Skip to contentSkip to conversation

perf, tools: Output running time and run/enabled ratio in CSV mode

PATCH In review Andi Kleen 4 participants 7 messages Mar 11, 2015 – Mar 14, 2015 perf events

lore
Share & tools
lore

Andi Kleen

author
#0 lore raw

PATCH 1/3 perf, tools: Output running time and run/enabled ratio in CSV mode

From: Andi Kleen <[email protected]>

The information how much a counter ran in perf stat can be quite interesting for other tools to judge how trustworthy a measurement is.

Currently it is only output in non CSV mode.

This patches make perf stat always output the running time and the enabled/running ratio in CSV mode.

This adds two new fields at the end for each line. I assume that existing tools ignore new fields at the end, so it's on by default.

Only CSV mode is affected, no difference otherwise.

v2: Add extra print_running function
v3: Avoid printing nan
v4: Remove some elses and add brackets.
v5: Move non CSV case into print_running

---
 tools/perf/builtin-stat.c | 47 ++++++++++++++++++++++++-----------------------
 1 file changed, 24 insertions(+), 23 deletions(-)
tools/perf/builtin-stat.c +24 -23
index d28949d..765e220 100644
@@ -769,6 +769,18 @@ static int run_perf_stat(int argc, const char **argv)
 	return ret;
 }
 
+static void print_running(u64 run, u64 ena)
+{
+	if (csv_output) {
+		fprintf(output, "%s%" PRIu64 "%s%.2f",
+					csv_sep,
+					run,
+					csv_sep,
+					ena ? 100.0 * run / ena : 100.0);
+	} else if (run != ena)
+		fprintf(output, "  (%.2f%%)", 100.0 * run / ena);
+}
+
 static void print_noise_pct(double total, double avg)
 {
 	double pct = rel_stddev_stats(total, avg);
@@ -1252,6 +1264,7 @@ static void print_aggr(char *prefix)
 					fprintf(output, "%s%s",
 						csv_sep, counter->cgrp->name);
 
+				print_running(run, ena);
 				fputc('\n', output);
 				continue;
 			}
@@ -1262,13 +1275,10 @@ static void print_aggr(char *prefix)
 			else
 				abs_printout(id, nr, counter, uval);
 
-			if (!csv_output) {
+			if (!csv_output)
 				print_noise(counter, 1.0);
 
-				if (run != ena)
-					fprintf(output, "  (%.2f%%)",
-						100.0 * run / ena);
-			}
+			print_running(run, ena);
 			fputc('\n', output);
 		}
 	}
@@ -1284,6 +1294,10 @@ static void print_counter_aggr(struct perf_evsel *counter, char *prefix)
 	double avg = avg_stats(&ps->res_stats[0]);
 	int scaled = counter->counts->scaled;
 	double uval;
+	double avg_enabled, avg_running;
+
+	avg_enabled = avg_stats(&ps->res_stats[1]);
+	avg_running = avg_stats(&ps->res_stats[2]);
 
 	if (prefix)
 		fprintf(output, "%s", prefix);
@@ -1303,6 +1317,7 @@ static void print_counter_aggr(struct perf_evsel *counter, char *prefix)
 		if (counter->cgrp)
 			fprintf(output, "%s%s", csv_sep, counter->cgrp->name);
 
+		print_running(avg_running, avg_enabled);
 		fputc('\n', output);
 		return;
 	}
@@ -1316,19 +1331,7 @@ static void print_counter_aggr(struct perf_evsel *counter, char *prefix)
 
 	print_noise(counter, avg);
 
-	if (csv_output) {
-		fputc('\n', output);
-		return;
-	}
-
-	if (scaled) {
-		double avg_enabled, avg_running;
-
-		avg_enabled = avg_stats(&ps->res_stats[1]);
-		avg_running = avg_stats(&ps->res_stats[2]);
-
-		fprintf(output, " [%5.2f%%]", 100 * avg_running / avg_enabled);
-	}
+	print_running(avg_running, avg_enabled);
 	fprintf(output, "\n");
 }
 
@@ -1370,6 +1373,7 @@ static void print_counter(struct perf_evsel *counter, char *prefix)
 				fprintf(output, "%s%s",
 					csv_sep, counter->cgrp->name);
 
+			print_running(run, ena);
 			fputc('\n', output);
 			continue;
 		}
@@ -1381,13 +1385,10 @@ static void print_counter(struct perf_evsel *counter, char *prefix)
 		else
 			abs_printout(cpu, 0, counter, uval);
 
-		if (!csv_output) {
+		if (!csv_output)
 			print_noise(counter, 1.0);
+		print_running(run, ena);
 
-			if (run != ena)
-				fprintf(output, "  (%.2f%%)",
-					100.0 * run / ena);
-		}
 		fputc('\n', output);
 	}
 }
Signature · 1 line
1.9.3
author
#1 lore raw

PATCH 2/3 perf, tools, stat: Fix IPC and other formulas with -A

From: Andi Kleen <[email protected]>

perf stat didn't compute the IPC and other formulas for individual CPUs with -A. Fix this for the easy -A case. As before, --per-core and --per-socket do not handle it, they simply print nothing.

