Skip to contentSkip to conversation

perf tools: Remove event types data

PATCH Applied Jiri Olsa 4 participants 13 messages Jul 11, 2013 – Jul 19, 2013 perf events

lore
Share & tools
lore

Jiri Olsa

author
#0 lore raw

v2 cover perf tools: Remove event types data

hi,
following up on the 'perf timechart' FIXME note and changing its tracepoint match not to use event types data.

Original RFC sent here:
http://marc.info/?l=linux-kernel&m=137344263513417&w=2

v2 changes:
- using tracepoints haler callbacks to get power data in timechart command (patch 2)
- separating enum removal of 'enum trace_flag_type'

    (patch 1)

Again, timechart (and perf.data) tests look ok, but would appreciate another tester ;-).

It's reachable here:
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
perf/et2

thanks,
jirka

Cc Arnaldo Carvalho de Melo <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Corey Ashford <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc David Ahern <[email protected]>
Cc Thomas Renninger <[email protected]>
---
 tools/perf/builtin-inject.c    |   7 ----
 tools/perf/builtin-record.c    |  13 --------
 tools/perf/builtin-report.c    |   1 -
 tools/perf/builtin-script.c    |   1 -
 tools/perf/builtin-timechart.c | 176 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------------------------------
 tools/perf/util/event.h        |   2 +-
 tools/perf/util/header.c       | 118 +------------------------------------------------------------------
 tools/perf/util/header.h       |  16 +---------
 tools/perf/util/session.c      |  11 -------
 tools/perf/util/tool.h         |   3 --
 10 files changed, 102 insertions(+), 246 deletions(-)
author
#1 lore raw

PATCH v2 1/5 perf tools: Add traceevent lib event-parse.h include to timechart

Adding traceevent lib event-parse.h include to timechart command and removing duplicated local 'enum trace_flag_type' definition.

Cc Arnaldo Carvalho de Melo <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Corey Ashford <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc David Ahern <[email protected]>
Cc Thomas Renninger <[email protected]>
---
 tools/perf/builtin-timechart.c | 21 ++-------------------
 1 file changed, 2 insertions(+), 19 deletions(-)
tools/perf/builtin-timechart.c +2 -19
index 4536a92..a512009 100644
@@ -12,6 +12,8 @@
  * of the License.
  */
 
+#include <traceevent/event-parse.h>
+
 #include "builtin.h"
 
 #include "util/util.h"
@@ -328,25 +330,6 @@ struct wakeup_entry {
 	int   success;
 };
 
-/*
- * trace_flag_type is an enumeration that holds different
- * states when a trace occurs. These are:
- *  IRQS_OFF            - interrupts were disabled
- *  IRQS_NOSUPPORT      - arch does not support irqs_disabled_flags
- *  NEED_RESCED         - reschedule is requested
- *  HARDIRQ             - inside an interrupt handler
- *  SOFTIRQ             - inside a softirq handler
- */
-enum trace_flag_type {
-	TRACE_FLAG_IRQS_OFF		= 0x01,
-	TRACE_FLAG_IRQS_NOSUPPORT	= 0x02,
-	TRACE_FLAG_NEED_RESCHED		= 0x04,
-	TRACE_FLAG_HARDIRQ		= 0x08,
-	TRACE_FLAG_SOFTIRQ		= 0x10,
-};
-
-
-
 struct sched_switch {
 	struct trace_entry te;
 	char prev_comm[TASK_COMM_LEN];
Signature · 1 line
1.7.11.7
#2 lore raw

[tip:perf/core] perf timechart: Use traceevent lib event-parse.h include

perf timechart: Use traceevent lib event-parse.h include
Commit-ID:  c85cffa5894fad8ad7c8051ccf7dd73a3a3f92b6
Gitweb:     http://git.kernel.org/tip/c85cffa5894fad8ad7c8051ccf7dd73a3a3f92b6
Author:     Jiri Olsa <[email protected]>
AuthorDate: Thu, 11 Jul 2013 17:28:29 +0200
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 15 Jul 2013 16:09:07 -0300

perf timechart: Use traceevent lib event-parse.h include

Adding traceevent lib event-parse.h include to timechart command and removing duplicated local 'enum trace_flag_type' definition.

---
 tools/perf/builtin-timechart.c | 21 ++-------------------
 1 file changed, 2 insertions(+), 19 deletions(-)
tools/perf/builtin-timechart.c +2 -19
index 4536a92..a512009 100644
@@ -12,6 +12,8 @@
  * of the License.
  */
 
+#include <traceevent/event-parse.h>
+
 #include "builtin.h"
 
 #include "util/util.h"
@@ -328,25 +330,6 @@ struct wakeup_entry {
 	int   success;
 };
 
-/*
- * trace_flag_type is an enumeration that holds different
- * states when a trace occurs. These are:
- *  IRQS_OFF            - interrupts were disabled
- *  IRQS_NOSUPPORT      - arch does not support irqs_disabled_flags
- *  NEED_RESCED         - reschedule is requested
- *  HARDIRQ             - inside an interrupt handler
- *  SOFTIRQ             - inside a softirq handler
- */
-enum trace_flag_type {
-	TRACE_FLAG_IRQS_OFF		= 0x01,
-	TRACE_FLAG_IRQS_NOSUPPORT	= 0x02,
-	TRACE_FLAG_NEED_RESCHED		= 0x04,
-	TRACE_FLAG_HARDIRQ		= 0x08,
-	TRACE_FLAG_SOFTIRQ		= 0x10,
-};
-
-
-
 struct sched_switch {
 	struct trace_entry te;
 	char prev_comm[TASK_COMM_LEN];
author
#3 lore raw

PATCH v2 2/5 perf tools: Remove event types framework only user

In reply to Jiri Olsa

The only user of the event types data is 'perf timechart' command and uses this info to identify proper tracepoints based on its name.

Switching this code to use tracepoint callbacks handlers same as another commands like builtin-{kmem,lock,sched}.c using the perf_session__set_tracepoints_handlers function.

This way we get rid of the only event types user and can remove them completely in next patches.

