Skip to contentSkip to conversation

tsc: make calibration refinement more robust

PATCH Superseded Daniel Vacek 3 participants 11 messages Nov 1, 2018 – Jan 28, 2019 x86

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 tsc: make calibration refinement more robust

The threshold in tsc_read_refs() is constant which may favor slower CPUs but may not be optimal for simple reading of reference on faster ones. Hence make it proportional to tsc_khz to compensate for this. The threshold guards against any disturbance like IRQs, NMIs, SMIs or CPU stealing by host on guest systems so rename it accordingly and fix comments as well.

Also on some systems there is noticeable DMI bus contention at some point during boot keeping the readout failing (observed with about one in ~300 boots when testing). In that case retry also the second readout instead of simply bailing out unrefined. Usually the next second the readout returns fast just fine without any issues.

---
 arch/x86/kernel/tsc.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)
arch/x86/kernel/tsc.c +11 -10
index 6d5dc5dabfd7..7812cd7bd45b 100644
@@ -297,11 +297,11 @@ static int __init tsc_setup(char *str)
 
 __setup("tsc=", tsc_setup);
 
-#define MAX_RETRIES     5
-#define SMI_TRESHOLD    50000
+#define MAX_RETRIES	5
+#define TSC_THRESHOLD	(tsc_khz >> 5)
 
 /*
- * Read TSC and the reference counters. Take care of SMI disturbance
+ * Read TSC and the reference counters. Take care of any disturbances
  */
 static u64 tsc_read_refs(u64 *p, int hpet)
 {
@@ -315,7 +315,7 @@ static u64 tsc_read_refs(u64 *p, int hpet)
 		else
 			*p = acpi_pm_read_early();
 		t2 = get_cycles();
-		if ((t2 - t1) < SMI_TRESHOLD)
+		if ((t2 - t1) < TSC_THRESHOLD)
 			return t2;
 	}
 	return ULLONG_MAX;
@@ -1268,7 +1268,7 @@ struct system_counterval_t convert_art_ns_to_tsc(u64 art_ns)
  */
 static void tsc_refine_calibration_work(struct work_struct *work)
 {
-	static u64 tsc_start = -1, ref_start;
+	static u64 tsc_start = ULLONG_MAX, ref_start;
 	static int hpet;
 	u64 tsc_stop, ref_stop, delta;
 	unsigned long freq;
@@ -1283,14 +1283,15 @@ static void tsc_refine_calibration_work(struct work_struct *work)
 	 * delayed the first time we expire. So set the workqueue
 	 * again once we know timers are working.
 	 */
-	if (tsc_start == -1) {
+	if (tsc_start == ULLONG_MAX) {
+restart:
 		/*
 		 * Only set hpet once, to avoid mixing hardware
 		 * if the hpet becomes enabled later.
 		 */
 		hpet = is_hpet_enabled();
-		schedule_delayed_work(&tsc_irqwork, HZ);
 		tsc_start = tsc_read_refs(&ref_start, hpet);
+		schedule_delayed_work(&tsc_irqwork, HZ);
 		return;
 	}
 
@@ -1300,9 +1301,9 @@ static void tsc_refine_calibration_work(struct work_struct *work)
 	if (ref_start == ref_stop)
 		goto out;
 
-	/* Check, whether the sampling was disturbed by an SMI */
-	if (tsc_start == ULLONG_MAX || tsc_stop == ULLONG_MAX)
-		goto out;
+	/* Check, whether the sampling was disturbed */
+	if (tsc_stop == ULLONG_MAX)
+		goto restart;
 
 	delta = tsc_stop - tsc_start;
 	delta *= 1000000LL;
Signature · 1 line
2.19.1
#1 lore raw

Daniel,

On Thu, 1 Nov 2018, Daniel Vacek wrote:

Please use 'x86/tsc:' as prefix. git log path/to/file usually gives you a reasonable hint about prefixes.

arch/x86/kernel/tsc.c static int __init tsc_setup(char *str) · line 301

Quoted 4 lines
arch/x86/kernel/tsc.c +2 -2
-#define MAX_RETRIES     5
-#define SMI_TRESHOLD    50000
+#define MAX_RETRIES	5
+#define TSC_THRESHOLD	(tsc_khz >> 5)

This breaks pit_hpet_ptimer_calibrate_cpu() because at that point tsc_hkz is 0.

