Skip to contentSkip to conversation

Add new SMCA bank types

PATCH In review Ghannam, Yazen 3 participants 14 messages Feb 1, 2019 – Feb 4, 2019

Subsystems (4)
lore
Share & tools
lore

Ghannam, Yazen

author maintainer
#0 lore raw

cover Add new SMCA bank types

From: Yazen Ghannam <[email protected]>

This series adds decoding for some new SMCA bank types (MP5, NBIO, and PCIE) and also for some new versions of existing bank types (CS, PSP, and SMU).

This series also adds new error type descriptions for existing SMCA bank types that aren't getting a version bump. And also some error descriptions are updated to more closely match the latest documentation.

The last patch in this set is a minor tweak to print the error code and description on a single line rather than separate lines.

Thanks,
Yazen

Yazen Ghannam (5):
x86/MCE/AMD: Add new MP5, NBIO, and PCIE SMCA bank types x86/MCE/AMD: Add new McaTypes for CS, PSP, and SMU EDAC, mce_amd: Add new error descriptions for some SMCA bank types EDAC, mce_amd: Match error descriptions to latest documentation EDAC, mce_amd: Print ExtErrorCode and description on a single line

 arch/x86/include/asm/mce.h    |   6 +
 arch/x86/kernel/cpu/mce/amd.c |  26 +++-
 drivers/edac/mce_amd.c        | 264 +++++++++++++++++++++++-----------
 3 files changed, 205 insertions(+), 91 deletions(-)
Signature · 1 line
2.17.1
author maintainer
#1 lore raw

PATCH 1/5 x86/MCE/AMD: Add new MP5, NBIO, and PCIE SMCA bank types

From: Yazen Ghannam <[email protected]>

Add the (HWID, MCATYPE) tuples and names for the new MP5, NBIO, and PCIE SMCA bank types.

Also, add their respective error descriptions to edac_mce_amd.

---
 arch/x86/include/asm/mce.h    |  3 +++
 arch/x86/kernel/cpu/mce/amd.c | 12 ++++++++++++
 drivers/edac/mce_amd.c        | 32 ++++++++++++++++++++++++++++++++
 3 files changed, 47 insertions(+)
arch/x86/include/asm/mce.h +3 -0
index c1a812bd5a27..91b65d859ca8 100644
@@ -312,6 +312,9 @@ enum smca_bank_types {
 	SMCA_PB,	/* Parameter Block */
 	SMCA_PSP,	/* Platform Security Processor */
 	SMCA_SMU,	/* System Management Unit */
+	SMCA_MP5,	/* Microprocessor 5 Unit */
+	SMCA_NBIO,	/* Northbridge IO Unit */
+	SMCA_PCIE,	/* PCI Express Unit */
 	N_SMCA_BANK_TYPES
 };
 
arch/x86/kernel/cpu/mce/amd.c +12 -0
index ed3327342b40..00f60b8c7e4f 100644
@@ -93,6 +93,9 @@ static struct smca_bank_name smca_names[] = {
 	[SMCA_PB]	= { "param_block",	"Parameter Block" },
 	[SMCA_PSP]	= { "psp",		"Platform Security Processor" },
 	[SMCA_SMU]	= { "smu",		"System Management Unit" },
+	[SMCA_MP5]	= { "mp5",		"Microprocessor 5 Unit" },
+	[SMCA_NBIO]	= { "nbio",		"Northbridge IO Unit" },
+	[SMCA_PCIE]	= { "pcie",		"PCI Express Unit" },
 };
 
 static u32 smca_bank_addrs[MAX_NR_BANKS][NR_BLOCKS] __ro_after_init =
@@ -162,6 +165,15 @@ static struct smca_hwid smca_hwid_mcatypes[] = {
 
 	/* System Management Unit MCA type */
 	{ SMCA_SMU,	 HWID_MCATYPE(0x01, 0x0), 0x1 },
+
+	/* Microprocessor 5 Unit MCA type */
+	{ SMCA_MP5,	 HWID_MCATYPE(0x01, 0x2), 0x3FF },
+
+	/* Northbridge IO Unit MCA type */
+	{ SMCA_NBIO,	 HWID_MCATYPE(0x18, 0x0), 0x1F },
+
+	/* PCI Express Unit MCA type */
+	{ SMCA_PCIE,	 HWID_MCATYPE(0x46, 0x0), 0x1F },
 };
 
 struct smca_bank smca_banks[MAX_NR_BANKS];
drivers/edac/mce_amd.c +32 -0
index c605089d899f..5ab4ab3f0ce6 100644
@@ -285,6 +285,35 @@ static const char * const smca_smu_mce_desc[] = {
 	"SMU RAM ECC or parity error",
 };
 
+static const char * const smca_mp5_mce_desc[] = {
+	"High SRAM ECC or parity error",
+	"Low SRAM ECC or parity error",
+	"Data Cache Bank A ECC or parity error",
+	"Data Cache Bank B ECC or parity error",
+	"Data Tag Cache Bank A ECC or parity error",
+	"Data Tag Cache Bank B ECC or parity error",
+	"Instruction Cache Bank A ECC or parity error",
+	"Instruction Cache Bank B ECC or parity error",
+	"Instruction Tag Cache Bank A ECC or parity error",
+	"Instruction Tag Cache Bank B ECC or parity error",
+};
+
+static const char * const smca_nbio_mce_desc[] = {
+	"ECC or Parity error",
+	"PCIE error",
+	"SDP ErrEvent error",
+	"SDP Egress Poison Error",
+	"IOHC Internal Poison Error",
+};
+
+static const char * const smca_pcie_mce_desc[] = {
+	"CCIX PER Message logging",
+	"CCIX Read Response with Status: Non-Data Error",
+	"CCIX Write Response with Status: Non-Data Error",
+	"CCIX Read Response with Status: Data Error",
+	"CCIX Non-okay write response with data error",
+};
+
 struct smca_mce_desc {
 	const char * const *descs;
 	unsigned int num_descs;
@@ -304,6 +333,9 @@ static struct smca_mce_desc smca_mce_descs[] = {
 	[SMCA_PB]	= { smca_pb_mce_desc,	ARRAY_SIZE(smca_pb_mce_desc)	},
 	[SMCA_PSP]	= { smca_psp_mce_desc,	ARRAY_SIZE(smca_psp_mce_desc)	},
 	[SMCA_SMU]	= { smca_smu_mce_desc,	ARRAY_SIZE(smca_smu_mce_desc)	},
+	[SMCA_MP5]	= { smca_mp5_mce_desc,	ARRAY_SIZE(smca_mp5_mce_desc)	},
+	[SMCA_NBIO]	= { smca_nbio_mce_desc,	ARRAY_SIZE(smca_nbio_mce_desc)	},
+	[SMCA_PCIE]	= { smca_pcie_mce_desc,	ARRAY_SIZE(smca_pcie_mce_desc)	},
 };
 
 static bool f12h_mc0_mce(u16 ec, u8 xec)
#2 lore raw

[tip:ras/core] x86/MCE/AMD, EDAC/mce_amd: Add new MP5, NBIO, and PCIE SMCA bank types

x86/MCE/AMD, EDAC/mce_amd: Add new MP5, NBIO, and PCIE SMCA bank types
Commit-ID:  cbfa447edd6a3825fdb8a4ffae74ff7208f2d2c0
Gitweb:     https://git.kernel.org/tip/cbfa447edd6a3825fdb8a4ffae74ff7208f2d2c0
Author:     Yazen Ghannam <[email protected]>
AuthorDate: Fri, 1 Feb 2019 22:55:51 +0000
Committer:  Borislav Petkov <[email protected]>
CommitDate: Sun, 3 Feb 2019 13:01:44 +0100

x86/MCE/AMD, EDAC/mce_amd: Add new MP5, NBIO, and PCIE SMCA bank types

Add the (HWID, MCATYPE) tuples and names for the new MP5, NBIO, and PCIE SMCA bank types.