Cc Arnaldo Carvalho de Melo <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Corey Ashford <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc David Ahern <[email protected]>
Cc Thomas Renninger <[email protected]>
---
 tools/perf/builtin-timechart.c | 155 ++++++++++++++++++++++++++---------------
 1 file changed, 97 insertions(+), 58 deletions(-)
tools/perf/builtin-timechart.c +97 -58
index a512009..c2e0231 100644
@@ -21,6 +21,7 @@
 #include "util/color.h"
 #include <linux/list.h>
 #include "util/cache.h"
+#include "util/evlist.h"
 #include "util/evsel.h"
 #include <linux/rbtree.h>
 #include "util/symbol.h"
@@ -462,6 +463,8 @@ static void sched_switch(int cpu, u64 timestamp, struct trace_entry *te)
 	}
 }
 
+typedef int (*tracepoint_handler)(struct perf_evsel *evsel,
+				  struct perf_sample *sample);
 
 static int process_sample_event(struct perf_tool *tool __maybe_unused,
 				union perf_event *event __maybe_unused,
@@ -469,8 +472,6 @@ static int process_sample_event(struct perf_tool *tool __maybe_unused,
 				struct perf_evsel *evsel,
 				struct machine *machine __maybe_unused)
 {
-	struct trace_entry *te;
-
 	if (evsel->attr.sample_type & PERF_SAMPLE_TIME) {
 		if (!first_time || first_time > sample->time)
 			first_time = sample->time;
@@ -478,69 +479,90 @@ static int process_sample_event(struct perf_tool *tool __maybe_unused,
 			last_time = sample->time;
 	}
 
-	te = (void *)sample->raw_data;
-	if ((evsel->attr.sample_type & PERF_SAMPLE_RAW) && sample->raw_size > 0) {
-		char *event_str;
-#ifdef SUPPORT_OLD_POWER_EVENTS
-		struct power_entry_old *peo;
-		peo = (void *)te;
-#endif
-		/*
-		 * FIXME: use evsel, its already mapped from id to perf_evsel,
-		 * remove perf_header__find_event infrastructure bits.
-		 * Mapping all these "power:cpu_idle" strings to the tracepoint
-		 * ID and then just comparing against evsel->attr.config.
-		 *
-		 * e.g.:
-		 *
-		 * if (evsel->attr.config == power_cpu_idle_id)
-		 */
-		event_str = perf_header__find_event(te->type);
-
-		if (!event_str)
-			return 0;
-
-		if (sample->cpu > numcpus)
-			numcpus = sample->cpu;
-
-		if (strcmp(event_str, "power:cpu_idle") == 0) {
-			struct power_processor_entry *ppe = (void *)te;
-			if (ppe->state == (u32)PWR_EVENT_EXIT)
-				c_state_end(ppe->cpu_id, sample->time);
-			else
-				c_state_start(ppe->cpu_id, sample->time,
-					      ppe->state);
-		}
-		else if (strcmp(event_str, "power:cpu_frequency") == 0) {
-			struct power_processor_entry *ppe = (void *)te;
-			p_state_change(ppe->cpu_id, sample->time, ppe->state);
-		}
+	if (sample->cpu > numcpus)
+		numcpus = sample->cpu;
+
+	if (evsel->handler.func != NULL) {
+		tracepoint_handler f = evsel->handler.func;
+		return f(evsel, sample);
+	}
+
+	return 0;
+}
+
+static int
+process_sample_cpu_idle(struct perf_evsel *evsel __maybe_unused,
+			struct perf_sample *sample)
+{
+	struct power_processor_entry *ppe = sample->raw_data;
+
+	if (ppe->state == (u32) PWR_EVENT_EXIT)
+		c_state_end(ppe->cpu_id, sample->time);
+	else
+		c_state_start(ppe->cpu_id, sample->time, ppe->state);
+	return 0;
+}
+
+static int
+process_sample_cpu_frequency(struct perf_evsel *evsel __maybe_unused,
+			     struct perf_sample *sample)
+{
+	struct power_processor_entry *ppe = sample->raw_data;
+
+	p_state_change(ppe->cpu_id, sample->time, ppe->state);
+	return 0;
+}
 
-		else if (strcmp(event_str, "sched:sched_wakeup") == 0)
-			sched_wakeup(sample->cpu, sample->time, sample->pid, te);
+static int
+process_sample_sched_wakeup(struct perf_evsel *evsel __maybe_unused,
+			    struct perf_sample *sample)
+{
+	struct trace_entry *te = sample->raw_data;
 
-		else if (strcmp(event_str, "sched:sched_switch") == 0)
-			sched_switch(sample->cpu, sample->time, te);
+	sched_wakeup(sample->cpu, sample->time, sample->pid, te);
+	return 0;
+}
+
+static int
+process_sample_sched_switch(struct perf_evsel *evsel __maybe_unused,
+			    struct perf_sample *sample)
+{
+	struct trace_entry *te = sample->raw_data;
+
+	sched_switch(sample->cpu, sample->time, te);
+	return 0;
+}
 
 #ifdef SUPPORT_OLD_POWER_EVENTS
-		if (use_old_power_events) {
-			if (strcmp(event_str, "power:power_start") == 0)
-				c_state_start(peo->cpu_id, sample->time,
-					      peo->value);
-
-			else if (strcmp(event_str, "power:power_end") == 0)
-				c_state_end(sample->cpu, sample->time);
-
-			else if (strcmp(event_str,
-					"power:power_frequency") == 0)
-				p_state_change(peo->cpu_id, sample->time,
-					       peo->value);
-		}
-#endif
-	}
+static int
+process_sample_power_start(struct perf_evsel *evsel __maybe_unused,
+			   struct perf_sample *sample)
+{
+	struct power_entry_old *peo = sample->raw_data;
+
+	c_state_start(peo->cpu_id, sample->time, peo->value);
 	return 0;
 }
 
