget...
[  100.777649] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 
0
[  100.778029] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 
a1/03/0000/0000/0001 [in] st=0
[  100.778055] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to 
gadget...
[  100.778085] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 
0
[  100.778403] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 
21/0b/0000/0000/0000 [out] st=0
[  100.778428] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to 
gadget...
[  100.778457] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 
0
[  100.778649] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 
21/09/0200/0000/0001 [out] st=0
[  100.778672] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to 
gadget...
[  100.778692] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 
-95
[  100.778704] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 stalling
[  100.778746] aspeed_vhub 1e6a0000.usb-vhub: status direction mismatch
[  100.859563] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 
21/09/0200/0000/0001 [out] st=0
[  100.859592] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to 
gadget...
[  100.859618] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 
-95
[  100.859633] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 stalling
[  100.892835] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
a3/00/0000/0001/0004 [in] st=0
[  100.892866] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
[  100.892882] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0  port status=0503 
change=0000
[  100.893278] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 
a0/00/0000/0000/0004 [in] st=0
[  100.893305] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetHubStatus

Best,
Xiuzhi

------------------ Original ------------------
From: "Benjamin Herrenschmidt";<[email protected]>; Send time: Saturday, Oct 27, 2018 7:55 AM
To: "xiuzhi"<[email protected]>; "Eddie James"<[email protected]>; "Joel Stanley"<[email protected]>;
Cc: "openbmc"<[email protected]>; "Alexander A. Filippov"<[email protected]>;
Subject: Re: Re: VHUB didn't work on AST2500

Quoted 4 lines · xiuzhi

Hi Eddie,
Thanks for your reply.
It seemd that the error was caused by the version dismatch of kernel ,libvncserver ,obmc-ikvm and vnc client. Would you like to give me your git commits numbers of them?

It's still a very strange error.

Once everything is up to date, let me know if it occurs again, there's something not right going on in the vhub driver causing that state mismatch error, it shouldn't happen. But I haven't managed to reproduce it here.

Cheers,
Ben.

Quoted 332 lines

Best,
xiuzhi

Quoted 16 lines · xiuzhi

Hi Ben,
I use vncviewer , xtightvncviewer 1.3.9-6.4ubuntu1.
And I also tested the ikvm by webui vnc(_https://gerrit.openbmc-project.xyz/#/c/openbmc/phosphor-webui/+/10268/_) ,the same errors occured.
The same source code obmc-ikvm and this kernel branch video-dev5 works on my other AST2400 hardware machine.
I remembered only one kernel version seemed to work on ast2500 ,I tested it six weeks ago .
the kernel version is:

KBRANCH ?= "video-dev"
LINUX_VERSION ?= "4.17.11" SRCREV="09a65900b2fc7aab9caf9d0dfabc7ba80525b1dd" the git repo is from git://github.com/eddiejames/linux/,

Quoted 5 lines

https://gerrit.openbmc-project.xyz/#/c/openbmc/openbmc/+/11500/5/meta-openbmc-bsp/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb
I want to test this kernel version ,but now this git repo is not available ,
I asked Eddiejames week ago, and get no response until now . It is so bad that I did not backup this kernel on my local machice.

I never made any kernel changes related to USB in my github trees, as far as I know, so shouldn't be any difference. That original gerrit commit was purely for our testing purposes for our system... not really something I can support actively.

I have a number of commits pending review that you could try and pull in if you really need this now:
https://gerrit.openbmc-project.xyz/#/c/openbmc/meta-phosphor/+/13536/
https://gerrit.openbmc-project.xyz/#/c/openbmc/meta-aspeed/+/13541/
https://gerrit.openbmc-project.xyz/#/c/openbmc/obmc-ikvm/+/12126/
https://gerrit.openbmc-project.xyz/#/c/openbmc/obmc-ikvm/+/13888/

Use these in combination with the two commits at the top of my video-dev linux tree for your kernel.

Thanks,
Eddie

Quoted 289 lines

Best.
Xiuzhi

Quoted 4 lines · xiuzhi

Hi Ben,
I open the CONFIG_USB_GADGET_DEBUG .
and input the following keys by order:
';''Enter' :work good,can see ';' on host screen

Quoted 8 lines

'a''Enter' :error,see anything on screen
'b''Enter' :error,see anything on screen
'1''Enter' :good
'2''Enter' :good
'3''Enter' :good
'4''Enter' :good
'5''Enter' :error deadlock
The log is:

Can you tell me more about the userspace components you use to send those keys ? I'd like to try to reproduce here.