Thanks,

tglx

#2 lore raw

Hi Thomas,

thanks for checking.

Quoted 6 lines · Thomas Gleixner

Daniel,

On Thu, 1 Nov 2018, Daniel Vacek wrote:

Please use 'x86/tsc:' as prefix. git log path/to/file usually gives you a reasonable hint about prefixes.

Oh, sure thing. The dmesg always prints 'tsc:' - I somehow sticked to it...

Quoted 6 lines

arch/x86/kernel/tsc.c static int __init tsc_setup(char *str) · line 301

Quoted 4 lines
arch/x86/kernel/tsc.c +2 -2
-#define MAX_RETRIES     5
-#define SMI_TRESHOLD    50000
+#define MAX_RETRIES  5
+#define TSC_THRESHOLD        (tsc_khz >> 5)

This breaks pit_hpet_ptimer_calibrate_cpu() because at that point tsc_hkz is 0.

That did not show up with my testing, sorry. I guess pit_calibrate_tsc() never failed for me. Hmm, actually it looks like quick_pit_calibrate() does the job for me so pit_hpet_ptimer_calibrate_cpu() is likely not even called. Would this:

#define TSC_THRESHOLD (tsc_khz? tsc_khz >> 5: 0x20000)

work for you instead? Or alternatively at some point when chasing this down I used:

#define TSC_THRESHOLD (0x10000 + (tsc_khz >> 6))

The first one seems better though. I can send v2 next week if you like it.

--nX

Quoted 3 lines

Thanks,

tglx

#3 lore raw

Daniel,

Quoted 8 lines · Daniel Vacek
Quoted 6 lines · Thomas Gleixner

arch/x86/kernel/tsc.c static int __init tsc_setup(char *str) · line 301

Quoted 4 lines
arch/x86/kernel/tsc.c +2 -2
-#define MAX_RETRIES     5
-#define SMI_TRESHOLD    50000
+#define MAX_RETRIES  5
+#define TSC_THRESHOLD        (tsc_khz >> 5)

This breaks pit_hpet_ptimer_calibrate_cpu() because at that point tsc_hkz is 0.

Quoted 4 lines

That did not show up with my testing, sorry. I guess pit_calibrate_tsc() never failed for me. Hmm, actually it looks like quick_pit_calibrate() does the job for me so pit_hpet_ptimer_calibrate_cpu() is likely not even called.

Right. It's only called when quick calibration fails. Testing does not replace code inspection :)

Quoted 10 lines

Would this:

#define TSC_THRESHOLD (tsc_khz? tsc_khz >> 5: 0x20000)

work for you instead? Or alternatively at some point when chasing this down I used:

#define TSC_THRESHOLD (0x10000 + (tsc_khz >> 6))

The first one seems better though. I can send v2 next week if you like it.

Can you please avoid hiding the logic in a macro? Just use a local variable:

	u64 thresh = tsc_khz ? tsc_khz >> 5 : TSC_DEFAULT_THRESHOLD;

and use that in the comparison.

Thanks,

tglx

#4 lore raw
Quoted 11 lines · Thomas Gleixner

Daniel,

Quoted 8 lines · Daniel Vacek
Quoted 6 lines · Thomas Gleixner

arch/x86/kernel/tsc.c static int __init tsc_setup(char *str) · line 301

Quoted 4 lines
arch/x86/kernel/tsc.c +2 -2
-#define MAX_RETRIES     5
-#define SMI_TRESHOLD    50000
+#define MAX_RETRIES  5
+#define TSC_THRESHOLD        (tsc_khz >> 5)

This breaks pit_hpet_ptimer_calibrate_cpu() because at that point tsc_hkz is 0.