+static int
+process_sample_power_end(struct perf_evsel *evsel __maybe_unused,
+			 struct perf_sample *sample)
+{
+	c_state_end(sample->cpu, sample->time);
+	return 0;
+}
+
+static int
+process_sample_power_frequency(struct perf_evsel *evsel __maybe_unused,
+			       struct perf_sample *sample)
+{
+	struct power_entry_old *peo = sample->raw_data;
+
+	p_state_change(peo->cpu_id, sample->time, peo->value);
+	return 0;
+}
+#endif /* SUPPORT_OLD_POWER_EVENTS */
+
 /*
  * After the last sample we need to wrap up the current C/P state
  * and close out each CPU for these.
@@ -957,6 +979,17 @@ static int __cmd_timechart(const char *output_name)
 		.sample		 = process_sample_event,
 		.ordered_samples = true,
 	};
+	const struct perf_evsel_str_handler power_tracepoints[] = {
+		{ "power:cpu_idle",		process_sample_cpu_idle },
+		{ "power:cpu_frequency",	process_sample_cpu_frequency },
+		{ "sched:sched_wakeup",		process_sample_sched_wakeup },
+		{ "sched:sched_switch",		process_sample_sched_switch },
+#ifdef SUPPORT_OLD_POWER_EVENTS
+		{ "power:power_start",		process_sample_power_start },
+		{ "power:power_end",		process_sample_power_end },
+		{ "power:power_frequency",	process_sample_power_frequency },
+#endif
+	};
 	struct perf_session *session = perf_session__new(input_name, O_RDONLY,
 							 0, false, &perf_timechart);
 	int ret = -EINVAL;
@@ -967,6 +1000,12 @@ static int __cmd_timechart(const char *output_name)
 	if (!perf_session__has_traces(session, "timechart record"))
 		goto out_delete;
 
+	if (perf_session__set_tracepoints_handlers(session,
+						   power_tracepoints)) {
+		pr_err("Initializing session tracepoint handlers failed\n");
+		goto out_delete;
+	}
+
 	ret = perf_session__process_events(session, &perf_timechart);
 	if (ret)
 		goto out_delete;
Signature · 1 line
1.7.11.7
#4 lore raw

[tip:perf/core] perf timechart: Remove event types framework only user

perf timechart: Remove event types framework only user
Commit-ID:  5936678e7da5f8d2944a2ad45d66c88b4a7ccb67
Gitweb:     http://git.kernel.org/tip/5936678e7da5f8d2944a2ad45d66c88b4a7ccb67
Author:     Jiri Olsa <[email protected]>
AuthorDate: Thu, 11 Jul 2013 17:28:30 +0200
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 15 Jul 2013 16:14:47 -0300

perf timechart: Remove event types framework only user

The only user of the event types data is 'perf timechart' command and uses this info to identify proper tracepoints based on its name.

Switching this code to use tracepoint callbacks handlers same as another commands like builtin-{kmem,lock,sched}.c using the perf_session__set_tracepoints_handlers function.

This way we get rid of the only event types user and can remove them completely in next patches.

---
 tools/perf/builtin-timechart.c | 155 ++++++++++++++++++++++++++---------------
 1 file changed, 97 insertions(+), 58 deletions(-)
tools/perf/builtin-timechart.c +97 -58
index a512009..c2e0231 100644
@@ -21,6 +21,7 @@
 #include "util/color.h"
 #include <linux/list.h>
 #include "util/cache.h"
+#include "util/evlist.h"
 #include "util/evsel.h"
 #include <linux/rbtree.h>
 #include "util/symbol.h"
@@ -462,6 +463,8 @@ static void sched_switch(int cpu, u64 timestamp, struct trace_entry *te)
 	}
 }
 
+typedef int (*tracepoint_handler)(struct perf_evsel *evsel,
+				  struct perf_sample *sample);
 
 static int process_sample_event(struct perf_tool *tool __maybe_unused,
 				union perf_event *event __maybe_unused,
@@ -469,8 +472,6 @@ static int process_sample_event(struct perf_tool *tool __maybe_unused,
 				struct perf_evsel *evsel,
 				struct machine *machine __maybe_unused)
 {
-	struct trace_entry *te;
-
 	if (evsel->attr.sample_type & PERF_SAMPLE_TIME) {
 		if (!first_time || first_time > sample->time)
 			first_time = sample->time;
@@ -478,69 +479,90 @@ static int process_sample_event(struct perf_tool *tool __maybe_unused,
 			last_time = sample->time;
 	}
 
-	te = (void *)sample->raw_data;
-	if ((evsel->attr.sample_type & PERF_SAMPLE_RAW) && sample->raw_size > 0) {
-		char *event_str;
-#ifdef SUPPORT_OLD_POWER_EVENTS
-		struct power_entry_old *peo;
-		peo = (void *)te;
-#endif
-		/*
-		 * FIXME: use evsel, its already mapped from id to perf_evsel,
-		 * remove perf_header__find_event infrastructure bits.
-		 * Mapping all these "power:cpu_idle" strings to the tracepoint
-		 * ID and then just comparing against evsel->attr.config.
-		 *
-		 * e.g.:
-		 *
-		 * if (evsel->attr.config == power_cpu_idle_id)
-		 */
-		event_str = perf_header__find_event(te->type);
-
-		if (!event_str)
-			return 0;
-
-		if (sample->cpu > numcpus)
-			numcpus = sample->cpu;
-
-		if (strcmp(event_str, "power:cpu_idle") == 0) {
-			struct power_processor_entry *ppe = (void *)te;
-			if (ppe->state == (u32)PWR_EVENT_EXIT)
-				c_state_end(ppe->cpu_id, sample->time);
-			else
-				c_state_start(ppe->cpu_id, sample->time,
-					      ppe->state);
-		}
-		else if (strcmp(event_str, "power:cpu_frequency") == 0) {
-			struct power_processor_entry *ppe = (void *)te;
-			p_state_change(ppe->cpu_id, sample->time, ppe->state);
-		}
+	if (sample->cpu > numcpus)
+		numcpus = sample->cpu;
+
+	if (evsel->handler.func != NULL) {
+		tracepoint_handler f = evsel->handler.func;
+		return f(evsel, sample);
+	}
+
+	return 0;
+}
+
+static int
+process_sample_cpu_idle(struct perf_evsel *evsel __maybe_unused,
+			struct perf_sample *sample)
+{
+	struct power_processor_entry *ppe = sample->raw_data;
+
+	if (ppe->state == (u32) PWR_EVENT_EXIT)
+		c_state_end(ppe->cpu_id, sample->time);
+	else
+		c_state_start(ppe->cpu_id, sample->time, ppe->state);
+	return 0;
+}
+
+static int
+process_sample_cpu_frequency(struct perf_evsel *evsel __maybe_unused,
+			     struct perf_sample *sample)
+{
+	struct power_processor_entry *ppe = sample->raw_data;
+
+	p_state_change(ppe->cpu_id, sample->time, ppe->state);
+	return 0;
+}
 
-		else if (strcmp(event_str, "sched:sched_wakeup") == 0)
-			sched_wakeup(sample->cpu, sample->time, sample->pid, te);
+static int
+process_sample_sched_wakeup(struct perf_evsel *evsel __maybe_unused,
+			    struct perf_sample *sample)
+{
+	struct trace_entry *te = sample->raw_data;
 