Quoted 1 line
[   78.820671] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request() 

failed for pin 67

Quoted 1 line
[   78.828274] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: pin-67 

(1e780000.gpio:347) status -1

Quoted 1 line
[   80.698564] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request() 

failed for pin 67

Quoted 1 line
[   80.706166] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: pin-67 

(1e780000.gpio:347) status -

Quoted 1 line
[   94.447816] udc 1e6a0000.usb-vhub:p1: registering UDC driver 

[obmc_hid]

Quoted 1 line
[   94.447909] configfs-gadget gadget: adding 'hid'/15e5a204 to 

config 'c'/70dd0747

Quoted 2 lines
[   94.447940] aspeed_vhub 1e6a0000.usb-vhub: port1 Match EP type 3
[   94.447958] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocating gen 

EP 0 for addr 1

Quoted 1 line
[   94.448474] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocated epn#0 

for port EP1

Quoted 2 lines
[   94.448505] aspeed_vhub 1e6a0000.usb-vhub: port1 Match EP type 3
[   94.448522] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocating gen 

EP 1 for addr 2

Quoted 1 line
[   94.448780] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocated epn#1 

for port EP2

Quoted 3 lines
[   94.449270] aspeed_vhub 1e6a0000.usb-vhub: port1 start
[   94.449297] aspeed_vhub 1e6a0000.usb-vhub: port1 pullup(1)
[   94.449317] aspeed_vhub 1e6a0000.usb-vhub: port1 port 1 status 

0000 -> 0001 (C=1)

Quoted 4 lines
[  100.158377] aspeed_vhub 1e6a0000.usb-vhub: USB bus resume
[  100.158400] configfs-gadget gadget: resume
[  100.158415] aspeed_vhub 1e6a0000.usb-vhub: USB bus reset
[  100.301048] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

00/05/0002/0000/0000 [out] st=0

Quoted 1 line
[  100.301081] aspeed_vhub 1e6a0000.usb-vhub: USB status=0b100000 

speed=high

Quoted 1 line
[  100.301096] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SET_ADDRESS: 

Got address 2

Quoted 1 line
[  100.322061] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

80/06/0100/0000/0008 [in] st=0

Quoted 1 line
[  100.322090] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

GET_DESCRIPTOR(type:1)

Quoted 1 line
[  100.326625] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

80/06/0100/0000/0012 [in] st=0

Quoted 1 line
[  100.326656] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

GET_DESCRIPTOR(type:1)

Quoted 1 line
[  100.331359] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

80/06/0200/0000/0008 [in] st=0

Quoted 1 line
[  100.331392] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

GET_DESCRIPTOR(type:2)

Quoted 1 line
[  100.335194] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

80/06/0200/0000/0019 [in] st=0

Quoted 1 line
[  100.335221] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

GET_DESCRIPTOR(type:2)

Quoted 1 line
[  100.343939] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

80/06/0300/0000/0002 [in] st=0

Quoted 1 line
[  100.344272] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

80/06/0300/0000/0004 [in] st=0

Quoted 1 line
[  100.344647] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

00/09/0001/0000/0000 [out] st=0

Quoted 1 line
[  100.378145] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

a0/06/2900/0000/0002 [in] st=0

Quoted 1 line
[  100.378178] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

GetHubDescriptor(0)

Quoted 1 line
[  100.378195] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

GET_DESCRIPTOR(type:41)

Quoted 1 line
[  100.378522] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

a0/06/2900/0000/0009 [in] st=0

Quoted 1 line
[  100.378546] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

GetHubDescriptor(0)

Quoted 1 line
[  100.378560] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

GET_DESCRIPTOR(type:41)

Quoted 1 line
[  100.382665] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

23/03/0008/0001/0000 [out] st=0

Quoted 1 line
[  100.382697] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

SetPortFeature(1,8)

Quoted 1 line
[  100.382896] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

23/03/0008/0002/0000 [out] st=0

Quoted 1 line
[  100.382922] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

SetPortFeature(2,8)

Quoted 1 line
[  100.383148] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

