Skip to contentSkip to conversation

perf report: Show inline stack

PATCH New Jin Yao 2 participants 11 messages Mar 25, 2017 – Mar 28, 2017 perf events

lore
Share & tools
lore

Jin Yao

author
#0 lore raw

v6 cover perf report: Show inline stack

v6:
Ravi reported a build error that was:

util/srcline.c: In function ‘addr2inlines’:
util/srcline.c:403:7: error: too few arguments to function ‘inline_list__append’
if (inline_list__append(filename, NULL, line_nr, node) != 0)

       ^
util/srcline.c:34:12: note: declared here
 static int inline_list__append(char *filename, char *funcname, int line_nr,
            ^
util/srcline.c: At top level:
util/srcline.c:60:13: error: ‘inline_list__reverse’ defined but not used [-Werror=unused-function]
 static void inline_list__reverse(struct inline_node *node)
             ^

cc1: all warnings being treated as errors
mv: cannot stat ‘util/.srcline.o.tmp’: No such file or directory

The error happens when BFD lib is not enabled in build environment. The patch series should be improved for better compatibility for this case.

So in v6, these patches are changed.

perf report: Find the inline stack for a given address perf report: Show inline stack for stdio mode perf report: Show inline stack for browser mode

Without BFD, the inlined function name is not supported even "-g function" set. It's only filename:line_nr printing.

Following patches are not changed.

perf report: Refactor common code in srcline.c
perf report: Create new inline option

v5: Update according to Milian Wolff's comments. It groups by address

    (then display file/ line), or by function (then display function name).

    For example:

    1. Show inlined function name
       perf report --stdio -g function --inline

       0.69%     0.00%  inline   ld-2.23.so           [.] dl_main
              |
              ---dl_main
                 |
                  --0.56%--_dl_relocate_object
                           _dl_relocate_object (inline)
                           elf_dynamic_do_Rela (inline)

     2. Show the file/line information
        perf report --stdio -g address --inline

        0.69%     0.00%  inline   ld-2.23.so           [.] _dl_start_user
              |
              ---_dl_start_user .:0
                 _dl_start rtld.c:307
                 /build/glibc-GKVZIf/glibc-2.23/elf/rtld.c:413 (inline)
                 _dl_sysdep_start dl-sysdep.c:250
                 |
                  --0.56%--dl_main rtld.c:2076

    2 patches are updated according to this change.
    perf report: Show inline stack in browser mode
    perf report: Show inline stack in stdio mode

    3 patches are not changed.
    perf report: Find the inline stack for a given address
    perf report: Refactor common code in srcline.c
    perf report: Create new inline option

v4: Remove the options "--inline-line" and "--inline-name". Just use
a new option "--inline" to print the inline function information. The policy is if the inline function name can be resolved then print the name in priority. If the name can't be resolved, then print the source line number.

For example:
perf report --stdio --inline

0.69% 0.00% inline ld-2.23.so [.] dl_main
|
---dl_main
|
--0.56%--_dl_relocate_object
| ---_dl_relocate_object (inline)
elf_dynamic_do_Rela (inline)

Following 3 patches are updated according to this change. perf report: Show inline stack in browser mode perf report: Show inline stack in stdio mode perf report: Create new inline option

Following are not changed.
perf report: Find the inline stack for a given address perf report: Refactor common code in srcline.c

v3: Iterate on RIPs of all callchain entries to check if the RIP is in
inline functions.

Reverse the order of the inliner printout if necessary.

Provide new options "--inline-line" / "--inline-name" to print inline function name or print inline function source line.

v2: Thanks so much for Arnaldo's comments!
The modifications are:

1. Divide v1 patch "perf report: Find the inline stack for a given address" into 2 patches:
a. perf report: Refactor common code in srcline.c b. perf report: Find the inline stack for a given address

Some function names are changed:
dso_name_get -> dso__name
ilist_apend -> inline_list__append
get_inline_node -> dso__parse_addr_inlines
free_inline_node -> inline_node__delete

2. Since the function name are changed, update following patches accordingly.
a. perf report: Show inline stack in stdio mode
b. perf report: Show inline stack in browser mode

3. Rebase to latest perf/core branch. This patch is impacted. a. perf report: Create a new option "--inline"

v1: Initial post

It would be useful for perf to support a mode to query the inline stack for callgraph addresses. This would simplify finding the right code in code that does a lot of inlining.

For example, the c code:

static inline void f3(void)

{
        int i;
        for (i = 0; i < 1000;) {

                if(i%2)
                        i++;
                else
                        i++;
        }
        printf("hello f3\n");   /* D */
}

/* < CALLCHAIN: f2 <- f1 > */
static inline void f2(void)

{
        int i;
        for (i = 0; i < 100; i++) {
                f3();   /* C */
        }
}

/* < CALLCHAIN: f1 <- main > */
static inline void f1(void)

{
        int i;
        for (i = 0; i < 100; i++) {
                f2();   /* B */
        }
}

/* < CALLCHAIN: main <- TOP > */
int main()

{
        struct timeval tv;
        time_t start, end;

        gettimeofday(&tv, NULL);
        start = end = tv.tv_sec;
        while((end - start) < 5) {
                f1();   /* A */
                gettimeofday(&tv, NULL);
                end = tv.tv_sec;
        }
        return 0;
}

The printed inline stack is:

0.05% test2 test2 [.] main

       |
       ---/home/perf-dev/lck-2867/test/test2.c:27 (inline)
          /home/perf-dev/lck-2867/test/test2.c:35 (inline)
          /home/perf-dev/lck-2867/test/test2.c:45 (inline)
          /home/perf-dev/lck-2867/test/test2.c:61 (inline)

I tag A/B/C/D in above c code to indicate the source line, actually the inline stack is equal to:

0.05% test2 test2 [.] main

       |
       ---D
          C
          B
          A

Jin Yao (5):
perf report: Refactor common code in srcline.c perf report: Find the inline stack for a given address perf report: Introduce --inline option
perf report: Show inline stack for stdio mode perf report: Show inline stack for browser mode

 tools/perf/Documentation/perf-report.txt |   4 +
 tools/perf/builtin-report.c              |   2 +
 tools/perf/ui/browsers/hists.c           | 180 +++++++++++++++++++++--
 tools/perf/ui/stdio/hist.c               |  85 ++++++++++-
 tools/perf/util/hist.c                   |   5 +
 tools/perf/util/sort.h                   |   1 +
 tools/perf/util/srcline.c                | 235 +++++++++++++++++++++++++++----
 tools/perf/util/symbol-elf.c             |   5 +
 tools/perf/util/symbol-minimal.c         |   7 +
 tools/perf/util/symbol.h                 |   5 +-
 tools/perf/util/util.h                   |  16 +++
 11 files changed, 507 insertions(+), 38 deletions(-)
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH v6 1/5 perf report: Refactor common code in srcline.c

Introduce dso__name() and filename_split() out of existing code because these codes will be used in several places in next patch.

For filename_split(), it may also solve a potential memory leak in existing code. In existing addr2line(),

        sep = strchr(filename, ':');
        if (sep) {
                *sep++ = '\0';
                *file = filename;
                *line_nr = strtoul(sep, NULL, 0);
                ret = 1;
        }

out:

        pclose(fp);
        return ret;

If sep is NULL, filename is not freed or returned via file.

---
 tools/perf/util/srcline.c | 68 +++++++++++++++++++++++++++++++----------------
 1 file changed, 45 insertions(+), 23 deletions(-)
tools/perf/util/srcline.c +45 -23
index b4db3f4..2953c9f 100644
@@ -12,6 +12,24 @@
 
 bool srcline_full_filename;
 
+static const char *dso__name(struct dso *dso)
+{
+	const char *dso_name;
+
+	if (dso->symsrc_filename)
+		dso_name = dso->symsrc_filename;
+	else
+		dso_name = dso->long_name;
+
+	if (dso_name[0] == '[')
+		return NULL;
+
+	if (!strncmp(dso_name, "/tmp/perf-", 10))
+		return NULL;
+
+	return dso_name;
+}
+
 #ifdef HAVE_LIBBFD_SUPPORT
 
 /*
@@ -207,6 +225,27 @@ void dso__free_a2l(struct dso *dso)
 
 #else /* HAVE_LIBBFD_SUPPORT */
 
+static int filename_split(char *filename, unsigned int *line_nr)
+{
+	char *sep;
+
+	sep = strchr(filename, '\n');
+	if (sep)
+		*sep = '\0';
+
+	if (!strcmp(filename, "??:0"))
+		return 0;
+
+	sep = strchr(filename, ':');
+	if (sep) {
+		*sep++ = '\0';
+		*line_nr = strtoul(sep, NULL, 0);
+		return 1;
+	}
+
+	return 0;
+}
+
 static int addr2line(const char *dso_name, u64 addr,
 		     char **file, unsigned int *line_nr,
 		     struct dso *dso __maybe_unused,
@@ -216,7 +255,6 @@ static int addr2line(const char *dso_name, u64 addr,
 	char cmd[PATH_MAX];
 	char *filename = NULL;
 	size_t len;
-	char *sep;
 	int ret = 0;
 
 	scnprintf(cmd, sizeof(cmd), "addr2line -e %s %016"PRIx64,
@@ -233,23 +271,14 @@ static int addr2line(const char *dso_name, u64 addr,
 		goto out;
 	}
 
-	sep = strchr(filename, '\n');
-	if (sep)
-		*sep = '\0';
-
-	if (!strcmp(filename, "??:0")) {
-		pr_debug("no debugging info in %s\n", dso_name);
+	ret = filename_split(filename, line_nr);
+	if (ret != 1) {
 		free(filename);
 		goto out;
 	}
 