-		else if (strcmp(event_str, "sched:sched_switch") == 0)
-			sched_switch(sample->cpu, sample->time, te);
+	sched_wakeup(sample->cpu, sample->time, sample->pid, te);
+	return 0;
+}
+
+static int
+process_sample_sched_switch(struct perf_evsel *evsel __maybe_unused,
+			    struct perf_sample *sample)
+{
+	struct trace_entry *te = sample->raw_data;
+
+	sched_switch(sample->cpu, sample->time, te);
+	return 0;
+}
 
 #ifdef SUPPORT_OLD_POWER_EVENTS
-		if (use_old_power_events) {
-			if (strcmp(event_str, "power:power_start") == 0)
-				c_state_start(peo->cpu_id, sample->time,
-					      peo->value);
-
-			else if (strcmp(event_str, "power:power_end") == 0)
-				c_state_end(sample->cpu, sample->time);
-
-			else if (strcmp(event_str,
-					"power:power_frequency") == 0)
-				p_state_change(peo->cpu_id, sample->time,
-					       peo->value);
-		}
-#endif
-	}
+static int
+process_sample_power_start(struct perf_evsel *evsel __maybe_unused,
+			   struct perf_sample *sample)
+{
+	struct power_entry_old *peo = sample->raw_data;
+
+	c_state_start(peo->cpu_id, sample->time, peo->value);
 	return 0;
 }
 
+static int
+process_sample_power_end(struct perf_evsel *evsel __maybe_unused,
+			 struct perf_sample *sample)
+{
+	c_state_end(sample->cpu, sample->time);
+	return 0;
+}
+
+static int
+process_sample_power_frequency(struct perf_evsel *evsel __maybe_unused,
+			       struct perf_sample *sample)
+{
+	struct power_entry_old *peo = sample->raw_data;
+
+	p_state_change(peo->cpu_id, sample->time, peo->value);
+	return 0;
+}
+#endif /* SUPPORT_OLD_POWER_EVENTS */
+
 /*
  * After the last sample we need to wrap up the current C/P state
  * and close out each CPU for these.
@@ -957,6 +979,17 @@ static int __cmd_timechart(const char *output_name)
 		.sample		 = process_sample_event,
 		.ordered_samples = true,
 	};
+	const struct perf_evsel_str_handler power_tracepoints[] = {
+		{ "power:cpu_idle",		process_sample_cpu_idle },
+		{ "power:cpu_frequency",	process_sample_cpu_frequency },
+		{ "sched:sched_wakeup",		process_sample_sched_wakeup },
+		{ "sched:sched_switch",		process_sample_sched_switch },
+#ifdef SUPPORT_OLD_POWER_EVENTS
+		{ "power:power_start",		process_sample_power_start },
+		{ "power:power_end",		process_sample_power_end },
+		{ "power:power_frequency",	process_sample_power_frequency },
+#endif
+	};
 	struct perf_session *session = perf_session__new(input_name, O_RDONLY,
 							 0, false, &perf_timechart);
 	int ret = -EINVAL;
@@ -967,6 +1000,12 @@ static int __cmd_timechart(const char *output_name)
 	if (!perf_session__has_traces(session, "timechart record"))
 		goto out_delete;
 
+	if (perf_session__set_tracepoints_handlers(session,
+						   power_tracepoints)) {
+		pr_err("Initializing session tracepoint handlers failed\n");
+		goto out_delete;
+	}
+
 	ret = perf_session__process_events(session, &perf_timechart);
 	if (ret)
 		goto out_delete;
author
#5 lore raw

PATCH v2 3/5 perf tools: Remove event types from perf data file

In reply to Jiri Olsa

Removing event types data storing/reading to/from perf data file as it's no longer needed. The only user of this data 'perf timechart' was switched to use tracepoints handler callbacks.

The event_types offset and size stay in the perf data file header but are ignored from now on.

Cc Arnaldo Carvalho de Melo <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Corey Ashford <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc David Ahern <[email protected]>
---
 tools/perf/util/header.c | 28 +---------------------------
 tools/perf/util/header.h |  3 +--
 2 files changed, 2 insertions(+), 29 deletions(-)
tools/perf/util/header.c +1 -27
index d12d79c..8862667 100644
@@ -2334,16 +2334,6 @@ int perf_session__write_header(struct perf_session *session,
 		}
 	}
 
-	header->event_offset = lseek(fd, 0, SEEK_CUR);
-	header->event_size = trace_event_count * sizeof(struct perf_trace_event_type);
-	if (trace_events) {
-		err = do_write(fd, trace_events, header->event_size);
-		if (err < 0) {
-			pr_debug("failed to write perf header events\n");
-			return err;
-		}
-	}
-
 	header->data_offset = lseek(fd, 0, SEEK_CUR);
 
 	if (at_exit) {
@@ -2364,10 +2354,7 @@ int perf_session__write_header(struct perf_session *session,
 			.offset = header->data_offset,
 			.size	= header->data_size,
 		},
-		.event_types = {
-			.offset = header->event_offset,
-			.size	= header->event_size,
-		},
+		/* event_types is ignored, store zeros */
 	};
 
 	memcpy(&f_header.adds_features, &header->adds_features, sizeof(header->adds_features));
@@ -2614,8 +2601,6 @@ int perf_file_header__read(struct perf_file_header *header,
 	memcpy(&ph->adds_features, &header->adds_features,
 	       sizeof(ph->adds_features));
 
-	ph->event_offset = header->event_types.offset;
-	ph->event_size   = header->event_types.size;
 	ph->data_offset  = header->data.offset;
 	ph->data_size	 = header->data.size;
 	return 0;
@@ -2839,17 +2824,6 @@ int perf_session__read_header(struct perf_session *session, int fd)
 
 	symbol_conf.nr_events = nr_attrs;
 