Also, add their respective error descriptions to the MCE decoding module edac_mce_amd.

Cc Arnd Bergmann <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Kees Cook <[email protected]>
Cc linux-edac <[email protected]>
Cc Mauro Carvalho Chehab <[email protected]>
Cc Pu Wen <[email protected]>
Cc Qiuxu Zhuo <[email protected]>
Cc Shirish S <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Tony Luck <[email protected]>
Cc Vishal Verma <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/include/asm/mce.h    |  3 +++
 arch/x86/kernel/cpu/mce/amd.c | 12 ++++++++++++
 drivers/edac/mce_amd.c        | 32 ++++++++++++++++++++++++++++++++
 3 files changed, 47 insertions(+)
arch/x86/include/asm/mce.h +3 -0
index c1a812bd5a27..91b65d859ca8 100644
@@ -312,6 +312,9 @@ enum smca_bank_types {
 	SMCA_PB,	/* Parameter Block */
 	SMCA_PSP,	/* Platform Security Processor */
 	SMCA_SMU,	/* System Management Unit */
+	SMCA_MP5,	/* Microprocessor 5 Unit */
+	SMCA_NBIO,	/* Northbridge IO Unit */
+	SMCA_PCIE,	/* PCI Express Unit */
 	N_SMCA_BANK_TYPES
 };
 
arch/x86/kernel/cpu/mce/amd.c +12 -0
index ed3327342b40..00f60b8c7e4f 100644
@@ -93,6 +93,9 @@ static struct smca_bank_name smca_names[] = {
 	[SMCA_PB]	= { "param_block",	"Parameter Block" },
 	[SMCA_PSP]	= { "psp",		"Platform Security Processor" },
 	[SMCA_SMU]	= { "smu",		"System Management Unit" },
+	[SMCA_MP5]	= { "mp5",		"Microprocessor 5 Unit" },
+	[SMCA_NBIO]	= { "nbio",		"Northbridge IO Unit" },
+	[SMCA_PCIE]	= { "pcie",		"PCI Express Unit" },
 };
 
 static u32 smca_bank_addrs[MAX_NR_BANKS][NR_BLOCKS] __ro_after_init =
@@ -162,6 +165,15 @@ static struct smca_hwid smca_hwid_mcatypes[] = {
 
 	/* System Management Unit MCA type */
 	{ SMCA_SMU,	 HWID_MCATYPE(0x01, 0x0), 0x1 },
+
+	/* Microprocessor 5 Unit MCA type */
+	{ SMCA_MP5,	 HWID_MCATYPE(0x01, 0x2), 0x3FF },
+
+	/* Northbridge IO Unit MCA type */
+	{ SMCA_NBIO,	 HWID_MCATYPE(0x18, 0x0), 0x1F },
+
+	/* PCI Express Unit MCA type */
+	{ SMCA_PCIE,	 HWID_MCATYPE(0x46, 0x0), 0x1F },
 };
 
 struct smca_bank smca_banks[MAX_NR_BANKS];
drivers/edac/mce_amd.c +32 -0
index c605089d899f..5ab4ab3f0ce6 100644
@@ -285,6 +285,35 @@ static const char * const smca_smu_mce_desc[] = {
 	"SMU RAM ECC or parity error",
 };
 
+static const char * const smca_mp5_mce_desc[] = {
+	"High SRAM ECC or parity error",
+	"Low SRAM ECC or parity error",
+	"Data Cache Bank A ECC or parity error",
+	"Data Cache Bank B ECC or parity error",
+	"Data Tag Cache Bank A ECC or parity error",
+	"Data Tag Cache Bank B ECC or parity error",
+	"Instruction Cache Bank A ECC or parity error",
+	"Instruction Cache Bank B ECC or parity error",
+	"Instruction Tag Cache Bank A ECC or parity error",
+	"Instruction Tag Cache Bank B ECC or parity error",
+};
+
+static const char * const smca_nbio_mce_desc[] = {
+	"ECC or Parity error",
+	"PCIE error",
+	"SDP ErrEvent error",
+	"SDP Egress Poison Error",
+	"IOHC Internal Poison Error",
+};
+
+static const char * const smca_pcie_mce_desc[] = {
+	"CCIX PER Message logging",
+	"CCIX Read Response with Status: Non-Data Error",
+	"CCIX Write Response with Status: Non-Data Error",
+	"CCIX Read Response with Status: Data Error",
+	"CCIX Non-okay write response with data error",
+};
+
 struct smca_mce_desc {
 	const char * const *descs;
 	unsigned int num_descs;
@@ -304,6 +333,9 @@ static struct smca_mce_desc smca_mce_descs[] = {
 	[SMCA_PB]	= { smca_pb_mce_desc,	ARRAY_SIZE(smca_pb_mce_desc)	},
 	[SMCA_PSP]	= { smca_psp_mce_desc,	ARRAY_SIZE(smca_psp_mce_desc)	},
 	[SMCA_SMU]	= { smca_smu_mce_desc,	ARRAY_SIZE(smca_smu_mce_desc)	},
+	[SMCA_MP5]	= { smca_mp5_mce_desc,	ARRAY_SIZE(smca_mp5_mce_desc)	},
+	[SMCA_NBIO]	= { smca_nbio_mce_desc,	ARRAY_SIZE(smca_nbio_mce_desc)	},
+	[SMCA_PCIE]	= { smca_pcie_mce_desc,	ARRAY_SIZE(smca_pcie_mce_desc)	},
 };
 
 static bool f12h_mc0_mce(u16 ec, u8 xec)
author maintainer
#3 lore raw

PATCH 2/5 x86/MCE/AMD: Add new McaTypes for CS, PSP, and SMU

In reply to Ghannam, Yazen

From: Yazen Ghannam <[email protected]>

The existing CS, PSP, and SMU SMCA bank types will see new versions (as indicated by their McaTypes) in future SMCA systems.

Add the new (HWID, MCATYPE) tuples for these new versions. Reuse the same names as the older versions, since they are logically the same to the user. SMCA systems won't mix and match IP blocks with different McaType versions in the same system, so there isn't a need to distinguish them. The MCA_IPID register is saved when logging an MCA error, and that can be used to triage the error.

Also, add the new error descriptions to edac_mce_amd. Some error types (positions in the list) are overloaded compared to the previous McaTypes. Therefore, just create new lists of the error descriptions to keep things simple even if some of the error descriptions are the same between versions.