Quoted 7 lines
Quoted 4 lines

That did not show up with my testing, sorry. I guess pit_calibrate_tsc() never failed for me. Hmm, actually it looks like quick_pit_calibrate() does the job for me so pit_hpet_ptimer_calibrate_cpu() is likely not even called.

Right. It's only called when quick calibration fails. Testing does not replace code inspection :)

Agreed. I was not 100% sure about this early init and order of execution as it's dynamically changed with x86_platform.calibrate_cpu and x86_platform.calibrate_tsc. Thanks again for the review, Thomas.

Quoted 6 lines

Can you please avoid hiding the logic in a macro? Just use a local variable:

        u64 thresh = tsc_khz ? tsc_khz >> 5 : TSC_DEFAULT_THRESHOLD;

and use that in the comparison.

Sweet, I'll do that :)

--nX

Quoted 3 lines

Thanks,

tglx

#5 lore raw

PATCH v2 1/1 x86/tsc: make calibration refinement more robust

In reply to Daniel Vacek

The threshold in tsc_read_refs() is constant which may favor slower CPUs but may not be optimal for simple reading of reference on faster ones. Hence make it proportional to tsc_khz when available to compensate for this. The threshold guards against any disturbance like IRQs, NMIs, SMIs or CPU stealing by host on guest systems so rename it accordingly and fix comments as well.

Also on some systems there is noticeable DMI bus contention at some point during boot keeping the readout failing (observed with about one in ~300 boots when testing). In that case retry also the second readout instead of simply bailing out unrefined. Usually the next second the readout returns fast just fine without any issues.

v2: keep using the constant early when the tsc_khz is not available yet
as suggested by tglx

---
 arch/x86/kernel/tsc.c | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)
arch/x86/kernel/tsc.c +16 -14
index e9f777bfed40..3fae23834069 100644
@@ -297,15 +297,16 @@ static int __init tsc_setup(char *str)
 
 __setup("tsc=", tsc_setup);
 
-#define MAX_RETRIES     5
-#define SMI_TRESHOLD    50000
+#define MAX_RETRIES		5
+#define TSC_DEFAULT_THRESHOLD	0x20000
 
 /*
- * Read TSC and the reference counters. Take care of SMI disturbance
+ * Read TSC and the reference counters. Take care of any disturbances
  */
 static u64 tsc_read_refs(u64 *p, int hpet)
 {
 	u64 t1, t2;
+	u64 thresh = tsc_khz ? tsc_khz >> 5 : TSC_DEFAULT_THRESHOLD;
 	int i;
 
 	for (i = 0; i < MAX_RETRIES; i++) {
@@ -315,7 +316,7 @@ static u64 tsc_read_refs(u64 *p, int hpet)
 		else
 			*p = acpi_pm_read_early();
 		t2 = get_cycles();
-		if ((t2 - t1) < SMI_TRESHOLD)
+		if ((t2 - t1) < thresh)
 			return t2;
 	}
 	return ULLONG_MAX;
@@ -703,15 +704,15 @@ static unsigned long pit_hpet_ptimer_calibrate_cpu(void)
 	 * zero. In each wait loop iteration we read the TSC and check
 	 * the delta to the previous read. We keep track of the min
 	 * and max values of that delta. The delta is mostly defined
-	 * by the IO time of the PIT access, so we can detect when a
-	 * SMI/SMM disturbance happened between the two reads. If the
+	 * by the IO time of the PIT access, so we can detect when
+	 * any disturbance happened between the two reads. If the
 	 * maximum time is significantly larger than the minimum time,
 	 * then we discard the result and have another try.
 	 *
 	 * 2) Reference counter. If available we use the HPET or the
 	 * PMTIMER as a reference to check the sanity of that value.
 	 * We use separate TSC readouts and check inside of the
-	 * reference read for a SMI/SMM disturbance. We dicard
+	 * reference read for any possible disturbance. We dicard
 	 * disturbed values here as well. We do that around the PIT
 	 * calibration delay loop as we have to wait for a certain
 	 * amount of time anyway.
@@ -744,7 +745,7 @@ static unsigned long pit_hpet_ptimer_calibrate_cpu(void)
 		if (ref1 == ref2)
 			continue;
 