-	if (f_header.event_types.size) {
-		lseek(fd, f_header.event_types.offset, SEEK_SET);
-		trace_events = malloc(f_header.event_types.size);
-		if (trace_events == NULL)
-			return -ENOMEM;
-		if (perf_header__getbuffer64(header, fd, trace_events,
-					     f_header.event_types.size))
-			goto out_errno;
-		trace_event_count =  f_header.event_types.size / sizeof(struct perf_trace_event_type);
-	}
-
 	perf_header__process_sections(header, fd, &session->pevent,
 				      perf_file_section__process);
 
tools/perf/util/header.h +1 -2
index 2d1ca7d..298982f 100644
@@ -45,6 +45,7 @@ struct perf_file_header {
 	u64				attr_size;
 	struct perf_file_section	attrs;
 	struct perf_file_section	data;
+	/* event_types is ignored */
 	struct perf_file_section	event_types;
 	DECLARE_BITMAP(adds_features, HEADER_FEAT_BITS);
 };
@@ -88,8 +89,6 @@ struct perf_header {
 	s64			attr_offset;
 	u64			data_offset;
 	u64			data_size;
-	u64			event_offset;
-	u64			event_size;
 	DECLARE_BITMAP(adds_features, HEADER_FEAT_BITS);
 	struct perf_session_env env;
 };
Signature · 1 line
1.7.11.7
#6 lore raw

[tip:perf/core] perf tools: Remove event types from perf data file

perf tools: Remove event types from perf data file
Commit-ID:  44b3c57802b7557d0e2d8c3bd39bce942e9324cc
Gitweb:     http://git.kernel.org/tip/44b3c57802b7557d0e2d8c3bd39bce942e9324cc
Author:     Jiri Olsa <[email protected]>
AuthorDate: Thu, 11 Jul 2013 17:28:31 +0200
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 15 Jul 2013 16:28:10 -0300

perf tools: Remove event types from perf data file

Removing event types data storing/reading to/from perf data file as it's no longer needed. The only user of this data 'perf timechart' was switched to use tracepoints handler callbacks.

The event_types offset and size stay in the perf data file header but are ignored from now on.

---
 tools/perf/util/header.c | 28 +---------------------------
 tools/perf/util/header.h |  3 +--
 2 files changed, 2 insertions(+), 29 deletions(-)
tools/perf/util/header.c +1 -27
index d12d79c..8862667 100644
@@ -2334,16 +2334,6 @@ int perf_session__write_header(struct perf_session *session,
 		}
 	}
 
-	header->event_offset = lseek(fd, 0, SEEK_CUR);
-	header->event_size = trace_event_count * sizeof(struct perf_trace_event_type);
-	if (trace_events) {
-		err = do_write(fd, trace_events, header->event_size);
-		if (err < 0) {
-			pr_debug("failed to write perf header events\n");
-			return err;
-		}
-	}
-
 	header->data_offset = lseek(fd, 0, SEEK_CUR);
 
 	if (at_exit) {
@@ -2364,10 +2354,7 @@ int perf_session__write_header(struct perf_session *session,
 			.offset = header->data_offset,
 			.size	= header->data_size,
 		},
-		.event_types = {
-			.offset = header->event_offset,
-			.size	= header->event_size,
-		},
+		/* event_types is ignored, store zeros */
 	};
 
 	memcpy(&f_header.adds_features, &header->adds_features, sizeof(header->adds_features));
@@ -2614,8 +2601,6 @@ int perf_file_header__read(struct perf_file_header *header,
 	memcpy(&ph->adds_features, &header->adds_features,
 	       sizeof(ph->adds_features));
 
-	ph->event_offset = header->event_types.offset;
-	ph->event_size   = header->event_types.size;
 	ph->data_offset  = header->data.offset;
 	ph->data_size	 = header->data.size;
 	return 0;
@@ -2839,17 +2824,6 @@ int perf_session__read_header(struct perf_session *session, int fd)
 
 	symbol_conf.nr_events = nr_attrs;
 
-	if (f_header.event_types.size) {
-		lseek(fd, f_header.event_types.offset, SEEK_SET);
-		trace_events = malloc(f_header.event_types.size);
-		if (trace_events == NULL)
-			return -ENOMEM;
-		if (perf_header__getbuffer64(header, fd, trace_events,
-					     f_header.event_types.size))
-			goto out_errno;
-		trace_event_count =  f_header.event_types.size / sizeof(struct perf_trace_event_type);
-	}
-
 	perf_header__process_sections(header, fd, &session->pevent,
 				      perf_file_section__process);
 
tools/perf/util/header.h +1 -2
index 2d1ca7d..298982f 100644
@@ -45,6 +45,7 @@ struct perf_file_header {
 	u64				attr_size;
 	struct perf_file_section	attrs;
 	struct perf_file_section	data;
+	/* event_types is ignored */
 	struct perf_file_section	event_types;
 	DECLARE_BITMAP(adds_features, HEADER_FEAT_BITS);
 };
@@ -88,8 +89,6 @@ struct perf_header {
 	s64			attr_offset;
 	u64			data_offset;
 	u64			data_size;
-	u64			event_offset;
-	u64			event_size;
 	DECLARE_BITMAP(adds_features, HEADER_FEAT_BITS);
 	struct perf_session_env env;
 };
author
#7 lore raw

PATCH v2 4/5 perf tools: Remove event types pushing from record command

In reply to Jiri Olsa

Removing event types data pushing from record command. It's no longer needed, because this data is ignored.

Cc Arnaldo Carvalho de Melo <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Corey Ashford <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc David Ahern <[email protected]>
---
 tools/perf/builtin-record.c | 6 ------
 1 file changed, 6 deletions(-)
tools/perf/builtin-record.c +0 -6
index ecca62e..1f5243c 100644
@@ -904,7 +904,6 @@ const struct option record_options[] = {
 int cmd_record(int argc, const char **argv, const char *prefix __maybe_unused)
 {
 	int err = -ENOMEM;
-	struct perf_evsel *pos;
 	struct perf_evlist *evsel_list;
 	struct perf_record *rec = &record;
 	char errbuf[BUFSIZ];
@@ -968,11 +967,6 @@ int cmd_record(int argc, const char **argv, const char *prefix __maybe_unused)
 	if (perf_evlist__create_maps(evsel_list, &rec->opts.target) < 0)
 		usage_with_options(record_usage, record_options);
 
-	list_for_each_entry(pos, &evsel_list->entries, node) {
-		if (perf_header__push_event(pos->attr.config, perf_evsel__name(pos)))
-			goto out_free_fd;
-	}
-
 	if (rec->opts.user_interval != ULLONG_MAX)
 		rec->opts.default_interval = rec->opts.user_interval;
 	if (rec->opts.user_freq != UINT_MAX)
Signature · 1 line
1.7.11.7
#8 lore raw

[tip:perf/core] perf record: Remove event types pushing

perf record: Remove event types pushing
Commit-ID:  30d350795e8e57c17eabaab454932889f1ae8159
Gitweb:     http://git.kernel.org/tip/30d350795e8e57c17eabaab454932889f1ae8159
Author:     Jiri Olsa <[email protected]>
AuthorDate: Thu, 11 Jul 2013 17:28:32 +0200
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 15 Jul 2013 16:28:17 -0300

perf record: Remove event types pushing

Removing event types data pushing from record command. It's no longer needed, because this data is ignored.