-	sep = strchr(filename, ':');
-	if (sep) {
-		*sep++ = '\0';
-		*file = filename;
-		*line_nr = strtoul(sep, NULL, 0);
-		ret = 1;
-	}
+	*file = filename;
+
 out:
 	pclose(fp);
 	return ret;
@@ -278,15 +307,8 @@ char *__get_srcline(struct dso *dso, u64 addr, struct symbol *sym,
 	if (!dso->has_srcline)
 		goto out;
 
-	if (dso->symsrc_filename)
-		dso_name = dso->symsrc_filename;
-	else
-		dso_name = dso->long_name;
-
-	if (dso_name[0] == '[')
-		goto out;
-
-	if (!strncmp(dso_name, "/tmp/perf-", 10))
+	dso_name = dso__name(dso);
+	if (dso_name == NULL)
 		goto out;
 
 	if (!addr2line(dso_name, addr, &file, &line, dso, unwind_inlines))
Signature · 1 line
2.7.4
#2 lore raw

[tip:perf/core] perf report: Refactor common code in srcline.c

perf report: Refactor common code in srcline.c
Commit-ID:  5580338d0f207921bc1fef5b668cd564adcc3419
Gitweb:     http://git.kernel.org/tip/5580338d0f207921bc1fef5b668cd564adcc3419
Author:     Jin Yao <[email protected]>
AuthorDate: Sun, 26 Mar 2017 04:34:25 +0800
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 27 Mar 2017 11:59:23 -0300

perf report: Refactor common code in srcline.c

Introduce dso__name() and filename_split() out of existing code because these codes will be used in several places in next patch.

For filename_split(), it may also solve a potential memory leak in existing code. In existing addr2line(),

        sep = strchr(filename, ':');
        if (sep) {
                *sep++ = '\0';
                *file = filename;
                *line_nr = strtoul(sep, NULL, 0);
                ret = 1;
        }

out:

        pclose(fp);
        return ret;

If sep is NULL, filename is not freed or returned via file.

---
 tools/perf/util/srcline.c | 68 +++++++++++++++++++++++++++++++----------------
 1 file changed, 45 insertions(+), 23 deletions(-)
tools/perf/util/srcline.c +45 -23
index b4db3f4..2953c9f 100644
@@ -12,6 +12,24 @@
 
 bool srcline_full_filename;
 
+static const char *dso__name(struct dso *dso)
+{
+	const char *dso_name;
+
+	if (dso->symsrc_filename)
+		dso_name = dso->symsrc_filename;
+	else
+		dso_name = dso->long_name;
+
+	if (dso_name[0] == '[')
+		return NULL;
+
+	if (!strncmp(dso_name, "/tmp/perf-", 10))
+		return NULL;
+
+	return dso_name;
+}
+
 #ifdef HAVE_LIBBFD_SUPPORT
 
 /*
@@ -207,6 +225,27 @@ void dso__free_a2l(struct dso *dso)
 
 #else /* HAVE_LIBBFD_SUPPORT */
 
+static int filename_split(char *filename, unsigned int *line_nr)
+{
+	char *sep;
+
+	sep = strchr(filename, '\n');
+	if (sep)
+		*sep = '\0';
+
+	if (!strcmp(filename, "??:0"))
+		return 0;
+
+	sep = strchr(filename, ':');
+	if (sep) {
+		*sep++ = '\0';
+		*line_nr = strtoul(sep, NULL, 0);
+		return 1;
+	}
+
+	return 0;
+}
+
 static int addr2line(const char *dso_name, u64 addr,
 		     char **file, unsigned int *line_nr,
 		     struct dso *dso __maybe_unused,
@@ -216,7 +255,6 @@ static int addr2line(const char *dso_name, u64 addr,
 	char cmd[PATH_MAX];
 	char *filename = NULL;
 	size_t len;
-	char *sep;
 	int ret = 0;
 
 	scnprintf(cmd, sizeof(cmd), "addr2line -e %s %016"PRIx64,
@@ -233,23 +271,14 @@ static int addr2line(const char *dso_name, u64 addr,
 		goto out;
 	}
 
-	sep = strchr(filename, '\n');
-	if (sep)
-		*sep = '\0';
-
-	if (!strcmp(filename, "??:0")) {
-		pr_debug("no debugging info in %s\n", dso_name);
+	ret = filename_split(filename, line_nr);
+	if (ret != 1) {
 		free(filename);
 		goto out;
 	}
 
-	sep = strchr(filename, ':');
-	if (sep) {
-		*sep++ = '\0';
-		*file = filename;
-		*line_nr = strtoul(sep, NULL, 0);
-		ret = 1;
-	}
+	*file = filename;
+
 out:
 	pclose(fp);
 	return ret;
@@ -278,15 +307,8 @@ char *__get_srcline(struct dso *dso, u64 addr, struct symbol *sym,
 	if (!dso->has_srcline)
 		goto out;
 
-	if (dso->symsrc_filename)
-		dso_name = dso->symsrc_filename;
-	else
-		dso_name = dso->long_name;
-
-	if (dso_name[0] == '[')
-		goto out;
-
-	if (!strncmp(dso_name, "/tmp/perf-", 10))
+	dso_name = dso__name(dso);
+	if (dso_name == NULL)
 		goto out;
 
 	if (!addr2line(dso_name, addr, &file, &line, dso, unwind_inlines))
author
#3 lore raw

PATCH v6 2/5 perf report: Find the inline stack for a given address

In reply to Jin Yao

It would be useful for perf to support a mode to query the inline stack for a given callgraph address. This would simplify finding the right code in code that does a lot of inlining.

The srcline.c has contained the code which supports to translate the address to filename:line_nr. This patch just extends the function to let it support getting the inline stacks.

It introduces the inline_list which will store the inline function result (filename:line_nr and funcname).

If BFD lib is not supported, the result is only filename:line_nr.

---
 tools/perf/util/srcline.c        | 167 +++++++++++++++++++++++++++++++++++++--
 tools/perf/util/symbol-elf.c     |   5 ++
 tools/perf/util/symbol-minimal.c |   7 ++
 tools/perf/util/symbol.h         |   2 +
 tools/perf/util/util.h           |  16 ++++
 5 files changed, 192 insertions(+), 5 deletions(-)
tools/perf/util/srcline.c +162 -5
index 2953c9f..3ce28f7 100644
@@ -7,6 +7,7 @@
 #include "util/dso.h"
 #include "util/util.h"
 #include "util/debug.h"
+#include "util/callchain.h"
 
 #include "symbol.h"
 
@@ -30,6 +31,34 @@ static const char *dso__name(struct dso *dso)
 	return dso_name;
 }
 
+static int inline_list__append(char *filename, char *funcname, int line_nr,
+			       struct inline_node *node, struct dso *dso)
+{
+	struct inline_list *ilist;
+	char *demangled;
+
+	ilist = zalloc(sizeof(*ilist));
+	if (ilist == NULL)
+		return -1;
+
+	ilist->filename = filename;
+	ilist->line_nr = line_nr;
+
+	if (dso != NULL) {
+		demangled = dso__demangle_sym(dso, 0, funcname);
+		if (demangled == NULL) {
+			ilist->funcname = funcname;
+		} else {
+			ilist->funcname = demangled;
+			free(funcname);
+		}
+	}
+
+	list_add_tail(&ilist->list, &node->val);
+
+	return 0;
+}
+
 #ifdef HAVE_LIBBFD_SUPPORT
 
 /*
@@ -169,9 +198,17 @@ static void addr2line_cleanup(struct a2l_data *a2l)
 
 #define MAX_INLINE_NEST 1024
 
+static void inline_list__reverse(struct inline_node *node)
+{
+	struct inline_list *ilist, *n;
+
+	list_for_each_entry_safe_reverse(ilist, n, &node->val, list)
+		list_move_tail(&ilist->list, &node->val);
+}
+
 static int addr2line(const char *dso_name, u64 addr,
 		     char **file, unsigned int *line, struct dso *dso,
-		     bool unwind_inlines)
+		     bool unwind_inlines, struct inline_node *node)
 {
 	int ret = 0;
 	struct a2l_data *a2l = dso->a2l;
@@ -196,8 +233,21 @@ static int addr2line(const char *dso_name, u64 addr,
 
 		while (bfd_find_inliner_info(a2l->abfd, &a2l->filename,
 					     &a2l->funcname, &a2l->line) &&
-		       cnt++ < MAX_INLINE_NEST)
-			;
+		       cnt++ < MAX_INLINE_NEST) {
+
+			if (node != NULL) {
+				if (inline_list__append(strdup(a2l->filename),
+							strdup(a2l->funcname),
+							a2l->line, node,
+							dso) != 0)
+					return 0;
+			}
+		}
+
+		if ((node != NULL) &&
+		    (callchain_param.order != ORDER_CALLEE)) {
+			inline_list__reverse(node);
+		}
 	}
 
 	if (a2l->found && a2l->filename) {
@@ -223,6 +273,35 @@ void dso__free_a2l(struct dso *dso)
 	dso->a2l = NULL;
 }
 