---
 tools/perf/builtin-stat.c | 36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)
tools/perf/builtin-stat.c +19 -17
index 765e220..e78c68d 100644
@@ -353,39 +353,40 @@ static struct perf_evsel *nth_evsel(int n)
  * more semantic information such as miss/hit ratios,
  * instruction rates, etc:
  */
-static void update_shadow_stats(struct perf_evsel *counter, u64 *count)
+static void update_shadow_stats(struct perf_evsel *counter, u64 *count,
+				int cpu)
 {
 	if (perf_evsel__match(counter, SOFTWARE, SW_TASK_CLOCK))
-		update_stats(&runtime_nsecs_stats[0], count[0]);
+		update_stats(&runtime_nsecs_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES))
-		update_stats(&runtime_cycles_stats[0], count[0]);
+		update_stats(&runtime_cycles_stats[cpu], count[0]);
 	else if (transaction_run &&
 		 perf_evsel__cmp(counter, nth_evsel(T_CYCLES_IN_TX)))
-		update_stats(&runtime_cycles_in_tx_stats[0], count[0]);
+		update_stats(&runtime_cycles_in_tx_stats[cpu], count[0]);
 	else if (transaction_run &&
 		 perf_evsel__cmp(counter, nth_evsel(T_TRANSACTION_START)))
-		update_stats(&runtime_transaction_stats[0], count[0]);
+		update_stats(&runtime_transaction_stats[cpu], count[0]);
 	else if (transaction_run &&
 		 perf_evsel__cmp(counter, nth_evsel(T_ELISION_START)))
-		update_stats(&runtime_elision_stats[0], count[0]);
+		update_stats(&runtime_elision_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_FRONTEND))
-		update_stats(&runtime_stalled_cycles_front_stats[0], count[0]);
+		update_stats(&runtime_stalled_cycles_front_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_BACKEND))
-		update_stats(&runtime_stalled_cycles_back_stats[0], count[0]);
+		update_stats(&runtime_stalled_cycles_back_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS))
-		update_stats(&runtime_branches_stats[0], count[0]);
+		update_stats(&runtime_branches_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HARDWARE, HW_CACHE_REFERENCES))
-		update_stats(&runtime_cacherefs_stats[0], count[0]);
+		update_stats(&runtime_cacherefs_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_L1D))
-		update_stats(&runtime_l1_dcache_stats[0], count[0]);
+		update_stats(&runtime_l1_dcache_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_L1I))
-		update_stats(&runtime_l1_icache_stats[0], count[0]);
+		update_stats(&runtime_l1_icache_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_LL))
-		update_stats(&runtime_ll_cache_stats[0], count[0]);
+		update_stats(&runtime_ll_cache_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_DTLB))
-		update_stats(&runtime_dtlb_cache_stats[0], count[0]);
+		update_stats(&runtime_dtlb_cache_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_ITLB))
-		update_stats(&runtime_itlb_cache_stats[0], count[0]);
+		update_stats(&runtime_itlb_cache_stats[cpu], count[0]);
 }
 
 static void zero_per_pkg(struct perf_evsel *counter)
@@ -447,7 +448,8 @@ static int read_cb(struct perf_evsel *evsel, int cpu, int thread __maybe_unused,
 			perf_evsel__compute_deltas(evsel, cpu, count);
 		perf_counts_values__scale(count, scale, NULL);
 		evsel->counts->cpu[cpu] = *count;
-		update_shadow_stats(evsel, count->values);
+		if (aggr_mode == AGGR_NONE)
+			update_shadow_stats(evsel, count->values, cpu);
 		break;
 	case AGGR_GLOBAL:
 		aggr->val += count->val;
@@ -495,7 +497,7 @@ static int read_counter_aggr(struct perf_evsel *counter)
 	/*
 	 * Save the full runtime - to allow normalization during printout:
 	 */
-	update_shadow_stats(counter, count);
+	update_shadow_stats(counter, count, 0);
 
 	return 0;
 }
Signature · 1 line
1.9.3
#2 lore raw

[tip:perf/core] perf stat: Fix IPC and other formulas with -A

perf stat: Fix IPC and other formulas with -A
Commit-ID:  56f0fd45d8df51542930b9b2e1acee5034b53479
Gitweb:     http://git.kernel.org/tip/56f0fd45d8df51542930b9b2e1acee5034b53479
Author:     Andi Kleen <[email protected]>
AuthorDate: Wed, 11 Mar 2015 08:28:01 -0700
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Fri, 13 Mar 2015 07:46:10 -0300

perf stat: Fix IPC and other formulas with -A

perf stat didn't compute the IPC and other formulas for individual CPUs with -A. Fix this for the easy -A case. As before, --per-core and --per-socket do not handle it, they simply print nothing.