-		/* Check, whether the sampling was disturbed by an SMI */
+		/* Check, whether the sampling was disturbed */
 		if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX)
 			continue;
 
@@ -1268,7 +1269,7 @@ struct system_counterval_t convert_art_ns_to_tsc(u64 art_ns)
  */
 static void tsc_refine_calibration_work(struct work_struct *work)
 {
-	static u64 tsc_start = -1, ref_start;
+	static u64 tsc_start = ULLONG_MAX, ref_start;
 	static int hpet;
 	u64 tsc_stop, ref_stop, delta;
 	unsigned long freq;
@@ -1283,14 +1284,15 @@ static void tsc_refine_calibration_work(struct work_struct *work)
 	 * delayed the first time we expire. So set the workqueue
 	 * again once we know timers are working.
 	 */
-	if (tsc_start == -1) {
+	if (tsc_start == ULLONG_MAX) {
+restart:
 		/*
 		 * Only set hpet once, to avoid mixing hardware
 		 * if the hpet becomes enabled later.
 		 */
 		hpet = is_hpet_enabled();
-		schedule_delayed_work(&tsc_irqwork, HZ);
 		tsc_start = tsc_read_refs(&ref_start, hpet);
+		schedule_delayed_work(&tsc_irqwork, HZ);
 		return;
 	}
 
@@ -1300,9 +1302,9 @@ static void tsc_refine_calibration_work(struct work_struct *work)
 	if (ref_start == ref_stop)
 		goto out;
 
-	/* Check, whether the sampling was disturbed by an SMI */
-	if (tsc_start == ULLONG_MAX || tsc_stop == ULLONG_MAX)
-		goto out;
+	/* Check, whether the sampling was disturbed */
+	if (tsc_stop == ULLONG_MAX)
+		goto restart;
 
 	delta = tsc_stop - tsc_start;
 	delta *= 1000000LL;
Signature · 1 line
2.19.1
#6 lore raw

[tip:x86/timers] x86/tsc: Make calibration refinement more robust

x86/tsc: Make calibration refinement more robust
Commit-ID:  a786ef152cdcfebc923a67f63c7815806eefcf81
Gitweb:     https://git.kernel.org/tip/a786ef152cdcfebc923a67f63c7815806eefcf81
Author:     Daniel Vacek <[email protected]>
AuthorDate: Mon, 5 Nov 2018 18:10:40 +0100
Committer:  Thomas Gleixner <[email protected]>
CommitDate: Tue, 6 Nov 2018 21:53:15 +0100

x86/tsc: Make calibration refinement more robust

The threshold in tsc_read_refs() is constant which may favor slower CPUs but may not be optimal for simple reading of reference on faster ones.

Hence make it proportional to tsc_khz when available to compensate for this. The threshold guards against any disturbance like IRQs, NMIs, SMIs or CPU stealing by host on guest systems so rename it accordingly and fix comments as well.

Also on some systems there is noticeable DMI bus contention at some point during boot keeping the readout failing (observed with about one in ~300 boots when testing). In that case retry also the second readout instead of simply bailing out unrefined. Usually the next second the readout returns fast just fine without any issues.