+static struct inline_node *addr2inlines(const char *dso_name, u64 addr,
+	struct dso *dso)
+{
+	char *file = NULL;
+	unsigned int line = 0;
+	struct inline_node *node;
+
+	node = zalloc(sizeof(*node));
+	if (node == NULL) {
+		perror("not enough memory for the inline node");
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&node->val);
+	node->addr = addr;
+
+	if (!addr2line(dso_name, addr, &file, &line, dso, TRUE, node))
+		goto out_free_inline_node;
+
+	if (list_empty(&node->val))
+		goto out_free_inline_node;
+
+	return node;
+
+out_free_inline_node:
+	inline_node__delete(node);
+	return NULL;
+}
+
 #else /* HAVE_LIBBFD_SUPPORT */
 
 static int filename_split(char *filename, unsigned int *line_nr)
@@ -249,7 +328,8 @@ static int filename_split(char *filename, unsigned int *line_nr)
 static int addr2line(const char *dso_name, u64 addr,
 		     char **file, unsigned int *line_nr,
 		     struct dso *dso __maybe_unused,
-		     bool unwind_inlines __maybe_unused)
+		     bool unwind_inlines __maybe_unused,
+		     struct inline_node *node __maybe_unused)
 {
 	FILE *fp;
 	char cmd[PATH_MAX];
@@ -288,6 +368,58 @@ void dso__free_a2l(struct dso *dso __maybe_unused)
 {
 }
 
+static struct inline_node *addr2inlines(const char *dso_name, u64 addr,
+	struct dso *dso __maybe_unused)
+{
+	FILE *fp;
+	char cmd[PATH_MAX];
+	struct inline_node *node;
+	char *filename = NULL;
+	size_t len;
+	unsigned int line_nr = 0;
+
+	scnprintf(cmd, sizeof(cmd), "addr2line -e %s -i %016"PRIx64,
+		  dso_name, addr);
+
+	fp = popen(cmd, "r");
+	if (fp == NULL) {
+		pr_err("popen failed for %s\n", dso_name);
+		return NULL;
+	}
+
+	node = zalloc(sizeof(*node));
+	if (node == NULL) {
+		perror("not enough memory for the inline node");
+		goto out;
+	}
+
+	INIT_LIST_HEAD(&node->val);
+	node->addr = addr;
+
+	while (getline(&filename, &len, fp) != -1) {
+		if (filename_split(filename, &line_nr) != 1) {
+			free(filename);
+			goto out;
+		}
+
+		if (inline_list__append(filename, NULL, line_nr, node,
+					NULL) != 0)
+			goto out;
+
+		filename = NULL;
+	}
+
+out:
+	pclose(fp);
+
+	if (list_empty(&node->val)) {
+		inline_node__delete(node);
+		return NULL;
+	}
+
+	return node;
+}
+
 #endif /* HAVE_LIBBFD_SUPPORT */
 
 /*
@@ -311,7 +443,7 @@ char *__get_srcline(struct dso *dso, u64 addr, struct symbol *sym,
 	if (dso_name == NULL)
 		goto out;
 
-	if (!addr2line(dso_name, addr, &file, &line, dso, unwind_inlines))
+	if (!addr2line(dso_name, addr, &file, &line, dso, unwind_inlines, NULL))
 		goto out;
 
 	if (asprintf(&srcline, "%s:%u",
@@ -351,3 +483,28 @@ char *get_srcline(struct dso *dso, u64 addr, struct symbol *sym,
 {
 	return __get_srcline(dso, addr, sym, show_sym, false);
 }
+
+struct inline_node *dso__parse_addr_inlines(struct dso *dso, u64 addr)
+{
+	const char *dso_name;
+
+	dso_name = dso__name(dso);
+	if (dso_name == NULL)
+		return NULL;
+
+	return addr2inlines(dso_name, addr, dso);
+}
+
+void inline_node__delete(struct inline_node *node)
+{
+	struct inline_list *ilist, *tmp;
+
+	list_for_each_entry_safe(ilist, tmp, &node->val, list) {
+		list_del_init(&ilist->list);
+		zfree(&ilist->filename);
+		zfree(&ilist->funcname);
+		free(ilist);
+	}
+
+	free(node);
+}
tools/perf/util/symbol-elf.c +5 -0
index 0e660db..d1a40bb 100644
@@ -390,6 +390,11 @@ int dso__synthesize_plt_symbols(struct dso *dso, struct symsrc *ss, struct map *
 	return 0;
 }
 
+char *dso__demangle_sym(struct dso *dso, int kmodule, char *elf_name)
+{
+	return demangle_sym(dso, kmodule, elf_name);
+}
+
 /*
  * Align offset to 4 bytes as needed for note name and descriptor data.
  */
tools/perf/util/symbol-minimal.c +7 -0
index 11cdde9..870ef0f 100644
@@ -373,3 +373,10 @@ int kcore_copy(const char *from_dir __maybe_unused,
 void symbol__elf_init(void)
 {
 }
+
+char *dso__demangle_sym(struct dso *dso __maybe_unused,
+			int kmodule __maybe_unused,
+			char *elf_name __maybe_unused)
+{
+	return NULL;
+}
tools/perf/util/symbol.h +2 -0
index 9222c7e..e36213c 100644
@@ -305,6 +305,8 @@ int dso__load_sym(struct dso *dso, struct map *map, struct symsrc *syms_ss,
 int dso__synthesize_plt_symbols(struct dso *dso, struct symsrc *ss,
 				struct map *map);
 
+char *dso__demangle_sym(struct dso *dso, int kmodule, char *elf_name);
+
 void __symbols__insert(struct rb_root *symbols, struct symbol *sym, bool kernel);
 void symbols__insert(struct rb_root *symbols, struct symbol *sym);
 void symbols__fixup_duplicate(struct rb_root *symbols);
tools/perf/util/util.h +16 -0
index b2cfa47..cc0700d 100644
@@ -364,4 +364,20 @@ int is_printable_array(char *p, unsigned int len);
 int timestamp__scnprintf_usec(u64 timestamp, char *buf, size_t sz);
 
 int unit_number__scnprintf(char *buf, size_t size, u64 n);
+
+struct inline_list {
+	char			*filename;
+	char			*funcname;
+	unsigned int		line_nr;
+	struct list_head	list;
+};
+
+struct inline_node {
+	u64			addr;
+	struct list_head	val;
+};
+
+struct inline_node *dso__parse_addr_inlines(struct dso *dso, u64 addr);
+void inline_node__delete(struct inline_node *node);
+
 #endif /* GIT_COMPAT_UTIL_H */
Signature · 1 line
2.7.4
#4 lore raw

[tip:perf/core] perf report: Find the inline stack for a given address

perf report: Find the inline stack for a given address
Commit-ID:  a64489c56c307bf0955f0489158c5ecf6aa10fe2
Gitweb:     http://git.kernel.org/tip/a64489c56c307bf0955f0489158c5ecf6aa10fe2
Author:     Jin Yao <[email protected]>
AuthorDate: Sun, 26 Mar 2017 04:34:26 +0800
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 27 Mar 2017 12:00:38 -0300

perf report: Find the inline stack for a given address

It would be useful for perf to support a mode to query the inline stack for a given callgraph address. This would simplify finding the right code in code that does a lot of inlining.

The srcline.c has contained the code which supports to translate the address to filename:line_nr. This patch just extends the function to let it support getting the inline stacks.

It introduces the inline_list which will store the inline function result (filename:line_nr and funcname).

If BFD lib is not supported, the result is only filename:line_nr.

---
 tools/perf/util/srcline.c        | 167 +++++++++++++++++++++++++++++++++++++--
 tools/perf/util/symbol-elf.c     |   5 ++
 tools/perf/util/symbol-minimal.c |   7 ++
 tools/perf/util/symbol.h         |   2 +
 tools/perf/util/util.h           |  16 ++++
 5 files changed, 192 insertions(+), 5 deletions(-)
tools/perf/util/srcline.c +162 -5
index 2953c9f..3ce28f7 100644
@@ -7,6 +7,7 @@
 #include "util/dso.h"
 #include "util/util.h"
 #include "util/debug.h"
+#include "util/callchain.h"
 
 #include "symbol.h"
 
@@ -30,6 +31,34 @@ static const char *dso__name(struct dso *dso)
 	return dso_name;
 }
 
+static int inline_list__append(char *filename, char *funcname, int line_nr,
+			       struct inline_node *node, struct dso *dso)
+{
+	struct inline_list *ilist;
+	char *demangled;
+
+	ilist = zalloc(sizeof(*ilist));
+	if (ilist == NULL)
+		return -1;
+
+	ilist->filename = filename;
+	ilist->line_nr = line_nr;
+
+	if (dso != NULL) {
+		demangled = dso__demangle_sym(dso, 0, funcname);
+		if (demangled == NULL) {
+			ilist->funcname = funcname;
+		} else {
+			ilist->funcname = demangled;
+			free(funcname);
+		}
+	}
+
+	list_add_tail(&ilist->list, &node->val);
+
+	return 0;
+}
+
 #ifdef HAVE_LIBBFD_SUPPORT
 
 /*
@@ -169,9 +198,17 @@ static void addr2line_cleanup(struct a2l_data *a2l)
 
 #define MAX_INLINE_NEST 1024
 
+static void inline_list__reverse(struct inline_node *node)
+{
+	struct inline_list *ilist, *n;
+
+	list_for_each_entry_safe_reverse(ilist, n, &node->val, list)
+		list_move_tail(&ilist->list, &node->val);
+}
+
 static int addr2line(const char *dso_name, u64 addr,
 		     char **file, unsigned int *line, struct dso *dso,
-		     bool unwind_inlines)
+		     bool unwind_inlines, struct inline_node *node)
 {
 	int ret = 0;
 	struct a2l_data *a2l = dso->a2l;
@@ -196,8 +233,21 @@ static int addr2line(const char *dso_name, u64 addr,
 
 		while (bfd_find_inliner_info(a2l->abfd, &a2l->filename,
 					     &a2l->funcname, &a2l->line) &&
-		       cnt++ < MAX_INLINE_NEST)
-			;
+		       cnt++ < MAX_INLINE_NEST) {
+
+			if (node != NULL) {
+				if (inline_list__append(strdup(a2l->filename),
+							strdup(a2l->funcname),
+							a2l->line, node,
+							dso) != 0)
+					return 0;
+			}
+		}
+
+		if ((node != NULL) &&
+		    (callchain_param.order != ORDER_CALLEE)) {
+			inline_list__reverse(node);
+		}
 	}
 
 	if (a2l->found && a2l->filename) {
@@ -223,6 +273,35 @@ void dso__free_a2l(struct dso *dso)
 	dso->a2l = NULL;
 }
 