---
 arch/x86/include/asm/mce.h    |  3 ++
 arch/x86/kernel/cpu/mce/amd.c |  6 ++++
 drivers/edac/mce_amd.c        | 55 +++++++++++++++++++++++++++++++++++
 3 files changed, 64 insertions(+)
arch/x86/include/asm/mce.h +3 -0
index 91b65d859ca8..299a38536567 100644
@@ -307,11 +307,14 @@ enum smca_bank_types {
 	SMCA_FP,	/* Floating Point */
 	SMCA_L3_CACHE,	/* L3 Cache */
 	SMCA_CS,	/* Coherent Slave */
+	SMCA_CS_V2,	/* Coherent Slave */
 	SMCA_PIE,	/* Power, Interrupts, etc. */
 	SMCA_UMC,	/* Unified Memory Controller */
 	SMCA_PB,	/* Parameter Block */
 	SMCA_PSP,	/* Platform Security Processor */
+	SMCA_PSP_V2,	/* Platform Security Processor */
 	SMCA_SMU,	/* System Management Unit */
+	SMCA_SMU_V2,	/* System Management Unit */
 	SMCA_MP5,	/* Microprocessor 5 Unit */
 	SMCA_NBIO,	/* Northbridge IO Unit */
 	SMCA_PCIE,	/* PCI Express Unit */
arch/x86/kernel/cpu/mce/amd.c +6 -0
index 00f60b8c7e4f..bd1331b241ca 100644
@@ -88,11 +88,14 @@ static struct smca_bank_name smca_names[] = {
 	[SMCA_FP]	= { "floating_point",	"Floating Point Unit" },
 	[SMCA_L3_CACHE]	= { "l3_cache",		"L3 Cache" },
 	[SMCA_CS]	= { "coherent_slave",	"Coherent Slave" },
+	[SMCA_CS_V2]	= { "coherent_slave",	"Coherent Slave" },
 	[SMCA_PIE]	= { "pie",		"Power, Interrupts, etc." },
 	[SMCA_UMC]	= { "umc",		"Unified Memory Controller" },
 	[SMCA_PB]	= { "param_block",	"Parameter Block" },
 	[SMCA_PSP]	= { "psp",		"Platform Security Processor" },
+	[SMCA_PSP_V2]	= { "psp",		"Platform Security Processor" },
 	[SMCA_SMU]	= { "smu",		"System Management Unit" },
+	[SMCA_SMU_V2]	= { "smu",		"System Management Unit" },
 	[SMCA_MP5]	= { "mp5",		"Microprocessor 5 Unit" },
 	[SMCA_NBIO]	= { "nbio",		"Northbridge IO Unit" },
 	[SMCA_PCIE]	= { "pcie",		"PCI Express Unit" },
@@ -153,6 +156,7 @@ static struct smca_hwid smca_hwid_mcatypes[] = {
 	/* Data Fabric MCA types */
 	{ SMCA_CS,	 HWID_MCATYPE(0x2E, 0x0), 0x1FF },
 	{ SMCA_PIE,	 HWID_MCATYPE(0x2E, 0x1), 0xF },
+	{ SMCA_CS_V2,	 HWID_MCATYPE(0x2E, 0x2), 0x3FFF },
 
 	/* Unified Memory Controller MCA type */
 	{ SMCA_UMC,	 HWID_MCATYPE(0x96, 0x0), 0x3F },
@@ -162,9 +166,11 @@ static struct smca_hwid smca_hwid_mcatypes[] = {
 
 	/* Platform Security Processor MCA type */
 	{ SMCA_PSP,	 HWID_MCATYPE(0xFF, 0x0), 0x1 },
+	{ SMCA_PSP_V2,	 HWID_MCATYPE(0xFF, 0x1), 0x3FFFF },
 
 	/* System Management Unit MCA type */
 	{ SMCA_SMU,	 HWID_MCATYPE(0x01, 0x0), 0x1 },
+	{ SMCA_SMU_V2,	 HWID_MCATYPE(0x01, 0x1), 0x7FF },
 
 	/* Microprocessor 5 Unit MCA type */
 	{ SMCA_MP5,	 HWID_MCATYPE(0x01, 0x2), 0x3FF },
drivers/edac/mce_amd.c +55 -0

82 lines not on this page · raw message

#4 lore raw

[tip:ras/core] x86/MCE/AMD, EDAC/mce_amd: Add new McaTypes for CS, PSP, and SMU units

x86/MCE/AMD, EDAC/mce_amd: Add new McaTypes for CS, PSP, and SMU units
Commit-ID:  3ad7e748c12cc771df6020a552def3e1727e8a17
Gitweb:     https://git.kernel.org/tip/3ad7e748c12cc771df6020a552def3e1727e8a17
Author:     Yazen Ghannam <[email protected]>
AuthorDate: Fri, 1 Feb 2019 22:55:52 +0000
Committer:  Borislav Petkov <[email protected]>
CommitDate: Sun, 3 Feb 2019 13:01:57 +0100

x86/MCE/AMD, EDAC/mce_amd: Add new McaTypes for CS, PSP, and SMU units

The existing CS, PSP, and SMU SMCA bank types will see new versions (as indicated by their McaTypes) in future SMCA systems.

Add the new (HWID, MCATYPE) tuples for these new versions. Reuse the same names as the older versions, since they are logically the same to the user. SMCA systems won't mix and match IP blocks with different McaType versions in the same system, so there isn't a need to distinguish them. The MCA_IPID register is saved when logging an MCA error, and that can be used to triage the error.

Also, add the new error descriptions to edac_mce_amd. Some error types (positions in the list) are overloaded compared to the previous McaTypes. Therefore, just create new lists of the error descriptions to keep things simple even if some of the error descriptions are the same between versions.

Cc Arnd Bergmann <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Kees Cook <[email protected]>
Cc linux-edac <[email protected]>
Cc Mauro Carvalho Chehab <[email protected]>
Cc Pu Wen <[email protected]>
Cc Qiuxu Zhuo <[email protected]>
Cc Shirish S <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Tony Luck <[email protected]>
Cc Vishal Verma <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/include/asm/mce.h    |  3 +++
 arch/x86/kernel/cpu/mce/amd.c |  6 +++++
 drivers/edac/mce_amd.c        | 55 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 64 insertions(+)
arch/x86/include/asm/mce.h +3 -0
index 91b65d859ca8..299a38536567 100644
@@ -307,11 +307,14 @@ enum smca_bank_types {
 	SMCA_FP,	/* Floating Point */
 	SMCA_L3_CACHE,	/* L3 Cache */
 	SMCA_CS,	/* Coherent Slave */
+	SMCA_CS_V2,	/* Coherent Slave */
 	SMCA_PIE,	/* Power, Interrupts, etc. */
 	SMCA_UMC,	/* Unified Memory Controller */
 	SMCA_PB,	/* Parameter Block */
 	SMCA_PSP,	/* Platform Security Processor */
+	SMCA_PSP_V2,	/* Platform Security Processor */
 	SMCA_SMU,	/* System Management Unit */
+	SMCA_SMU_V2,	/* System Management Unit */
 	SMCA_MP5,	/* Microprocessor 5 Unit */
 	SMCA_NBIO,	/* Northbridge IO Unit */
 	SMCA_PCIE,	/* PCI Express Unit */
arch/x86/kernel/cpu/mce/amd.c +6 -0
index 00f60b8c7e4f..bd1331b241ca 100644
@@ -88,11 +88,14 @@ static struct smca_bank_name smca_names[] = {
 	[SMCA_FP]	= { "floating_point",	"Floating Point Unit" },
 	[SMCA_L3_CACHE]	= { "l3_cache",		"L3 Cache" },
 	[SMCA_CS]	= { "coherent_slave",	"Coherent Slave" },
+	[SMCA_CS_V2]	= { "coherent_slave",	"Coherent Slave" },
 	[SMCA_PIE]	= { "pie",		"Power, Interrupts, etc." },
 	[SMCA_UMC]	= { "umc",		"Unified Memory Controller" },
 	[SMCA_PB]	= { "param_block",	"Parameter Block" },
 	[SMCA_PSP]	= { "psp",		"Platform Security Processor" },
+	[SMCA_PSP_V2]	= { "psp",		"Platform Security Processor" },
 	[SMCA_SMU]	= { "smu",		"System Management Unit" },
+	[SMCA_SMU_V2]	= { "smu",		"System Management Unit" },
 	[SMCA_MP5]	= { "mp5",		"Microprocessor 5 Unit" },
 	[SMCA_NBIO]	= { "nbio",		"Northbridge IO Unit" },
 	[SMCA_PCIE]	= { "pcie",		"PCI Express Unit" },
@@ -153,6 +156,7 @@ static struct smca_hwid smca_hwid_mcatypes[] = {
 	/* Data Fabric MCA types */
 	{ SMCA_CS,	 HWID_MCATYPE(0x2E, 0x0), 0x1FF },
 	{ SMCA_PIE,	 HWID_MCATYPE(0x2E, 0x1), 0xF },
+	{ SMCA_CS_V2,	 HWID_MCATYPE(0x2E, 0x2), 0x3FFF },
 