23/03/0008/0003/0000 [out] st=0

Quoted 1 line
[  100.383173] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

SetPortFeature(3,8)

Quoted 1 line
[  100.383396] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

23/03/0008/0004/0000 [out] st=0

Quoted 1 line
[  100.383422] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

SetPortFeature(4,8)

Quoted 1 line
[  100.383643] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

23/03/0008/0005/0000 [out] st=0

Quoted 1 line
[  100.383668] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

SetPortFeature(5,8)

Quoted 1 line
[  100.403844] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

a0/00/0000/0000/0004 [in] st=0

Quoted 2 lines
[  100.403871] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetHubStatus
[  100.549225] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

a3/00/0000/0001/0004 [in] st=0

Quoted 2 lines
[  100.549257] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
[  100.549275] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0  port 

status=0101 change=0001

Quoted 1 line
[  100.549651] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

23/01/0010/0001/0000 [out] st=0

Quoted 1 line
[  100.549681] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

ClearPortFeature(1,16)

Quoted 1 line
[  100.664592] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

23/03/0004/0001/0000 [out] st=0

Quoted 1 line
[  100.664625] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

SetPortFeature(1,4)

Quoted 2 lines
[  100.664639] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 Port reset !
[  100.664658] aspeed_vhub 1e6a0000.usb-vhub: port1 port 1 status 

0001 -> 0011 (C=0)

Quoted 1 line
[  100.664672] aspeed_vhub 1e6a0000.usb-vhub: port1 Reset at unknown 

speed of disabled device, enabling.

Quoted 1 line
[  100.664689] aspeed_vhub 1e6a0000.usb-vhub: port1 port 1 status 

0011 -> 0403 (C=1)

Quoted 1 line
[  100.684840] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

a3/00/0000/0001/0004 [in] st=0

Quoted 2 lines
[  100.684867] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
[  100.684885] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0  port 

status=0503 change=0012

Quoted 1 line
[  100.685276] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

23/01/0011/0001/0000 [out] st=0

Quoted 1 line
[  100.685306] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

ClearPortFeature(1,17)

Quoted 1 line
[  100.685518] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

23/01/0014/0001/0000 [out] st=0

Quoted 1 line
[  100.685544] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 

ClearPortFeature(1,20)

Quoted 1 line
[  100.698539] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 

00/05/0003/0000/0000 [out] st=0

Quoted 1 line
[  100.698568] aspeed_vhub 1e6a0000.usb-vhub: port1 fist packet, 

captured speed 3

Quoted 1 line
[  100.698585] aspeed_vhub 1e6a0000.usb-vhub: port1 SET_ADDRESS: Got 

address 3

Quoted 1 line
[  100.714314] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

a3/00/0000/0001/0004 [in] st=0

Quoted 2 lines
[  100.714339] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
[  100.714354] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0  port 

status=0503 change=0000

Quoted 1 line
[  100.729165] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 

80/06/0100/0000/0008 [in] st=0

Quoted 1 line
[  100.729195] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding 

to gadget...

Quoted 1 line
[  100.729227] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver 

returned 0

Quoted 1 line
[  100.733627] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 

80/06/0100/0000/0012 [in] st=0

Quoted 1 line
[  100.733658] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding 

to gadget...

Quoted 1 line
[  100.733690] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver 

returned 0

Quoted 1 line
[  100.738363] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 

80/06/0200/0000/0008 [in] st=0

Quoted 1 line
[  100.738391] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding 

to gadget...

Quoted 1 line
[  100.738427] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver 

returned 0

Quoted 1 line
[  100.742195] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 

80/06/0200/0000/0029 [in] st=0

Quoted 1 line
[  100.742225] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding 

to gadget...

Quoted 1 line
[  100.742262] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver 

returned 0

Quoted 1 line
[  100.750944] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 

80/06/0300/0000/0002 [in] st=0

Quoted 1 line
[  100.750972] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding 

to gadget...

Quoted 1 line
[  100.751006] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver 

returned 0

Quoted 1 line
[  100.751400] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 

80/06/0300/0000/0004 [in] st=0

Quoted 1 line
[  100.751425] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding 

to gadget...