+static struct inline_node *addr2inlines(const char *dso_name, u64 addr,
+	struct dso *dso)
+{
+	char *file = NULL;
+	unsigned int line = 0;
+	struct inline_node *node;
+
+	node = zalloc(sizeof(*node));
+	if (node == NULL) {
+		perror("not enough memory for the inline node");
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&node->val);
+	node->addr = addr;
+
+	if (!addr2line(dso_name, addr, &file, &line, dso, TRUE, node))
+		goto out_free_inline_node;
+
+	if (list_empty(&node->val))
+		goto out_free_inline_node;
+
+	return node;
+
+out_free_inline_node:
+	inline_node__delete(node);
+	return NULL;
+}
+
 #else /* HAVE_LIBBFD_SUPPORT */
 
 static int filename_split(char *filename, unsigned int *line_nr)
@@ -249,7 +328,8 @@ static int filename_split(char *filename, unsigned int *line_nr)
 static int addr2line(const char *dso_name, u64 addr,
 		     char **file, unsigned int *line_nr,
 		     struct dso *dso __maybe_unused,
-		     bool unwind_inlines __maybe_unused)
+		     bool unwind_inlines __maybe_unused,
+		     struct inline_node *node __maybe_unused)
 {
 	FILE *fp;
 	char cmd[PATH_MAX];
@@ -288,6 +368,58 @@ void dso__free_a2l(struct dso *dso __maybe_unused)
 {
 }
 
+static struct inline_node *addr2inlines(const char *dso_name, u64 addr,
+	struct dso *dso __maybe_unused)
+{
+	FILE *fp;
+	char cmd[PATH_MAX];
+	struct inline_node *node;
+	char *filename = NULL;
+	size_t len;
+	unsigned int line_nr = 0;
+
+	scnprintf(cmd, sizeof(cmd), "addr2line -e %s -i %016"PRIx64,
+		  dso_name, addr);
+
+	fp = popen(cmd, "r");
+	if (fp == NULL) {
+		pr_err("popen failed for %s\n", dso_name);
+		return NULL;
+	}
+
+	node = zalloc(sizeof(*node));
+	if (node == NULL) {
+		perror("not enough memory for the inline node");
+		goto out;
+	}
+
+	INIT_LIST_HEAD(&node->val);
+	node->addr = addr;
+
+	while (getline(&filename, &len, fp) != -1) {
+		if (filename_split(filename, &line_nr) != 1) {
+			free(filename);
+			goto out;
+		}
+
+		if (inline_list__append(filename, NULL, line_nr, node,
+					NULL) != 0)
+			goto out;
+
+		filename = NULL;
+	}
+
+out:
+	pclose(fp);
+
+	if (list_empty(&node->val)) {
+		inline_node__delete(node);
+		return NULL;
+	}
+
+	return node;
+}
+
 #endif /* HAVE_LIBBFD_SUPPORT */
 
 /*
@@ -311,7 +443,7 @@ char *__get_srcline(struct dso *dso, u64 addr, struct symbol *sym,
 	if (dso_name == NULL)
 		goto out;
 
-	if (!addr2line(dso_name, addr, &file, &line, dso, unwind_inlines))
+	if (!addr2line(dso_name, addr, &file, &line, dso, unwind_inlines, NULL))
 		goto out;
 
 	if (asprintf(&srcline, "%s:%u",
@@ -351,3 +483,28 @@ char *get_srcline(struct dso *dso, u64 addr, struct symbol *sym,
 {
 	return __get_srcline(dso, addr, sym, show_sym, false);
 }
+
+struct inline_node *dso__parse_addr_inlines(struct dso *dso, u64 addr)
+{
+	const char *dso_name;
+
+	dso_name = dso__name(dso);
+	if (dso_name == NULL)
+		return NULL;
+
+	return addr2inlines(dso_name, addr, dso);
+}
+
+void inline_node__delete(struct inline_node *node)
+{
+	struct inline_list *ilist, *tmp;
+
+	list_for_each_entry_safe(ilist, tmp, &node->val, list) {
+		list_del_init(&ilist->list);
+		zfree(&ilist->filename);
+		zfree(&ilist->funcname);
+		free(ilist);
+	}
+
+	free(node);
+}
tools/perf/util/symbol-elf.c +5 -0
index 0e660db..d1a40bb 100644
@@ -390,6 +390,11 @@ out_elf_end:
 	return 0;
 }
 
+char *dso__demangle_sym(struct dso *dso, int kmodule, char *elf_name)
+{
+	return demangle_sym(dso, kmodule, elf_name);
+}
+
 /*
  * Align offset to 4 bytes as needed for note name and descriptor data.
  */
tools/perf/util/symbol-minimal.c +7 -0
index 11cdde9..870ef0f 100644
@@ -373,3 +373,10 @@ int kcore_copy(const char *from_dir __maybe_unused,
 void symbol__elf_init(void)
 {
 }
+
+char *dso__demangle_sym(struct dso *dso __maybe_unused,
+			int kmodule __maybe_unused,
+			char *elf_name __maybe_unused)
+{
+	return NULL;
+}
tools/perf/util/symbol.h +2 -0
index 9222c7e..e36213c 100644
@@ -305,6 +305,8 @@ int dso__load_sym(struct dso *dso, struct map *map, struct symsrc *syms_ss,
 int dso__synthesize_plt_symbols(struct dso *dso, struct symsrc *ss,
 				struct map *map);
 
+char *dso__demangle_sym(struct dso *dso, int kmodule, char *elf_name);
+
 void __symbols__insert(struct rb_root *symbols, struct symbol *sym, bool kernel);
 void symbols__insert(struct rb_root *symbols, struct symbol *sym);
 void symbols__fixup_duplicate(struct rb_root *symbols);
tools/perf/util/util.h +16 -0
index b2cfa47..cc0700d 100644
@@ -364,4 +364,20 @@ int is_printable_array(char *p, unsigned int len);
 int timestamp__scnprintf_usec(u64 timestamp, char *buf, size_t sz);
 
 int unit_number__scnprintf(char *buf, size_t size, u64 n);
+
+struct inline_list {
+	char			*filename;
+	char			*funcname;
+	unsigned int		line_nr;
+	struct list_head	list;
+};
+
+struct inline_node {
+	u64			addr;
+	struct list_head	val;
+};
+
+struct inline_node *dso__parse_addr_inlines(struct dso *dso, u64 addr);
+void inline_node__delete(struct inline_node *node);
+
 #endif /* GIT_COMPAT_UTIL_H */
author
#5 lore raw

PATCH v6 3/5 perf report: Introduce --inline option

In reply to Jin Yao

It takes some time to look for inline stack for callgraph addresses. So it provides new option "--inline" to let user decide if enable this feature.

--inline:

If a callgraph address belongs to an inlined function, the inline stack will be printed. Each entry is the inline function name or file/line.

---
 tools/perf/Documentation/perf-report.txt | 4 ++++
 tools/perf/builtin-report.c              | 2 ++
 tools/perf/util/symbol.h                 | 3 ++-
 3 files changed, 8 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-report.txt +4 -0
index e9a61f5..248bba4 100644
@@ -430,6 +430,10 @@ include::itrace.txt[]
 --hierarchy::
 	Enable hierarchical output.
 
+--inline::
+	If a callgraph address belongs to an inlined function, the inline stack
+	will be printed. Each entry is function name or file/line.
+
 include::callchain-overhead-calculation.txt[]
 
 SEE ALSO
tools/perf/builtin-report.c +2 -0
index 5ab8117..26bc169 100644
@@ -845,6 +845,8 @@ int cmd_report(int argc, const char **argv, const char *prefix __maybe_unused)
 			     stdio__config_color, "always"),
 	OPT_STRING(0, "time", &report.time_str, "str",
 		   "Time span of interest (start,stop)"),
+	OPT_BOOLEAN(0, "inline", &symbol_conf.inline_name,
+		    "Show inline function"),
 	OPT_END()
 	};
 	struct perf_data_file file = {
tools/perf/util/symbol.h +2 -1
index e36213c..5245d2f 100644
@@ -118,7 +118,8 @@ struct symbol_conf {
 			show_ref_callgraph,
 			hide_unresolved,
 			raw_trace,
-			report_hierarchy;
+			report_hierarchy,
+			inline_name;
 	const char	*vmlinux_name,
 			*kallsyms_name,
 			*source_prefix,
Signature · 1 line
2.7.4
#6 lore raw

[tip:perf/core] perf report: Introduce --inline option

perf report: Introduce --inline option
Commit-ID:  f3a60646cc3e0524d8f1083db1da7532a1590b40
Gitweb:     http://git.kernel.org/tip/f3a60646cc3e0524d8f1083db1da7532a1590b40
Author:     Jin Yao <[email protected]>
AuthorDate: Sun, 26 Mar 2017 04:34:27 +0800
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 27 Mar 2017 12:01:46 -0300

perf report: Introduce --inline option

It takes some time to look for inline stack for callgraph addresses. So it provides new option "--inline" to let user decide if enable this feature.