 	/* Unified Memory Controller MCA type */
 	{ SMCA_UMC,	 HWID_MCATYPE(0x96, 0x0), 0x3F },
@@ -162,9 +166,11 @@ static struct smca_hwid smca_hwid_mcatypes[] = {
 
 	/* Platform Security Processor MCA type */
 	{ SMCA_PSP,	 HWID_MCATYPE(0xFF, 0x0), 0x1 },
+	{ SMCA_PSP_V2,	 HWID_MCATYPE(0xFF, 0x1), 0x3FFFF },
 
 	/* System Management Unit MCA type */
 	{ SMCA_SMU,	 HWID_MCATYPE(0x01, 0x0), 0x1 },
+	{ SMCA_SMU_V2,	 HWID_MCATYPE(0x01, 0x1), 0x7FF },
 
 	/* Microprocessor 5 Unit MCA type */
 	{ SMCA_MP5,	 HWID_MCATYPE(0x01, 0x2), 0x3FF },
drivers/edac/mce_amd.c +55 -0

82 lines not on this page · raw message

author maintainer
#5 lore raw

PATCH 3/5 EDAC, mce_amd: Add new error descriptions for some SMCA bank types

In reply to Ghannam, Yazen

From: Yazen Ghannam <[email protected]>

Some SMCA bank types on future systems will report new error types even though the bank type is not treated as a new version. These new error types will reported by bits that are reserved in past systems.

Add the new error descriptions to the lists in edac_mce_amd.

---
 arch/x86/kernel/cpu/mce/amd.c | 8 ++++----
 drivers/edac/mce_amd.c        | 6 +++++-
 2 files changed, 9 insertions(+), 5 deletions(-)
arch/x86/kernel/cpu/mce/amd.c +4 -4
index bd1331b241ca..e64de5149e50 100644
@@ -144,22 +144,22 @@ static struct smca_hwid smca_hwid_mcatypes[] = {
 	{ SMCA_RESERVED, HWID_MCATYPE(0x00, 0x0), 0x0 },
 
 	/* ZN Core (HWID=0xB0) MCA types */
-	{ SMCA_LS,	 HWID_MCATYPE(0xB0, 0x0), 0x1FFFEF },
+	{ SMCA_LS,	 HWID_MCATYPE(0xB0, 0x0), 0x1FFFFF },
 	{ SMCA_IF,	 HWID_MCATYPE(0xB0, 0x1), 0x3FFF },
 	{ SMCA_L2_CACHE, HWID_MCATYPE(0xB0, 0x2), 0xF },
 	{ SMCA_DE,	 HWID_MCATYPE(0xB0, 0x3), 0x1FF },
 	/* HWID 0xB0 MCATYPE 0x4 is Reserved */
-	{ SMCA_EX,	 HWID_MCATYPE(0xB0, 0x5), 0x7FF },
+	{ SMCA_EX,	 HWID_MCATYPE(0xB0, 0x5), 0xFFF },
 	{ SMCA_FP,	 HWID_MCATYPE(0xB0, 0x6), 0x7F },
 	{ SMCA_L3_CACHE, HWID_MCATYPE(0xB0, 0x7), 0xFF },
 
 	/* Data Fabric MCA types */
 	{ SMCA_CS,	 HWID_MCATYPE(0x2E, 0x0), 0x1FF },
-	{ SMCA_PIE,	 HWID_MCATYPE(0x2E, 0x1), 0xF },
+	{ SMCA_PIE,	 HWID_MCATYPE(0x2E, 0x1), 0x1F },
 	{ SMCA_CS_V2,	 HWID_MCATYPE(0x2E, 0x2), 0x3FFF },
 
 	/* Unified Memory Controller MCA type */
-	{ SMCA_UMC,	 HWID_MCATYPE(0x96, 0x0), 0x3F },
+	{ SMCA_UMC,	 HWID_MCATYPE(0x96, 0x0), 0xFF },
 
 	/* Parameter Block MCA type */
 	{ SMCA_PB,	 HWID_MCATYPE(0x05, 0x0), 0x1 },
drivers/edac/mce_amd.c +5 -1
index 184c90172d17..c79e650aa606 100644
@@ -155,7 +155,7 @@ static const char * const smca_ls_mce_desc[] = {
 	"Store queue parity",
 	"Miss address buffer payload parity",
 	"L1 TLB parity",
-	"Reserved",
+	"DC Tag error type 5",
 	"DC tag error type 6",
 	"DC tag error type 1",
 	"Internal error type 1",
@@ -222,6 +222,7 @@ static const char * const smca_ex_mce_desc[] = {
 	"Retire status queue parity error",
 	"Scheduling queue parity error",
 	"Branch buffer queue parity error",
+	"Hardware Assertion error",
 };
 
 static const char * const smca_fp_mce_desc[] = {
@@ -279,6 +280,7 @@ static const char * const smca_pie_mce_desc[] = {
 	"Internal PIE register security violation",
 	"Error on GMI link",
 	"Poison data written to internal PIE register",
+	"A deferred error was detected in the DF"
 };
 
 static const char * const smca_umc_mce_desc[] = {
@@ -288,6 +290,8 @@ static const char * const smca_umc_mce_desc[] = {
 	"Advanced peripheral bus error",
 	"Command/address parity error",
 	"Write data CRC error",
+	"DCQ SRAM ECC error",
+	"AES SRAM ECC error",
 };
 
 static const char * const smca_pb_mce_desc[] = {
#6 lore raw

[tip:ras/core] x86/MCE/AMD, EDAC/mce_amd: Add new error descriptions for some SMCA bank types

x86/MCE/AMD, EDAC/mce_amd: Add new error descriptions for some SMCA bank types
Commit-ID:  8a5dd2cd2f2e94878cacc969655a69ca214795ab
Gitweb:     https://git.kernel.org/tip/8a5dd2cd2f2e94878cacc969655a69ca214795ab
Author:     Yazen Ghannam <[email protected]>
AuthorDate: Fri, 1 Feb 2019 22:55:52 +0000
Committer:  Borislav Petkov <[email protected]>
CommitDate: Sun, 3 Feb 2019 13:05:16 +0100

x86/MCE/AMD, EDAC/mce_amd: Add new error descriptions for some SMCA bank types

Some SMCA bank types on future systems will report new error types even though the bank type is not treated as a new version. These new error types will reported by bits that are reserved in past systems.

Add the new error descriptions to the lists in edac_mce_amd.

Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Kees Cook <[email protected]>
Cc linux-edac <[email protected]>
Cc Mauro Carvalho Chehab <[email protected]>
Cc Shirish S <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Tony Luck <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/kernel/cpu/mce/amd.c | 8 ++++----
 drivers/edac/mce_amd.c        | 6 +++++-
 2 files changed, 9 insertions(+), 5 deletions(-)
arch/x86/kernel/cpu/mce/amd.c +4 -4
index bd1331b241ca..e64de5149e50 100644
@@ -144,22 +144,22 @@ static struct smca_hwid smca_hwid_mcatypes[] = {
 	{ SMCA_RESERVED, HWID_MCATYPE(0x00, 0x0), 0x0 },
 
 	/* ZN Core (HWID=0xB0) MCA types */
-	{ SMCA_LS,	 HWID_MCATYPE(0xB0, 0x0), 0x1FFFEF },
+	{ SMCA_LS,	 HWID_MCATYPE(0xB0, 0x0), 0x1FFFFF },
 	{ SMCA_IF,	 HWID_MCATYPE(0xB0, 0x1), 0x3FFF },
 	{ SMCA_L2_CACHE, HWID_MCATYPE(0xB0, 0x2), 0xF },
 	{ SMCA_DE,	 HWID_MCATYPE(0xB0, 0x3), 0x1FF },
 	/* HWID 0xB0 MCATYPE 0x4 is Reserved */
-	{ SMCA_EX,	 HWID_MCATYPE(0xB0, 0x5), 0x7FF },
+	{ SMCA_EX,	 HWID_MCATYPE(0xB0, 0x5), 0xFFF },
 	{ SMCA_FP,	 HWID_MCATYPE(0xB0, 0x6), 0x7F },
 	{ SMCA_L3_CACHE, HWID_MCATYPE(0xB0, 0x7), 0xFF },
 
 	/* Data Fabric MCA types */
 	{ SMCA_CS,	 HWID_MCATYPE(0x2E, 0x0), 0x1FF },
-	{ SMCA_PIE,	 HWID_MCATYPE(0x2E, 0x1), 0xF },
+	{ SMCA_PIE,	 HWID_MCATYPE(0x2E, 0x1), 0x1F },
 	{ SMCA_CS_V2,	 HWID_MCATYPE(0x2E, 0x2), 0x3FFF },
 
 	/* Unified Memory Controller MCA type */
-	{ SMCA_UMC,	 HWID_MCATYPE(0x96, 0x0), 0x3F },
+	{ SMCA_UMC,	 HWID_MCATYPE(0x96, 0x0), 0xFF },
 
 	/* Parameter Block MCA type */
 	{ SMCA_PB,	 HWID_MCATYPE(0x05, 0x0), 0x1 },
drivers/edac/mce_amd.c +5 -1
index 184c90172d17..c79e650aa606 100644
@@ -155,7 +155,7 @@ static const char * const smca_ls_mce_desc[] = {
 	"Store queue parity",
 	"Miss address buffer payload parity",
 	"L1 TLB parity",
-	"Reserved",
+	"DC Tag error type 5",
 	"DC tag error type 6",
 	"DC tag error type 1",
 	"Internal error type 1",
@@ -222,6 +222,7 @@ static const char * const smca_ex_mce_desc[] = {
 	"Retire status queue parity error",
 	"Scheduling queue parity error",
 	"Branch buffer queue parity error",
+	"Hardware Assertion error",
 };
 
 static const char * const smca_fp_mce_desc[] = {
@@ -279,6 +280,7 @@ static const char * const smca_pie_mce_desc[] = {
 	"Internal PIE register security violation",
 	"Error on GMI link",
 	"Poison data written to internal PIE register",
+	"A deferred error was detected in the DF"
 };
 
 static const char * const smca_umc_mce_desc[] = {
@@ -288,6 +290,8 @@ static const char * const smca_umc_mce_desc[] = {
 	"Advanced peripheral bus error",
 	"Command/address parity error",
 	"Write data CRC error",
+	"DCQ SRAM ECC error",
+	"AES SRAM ECC error",
 };
 
 static const char * const smca_pb_mce_desc[] = {
author maintainer
#7 lore raw

PATCH 4/5 EDAC, mce_amd: Match error descriptions to latest documentation

In reply to Ghannam, Yazen

From: Yazen Ghannam <[email protected]>

Update the error descriptions to match the latest documentation for easier searching. In some cases the changes are small and in other cases the changes may be total rewording of the description.

No functional change.

---
 drivers/edac/mce_amd.c | 166 ++++++++++++++++++++---------------------
 1 file changed, 83 insertions(+), 83 deletions(-)
drivers/edac/mce_amd.c +83 -83
index c79e650aa606..7e29ceabdf6f 100644
@@ -151,74 +151,74 @@ static const char * const mc6_mce_desc[] = {
 
 /* Scalable MCA error strings */
 static const char * const smca_ls_mce_desc[] = {
-	"Load queue parity",
-	"Store queue parity",
-	"Miss address buffer payload parity",
-	"L1 TLB parity",
+	"Load queue parity error",
+	"Store queue parity error",
+	"Miss address buffer payload parity error",
+	"Level 1 TLB parity error",
 	"DC Tag error type 5",
-	"DC tag error type 6",
-	"DC tag error type 1",
+	"DC Tag error type 6",
+	"DC Tag error type 1",
 	"Internal error type 1",
 	"Internal error type 2",
-	"Sys Read data error thread 0",
-	"Sys read data error thread 1",
-	"DC tag error type 2",
-	"DC data error type 1 (poison consumption)",
-	"DC data error type 2",
-	"DC data error type 3",
-	"DC tag error type 4",
-	"L2 TLB parity",
+	"System Read Data Error Thread 0",
+	"System Read Data Error Thread 1",
+	"DC Tag error type 2",
+	"DC Data error type 1 and poison consumption",
+	"DC Data error type 2",
+	"DC Data error type 3",
+	"DC Tag error type 4",
+	"Level 2 TLB parity error",
 	"PDC parity error",
-	"DC tag error type 3",
-	"DC tag error type 5",
-	"L2 fill data error",
+	"DC Tag error type 3",
+	"DC Tag error type 5",
+	"L2 Fill Data error",
 };
 
 static const char * const smca_if_mce_desc[] = {
-	"microtag probe port parity error",
-	"IC microtag or full tag multi-hit error",
-	"IC full tag parity",
-	"IC data array parity",
-	"Decoupling queue phys addr parity error",
-	"L0 ITLB parity error",
-	"L1 ITLB parity error",
-	"L2 ITLB parity error",
-	"BPQ snoop parity on Thread 0",
-	"BPQ snoop parity on Thread 1",
-	"L1 BTB multi-match error",
-	"L2 BTB multi-match error",
-	"L2 Cache Response Poison error",
-	"System Read Data error",
+	"Op Cache Microtag Probe Port Parity Error",
+	"IC Microtag or Full Tag Multi-hit Error",
+	"IC Full Tag Parity Error",
+	"IC Data Array Parity Error",
+	"Decoupling Queue PhysAddr Parity Error",
+	"L0 ITLB Parity Error",
+	"L1 ITLB Parity Error",
+	"L2 ITLB Parity Error",
+	"BPQ Thread 0 Snoop Parity Error",
+	"BPQ Thread 1 Snoop Parity Error",
+	"L1 BTB Multi-Match Error",
+	"L2 BTB Multi-Match Error",
+	"L2 Cache Response Poison Error",
+	"System Read Data Error",
 };
 