---
 tools/perf/builtin-record.c | 6 ------
 1 file changed, 6 deletions(-)
tools/perf/builtin-record.c +0 -6
index ecca62e..1f5243c 100644
@@ -904,7 +904,6 @@ const struct option record_options[] = {
 int cmd_record(int argc, const char **argv, const char *prefix __maybe_unused)
 {
 	int err = -ENOMEM;
-	struct perf_evsel *pos;
 	struct perf_evlist *evsel_list;
 	struct perf_record *rec = &record;
 	char errbuf[BUFSIZ];
@@ -968,11 +967,6 @@ int cmd_record(int argc, const char **argv, const char *prefix __maybe_unused)
 	if (perf_evlist__create_maps(evsel_list, &rec->opts.target) < 0)
 		usage_with_options(record_usage, record_options);
 
-	list_for_each_entry(pos, &evsel_list->entries, node) {
-		if (perf_header__push_event(pos->attr.config, perf_evsel__name(pos)))
-			goto out_free_fd;
-	}
-
 	if (rec->opts.user_interval != ULLONG_MAX)
 		rec->opts.default_interval = rec->opts.user_interval;
 	if (rec->opts.user_freq != UINT_MAX)
author
#9 lore raw

PATCH v2 5/5 perf tools: Remove event types framework completely

In reply to Jiri Olsa

Removing event types framework completely. The only remainder (apart from few comments) is following enum:

  enum perf_user_event_type {
    ...
    PERF_RECORD_HEADER_EVENT_TYPE           = 65, /* depreceated */
    ...
  }

It's kept as depreciated, resulting in error when processed in perf_session__process_user_event function.

Cc Arnaldo Carvalho de Melo <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Corey Ashford <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc David Ahern <[email protected]>
---
 tools/perf/builtin-inject.c |  7 ----
 tools/perf/builtin-record.c |  7 ----
 tools/perf/builtin-report.c |  1 -
 tools/perf/builtin-script.c |  1 -
 tools/perf/util/event.h     |  2 +-
 tools/perf/util/header.c    | 90 ---------------------------------------------
 tools/perf/util/header.h    | 13 -------
 tools/perf/util/session.c   | 11 ------
 tools/perf/util/tool.h      |  3 --
 9 files changed, 1 insertion(+), 134 deletions(-)
tools/perf/builtin-inject.c +0 -7
index ad1296c..1d8de2e 100644
@@ -67,12 +67,6 @@ static int perf_event__repipe_op2_synth(struct perf_tool *tool,
 	return perf_event__repipe_synth(tool, event);
 }
 
-static int perf_event__repipe_event_type_synth(struct perf_tool *tool,
-					       union perf_event *event)
-{
-	return perf_event__repipe_synth(tool, event);
-}
-
 static int perf_event__repipe_attr(struct perf_tool *tool,
 				   union perf_event *event,
 				   struct perf_evlist **pevlist)
@@ -402,7 +396,6 @@ int cmd_inject(int argc, const char **argv, const char *prefix __maybe_unused)
 			.throttle	= perf_event__repipe,
 			.unthrottle	= perf_event__repipe,
 			.attr		= perf_event__repipe_attr,
-			.event_type	= perf_event__repipe_event_type_synth,
 			.tracing_data	= perf_event__repipe_op2_synth,
 			.finished_round	= perf_event__repipe_op2_synth,
 			.build_id	= perf_event__repipe_op2_synth,
tools/perf/builtin-record.c +0 -7
index 1f5243c..a41ac415 100644
@@ -474,13 +474,6 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
 			goto out_delete_session;
 		}
 
-		err = perf_event__synthesize_event_types(tool, process_synthesized_event,
-							 machine);
-		if (err < 0) {
-			pr_err("Couldn't synthesize event_types.\n");
-			goto out_delete_session;
-		}
-
 		if (have_tracepoints(&evsel_list->entries)) {
 			/*
 			 * FIXME err <= 0 here actually means that
tools/perf/builtin-report.c +0 -1
index 9a7e54d..1c32a5e 100644
@@ -741,7 +741,6 @@ int cmd_report(int argc, const char **argv, const char *prefix __maybe_unused)
 			.lost		 = perf_event__process_lost,
 			.read		 = process_read_event,
 			.attr		 = perf_event__process_attr,
-			.event_type	 = perf_event__process_event_type,
 			.tracing_data	 = perf_event__process_tracing_data,
 			.build_id	 = perf_event__process_build_id,
 			.ordered_samples = true,
tools/perf/builtin-script.c +0 -1
index 3de8979..ecb6979 100644
@@ -524,7 +524,6 @@ static struct perf_tool perf_script = {
 	.exit		 = perf_event__process_exit,
 	.fork		 = perf_event__process_fork,
 	.attr		 = perf_event__process_attr,
-	.event_type	 = perf_event__process_event_type,
 	.tracing_data	 = perf_event__process_tracing_data,
 	.build_id	 = perf_event__process_build_id,
 	.ordered_samples = true,
tools/perf/util/event.h +1 -1
index 1813895..1ebb8fb 100644
@@ -116,7 +116,7 @@ struct build_id_event {
 enum perf_user_event_type { /* above any possible kernel type */
 	PERF_RECORD_USER_TYPE_START		= 64,
 	PERF_RECORD_HEADER_ATTR			= 64,
-	PERF_RECORD_HEADER_EVENT_TYPE		= 65,
+	PERF_RECORD_HEADER_EVENT_TYPE		= 65, /* depreceated */
 	PERF_RECORD_HEADER_TRACING_DATA		= 66,
 	PERF_RECORD_HEADER_BUILD_ID		= 67,
 	PERF_RECORD_FINISHED_ROUND		= 68,
tools/perf/util/header.c +0 -90