--inline:

If a callgraph address belongs to an inlined function, the inline stack will be printed. Each entry is the inline function name or file/line.

---
 tools/perf/Documentation/perf-report.txt | 4 ++++
 tools/perf/builtin-report.c              | 2 ++
 tools/perf/util/symbol.h                 | 3 ++-
 3 files changed, 8 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-report.txt +4 -0
index e9a61f5..248bba4 100644
@@ -430,6 +430,10 @@ include::itrace.txt[]
 --hierarchy::
 	Enable hierarchical output.
 
+--inline::
+	If a callgraph address belongs to an inlined function, the inline stack
+	will be printed. Each entry is function name or file/line.
+
 include::callchain-overhead-calculation.txt[]
 
 SEE ALSO
tools/perf/builtin-report.c +2 -0
index 3c8885a..c18158b 100644
@@ -845,6 +845,8 @@ int cmd_report(int argc, const char **argv)
 			     stdio__config_color, "always"),
 	OPT_STRING(0, "time", &report.time_str, "str",
 		   "Time span of interest (start,stop)"),
+	OPT_BOOLEAN(0, "inline", &symbol_conf.inline_name,
+		    "Show inline function"),
 	OPT_END()
 	};
 	struct perf_data_file file = {
tools/perf/util/symbol.h +2 -1
index e36213c..5245d2f 100644
@@ -118,7 +118,8 @@ struct symbol_conf {
 			show_ref_callgraph,
 			hide_unresolved,
 			raw_trace,
-			report_hierarchy;
+			report_hierarchy,
+			inline_name;
 	const char	*vmlinux_name,
 			*kallsyms_name,
 			*source_prefix,
author
#7 lore raw

PATCH v6 4/5 perf report: Show inline stack for stdio mode

In reply to Jin Yao

If the address belongs to an inlined function, the source information back to the first non-inlined function will be printed.

For example:

1. Show inlined function name
perf report --stdio -g function --inline

     0.69%     0.00%  inline   ld-2.23.so           [.] dl_main
            |
            ---dl_main
               |
                --0.56%--_dl_relocate_object
                          _dl_relocate_object (inline)
                          elf_dynamic_do_Rela (inline)

2. Show the file/line information
perf report --stdio -g address --inline

     0.69%     0.00%  inline   ld-2.23.so           [.] _dl_start_user
            |
            ---_dl_start_user .:0
               _dl_start rtld.c:307
               /build/glibc-GKVZIf/glibc-2.23/elf/rtld.c:413 (inline)
               _dl_sysdep_start dl-sysdep.c:250
               |
                --0.56%--dl_main rtld.c:2076

Committer tests:

  # perf record --call-graph dwarf ~/bin/perf stat usleep 1

Performance counter stats for 'usleep 1':

          0.443020      task-clock (msec)         #    0.449 CPUs utilized
                 1      context-switches          #    0.002 M/sec
                 0      cpu-migrations            #    0.000 K/sec
                52      page-faults               #    0.117 M/sec
         1,049,423      cycles                    #    2.369 GHz
           801,456      instructions              #    0.76  insn per cycle
           155,609      branches                  #  351.246 M/sec
             7,026      branch-misses             #    4.52% of all branches
       0.000987570 seconds time elapsed

[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.553 MB perf.data (66 samples) ]

  # perf report --stdio --inline fs__get_mountpoint
  <SNIP>
     1.73%     0.00%  perf     perf           [.] fs__get_mountpoint
            |
            ---fs__get_mountpoint
               fs__get_mountpoint (inline)
               fs__check_mounts (inline)
               __statfs
               entry_SYSCALL_64
               sys_statfs
               SYSC_statfs
               user_statfs
               user_path_at_empty
               filename_lookup
               path_lookupat
               link_path_walk
               inode_permission
               __inode_permission
               kernfs_iop_permission
               kernfs_refresh_inode
               security_inode_notifysecctx
               selinux_inode_notifysecctx
               selinux_inode_setsecurity
               security_context_to_sid
               security_context_to_sid_core
               string_to_context_struct
               symcmp
---
 tools/perf/ui/stdio/hist.c | 85 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 84 insertions(+), 1 deletion(-)
tools/perf/ui/stdio/hist.c +84 -1
index 668f4ae..6128f48 100644
@@ -17,6 +17,66 @@ static size_t callchain__fprintf_left_margin(FILE *fp, int left_margin)
 	return ret;
 }
 
+static size_t inline__fprintf(struct map *map, u64 ip, int left_margin,
+			      int depth, int depth_mask, FILE *fp)
+{
+	struct dso *dso;
+	struct inline_node *node;
+	struct inline_list *ilist;
+	int ret = 0, i;
+
+	if (map == NULL)
+		return 0;
+
+	dso = map->dso;
+	if (dso == NULL)
+		return 0;
+
+	if (dso->kernel != DSO_TYPE_USER)
+		return 0;
+
+	node = dso__parse_addr_inlines(dso,
+				       map__rip_2objdump(map, ip));
+	if (node == NULL)
+		return 0;
+
+	list_for_each_entry(ilist, &node->val, list) {
+		if ((ilist->filename != NULL) || (ilist->funcname != NULL)) {
+			ret += callchain__fprintf_left_margin(fp, left_margin);
+
+			for (i = 0; i < depth; i++) {
+				if (depth_mask & (1 << i))
+					ret += fprintf(fp, "|");
+				else
+					ret += fprintf(fp, " ");
+				ret += fprintf(fp, "          ");
+			}
+
+			if (callchain_param.key == CCKEY_ADDRESS) {
+				if (ilist->filename != NULL)
+					ret += fprintf(fp, "%s:%d (inline)",
+						       ilist->filename,
+						       ilist->line_nr);
+				else
+					ret += fprintf(fp, "??");
+			} else if (ilist->funcname != NULL)
+				ret += fprintf(fp, "%s (inline)",
+					       ilist->funcname);
+			else if (ilist->filename != NULL)
+				ret += fprintf(fp, "%s:%d (inline)",
+					       ilist->filename,
+					       ilist->line_nr);
+			else
+				ret += fprintf(fp, "??");
+
+			ret += fprintf(fp, "\n");
+		}
+	}
+
+	inline_node__delete(node);
+	return ret;
+}
+
 static size_t ipchain__fprintf_graph_line(FILE *fp, int depth, int depth_mask,
 					  int left_margin)
 {
@@ -78,6 +138,10 @@ static size_t ipchain__fprintf_graph(FILE *fp, struct callchain_node *node,
 	fputs(str, fp);
 	fputc('\n', fp);
 	free(alloc_str);
+
+	if (symbol_conf.inline_name)
+		ret += inline__fprintf(chain->ms.map, chain->ip,
+				       left_margin, depth, depth_mask, fp);
 	return ret;
 }
 
@@ -229,6 +293,7 @@ static size_t callchain__fprintf_graph(FILE *fp, struct rb_root *root,
 			if (!i++ && field_order == NULL &&
 			    sort_order && !prefixcmp(sort_order, "sym"))
 				continue;
+
 			if (!printed) {
 				ret += callchain__fprintf_left_margin(fp, left_margin);
 				ret += fprintf(fp, "|\n");
@@ -251,6 +316,13 @@ static size_t callchain__fprintf_graph(FILE *fp, struct rb_root *root,
 
 			if (++entries_printed == callchain_param.print_limit)
 				break;
+
+			if (symbol_conf.inline_name)
+				ret += inline__fprintf(chain->ms.map,
+						       chain->ip,
+						       left_margin,
+						       0, 0,
+						       fp);
 		}
 		root = &cnode->rb_root;
 	}
@@ -529,6 +601,8 @@ static int hist_entry__fprintf(struct hist_entry *he, size_t size,
 			       bool use_callchain)
 {
 	int ret;
+	int callchain_ret = 0;
+	int inline_ret = 0;
 	struct perf_hpp hpp = {
 		.buf		= bf,
 		.size		= size,
@@ -547,7 +621,16 @@ static int hist_entry__fprintf(struct hist_entry *he, size_t size,
 	ret = fprintf(fp, "%s\n", bf);
 
 	if (use_callchain)
-		ret += hist_entry_callchain__fprintf(he, total_period, 0, fp);
+		callchain_ret = hist_entry_callchain__fprintf(he, total_period,
+							      0, fp);
+
+	if (callchain_ret == 0 && symbol_conf.inline_name) {
+		inline_ret = inline__fprintf(he->ms.map, he->ip, 0, 0, 0, fp);
+		ret += inline_ret;
+		if (inline_ret > 0)
+			ret += fprintf(fp, "\n");
+	} else
+		ret += callchain_ret;
 
 	return ret;
 }
Signature · 1 line
2.7.4
#8 lore raw

[tip:perf/core] perf report: Show inline stack for stdio mode

perf report: Show inline stack for stdio mode
Commit-ID:  0db64dd060f7fd77921be8f10fa9f7a5f49a3a43
Gitweb:     http://git.kernel.org/tip/0db64dd060f7fd77921be8f10fa9f7a5f49a3a43
Author:     Jin Yao <[email protected]>
AuthorDate: Sun, 26 Mar 2017 04:34:28 +0800
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 27 Mar 2017 12:02:22 -0300

perf report: Show inline stack for stdio mode

If the address belongs to an inlined function, the source information back to the first non-inlined function will be printed.