---
 tools/perf/builtin-stat.c | 36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)
tools/perf/builtin-stat.c +19 -17
index d58e50c..c95dbda 100644
@@ -353,39 +353,40 @@ static struct perf_evsel *nth_evsel(int n)
  * more semantic information such as miss/hit ratios,
  * instruction rates, etc:
  */
-static void update_shadow_stats(struct perf_evsel *counter, u64 *count)
+static void update_shadow_stats(struct perf_evsel *counter, u64 *count,
+				int cpu)
 {
 	if (perf_evsel__match(counter, SOFTWARE, SW_TASK_CLOCK))
-		update_stats(&runtime_nsecs_stats[0], count[0]);
+		update_stats(&runtime_nsecs_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES))
-		update_stats(&runtime_cycles_stats[0], count[0]);
+		update_stats(&runtime_cycles_stats[cpu], count[0]);
 	else if (transaction_run &&
 		 perf_evsel__cmp(counter, nth_evsel(T_CYCLES_IN_TX)))
-		update_stats(&runtime_cycles_in_tx_stats[0], count[0]);
+		update_stats(&runtime_cycles_in_tx_stats[cpu], count[0]);
 	else if (transaction_run &&
 		 perf_evsel__cmp(counter, nth_evsel(T_TRANSACTION_START)))
-		update_stats(&runtime_transaction_stats[0], count[0]);
+		update_stats(&runtime_transaction_stats[cpu], count[0]);
 	else if (transaction_run &&
 		 perf_evsel__cmp(counter, nth_evsel(T_ELISION_START)))
-		update_stats(&runtime_elision_stats[0], count[0]);
+		update_stats(&runtime_elision_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_FRONTEND))
-		update_stats(&runtime_stalled_cycles_front_stats[0], count[0]);
+		update_stats(&runtime_stalled_cycles_front_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_BACKEND))
-		update_stats(&runtime_stalled_cycles_back_stats[0], count[0]);
+		update_stats(&runtime_stalled_cycles_back_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS))
-		update_stats(&runtime_branches_stats[0], count[0]);
+		update_stats(&runtime_branches_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HARDWARE, HW_CACHE_REFERENCES))
-		update_stats(&runtime_cacherefs_stats[0], count[0]);
+		update_stats(&runtime_cacherefs_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_L1D))
-		update_stats(&runtime_l1_dcache_stats[0], count[0]);
+		update_stats(&runtime_l1_dcache_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_L1I))
-		update_stats(&runtime_l1_icache_stats[0], count[0]);
+		update_stats(&runtime_l1_icache_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_LL))
-		update_stats(&runtime_ll_cache_stats[0], count[0]);
+		update_stats(&runtime_ll_cache_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_DTLB))
-		update_stats(&runtime_dtlb_cache_stats[0], count[0]);
+		update_stats(&runtime_dtlb_cache_stats[cpu], count[0]);
 	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_ITLB))
-		update_stats(&runtime_itlb_cache_stats[0], count[0]);
+		update_stats(&runtime_itlb_cache_stats[cpu], count[0]);
 }
 
 static void zero_per_pkg(struct perf_evsel *counter)
@@ -447,7 +448,8 @@ static int read_cb(struct perf_evsel *evsel, int cpu, int thread __maybe_unused,
 			perf_evsel__compute_deltas(evsel, cpu, count);
 		perf_counts_values__scale(count, scale, NULL);
 		evsel->counts->cpu[cpu] = *count;
-		update_shadow_stats(evsel, count->values);
+		if (aggr_mode == AGGR_NONE)
+			update_shadow_stats(evsel, count->values, cpu);
 		break;
 	case AGGR_GLOBAL:
 		aggr->val += count->val;
@@ -495,7 +497,7 @@ static int read_counter_aggr(struct perf_evsel *counter)
 	/*
 	 * Save the full runtime - to allow normalization during printout:
 	 */
-	update_shadow_stats(counter, count);
+	update_shadow_stats(counter, count, 0);
 
 	return 0;
 }
author
#3 lore raw

PATCH 3/3 perf, tools, stat: Always correctly indent ratio column

In reply to Andi Kleen

From: Andi Kleen <[email protected]>

When cycles or instructions do not print anything, as in being, --per-socket or --per-core modi, the ratio column was not correctly indented for them. This lead to some ratios not lining up with the others. Always indent correctly when nothing is printed.