105 lines not on this page · raw message

tools/perf/util/header.h +0 -13
index 298982f..669fda5 100644
@@ -102,9 +102,6 @@ int perf_session__write_header(struct perf_session *session,
 			       int fd, bool at_exit);
 int perf_header__write_pipe(int fd);
 
-int perf_header__push_event(u64 id, const char *name);
-char *perf_header__find_event(u64 id);
-
 void perf_header__set_feat(struct perf_header *header, int feat);
 void perf_header__clear_feat(struct perf_header *header, int feat);
 bool perf_header__has_feat(const struct perf_header *header, int feat);
@@ -132,16 +129,6 @@ int perf_event__synthesize_attrs(struct perf_tool *tool,
 int perf_event__process_attr(struct perf_tool *tool, union perf_event *event,
 			     struct perf_evlist **pevlist);
 
-int perf_event__synthesize_event_type(struct perf_tool *tool,
-				      u64 event_id, char *name,
-				      perf_event__handler_t process,
-				      struct machine *machine);
-int perf_event__synthesize_event_types(struct perf_tool *tool,
-				       perf_event__handler_t process,
-				       struct machine *machine);
-int perf_event__process_event_type(struct perf_tool *tool,
-				   union perf_event *event);
-
 int perf_event__synthesize_tracing_data(struct perf_tool *tool,
 					int fd, struct perf_evlist *evlist,
 					perf_event__handler_t process);
tools/perf/util/session.c +0 -11
index 1eb58ee..d0d9f94 100644
@@ -241,13 +241,6 @@ static int process_finished_round_stub(struct perf_tool *tool __maybe_unused,
 	return 0;
 }
 
-static int process_event_type_stub(struct perf_tool *tool __maybe_unused,
-				   union perf_event *event __maybe_unused)
-{
-	dump_printf(": unhandled!\n");
-	return 0;
-}
-
 static int process_finished_round(struct perf_tool *tool,
 				  union perf_event *event,
 				  struct perf_session *session);
@@ -274,8 +267,6 @@ static void perf_tool__fill_defaults(struct perf_tool *tool)
 		tool->unthrottle = process_event_stub;
 	if (tool->attr == NULL)
 		tool->attr = process_event_synth_attr_stub;
-	if (tool->event_type == NULL)
-		tool->event_type = process_event_type_stub;
 	if (tool->tracing_data == NULL)
 		tool->tracing_data = process_event_synth_tracing_data_stub;
 	if (tool->build_id == NULL)
@@ -928,8 +919,6 @@ static int perf_session__process_user_event(struct perf_session *session, union
 		if (err == 0)
 			perf_session__set_id_hdr_size(session);
 		return err;
-	case PERF_RECORD_HEADER_EVENT_TYPE:
-		return tool->event_type(tool, event);
 	case PERF_RECORD_HEADER_TRACING_DATA:
 		/* setup for reading amidst mmap */
 		lseek(session->fd, file_offset, SEEK_SET);
tools/perf/util/tool.h +0 -3
index 88f8cbd..62b16b6 100644
@@ -22,8 +22,6 @@ typedef int (*event_attr_op)(struct perf_tool *tool,
 			     union perf_event *event,
 			     struct perf_evlist **pevlist);
 
-typedef int (*event_simple_op)(struct perf_tool *tool, union perf_event *event);
-
 typedef int (*event_op2)(struct perf_tool *tool, union perf_event *event,
 			 struct perf_session *session);
 
@@ -39,7 +37,6 @@ struct perf_tool {
 			unthrottle;
 	event_attr_op	attr;
 	event_op2	tracing_data;
-	event_simple_op	event_type;
 	event_op2	finished_round,
 			build_id;
 	bool		ordered_samples;
Signature · 1 line
1.7.11.7
#10 lore raw

[tip:perf/core] perf tools: Remove event types framework completely

perf tools: Remove event types framework completely
Commit-ID:  6065210db932fd183cbc8bc77558fee275360e71
Gitweb:     http://git.kernel.org/tip/6065210db932fd183cbc8bc77558fee275360e71
Author:     Jiri Olsa <[email protected]>
AuthorDate: Thu, 11 Jul 2013 17:28:33 +0200
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 15 Jul 2013 16:28:22 -0300

perf tools: Remove event types framework completely

Removing event types framework completely. The only remainder (apart from few comments) is following enum:

  enum perf_user_event_type {
    ...
    PERF_RECORD_HEADER_EVENT_TYPE           = 65, /* deprecated */
    ...
  }

It's kept as deprecated, resulting in error when processed in perf_session__process_user_event function.

---
 tools/perf/builtin-inject.c |  7 ----
 tools/perf/builtin-record.c |  7 ----
 tools/perf/builtin-report.c |  1 -
 tools/perf/builtin-script.c |  1 -
 tools/perf/util/event.h     |  2 +-
 tools/perf/util/header.c    | 90 ---------------------------------------------
 tools/perf/util/header.h    | 13 -------
 tools/perf/util/session.c   | 11 ------
 tools/perf/util/tool.h      |  3 --
 9 files changed, 1 insertion(+), 134 deletions(-)
tools/perf/builtin-inject.c +0 -7
index ad1296c..1d8de2e 100644
@@ -67,12 +67,6 @@ static int perf_event__repipe_op2_synth(struct perf_tool *tool,
 	return perf_event__repipe_synth(tool, event);
 }
 
-static int perf_event__repipe_event_type_synth(struct perf_tool *tool,
-					       union perf_event *event)
-{
-	return perf_event__repipe_synth(tool, event);
-}
-
 static int perf_event__repipe_attr(struct perf_tool *tool,
 				   union perf_event *event,
 				   struct perf_evlist **pevlist)
@@ -402,7 +396,6 @@ int cmd_inject(int argc, const char **argv, const char *prefix __maybe_unused)
 			.throttle	= perf_event__repipe,
 			.unthrottle	= perf_event__repipe,
 			.attr		= perf_event__repipe_attr,
-			.event_type	= perf_event__repipe_event_type_synth,
 			.tracing_data	= perf_event__repipe_op2_synth,
 			.finished_round	= perf_event__repipe_op2_synth,
 			.build_id	= perf_event__repipe_op2_synth,
tools/perf/builtin-record.c +0 -7
index 1f5243c..a41ac415 100644
@@ -474,13 +474,6 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
 			goto out_delete_session;
 		}
 