For example:

1. Show inlined function name
perf report --stdio -g function --inline

     0.69%     0.00%  inline   ld-2.23.so           [.] dl_main
            |
            ---dl_main
               |
                --0.56%--_dl_relocate_object
                          _dl_relocate_object (inline)
                          elf_dynamic_do_Rela (inline)

2. Show the file/line information
perf report --stdio -g address --inline

     0.69%     0.00%  inline   ld-2.23.so           [.] _dl_start_user
            |
            ---_dl_start_user .:0
               _dl_start rtld.c:307
               /build/glibc-GKVZIf/glibc-2.23/elf/rtld.c:413 (inline)
               _dl_sysdep_start dl-sysdep.c:250
               |
                --0.56%--dl_main rtld.c:2076

Committer tests:

  # perf record --call-graph dwarf ~/bin/perf stat usleep 1

Performance counter stats for 'usleep 1':

          0.443020      task-clock (msec)         #    0.449 CPUs utilized
                 1      context-switches          #    0.002 M/sec
                 0      cpu-migrations            #    0.000 K/sec
                52      page-faults               #    0.117 M/sec
         1,049,423      cycles                    #    2.369 GHz
           801,456      instructions              #    0.76  insn per cycle
           155,609      branches                  #  351.246 M/sec
             7,026      branch-misses             #    4.52% of all branches
       0.000987570 seconds time elapsed

[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.553 MB perf.data (66 samples) ]

  # perf report --stdio --inline fs__get_mountpoint
  <SNIP>
     1.73%     0.00%  perf     perf           [.] fs__get_mountpoint
            |
            ---fs__get_mountpoint
               fs__get_mountpoint (inline)
               fs__check_mounts (inline)
               __statfs
               entry_SYSCALL_64
               sys_statfs
               SYSC_statfs
               user_statfs
               user_path_at_empty
               filename_lookup
               path_lookupat
               link_path_walk
               inode_permission
               __inode_permission
               kernfs_iop_permission
               kernfs_refresh_inode
               security_inode_notifysecctx
               selinux_inode_notifysecctx
               selinux_inode_setsecurity
               security_context_to_sid
               security_context_to_sid_core
               string_to_context_struct
               symcmp
---
 tools/perf/ui/stdio/hist.c | 85 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 84 insertions(+), 1 deletion(-)
tools/perf/ui/stdio/hist.c +84 -1
index 668f4ae..6128f48 100644
@@ -17,6 +17,66 @@ static size_t callchain__fprintf_left_margin(FILE *fp, int left_margin)
 	return ret;
 }
 
+static size_t inline__fprintf(struct map *map, u64 ip, int left_margin,
+			      int depth, int depth_mask, FILE *fp)
+{
+	struct dso *dso;
+	struct inline_node *node;
+	struct inline_list *ilist;
+	int ret = 0, i;
+
+	if (map == NULL)
+		return 0;
+
+	dso = map->dso;
+	if (dso == NULL)
+		return 0;
+
+	if (dso->kernel != DSO_TYPE_USER)
+		return 0;
+
+	node = dso__parse_addr_inlines(dso,
+				       map__rip_2objdump(map, ip));
+	if (node == NULL)
+		return 0;
+
+	list_for_each_entry(ilist, &node->val, list) {
+		if ((ilist->filename != NULL) || (ilist->funcname != NULL)) {
+			ret += callchain__fprintf_left_margin(fp, left_margin);
+
+			for (i = 0; i < depth; i++) {
+				if (depth_mask & (1 << i))
+					ret += fprintf(fp, "|");
+				else
+					ret += fprintf(fp, " ");
+				ret += fprintf(fp, "          ");
+			}
+
+			if (callchain_param.key == CCKEY_ADDRESS) {
+				if (ilist->filename != NULL)
+					ret += fprintf(fp, "%s:%d (inline)",
+						       ilist->filename,
+						       ilist->line_nr);
+				else
+					ret += fprintf(fp, "??");
+			} else if (ilist->funcname != NULL)
+				ret += fprintf(fp, "%s (inline)",
+					       ilist->funcname);
+			else if (ilist->filename != NULL)
+				ret += fprintf(fp, "%s:%d (inline)",
+					       ilist->filename,
+					       ilist->line_nr);
+			else
+				ret += fprintf(fp, "??");
+
+			ret += fprintf(fp, "\n");
+		}
+	}
+
+	inline_node__delete(node);
+	return ret;
+}
+
 static size_t ipchain__fprintf_graph_line(FILE *fp, int depth, int depth_mask,
 					  int left_margin)
 {
@@ -78,6 +138,10 @@ static size_t ipchain__fprintf_graph(FILE *fp, struct callchain_node *node,
 	fputs(str, fp);
 	fputc('\n', fp);
 	free(alloc_str);
+
+	if (symbol_conf.inline_name)
+		ret += inline__fprintf(chain->ms.map, chain->ip,
+				       left_margin, depth, depth_mask, fp);
 	return ret;
 }
 
@@ -229,6 +293,7 @@ static size_t callchain__fprintf_graph(FILE *fp, struct rb_root *root,
 			if (!i++ && field_order == NULL &&
 			    sort_order && !prefixcmp(sort_order, "sym"))
 				continue;
+
 			if (!printed) {
 				ret += callchain__fprintf_left_margin(fp, left_margin);
 				ret += fprintf(fp, "|\n");
@@ -251,6 +316,13 @@ static size_t callchain__fprintf_graph(FILE *fp, struct rb_root *root,
 
 			if (++entries_printed == callchain_param.print_limit)
 				break;
+
+			if (symbol_conf.inline_name)
+				ret += inline__fprintf(chain->ms.map,
+						       chain->ip,
+						       left_margin,
+						       0, 0,
+						       fp);
 		}
 		root = &cnode->rb_root;
 	}
@@ -529,6 +601,8 @@ static int hist_entry__fprintf(struct hist_entry *he, size_t size,
 			       bool use_callchain)
 {
 	int ret;
+	int callchain_ret = 0;
+	int inline_ret = 0;
 	struct perf_hpp hpp = {
 		.buf		= bf,
 		.size		= size,
@@ -547,7 +621,16 @@ static int hist_entry__fprintf(struct hist_entry *he, size_t size,
 	ret = fprintf(fp, "%s\n", bf);
 
 	if (use_callchain)
-		ret += hist_entry_callchain__fprintf(he, total_period, 0, fp);
+		callchain_ret = hist_entry_callchain__fprintf(he, total_period,
+							      0, fp);
+
+	if (callchain_ret == 0 && symbol_conf.inline_name) {
+		inline_ret = inline__fprintf(he->ms.map, he->ip, 0, 0, 0, fp);
+		ret += inline_ret;
+		if (inline_ret > 0)
+			ret += fprintf(fp, "\n");
+	} else
+		ret += callchain_ret;
 
 	return ret;
 }
author
#9 lore raw

PATCH v6 5/5 perf report: Show inline stack for browser mode

In reply to Jin Yao

If the address belongs to an inlined function, the source information back to the first non-inlined function will be printed.

For example:

1. Show inlined function name
perf report -g function --inline

- 0.69% 0.00% inline ld-2.23.so [.] dl_main
- dl_main

        0.56% _dl_relocate_object
         _dl_relocate_object (inline)
         elf_dynamic_do_Rela (inline)

2. Show the file/line information
perf report -g address --inline

- 0.69% 0.00% inline ld-2.23.so [.] _dl_start

     _dl_start rtld.c:307
      /build/glibc-GKVZIf/glibc-2.23/elf/rtld.c:413 (inline)

+ _dl_sysdep_start dl-sysdep.c:250

---
 tools/perf/ui/browsers/hists.c | 180 +++++++++++++++++++++++++++++++++++++++--
 tools/perf/util/hist.c         |   5 ++
 tools/perf/util/sort.h         |   1 +
 3 files changed, 178 insertions(+), 8 deletions(-)
tools/perf/ui/browsers/hists.c +172 -8
index 2dc82be..62ecaeb 100644
@@ -144,9 +144,60 @@ static void callchain_list__set_folding(struct callchain_list *cl, bool unfold)
 	cl->unfolded = unfold ? cl->has_children : false;
 }
 
+static struct inline_node *inline_node__create(struct map *map, u64 ip)
+{
+	struct dso *dso;
+	struct inline_node *node;
+
+	if (map == NULL)
+		return NULL;
+
+	dso = map->dso;
+	if (dso == NULL)
+		return NULL;
+
+	if (dso->kernel != DSO_TYPE_USER)
+		return NULL;
+
+	node = dso__parse_addr_inlines(dso,
+				       map__rip_2objdump(map, ip));
+
+	return node;
+}
+
+static int inline__count_rows(struct inline_node *node)
+{
+	struct inline_list *ilist;
+	int i = 0;
+
+	if (node == NULL)
+		return 0;
+
+	list_for_each_entry(ilist, &node->val, list) {
+		if ((ilist->filename != NULL) || (ilist->funcname != NULL))
+			i++;
+	}
+
+	return i;
+}
+
+static int callchain_list__inline_rows(struct callchain_list *chain)
+{
+	struct inline_node *node;
+	int rows;
+
+	node = inline_node__create(chain->ms.map, chain->ip);
+	if (node == NULL)
+		return 0;
+
+	rows = inline__count_rows(node);
+	inline_node__delete(node);
+	return rows;
+}
+
 static int callchain_node__count_rows_rb_tree(struct callchain_node *node)
 {
-	int n = 0;
+	int n = 0, inline_rows;
 	struct rb_node *nd;
 
 	for (nd = rb_first(&node->rb_root); nd; nd = rb_next(nd)) {
@@ -156,6 +207,13 @@ static int callchain_node__count_rows_rb_tree(struct callchain_node *node)
 
 		list_for_each_entry(chain, &child->val, list) {
 			++n;
+
+			if (symbol_conf.inline_name) {
+				inline_rows =
+					callchain_list__inline_rows(chain);
+				n += inline_rows;
+			}
+
 			/* We need this because we may not have children */
 			folded_sign = callchain_list__folded(chain);
 			if (folded_sign == '+')
@@ -207,7 +265,7 @@ static int callchain_node__count_rows(struct callchain_node *node)
 {
 	struct callchain_list *chain;
 	bool unfolded = false;
-	int n = 0;
+	int n = 0, inline_rows;
 
 	if (callchain_param.mode == CHAIN_FLAT)
 		return callchain_node__count_flat_rows(node);
@@ -216,6 +274,11 @@ static int callchain_node__count_rows(struct callchain_node *node)
 
 	list_for_each_entry(chain, &node->val, list) {
 		++n;
+		if (symbol_conf.inline_name) {
+			inline_rows = callchain_list__inline_rows(chain);
+			n += inline_rows;
+		}
+
 		unfolded = chain->unfolded;
 	}
 