---
 tools/perf/builtin-stat.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
tools/perf/builtin-stat.c +4 -2
index e78c68d..41b296f 100644
@@ -1093,7 +1093,8 @@ static void abs_printout(int id, int nr, struct perf_evsel *evsel, double avg)
 		if (total) {
 			ratio = avg / total;
 			fprintf(output, " #   %5.2f  insns per cycle        ", ratio);
-		}
+		} else
+			fprintf(output, "                                   ");
 		total = avg_stats(&runtime_stalled_cycles_front_stats[cpu]);
 		total = max(total, avg_stats(&runtime_stalled_cycles_back_stats[cpu]));
 
@@ -1162,7 +1163,8 @@ static void abs_printout(int id, int nr, struct perf_evsel *evsel, double avg)
 		if (total) {
 			ratio = avg / total;
 			fprintf(output, " # %8.3f GHz                    ", ratio);
-		}
+		} else
+			fprintf(output, "                                   ");
 	} else if (transaction_run &&
 		   perf_evsel__cmp(evsel, nth_evsel(T_CYCLES_IN_TX))) {
 		total = avg_stats(&runtime_cycles_stats[cpu]);
Signature · 1 line
1.9.3
#4 lore raw

[tip:perf/core] perf stat: Always correctly indent ratio column

perf stat: Always correctly indent ratio column
Commit-ID:  7910352852f377f6d12286f922299d7ad1cfb2e3
Gitweb:     http://git.kernel.org/tip/7910352852f377f6d12286f922299d7ad1cfb2e3
Author:     Andi Kleen <[email protected]>
AuthorDate: Wed, 11 Mar 2015 08:28:02 -0700
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Fri, 13 Mar 2015 07:47:44 -0300

perf stat: Always correctly indent ratio column

When cycles or instructions do not print anything, as in being, --per-socket or --per-core modi, the ratio column was not correctly indented for them. This lead to some ratios not lining up with the others. Always indent correctly when nothing is printed.

---
 tools/perf/builtin-stat.c | 4 ++++
 1 file changed, 4 insertions(+)
tools/perf/builtin-stat.c +4 -0
index c95dbda..d4d1b77 100644
@@ -1094,6 +1094,8 @@ static void abs_printout(int id, int nr, struct perf_evsel *evsel, double avg)
 		if (total) {
 			ratio = avg / total;
 			fprintf(output, " #   %5.2f  insns per cycle        ", ratio);
+		} else {
+			fprintf(output, "                                   ");
 		}
 		total = avg_stats(&runtime_stalled_cycles_front_stats[cpu]);
 		total = max(total, avg_stats(&runtime_stalled_cycles_back_stats[cpu]));
@@ -1163,6 +1165,8 @@ static void abs_printout(int id, int nr, struct perf_evsel *evsel, double avg)
 		if (total) {
 			ratio = avg / total;
 			fprintf(output, " # %8.3f GHz                    ", ratio);
+		} else {
+			fprintf(output, "                                   ");
 		}
 	} else if (transaction_run &&
 		   perf_evsel__cmp(evsel, nth_evsel(T_CYCLES_IN_TX))) {
#5 lore raw
In reply to Andi Kleen

Em Wed, Mar 11, 2015 at 08:28:00AM -0700, Andi Kleen escreveu:

Quoted 13 lines

From: Andi Kleen <[email protected]>

The information how much a counter ran in perf stat can be quite interesting for other tools to judge how trustworthy a measurement is.

Currently it is only output in non CSV mode.

This patches make perf stat always output the running time and the enabled/running ratio in CSV mode.

This adds two new fields at the end for each line. I assume that existing tools ignore new fields at the end, so it's on by default.

Quoted 7 lines

Only CSV mode is affected, no difference otherwise.

v2: Add extra print_running function
v3: Avoid printing nan
v4: Remove some elses and add brackets.
v5: Move non CSV case into print_running

Jiri, have you sent that "Reviewed-by" tag? Don't remember seeing it.