-		err = perf_event__synthesize_event_types(tool, process_synthesized_event,
-							 machine);
-		if (err < 0) {
-			pr_err("Couldn't synthesize event_types.\n");
-			goto out_delete_session;
-		}
-
 		if (have_tracepoints(&evsel_list->entries)) {
 			/*
 			 * FIXME err <= 0 here actually means that
tools/perf/builtin-report.c +0 -1
index 188c265..a34c587 100644
@@ -741,7 +741,6 @@ int cmd_report(int argc, const char **argv, const char *prefix __maybe_unused)
 			.lost		 = perf_event__process_lost,
 			.read		 = process_read_event,
 			.attr		 = perf_event__process_attr,
-			.event_type	 = perf_event__process_event_type,
 			.tracing_data	 = perf_event__process_tracing_data,
 			.build_id	 = perf_event__process_build_id,
 			.ordered_samples = true,
tools/perf/builtin-script.c +0 -1
index 3de8979..ecb6979 100644
@@ -524,7 +524,6 @@ static struct perf_tool perf_script = {
 	.exit		 = perf_event__process_exit,
 	.fork		 = perf_event__process_fork,
 	.attr		 = perf_event__process_attr,
-	.event_type	 = perf_event__process_event_type,
 	.tracing_data	 = perf_event__process_tracing_data,
 	.build_id	 = perf_event__process_build_id,
 	.ordered_samples = true,
tools/perf/util/event.h +1 -1
index 1813895..1ebb8fb 100644
@@ -116,7 +116,7 @@ struct build_id_event {
 enum perf_user_event_type { /* above any possible kernel type */
 	PERF_RECORD_USER_TYPE_START		= 64,
 	PERF_RECORD_HEADER_ATTR			= 64,
-	PERF_RECORD_HEADER_EVENT_TYPE		= 65,
+	PERF_RECORD_HEADER_EVENT_TYPE		= 65, /* depreceated */
 	PERF_RECORD_HEADER_TRACING_DATA		= 66,
 	PERF_RECORD_HEADER_BUILD_ID		= 67,
 	PERF_RECORD_FINISHED_ROUND		= 68,
tools/perf/util/header.c +0 -90

105 lines not on this page · raw message

tools/perf/util/header.h +0 -13
index 298982f..669fda5 100644
@@ -102,9 +102,6 @@ int perf_session__write_header(struct perf_session *session,
 			       int fd, bool at_exit);
 int perf_header__write_pipe(int fd);
 
-int perf_header__push_event(u64 id, const char *name);
-char *perf_header__find_event(u64 id);
-
 void perf_header__set_feat(struct perf_header *header, int feat);
 void perf_header__clear_feat(struct perf_header *header, int feat);
 bool perf_header__has_feat(const struct perf_header *header, int feat);
@@ -132,16 +129,6 @@ int perf_event__synthesize_attrs(struct perf_tool *tool,
 int perf_event__process_attr(struct perf_tool *tool, union perf_event *event,
 			     struct perf_evlist **pevlist);
 
-int perf_event__synthesize_event_type(struct perf_tool *tool,
-				      u64 event_id, char *name,
-				      perf_event__handler_t process,
-				      struct machine *machine);
-int perf_event__synthesize_event_types(struct perf_tool *tool,
-				       perf_event__handler_t process,
-				       struct machine *machine);
-int perf_event__process_event_type(struct perf_tool *tool,
-				   union perf_event *event);
-
 int perf_event__synthesize_tracing_data(struct perf_tool *tool,
 					int fd, struct perf_evlist *evlist,
 					perf_event__handler_t process);
tools/perf/util/session.c +0 -11
index 1eb58ee..d0d9f94 100644
@@ -241,13 +241,6 @@ static int process_finished_round_stub(struct perf_tool *tool __maybe_unused,
 	return 0;
 }
 
-static int process_event_type_stub(struct perf_tool *tool __maybe_unused,
-				   union perf_event *event __maybe_unused)
-{
-	dump_printf(": unhandled!\n");
-	return 0;
-}
-
 static int process_finished_round(struct perf_tool *tool,
 				  union perf_event *event,
 				  struct perf_session *session);
@@ -274,8 +267,6 @@ static void perf_tool__fill_defaults(struct perf_tool *tool)
 		tool->unthrottle = process_event_stub;
 	if (tool->attr == NULL)
 		tool->attr = process_event_synth_attr_stub;
-	if (tool->event_type == NULL)
-		tool->event_type = process_event_type_stub;
 	if (tool->tracing_data == NULL)
 		tool->tracing_data = process_event_synth_tracing_data_stub;
 	if (tool->build_id == NULL)
@@ -928,8 +919,6 @@ static int perf_session__process_user_event(struct perf_session *session, union
 		if (err == 0)
 			perf_session__set_id_hdr_size(session);
 		return err;
-	case PERF_RECORD_HEADER_EVENT_TYPE:
-		return tool->event_type(tool, event);
 	case PERF_RECORD_HEADER_TRACING_DATA:
 		/* setup for reading amidst mmap */
 		lseek(session->fd, file_offset, SEEK_SET);
tools/perf/util/tool.h +0 -3
index 88f8cbd..62b16b6 100644
@@ -22,8 +22,6 @@ typedef int (*event_attr_op)(struct perf_tool *tool,
 			     union perf_event *event,
 			     struct perf_evlist **pevlist);
 
-typedef int (*event_simple_op)(struct perf_tool *tool, union perf_event *event);
-
 typedef int (*event_op2)(struct perf_tool *tool, union perf_event *event,
 			 struct perf_session *session);
 
@@ -39,7 +37,6 @@ struct perf_tool {
 			unthrottle;
 	event_attr_op	attr;
 	event_op2	tracing_data;
-	event_simple_op	event_type;
 	event_op2	finished_round,
 			build_id;
 	bool		ordered_samples;
maintainer Acked-by on the v2 series
#11 lore raw
In reply to Jiri Olsa

Hi Jiri,

Quoted 11 lines · Jiri Olsa

hi,
following up on the 'perf timechart' FIXME note and changing its tracepoint match not to use event types data.

Original RFC sent here:
http://marc.info/?l=linux-kernel&m=137344263513417&w=2

v2 changes:
- using tracepoints haler callbacks to get power data in timechart command (patch 2)
- separating enum removal of 'enum trace_flag_type'

Quoted 8 lines
    (patch 1)

Again, timechart (and perf.data) tests look ok, but would appreciate another tester ;-).

It's reachable here:
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
perf/et2

For the whole patchset:

Thanks,
Namhyung