@@ -362,6 +425,19 @@ static void hist_entry__init_have_children(struct hist_entry *he)
 	he->init_have_children = true;
 }
 
+static void hist_entry_init_inline_node(struct hist_entry *he)
+{
+	if (he->inline_node)
+		return;
+
+	he->inline_node = inline_node__create(he->ms.map, he->ip);
+
+	if (he->inline_node == NULL)
+		return;
+
+	he->has_children = true;
+}
+
 static bool hist_browser__toggle_fold(struct hist_browser *browser)
 {
 	struct hist_entry *he = browser->he_selection;
@@ -393,7 +469,12 @@ static bool hist_browser__toggle_fold(struct hist_browser *browser)
 
 		if (he->unfolded) {
 			if (he->leaf)
-				he->nr_rows = callchain__count_rows(&he->sorted_chain);
+				if (he->inline_node)
+					he->nr_rows = inline__count_rows(
+							he->inline_node);
+				else
+					he->nr_rows = callchain__count_rows(
+							&he->sorted_chain);
 			else
 				he->nr_rows = hierarchy_count_rows(browser, he, false);
 
@@ -753,6 +834,70 @@ static bool hist_browser__check_dump_full(struct hist_browser *browser __maybe_u
 
 #define LEVEL_OFFSET_STEP 3
 
+static int hist_browser__show_inline(struct hist_browser *browser,
+				     struct inline_node *node,
+				     unsigned short row,
+				     int offset)
+{
+	struct inline_list *ilist;
+	char buf[1024];
+	int color, width, first_row;
+
+	first_row = row;
+	width = browser->b.width - (LEVEL_OFFSET_STEP + 2);
+	list_for_each_entry(ilist, &node->val, list) {
+		if ((ilist->filename != NULL) || (ilist->funcname != NULL)) {
+			color = HE_COLORSET_NORMAL;
+			if (ui_browser__is_current_entry(&browser->b, row))
+				color = HE_COLORSET_SELECTED;
+
+			if (callchain_param.key == CCKEY_ADDRESS) {
+				if (ilist->filename != NULL)
+					scnprintf(buf, sizeof(buf),
+						  "%s:%d (inline)",
+						  ilist->filename,
+						  ilist->line_nr);
+				else
+					scnprintf(buf, sizeof(buf), "??");
+			} else if (ilist->funcname != NULL)
+				scnprintf(buf, sizeof(buf), "%s (inline)",
+					  ilist->funcname);
+			else if (ilist->filename != NULL)
+				scnprintf(buf, sizeof(buf),
+					  "%s:%d (inline)",
+					  ilist->filename,
+					  ilist->line_nr);
+			else
+				scnprintf(buf, sizeof(buf), "??");
+
+			ui_browser__set_color(&browser->b, color);
+			hist_browser__gotorc(browser, row, 0);
+			ui_browser__write_nstring(&browser->b, " ",
+				LEVEL_OFFSET_STEP + offset);
+			ui_browser__write_nstring(&browser->b, buf, width);
+			row++;
+		}
+	}
+
+	return row - first_row;
+}
+
+static size_t show_inline_list(struct hist_browser *browser, struct map *map,
+			       u64 ip, int row, int offset)
+{
+	struct inline_node *node;
+	int ret;
+
+	node = inline_node__create(map, ip);
+	if (node == NULL)
+		return 0;
+
+	ret = hist_browser__show_inline(browser, node, row, offset);
+
+	inline_node__delete(node);
+	return ret;
+}
+
 static int hist_browser__show_callchain_list(struct hist_browser *browser,
 					     struct callchain_node *node,
 					     struct callchain_list *chain,
@@ -764,6 +909,7 @@ static int hist_browser__show_callchain_list(struct hist_browser *browser,
 	char bf[1024], *alloc_str;
 	char buf[64], *alloc_str2;
 	const char *str;
+	int inline_rows = 0, ret = 1;
 
 	if (arg->row_offset != 0) {
 		arg->row_offset--;
@@ -801,10 +947,15 @@ static int hist_browser__show_callchain_list(struct hist_browser *browser,
 	}
 
 	print(browser, chain, str, offset, row, arg);
-
 	free(alloc_str);
 	free(alloc_str2);
-	return 1;
+
+	if (symbol_conf.inline_name) {
+		inline_rows = show_inline_list(browser, chain->ms.map,
+					       chain->ip, row + 1, offset);
+	}
+
+	return ret + inline_rows;
 }
 
 static bool check_percent_display(struct rb_node *node, u64 parent_total)
@@ -1228,6 +1379,12 @@ static int hist_browser__show_entry(struct hist_browser *browser,
 		folded_sign = hist_entry__folded(entry);
 	}
 
+	if (symbol_conf.inline_name &&
+	    (!entry->has_children)) {
+		hist_entry_init_inline_node(entry);
+		folded_sign = hist_entry__folded(entry);
+	}
+
 	if (row_offset == 0) {
 		struct hpp_arg arg = {
 			.b		= &browser->b,
@@ -1259,7 +1416,8 @@ static int hist_browser__show_entry(struct hist_browser *browser,
 			}
 
 			if (first) {
-				if (symbol_conf.use_callchain) {
+				if (symbol_conf.use_callchain ||
+					symbol_conf.inline_name) {
 					ui_browser__printf(&browser->b, "%c ", folded_sign);
 					width -= 2;
 				}
@@ -1301,8 +1459,14 @@ static int hist_browser__show_entry(struct hist_browser *browser,
 			.is_current_entry = current_entry,
 		};
 
-		printed += hist_browser__show_callchain(browser, entry, 1, row,
-					hist_browser__show_callchain_entry, &arg,
+		if (entry->inline_node)
+			printed += hist_browser__show_inline(browser,
+					entry->inline_node, row, 0);
+		else
+			printed += hist_browser__show_callchain(browser,
+					entry, 1, row,
+					hist_browser__show_callchain_entry,
+					&arg,
 					hist_browser__check_output_full);
 	}
 
tools/perf/util/hist.c +5 -0
index e3b38f6..3c4d4d0 100644
@@ -1136,6 +1136,11 @@ void hist_entry__delete(struct hist_entry *he)
 		zfree(&he->mem_info);
 	}
 
+	if (he->inline_node) {
+		inline_node__delete(he->inline_node);
+		he->inline_node = NULL;
+	}
+
 	zfree(&he->stat_acc);
 	free_srcline(he->srcline);
 	if (he->srcfile && he->srcfile[0])
tools/perf/util/sort.h +1 -0
index baf20a3..e35fb18 100644
@@ -128,6 +128,7 @@ struct hist_entry {
 	};
 	char			*srcline;
 	char			*srcfile;
+	struct inline_node	*inline_node;
 	struct symbol		*parent;
 	struct branch_info	*branch_info;
 	struct hists		*hists;
Signature · 1 line
2.7.4
#10 lore raw

[tip:perf/core] perf report: Show inline stack for browser mode

perf report: Show inline stack for browser mode
Commit-ID:  0d3eb0b7783f1ee6d3314f101b9cbfb988020222
Gitweb:     http://git.kernel.org/tip/0d3eb0b7783f1ee6d3314f101b9cbfb988020222
Author:     Jin Yao <[email protected]>
AuthorDate: Sun, 26 Mar 2017 04:34:29 +0800
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 27 Mar 2017 12:12:59 -0300

perf report: Show inline stack for browser mode

If the address belongs to an inlined function, the source information back to the first non-inlined function will be printed.