 static const char * const smca_l2_mce_desc[] = {
-	"L2M tag multi-way-hit error",
-	"L2M tag ECC error",
-	"L2M data ECC error",
-	"HW assert",
+	"L2M Tag Multiple-Way-Hit error",
+	"L2M Tag or State Array ECC Error",
+	"L2M Data Array ECC Error",
+	"Hardware Assert Error",
 };
 
 static const char * const smca_de_mce_desc[] = {
-	"uop cache tag parity error",
-	"uop cache data parity error",
-	"Insn buffer parity error",
-	"uop queue parity error",
-	"Insn dispatch queue parity error",
-	"Fetch address FIFO parity",
-	"Patch RAM data parity",
-	"Patch RAM sequencer parity",
-	"uop buffer parity"
+	"Micro-op cache tag parity error",
+	"Micro-op cache data parity error",
+	"Instruction buffer parity error",
+	"Micro-op queue parity error",
+	"Instruction dispatch queue parity error",
+	"Fetch address FIFO parity error",
+	"Patch RAM data parity error",
+	"Patch RAM sequencer parity error",
+	"Micro-op buffer parity error"
 };
 
 static const char * const smca_ex_mce_desc[] = {
-	"Watchdog timeout error",
-	"Phy register file parity",
-	"Flag register file parity",
-	"Immediate displacement register file parity",
-	"Address generator payload parity",
-	"EX payload parity",
-	"Checkpoint queue parity",
-	"Retire dispatch queue parity",
+	"Watchdog Timeout error",
+	"Physical register file parity error",
+	"Flag register file parity error",
+	"Immediate displacement register file parity error",
+	"Address generator payload parity error",
+	"EX payload parity error",
+	"Checkpoint queue parity error",
+	"Retire dispatch queue parity error",
 	"Retire status queue parity error",
 	"Scheduling queue parity error",
 	"Branch buffer queue parity error",
@@ -226,36 +226,36 @@ static const char * const smca_ex_mce_desc[] = {
 };
 
 static const char * const smca_fp_mce_desc[] = {
-	"Physical register file parity",
-	"Freelist parity error",
-	"Schedule queue parity",
+	"Physical register file (PRF) parity error",
+	"Freelist (FL) parity error",
+	"Schedule queue parity error",
 	"NSQ parity error",
-	"Retire queue parity",
-	"Status register file parity",
+	"Retire queue (RQ) parity error",
+	"Status register file (SRF) parity error",
 	"Hardware assertion",
 };
 
 static const char * const smca_l3_mce_desc[] = {
-	"Shadow tag macro ECC error",
-	"Shadow tag macro multi-way-hit error",
-	"L3M tag ECC error",
-	"L3M tag multi-way-hit error",
-	"L3M data ECC error",
-	"XI parity, L3 fill done channel error",
-	"L3 victim queue parity",
-	"L3 HW assert",
+	"Shadow Tag Macro ECC Error",
+	"Shadow Tag Macro Multi-way-hit Error",
+	"L3M Tag ECC Error",
+	"L3M Tag Multi-way-hit Error",
+	"L3M Data ECC Error",
+	"SDP Parity Error or SystemReadDataError from XI",
+	"L3 Victim Queue Parity Error",
+	"L3 Hardware Assertion",
 };
 
 static const char * const smca_cs_mce_desc[] = {
-	"Illegal request from transport layer",
-	"Address violation",
-	"Security violation",
-	"Illegal response from transport layer",
-	"Unexpected response",
-	"Parity error on incoming request or probe response data",
-	"Parity error on incoming read response data",
-	"Atomic request parity",
-	"ECC error on probe filter access",
+	"Illegal Request",
+	"Address Violation",
+	"Security Violation",
+	"Illegal Response",
+	"Unexpected Response",
+	"Request or Probe Parity Error",
+	"Read Response Parity Error",
+	"Atomic Request Parity Error",
+	"Probe Filter ECC Error",
 };
 
 static const char * const smca_cs2_mce_desc[] = {
@@ -276,30 +276,30 @@ static const char * const smca_cs2_mce_desc[] = {
 };
 
 static const char * const smca_pie_mce_desc[] = {
-	"HW assert",
-	"Internal PIE register security violation",
-	"Error on GMI link",
-	"Poison data written to internal PIE register",
+	"Hardware Assert",
+	"Register security violation",
+	"Link Error",
+	"Poison data consumption",
 	"A deferred error was detected in the DF"
 };
 
 static const char * const smca_umc_mce_desc[] = {
 	"DRAM ECC error",
-	"Data poison error on DRAM",
+	"Data poison error",
 	"SDP parity error",
 	"Advanced peripheral bus error",
-	"Command/address parity error",
+	"Address/Command parity error",
 	"Write data CRC error",
 	"DCQ SRAM ECC error",
 	"AES SRAM ECC error",
 };
 
 static const char * const smca_pb_mce_desc[] = {
-	"Parameter Block RAM ECC error",
+	"An ECC error in the Parameter Block RAM array",
 };
 
 static const char * const smca_psp_mce_desc[] = {
-	"PSP RAM ECC or parity error",
+	"An ECC or parity error in a PSP RAM instance",
 };
 
 static const char * const smca_psp2_mce_desc[] = {
@@ -324,7 +324,7 @@ static const char * const smca_psp2_mce_desc[] = {
 };
 
 static const char * const smca_smu_mce_desc[] = {
-	"SMU RAM ECC or parity error",
+	"An ECC or parity error in an SMU RAM instance",
 };
 
 static const char * const smca_smu2_mce_desc[] = {
#8 lore raw

[tip:ras/core] EDAC, mce_amd: Match error descriptions to latest documentation

EDAC, mce_amd: Match error descriptions to latest documentation
Commit-ID:  e03447ee718b331be8f3abc388c7bf7d325dfab4
Gitweb:     https://git.kernel.org/tip/e03447ee718b331be8f3abc388c7bf7d325dfab4
Author:     Yazen Ghannam <[email protected]>
AuthorDate: Fri, 1 Feb 2019 22:55:53 +0000
Committer:  Borislav Petkov <[email protected]>
CommitDate: Sun, 3 Feb 2019 13:16:50 +0100

EDAC, mce_amd: Match error descriptions to latest documentation

Update the error descriptions to match the latest documentation for easier searching. In some cases the changes are small and in other cases the changes may be total rewording of the description.

No functional changes.