---
 arch/x86/kernel/tsc.c | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)
arch/x86/kernel/tsc.c +16 -14
index e9f777bfed40..3fae23834069 100644
@@ -297,15 +297,16 @@ static int __init tsc_setup(char *str)
 
 __setup("tsc=", tsc_setup);
 
-#define MAX_RETRIES     5
-#define SMI_TRESHOLD    50000
+#define MAX_RETRIES		5
+#define TSC_DEFAULT_THRESHOLD	0x20000
 
 /*
- * Read TSC and the reference counters. Take care of SMI disturbance
+ * Read TSC and the reference counters. Take care of any disturbances
  */
 static u64 tsc_read_refs(u64 *p, int hpet)
 {
 	u64 t1, t2;
+	u64 thresh = tsc_khz ? tsc_khz >> 5 : TSC_DEFAULT_THRESHOLD;
 	int i;
 
 	for (i = 0; i < MAX_RETRIES; i++) {
@@ -315,7 +316,7 @@ static u64 tsc_read_refs(u64 *p, int hpet)
 		else
 			*p = acpi_pm_read_early();
 		t2 = get_cycles();
-		if ((t2 - t1) < SMI_TRESHOLD)
+		if ((t2 - t1) < thresh)
 			return t2;
 	}
 	return ULLONG_MAX;
@@ -703,15 +704,15 @@ static unsigned long pit_hpet_ptimer_calibrate_cpu(void)
 	 * zero. In each wait loop iteration we read the TSC and check
 	 * the delta to the previous read. We keep track of the min
 	 * and max values of that delta. The delta is mostly defined
-	 * by the IO time of the PIT access, so we can detect when a
-	 * SMI/SMM disturbance happened between the two reads. If the
+	 * by the IO time of the PIT access, so we can detect when
+	 * any disturbance happened between the two reads. If the
 	 * maximum time is significantly larger than the minimum time,
 	 * then we discard the result and have another try.
 	 *
 	 * 2) Reference counter. If available we use the HPET or the
 	 * PMTIMER as a reference to check the sanity of that value.
 	 * We use separate TSC readouts and check inside of the
-	 * reference read for a SMI/SMM disturbance. We dicard
+	 * reference read for any possible disturbance. We dicard
 	 * disturbed values here as well. We do that around the PIT
 	 * calibration delay loop as we have to wait for a certain
 	 * amount of time anyway.
@@ -744,7 +745,7 @@ static unsigned long pit_hpet_ptimer_calibrate_cpu(void)
 		if (ref1 == ref2)
 			continue;
 
-		/* Check, whether the sampling was disturbed by an SMI */
+		/* Check, whether the sampling was disturbed */
 		if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX)
 			continue;
 
@@ -1268,7 +1269,7 @@ static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work);
  */
 static void tsc_refine_calibration_work(struct work_struct *work)
 {
-	static u64 tsc_start = -1, ref_start;
+	static u64 tsc_start = ULLONG_MAX, ref_start;
 	static int hpet;
 	u64 tsc_stop, ref_stop, delta;
 	unsigned long freq;
@@ -1283,14 +1284,15 @@ static void tsc_refine_calibration_work(struct work_struct *work)
 	 * delayed the first time we expire. So set the workqueue
 	 * again once we know timers are working.
 	 */
-	if (tsc_start == -1) {
+	if (tsc_start == ULLONG_MAX) {
+restart:
 		/*
 		 * Only set hpet once, to avoid mixing hardware
 		 * if the hpet becomes enabled later.
 		 */
 		hpet = is_hpet_enabled();
-		schedule_delayed_work(&tsc_irqwork, HZ);
 		tsc_start = tsc_read_refs(&ref_start, hpet);
+		schedule_delayed_work(&tsc_irqwork, HZ);
 		return;
 	}
 
@@ -1300,9 +1302,9 @@ static void tsc_refine_calibration_work(struct work_struct *work)
 	if (ref_start == ref_stop)
 		goto out;
 
-	/* Check, whether the sampling was disturbed by an SMI */
-	if (tsc_start == ULLONG_MAX || tsc_stop == ULLONG_MAX)
-		goto out;
+	/* Check, whether the sampling was disturbed */
+	if (tsc_stop == ULLONG_MAX)
+		goto restart;
 
 	delta = tsc_stop - tsc_start;
 	delta *= 1000000LL;
#7 lore raw

Re: [tip:x86/timers] x86/tsc: Make calibration refinement more robust

Hi Thomas, Ingo, Peter.