- Arnaldo

Quoted 118 lines
---
 tools/perf/builtin-stat.c | 47 ++++++++++++++++++++++++-----------------------
 1 file changed, 24 insertions(+), 23 deletions(-)
tools/perf/builtin-stat.c +24 -23
index d28949d..765e220 100644
@@ -769,6 +769,18 @@ static int run_perf_stat(int argc, const char **argv)
 	return ret;
 }
 
+static void print_running(u64 run, u64 ena)
+{
+	if (csv_output) {
+		fprintf(output, "%s%" PRIu64 "%s%.2f",
+					csv_sep,
+					run,
+					csv_sep,
+					ena ? 100.0 * run / ena : 100.0);
+	} else if (run != ena)
+		fprintf(output, "  (%.2f%%)", 100.0 * run / ena);
+}
+
 static void print_noise_pct(double total, double avg)
 {
 	double pct = rel_stddev_stats(total, avg);
@@ -1252,6 +1264,7 @@ static void print_aggr(char *prefix)
 					fprintf(output, "%s%s",
 						csv_sep, counter->cgrp->name);
 
+				print_running(run, ena);
 				fputc('\n', output);
 				continue;
 			}
@@ -1262,13 +1275,10 @@ static void print_aggr(char *prefix)
 			else
 				abs_printout(id, nr, counter, uval);
 
-			if (!csv_output) {
+			if (!csv_output)
 				print_noise(counter, 1.0);
 
-				if (run != ena)
-					fprintf(output, "  (%.2f%%)",
-						100.0 * run / ena);
-			}
+			print_running(run, ena);
 			fputc('\n', output);
 		}
 	}
@@ -1284,6 +1294,10 @@ static void print_counter_aggr(struct perf_evsel *counter, char *prefix)
 	double avg = avg_stats(&ps->res_stats[0]);
 	int scaled = counter->counts->scaled;
 	double uval;
+	double avg_enabled, avg_running;
+
+	avg_enabled = avg_stats(&ps->res_stats[1]);
+	avg_running = avg_stats(&ps->res_stats[2]);
 
 	if (prefix)
 		fprintf(output, "%s", prefix);
@@ -1303,6 +1317,7 @@ static void print_counter_aggr(struct perf_evsel *counter, char *prefix)
 		if (counter->cgrp)
 			fprintf(output, "%s%s", csv_sep, counter->cgrp->name);
 
+		print_running(avg_running, avg_enabled);
 		fputc('\n', output);
 		return;
 	}
@@ -1316,19 +1331,7 @@ static void print_counter_aggr(struct perf_evsel *counter, char *prefix)
 
 	print_noise(counter, avg);
 
-	if (csv_output) {
-		fputc('\n', output);
-		return;
-	}
-
-	if (scaled) {
-		double avg_enabled, avg_running;
-
-		avg_enabled = avg_stats(&ps->res_stats[1]);
-		avg_running = avg_stats(&ps->res_stats[2]);
-
-		fprintf(output, " [%5.2f%%]", 100 * avg_running / avg_enabled);
-	}
+	print_running(avg_running, avg_enabled);
 	fprintf(output, "\n");
 }
 
@@ -1370,6 +1373,7 @@ static void print_counter(struct perf_evsel *counter, char *prefix)
 				fprintf(output, "%s%s",
 					csv_sep, counter->cgrp->name);
 
+			print_running(run, ena);
 			fputc('\n', output);
 			continue;
 		}
@@ -1381,13 +1385,10 @@ static void print_counter(struct perf_evsel *counter, char *prefix)
 		else
 			abs_printout(cpu, 0, counter, uval);
 
-		if (!csv_output) {
+		if (!csv_output)
 			print_noise(counter, 1.0);
+		print_running(run, ena);
 
-			if (run != ena)
-				fprintf(output, "  (%.2f%%)",
-					100.0 * run / ena);
-		}
 		fputc('\n', output);
 	}
 }
Signature · 1 line
1.9.3
#6 lore raw
Quoted 16 lines · Arnaldo Carvalho de Melo

Em Wed, Mar 11, 2015 at 08:28:00AM -0700, Andi Kleen escreveu:

Quoted 15 lines

From: Andi Kleen <[email protected]>

The information how much a counter ran in perf stat can be quite interesting for other tools to judge how trustworthy a measurement is.

Currently it is only output in non CSV mode.

This patches make perf stat always output the running time and the enabled/running ratio in CSV mode.

This adds two new fields at the end for each line. I assume that existing tools ignore new fields at the end, so it's on by default.

Only CSV mode is affected, no difference otherwise.

Quoted 7 lines
Quoted 5 lines

v2: Add extra print_running function
v3: Avoid printing nan
v4: Remove some elses and add brackets.
v5: Move non CSV case into print_running

Jiri, have you sent that "Reviewed-by" tag? Don't remember seeing it.

I might have, but can't find it now..
anyway there's new version, I'll check it

jirka