For example:

1. Show inlined function name
perf report -g function --inline

- 0.69% 0.00% inline ld-2.23.so [.] dl_main
- dl_main

        0.56% _dl_relocate_object
         _dl_relocate_object (inline)
         elf_dynamic_do_Rela (inline)

2. Show the file/line information
perf report -g address --inline

- 0.69% 0.00% inline ld-2.23.so [.] _dl_start

     _dl_start rtld.c:307
      /build/glibc-GKVZIf/glibc-2.23/elf/rtld.c:413 (inline)

+ _dl_sysdep_start dl-sysdep.c:250

---
 tools/perf/ui/browsers/hists.c | 180 +++++++++++++++++++++++++++++++++++++++--
 tools/perf/util/hist.c         |   5 ++
 tools/perf/util/sort.h         |   1 +
 3 files changed, 178 insertions(+), 8 deletions(-)
tools/perf/ui/browsers/hists.c +172 -8
index 2dc82be..62ecaeb 100644
@@ -144,9 +144,60 @@ static void callchain_list__set_folding(struct callchain_list *cl, bool unfold)
 	cl->unfolded = unfold ? cl->has_children : false;
 }
 
+static struct inline_node *inline_node__create(struct map *map, u64 ip)
+{
+	struct dso *dso;
+	struct inline_node *node;
+
+	if (map == NULL)
+		return NULL;
+
+	dso = map->dso;
+	if (dso == NULL)
+		return NULL;
+
+	if (dso->kernel != DSO_TYPE_USER)
+		return NULL;
+
+	node = dso__parse_addr_inlines(dso,
+				       map__rip_2objdump(map, ip));
+
+	return node;
+}
+
+static int inline__count_rows(struct inline_node *node)
+{
+	struct inline_list *ilist;
+	int i = 0;
+
+	if (node == NULL)
+		return 0;
+
+	list_for_each_entry(ilist, &node->val, list) {
+		if ((ilist->filename != NULL) || (ilist->funcname != NULL))
+			i++;
+	}
+
+	return i;
+}
+
+static int callchain_list__inline_rows(struct callchain_list *chain)
+{
+	struct inline_node *node;
+	int rows;
+
+	node = inline_node__create(chain->ms.map, chain->ip);
+	if (node == NULL)
+		return 0;
+
+	rows = inline__count_rows(node);
+	inline_node__delete(node);
+	return rows;
+}
+
 static int callchain_node__count_rows_rb_tree(struct callchain_node *node)
 {
-	int n = 0;
+	int n = 0, inline_rows;
 	struct rb_node *nd;
 
 	for (nd = rb_first(&node->rb_root); nd; nd = rb_next(nd)) {
@@ -156,6 +207,13 @@ static int callchain_node__count_rows_rb_tree(struct callchain_node *node)
 
 		list_for_each_entry(chain, &child->val, list) {
 			++n;
+
+			if (symbol_conf.inline_name) {
+				inline_rows =
+					callchain_list__inline_rows(chain);
+				n += inline_rows;
+			}
+
 			/* We need this because we may not have children */
 			folded_sign = callchain_list__folded(chain);
 			if (folded_sign == '+')
@@ -207,7 +265,7 @@ static int callchain_node__count_rows(struct callchain_node *node)
 {
 	struct callchain_list *chain;
 	bool unfolded = false;
-	int n = 0;
+	int n = 0, inline_rows;
 
 	if (callchain_param.mode == CHAIN_FLAT)
 		return callchain_node__count_flat_rows(node);
@@ -216,6 +274,11 @@ static int callchain_node__count_rows(struct callchain_node *node)
 
 	list_for_each_entry(chain, &node->val, list) {
 		++n;
+		if (symbol_conf.inline_name) {
+			inline_rows = callchain_list__inline_rows(chain);
+			n += inline_rows;
+		}
+
 		unfolded = chain->unfolded;
 	}
 
@@ -362,6 +425,19 @@ static void hist_entry__init_have_children(struct hist_entry *he)
 	he->init_have_children = true;
 }
 
+static void hist_entry_init_inline_node(struct hist_entry *he)
+{
+	if (he->inline_node)
+		return;
+
+	he->inline_node = inline_node__create(he->ms.map, he->ip);
+
+	if (he->inline_node == NULL)
+		return;
+
+	he->has_children = true;
+}
+
 static bool hist_browser__toggle_fold(struct hist_browser *browser)
 {
 	struct hist_entry *he = browser->he_selection;
@@ -393,7 +469,12 @@ static bool hist_browser__toggle_fold(struct hist_browser *browser)
 
 		if (he->unfolded) {
 			if (he->leaf)
-				he->nr_rows = callchain__count_rows(&he->sorted_chain);
+				if (he->inline_node)
+					he->nr_rows = inline__count_rows(
+							he->inline_node);
+				else
+					he->nr_rows = callchain__count_rows(
+							&he->sorted_chain);
 			else
 				he->nr_rows = hierarchy_count_rows(browser, he, false);
 
@@ -753,6 +834,70 @@ static bool hist_browser__check_dump_full(struct hist_browser *browser __maybe_u
 
 #define LEVEL_OFFSET_STEP 3
 
+static int hist_browser__show_inline(struct hist_browser *browser,
+				     struct inline_node *node,
+				     unsigned short row,
+				     int offset)
+{
+	struct inline_list *ilist;
+	char buf[1024];
+	int color, width, first_row;
+
+	first_row = row;
+	width = browser->b.width - (LEVEL_OFFSET_STEP + 2);
+	list_for_each_entry(ilist, &node->val, list) {
+		if ((ilist->filename != NULL) || (ilist->funcname != NULL)) {
+			color = HE_COLORSET_NORMAL;
+			if (ui_browser__is_current_entry(&browser->b, row))
+				color = HE_COLORSET_SELECTED;
+
+			if (callchain_param.key == CCKEY_ADDRESS) {
+				if (ilist->filename != NULL)
+					scnprintf(buf, sizeof(buf),
+						  "%s:%d (inline)",
+						  ilist->filename,
+						  ilist->line_nr);
+				else
+					scnprintf(buf, sizeof(buf), "??");
+			} else if (ilist->funcname != NULL)
+				scnprintf(buf, sizeof(buf), "%s (inline)",
+					  ilist->funcname);
+			else if (ilist->filename != NULL)
+				scnprintf(buf, sizeof(buf),
+					  "%s:%d (inline)",
+					  ilist->filename,
+					  ilist->line_nr);
+			else
+				scnprintf(buf, sizeof(buf), "??");
+
+			ui_browser__set_color(&browser->b, color);
+			hist_browser__gotorc(browser, row, 0);
+			ui_browser__write_nstring(&browser->b, " ",
+				LEVEL_OFFSET_STEP + offset);
+			ui_browser__write_nstring(&browser->b, buf, width);
+			row++;
+		}
+	}
+
+	return row - first_row;
+}
+
+static size_t show_inline_list(struct hist_browser *browser, struct map *map,
+			       u64 ip, int row, int offset)
+{
+	struct inline_node *node;
+	int ret;
+
+	node = inline_node__create(map, ip);
+	if (node == NULL)
+		return 0;
+
+	ret = hist_browser__show_inline(browser, node, row, offset);
+
+	inline_node__delete(node);
+	return ret;
+}
+
 static int hist_browser__show_callchain_list(struct hist_browser *browser,
 					     struct callchain_node *node,
 					     struct callchain_list *chain,
@@ -764,6 +909,7 @@ static int hist_browser__show_callchain_list(struct hist_browser *browser,
 	char bf[1024], *alloc_str;
 	char buf[64], *alloc_str2;
 	const char *str;
+	int inline_rows = 0, ret = 1;
 
 	if (arg->row_offset != 0) {
 		arg->row_offset--;
@@ -801,10 +947,15 @@ static int hist_browser__show_callchain_list(struct hist_browser *browser,
 	}
 
 	print(browser, chain, str, offset, row, arg);
-
 	free(alloc_str);
 	free(alloc_str2);
-	return 1;
+
+	if (symbol_conf.inline_name) {
+		inline_rows = show_inline_list(browser, chain->ms.map,
+					       chain->ip, row + 1, offset);
+	}
+
+	return ret + inline_rows;
 }
 
 static bool check_percent_display(struct rb_node *node, u64 parent_total)
@@ -1228,6 +1379,12 @@ static int hist_browser__show_entry(struct hist_browser *browser,
 		folded_sign = hist_entry__folded(entry);
 	}
 
+	if (symbol_conf.inline_name &&
+	    (!entry->has_children)) {
+		hist_entry_init_inline_node(entry);
+		folded_sign = hist_entry__folded(entry);
+	}
+
 	if (row_offset == 0) {
 		struct hpp_arg arg = {
 			.b		= &browser->b,
@@ -1259,7 +1416,8 @@ static int hist_browser__show_entry(struct hist_browser *browser,
 			}
 
 			if (first) {
-				if (symbol_conf.use_callchain) {
+				if (symbol_conf.use_callchain ||
+					symbol_conf.inline_name) {
 					ui_browser__printf(&browser->b, "%c ", folded_sign);
 					width -= 2;
 				}
@@ -1301,8 +1459,14 @@ static int hist_browser__show_entry(struct hist_browser *browser,
 			.is_current_entry = current_entry,
 		};
 
-		printed += hist_browser__show_callchain(browser, entry, 1, row,
-					hist_browser__show_callchain_entry, &arg,
+		if (entry->inline_node)
+			printed += hist_browser__show_inline(browser,
+					entry->inline_node, row, 0);
+		else
+			printed += hist_browser__show_callchain(browser,
+					entry, 1, row,
+					hist_browser__show_callchain_entry,
+					&arg,
 					hist_browser__check_output_full);
 	}
 
tools/perf/util/hist.c +5 -0
index e3b38f6..3c4d4d0 100644
@@ -1136,6 +1136,11 @@ void hist_entry__delete(struct hist_entry *he)
 		zfree(&he->mem_info);
 	}
 
+	if (he->inline_node) {
+		inline_node__delete(he->inline_node);
+		he->inline_node = NULL;
+	}
+
 	zfree(&he->stat_acc);
 	free_srcline(he->srcline);
 	if (he->srcfile && he->srcfile[0])
tools/perf/util/sort.h +1 -0
index baf20a3..e35fb18 100644
@@ -128,6 +128,7 @@ struct hist_entry {
 	};
 	char			*srcline;
 	char			*srcfile;
+	struct inline_node	*inline_node;
 	struct symbol		*parent;
 	struct branch_info	*branch_info;
 	struct hists		*hists;