Quoted 1 line
[  100.751455] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver 

returned 0

Quoted 1 line
[  100.751777] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 

00/09/0001/0000/0000 [out] st=0

Quoted 1 line
[  100.751803] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding 

to gadget...

Quoted 2 lines
[  100.751821] configfs-gadget gadget: high-speed config #1: c
[  100.757460] aspeed_vhub 1e6a0000.usb-vhub: port1:EP1 Enabling 

[in] intr num 1 maxpacket=11

Quoted 1 line
[  100.757502] aspeed_vhub 1e6a0000.usb-vhub: port1:EP2 Enabling 

[out] intr num 2 maxpacket=11

Quoted 1 line
[  100.757549] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver 

returned 0

Quoted 1 line
[  100.820566] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 

80/08/0000/0000/0001 [in] st=0

Quoted 1 line
[  100.820594] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding 

to gadget...

Quoted 1 line
[  100.820621] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver 

returned 0

Quoted 1 line
[  100.821026] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 

a1/03/0000/0000/0001 [in] st=0

Quoted 1 line
[  100.821050] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding 

to gadget...

Quoted 1 line
[  100.821076] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver 

returned 0

Quoted 1 line
[  100.821397] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 

21/0b/0000/0000/0000 [out] st=0

Quoted 1 line
[  100.821422] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding 

to gadget...

Quoted 1 line
[  100.821451] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver 

returned 0

Quoted 1 line
[  100.821643] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 

21/09/0200/0000/0001 [out] st=0

Quoted 1 line
[  100.821666] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding 

to gadget...

Quoted 1 line
[  100.821685] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver 

returned -95

Quoted 3 lines
[  100.821697] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 stalling
[  100.821735] aspeed_vhub 1e6a0000.usb-vhub: status direction mismatch
[  100.913006] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 

21/09/0200/0000/0001 [out] st=0

Quoted 1 line
[  100.913034] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding 

to gadget...

Quoted 1 line
[  100.913056] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver 

returned -95

Quoted 2 lines
[  100.913067] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 stalling
[  100.946228] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

a3/00/0000/0001/0004 [in] st=0

Quoted 2 lines
[  100.946257] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
[  100.946274] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0  port 

status=0503 change=0000

Quoted 1 line
[  100.946645] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 

a0/00/0000/0000/0004 [in] st=0

Quoted 11 lines
[  100.946672] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetHubStatus
[  399.741059] aspeed_vhub 1e6a0000.usb-vhub: USB bus suspend
[  399.741081] configfs-gadget gadget: suspend

Best,
Xiuzhi

------------------ Original ------------------
From: "Benjamin Herrenschmidt";<[email protected]>; Send time: Thursday, Oct 25, 2018 6:42 AM
To: "Joel Stanley"<[email protected]>; "xiuzhi"<[email protected]>;
Cc: "a.filippov"<[email protected]>; "OpenBMC

Maillist"<[email protected]>;

Quoted 5 lines

Subject: Re: VHUB didn't work on AST2500

Quoted 2 lines · Joel Stanley
Quoted 1 line · xiuzhi

I am porting obmc-ikvm to my hardware platform. The host screen

can be seen by vncviewer , but the mouse and keyboard didn't work on AST2500

Quoted 1 line
Quoted 1 line
Quoted 1 line

. Only the keys ';' , 'Enter', '1','2','3','4' work. others

keyinput will deadlock the host screen .

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

The kernel error log:

[   99.326586] configfs-gadget gadget: high-speed config #1: c
[   99.403704] aspeed_vhub 1e6a0000.usb-vhub: status direction 

mismatch

Quoted 1 line
Quoted 1 line
Quoted 1 line
[   99.492831] aspeed_vhub 1e6a0000.usb-vhub: status direction 

mismatch

Quoted 19 lines
Quoted 6 lines
Quoted 4 lines

The kernel version is : video-dev5,
commit 2acbc35adcfe15971b701770e1105276a18da9f7

Who can give me some suggestions to debug it?

Ben, do you have any advice?

I need to know a bit more. What is used as a gadget driver on the BMC ?

I would probably need to reproduce with some added traces to the driver to figure out what's going on.

One first thing to try would be a run with CONFIG_USB_GADGET_DEBUG along with some indication of what actions happen corresponding to what part of the log (ie, press key 'a' etc...).

Cheers,
Ben.