---
 drivers/edac/mce_amd.c | 166 ++++++++++++++++++++++++-------------------------
 1 file changed, 83 insertions(+), 83 deletions(-)
drivers/edac/mce_amd.c +83 -83
index c79e650aa606..7e29ceabdf6f 100644
@@ -151,74 +151,74 @@ static const char * const mc6_mce_desc[] = {
 
 /* Scalable MCA error strings */
 static const char * const smca_ls_mce_desc[] = {
-	"Load queue parity",
-	"Store queue parity",
-	"Miss address buffer payload parity",
-	"L1 TLB parity",
+	"Load queue parity error",
+	"Store queue parity error",
+	"Miss address buffer payload parity error",
+	"Level 1 TLB parity error",
 	"DC Tag error type 5",
-	"DC tag error type 6",
-	"DC tag error type 1",
+	"DC Tag error type 6",
+	"DC Tag error type 1",
 	"Internal error type 1",
 	"Internal error type 2",
-	"Sys Read data error thread 0",
-	"Sys read data error thread 1",
-	"DC tag error type 2",
-	"DC data error type 1 (poison consumption)",
-	"DC data error type 2",
-	"DC data error type 3",
-	"DC tag error type 4",
-	"L2 TLB parity",
+	"System Read Data Error Thread 0",
+	"System Read Data Error Thread 1",
+	"DC Tag error type 2",
+	"DC Data error type 1 and poison consumption",
+	"DC Data error type 2",
+	"DC Data error type 3",
+	"DC Tag error type 4",
+	"Level 2 TLB parity error",
 	"PDC parity error",
-	"DC tag error type 3",
-	"DC tag error type 5",
-	"L2 fill data error",
+	"DC Tag error type 3",
+	"DC Tag error type 5",
+	"L2 Fill Data error",
 };
 
 static const char * const smca_if_mce_desc[] = {
-	"microtag probe port parity error",
-	"IC microtag or full tag multi-hit error",
-	"IC full tag parity",
-	"IC data array parity",
-	"Decoupling queue phys addr parity error",
-	"L0 ITLB parity error",
-	"L1 ITLB parity error",
-	"L2 ITLB parity error",
-	"BPQ snoop parity on Thread 0",
-	"BPQ snoop parity on Thread 1",
-	"L1 BTB multi-match error",
-	"L2 BTB multi-match error",
-	"L2 Cache Response Poison error",
-	"System Read Data error",
+	"Op Cache Microtag Probe Port Parity Error",
+	"IC Microtag or Full Tag Multi-hit Error",
+	"IC Full Tag Parity Error",
+	"IC Data Array Parity Error",
+	"Decoupling Queue PhysAddr Parity Error",
+	"L0 ITLB Parity Error",
+	"L1 ITLB Parity Error",
+	"L2 ITLB Parity Error",
+	"BPQ Thread 0 Snoop Parity Error",
+	"BPQ Thread 1 Snoop Parity Error",
+	"L1 BTB Multi-Match Error",
+	"L2 BTB Multi-Match Error",
+	"L2 Cache Response Poison Error",
+	"System Read Data Error",
 };
 
 static const char * const smca_l2_mce_desc[] = {
-	"L2M tag multi-way-hit error",
-	"L2M tag ECC error",
-	"L2M data ECC error",
-	"HW assert",
+	"L2M Tag Multiple-Way-Hit error",
+	"L2M Tag or State Array ECC Error",
+	"L2M Data Array ECC Error",
+	"Hardware Assert Error",
 };
 
 static const char * const smca_de_mce_desc[] = {
-	"uop cache tag parity error",
-	"uop cache data parity error",
-	"Insn buffer parity error",
-	"uop queue parity error",
-	"Insn dispatch queue parity error",
-	"Fetch address FIFO parity",
-	"Patch RAM data parity",
-	"Patch RAM sequencer parity",
-	"uop buffer parity"
+	"Micro-op cache tag parity error",
+	"Micro-op cache data parity error",
+	"Instruction buffer parity error",
+	"Micro-op queue parity error",
+	"Instruction dispatch queue parity error",
+	"Fetch address FIFO parity error",
+	"Patch RAM data parity error",
+	"Patch RAM sequencer parity error",
+	"Micro-op buffer parity error"
 };
 
 static const char * const smca_ex_mce_desc[] = {
-	"Watchdog timeout error",
-	"Phy register file parity",
-	"Flag register file parity",
-	"Immediate displacement register file parity",
-	"Address generator payload parity",
-	"EX payload parity",
-	"Checkpoint queue parity",
-	"Retire dispatch queue parity",
+	"Watchdog Timeout error",
+	"Physical register file parity error",
+	"Flag register file parity error",
+	"Immediate displacement register file parity error",
+	"Address generator payload parity error",
+	"EX payload parity error",
+	"Checkpoint queue parity error",
+	"Retire dispatch queue parity error",
 	"Retire status queue parity error",
 	"Scheduling queue parity error",
 	"Branch buffer queue parity error",
@@ -226,36 +226,36 @@ static const char * const smca_ex_mce_desc[] = {
 };
 
 static const char * const smca_fp_mce_desc[] = {
-	"Physical register file parity",
-	"Freelist parity error",
-	"Schedule queue parity",
+	"Physical register file (PRF) parity error",
+	"Freelist (FL) parity error",
+	"Schedule queue parity error",
 	"NSQ parity error",
-	"Retire queue parity",
-	"Status register file parity",
+	"Retire queue (RQ) parity error",
+	"Status register file (SRF) parity error",
 	"Hardware assertion",
 };
 
 static const char * const smca_l3_mce_desc[] = {
-	"Shadow tag macro ECC error",
-	"Shadow tag macro multi-way-hit error",
-	"L3M tag ECC error",
-	"L3M tag multi-way-hit error",
-	"L3M data ECC error",
-	"XI parity, L3 fill done channel error",
-	"L3 victim queue parity",
-	"L3 HW assert",
+	"Shadow Tag Macro ECC Error",
+	"Shadow Tag Macro Multi-way-hit Error",
+	"L3M Tag ECC Error",
+	"L3M Tag Multi-way-hit Error",
+	"L3M Data ECC Error",
+	"SDP Parity Error or SystemReadDataError from XI",
+	"L3 Victim Queue Parity Error",
+	"L3 Hardware Assertion",
 };
 
 static const char * const smca_cs_mce_desc[] = {
-	"Illegal request from transport layer",
-	"Address violation",
-	"Security violation",
-	"Illegal response from transport layer",
-	"Unexpected response",
-	"Parity error on incoming request or probe response data",
-	"Parity error on incoming read response data",
-	"Atomic request parity",
-	"ECC error on probe filter access",
+	"Illegal Request",
+	"Address Violation",
+	"Security Violation",
+	"Illegal Response",
+	"Unexpected Response",
+	"Request or Probe Parity Error",
+	"Read Response Parity Error",
+	"Atomic Request Parity Error",
+	"Probe Filter ECC Error",
 };
 
 static const char * const smca_cs2_mce_desc[] = {
@@ -276,30 +276,30 @@ static const char * const smca_cs2_mce_desc[] = {
 };
 
 static const char * const smca_pie_mce_desc[] = {
-	"HW assert",
-	"Internal PIE register security violation",
-	"Error on GMI link",
-	"Poison data written to internal PIE register",
+	"Hardware Assert",
+	"Register security violation",
+	"Link Error",
+	"Poison data consumption",
 	"A deferred error was detected in the DF"
 };
 
 static const char * const smca_umc_mce_desc[] = {
 	"DRAM ECC error",
-	"Data poison error on DRAM",
+	"Data poison error",
 	"SDP parity error",
 	"Advanced peripheral bus error",
-	"Command/address parity error",
+	"Address/Command parity error",
 	"Write data CRC error",
 	"DCQ SRAM ECC error",
 	"AES SRAM ECC error",
 };
 
 static const char * const smca_pb_mce_desc[] = {
-	"Parameter Block RAM ECC error",
+	"An ECC error in the Parameter Block RAM array",
 };
 
 static const char * const smca_psp_mce_desc[] = {
-	"PSP RAM ECC or parity error",
+	"An ECC or parity error in a PSP RAM instance",
 };
 
 static const char * const smca_psp2_mce_desc[] = {
@@ -324,7 +324,7 @@ static const char * const smca_psp2_mce_desc[] = {
 };
 
 static const char * const smca_smu_mce_desc[] = {
-	"SMU RAM ECC or parity error",
+	"An ECC or parity error in an SMU RAM instance",
 };
 
 static const char * const smca_smu2_mce_desc[] = {
author maintainer
#9 lore raw

PATCH 5/5 EDAC, mce_amd: Print ExtErrorCode and description on a single line

In reply to Ghannam, Yazen

From: Yazen Ghannam <[email protected]>

Save a log line by printing the extended error code and the description on a single line. This is similar to how errors are printed in other subsystems, e.g. "#, description". If we don't have a valid description then only the number/code is printed.

---
 drivers/edac/mce_amd.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/edac/mce_amd.c +2 -3
index 7e29ceabdf6f..f286b880f981 100644
@@ -965,13 +965,12 @@ static void decode_smca_error(struct mce *m)
 
 	ip_name = smca_get_long_name(bank_type);
 
-	pr_emerg(HW_ERR "%s Extended Error Code: %d\n", ip_name, xec);
+	pr_emerg(HW_ERR "%s Ext. Error Code: %d", ip_name, xec);
 
 	/* Only print the decode of valid error codes */
 	if (xec < smca_mce_descs[bank_type].num_descs &&
 			(hwid->xec_bitmap & BIT_ULL(xec))) {
-		pr_emerg(HW_ERR "%s Error: ", ip_name);
-		pr_cont("%s.\n", smca_mce_descs[bank_type].descs[xec]);
+		pr_cont(", %s.\n", smca_mce_descs[bank_type].descs[xec]);
 	}
 
 	if (bank_type == SMCA_UMC && xec == 0 && decode_dram_ecc)
maintainer
#10 lore raw

Re: [PATCH 5/5] EDAC, mce_amd: Print ExtErrorCode and description on a single line

Quoted 19 lines · Yazen

From: Yazen Ghannam <[email protected]>

Save a log line by printing the extended error code and the description on a single line. This is similar to how errors are printed in other subsystems, e.g. "#, description". If we don't have a valid description then only the number/code is printed.

---
 drivers/edac/mce_amd.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/edac/mce_amd.c +0 -0
index 7e29ceabdf6f..f286b880f981 100644
@@ -965,13 +965,12 @@ static void decode_smca_error(struct mce *m)
 
 	ip_name = smca_get_long_name(bank_type);

drivers/edac/mce_amd.c static void decode_smca_error(struct mce *m) · line 973

Quoted 10 lines
drivers/edac/mce_amd.c +2 -3
 
-	pr_emerg(HW_ERR "%s Extended Error Code: %d\n", ip_name, xec);
+	pr_emerg(HW_ERR "%s Ext. Error Code: %d", ip_name, xec);
 
 	/* Only print the decode of valid error codes */
 	if (xec < smca_mce_descs[bank_type].num_descs &&
 			(hwid->xec_bitmap & BIT_ULL(xec))) {
-		pr_emerg(HW_ERR "%s Error: ", ip_name);
-		pr_cont("%s.\n", smca_mce_descs[bank_type].descs[xec]);
+		pr_cont(", %s.\n", smca_mce_descs[bank_type].descs[xec]);

If the if-condition doesn't hit, we never print the \n

author maintainer
#11 lore raw

RE: [PATCH 5/5] EDAC, mce_amd: Print ExtErrorCode and description on a single line

Quoted 33 lines

-----Original Message-----
From: Borislav Petkov <[email protected]>
Sent: Sunday, February 3, 2019 6:22 AM
To: Ghannam, Yazen <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH 5/5] EDAC, mce_amd: Print ExtErrorCode and description on a single line

Quoted 23 lines · Yazen

From: Yazen Ghannam <[email protected]>

Save a log line by printing the extended error code and the description on a single line. This is similar to how errors are printed in other subsystems, e.g. "#, description". If we don't have a valid description then only the number/code is printed.

---
 drivers/edac/mce_amd.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/edac/mce_amd.c +1 -1
index 7e29ceabdf6f..f286b880f981 100644
@@ -965,13 +965,12 @@ static void decode_smca_error(struct mce *m)
 
 	ip_name = smca_get_long_name(bank_type);
 
-	pr_emerg(HW_ERR "%s Extended Error Code: %d\n", ip_name, xec);
+	pr_emerg(HW_ERR "%s Ext. Error Code: %d", ip_name, xec);
 
Quoted 9 lines

drivers/edac/mce_amd.c static void decode_smca_error(struct mce *m) · line 973

Quoted 6 lines
drivers/edac/mce_amd.c +1 -2
 	/* Only print the decode of valid error codes */
 	if (xec < smca_mce_descs[bank_type].num_descs &&
 			(hwid->xec_bitmap & BIT_ULL(xec))) {
-		pr_emerg(HW_ERR "%s Error: ", ip_name);
-		pr_cont("%s.\n", smca_mce_descs[bank_type].descs[xec]);
+		pr_cont(", %s.\n", smca_mce_descs[bank_type].descs[xec]);

If the if-condition doesn't hit, we never print the \n

Yes, you're right. But it seems that the next pr_* that's not a pr_cont will be on a newline automatically.

Should I add an explicit newline just to be sure we get one?

Thanks,
Yazen

maintainer
#12 lore raw

Re: [PATCH 5/5] EDAC, mce_amd: Print ExtErrorCode and description on a single line

Quoted 2 lines · Yazen

Yes, you're right. But it seems that the next pr_* that's not a pr_cont will be on a newline automatically.

Ah, that must be that printk continuation fun around

4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")

Quoted 1 line

Should I add an explicit newline just to be sure we get one?

Nah, no need. If anything, we should strive to get rid of KERN_CONT, if possible.

Thx.

#13 lore raw

[tip:ras/core] EDAC, mce_amd: Print ExtErrorCode and description on a single line

In reply to Ghannam, Yazen
EDAC, mce_amd: Print ExtErrorCode and description on a single line
Commit-ID:  1c1522d32ac49065f88e5a8b3d6e3a5613b20118
Gitweb:     https://git.kernel.org/tip/1c1522d32ac49065f88e5a8b3d6e3a5613b20118
Author:     Yazen Ghannam <[email protected]>
AuthorDate: Fri, 1 Feb 2019 22:55:54 +0000
Committer:  Borislav Petkov <[email protected]>
CommitDate: Mon, 4 Feb 2019 19:29:13 +0100

EDAC, mce_amd: Print ExtErrorCode and description on a single line

Save a log line by printing the extended error code and the description on a single line. This is similar to how errors are printed in other subsystems, e.g. "#, description". If we don't have a valid description then only the number/code is printed.

---
 drivers/edac/mce_amd.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/edac/mce_amd.c +2 -3
index 7e29ceabdf6f..f286b880f981 100644
@@ -965,13 +965,12 @@ static void decode_smca_error(struct mce *m)
 
 	ip_name = smca_get_long_name(bank_type);
 
-	pr_emerg(HW_ERR "%s Extended Error Code: %d\n", ip_name, xec);
+	pr_emerg(HW_ERR "%s Ext. Error Code: %d", ip_name, xec);
 
 	/* Only print the decode of valid error codes */
 	if (xec < smca_mce_descs[bank_type].num_descs &&
 			(hwid->xec_bitmap & BIT_ULL(xec))) {
-		pr_emerg(HW_ERR "%s Error: ", ip_name);
-		pr_cont("%s.\n", smca_mce_descs[bank_type].descs[xec]);
+		pr_cont(", %s.\n", smca_mce_descs[bank_type].descs[xec]);
 	}
 
 	if (bank_type == SMCA_UMC && xec == 0 && decode_dram_ecc)