I'm wondering, was x86/timers branch of tip tree merged to linus' tree for v5.0-rc1? Somehow I do not see this patch make it through...

Am I doing something wrong?

--nX

Quoted 135 lines · tip-bot for Daniel Vacek
Commit-ID:  a786ef152cdcfebc923a67f63c7815806eefcf81
Gitweb:     https://git.kernel.org/tip/a786ef152cdcfebc923a67f63c7815806eefcf81
Author:     Daniel Vacek <[email protected]>
AuthorDate: Mon, 5 Nov 2018 18:10:40 +0100
Committer:  Thomas Gleixner <[email protected]>
CommitDate: Tue, 6 Nov 2018 21:53:15 +0100

x86/tsc: Make calibration refinement more robust

The threshold in tsc_read_refs() is constant which may favor slower CPUs but may not be optimal for simple reading of reference on faster ones.

Hence make it proportional to tsc_khz when available to compensate for this. The threshold guards against any disturbance like IRQs, NMIs, SMIs or CPU stealing by host on guest systems so rename it accordingly and fix comments as well.

Also on some systems there is noticeable DMI bus contention at some point during boot keeping the readout failing (observed with about one in ~300 boots when testing). In that case retry also the second readout instead of simply bailing out unrefined. Usually the next second the readout returns fast just fine without any issues.

---
 arch/x86/kernel/tsc.c | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)
arch/x86/kernel/tsc.c +16 -14
index e9f777bfed40..3fae23834069 100644
@@ -297,15 +297,16 @@ static int __init tsc_setup(char *str)
 
 __setup("tsc=", tsc_setup);
 
-#define MAX_RETRIES     5
-#define SMI_TRESHOLD    50000
+#define MAX_RETRIES            5
+#define TSC_DEFAULT_THRESHOLD  0x20000
 
 /*
- * Read TSC and the reference counters. Take care of SMI disturbance
+ * Read TSC and the reference counters. Take care of any disturbances
  */
 static u64 tsc_read_refs(u64 *p, int hpet)
 {
        u64 t1, t2;
+       u64 thresh = tsc_khz ? tsc_khz >> 5 : TSC_DEFAULT_THRESHOLD;
        int i;
 
        for (i = 0; i < MAX_RETRIES; i++) {
@@ -315,7 +316,7 @@ static u64 tsc_read_refs(u64 *p, int hpet)
                else
                        *p = acpi_pm_read_early();
                t2 = get_cycles();
-               if ((t2 - t1) < SMI_TRESHOLD)
+               if ((t2 - t1) < thresh)
                        return t2;
        }
        return ULLONG_MAX;
@@ -703,15 +704,15 @@ static unsigned long pit_hpet_ptimer_calibrate_cpu(void)
         * zero. In each wait loop iteration we read the TSC and check
         * the delta to the previous read. We keep track of the min
         * and max values of that delta. The delta is mostly defined
-        * by the IO time of the PIT access, so we can detect when a
-        * SMI/SMM disturbance happened between the two reads. If the
+        * by the IO time of the PIT access, so we can detect when
+        * any disturbance happened between the two reads. If the
         * maximum time is significantly larger than the minimum time,
         * then we discard the result and have another try.
         *
         * 2) Reference counter. If available we use the HPET or the
         * PMTIMER as a reference to check the sanity of that value.
         * We use separate TSC readouts and check inside of the
-        * reference read for a SMI/SMM disturbance. We dicard
+        * reference read for any possible disturbance. We dicard
         * disturbed values here as well. We do that around the PIT
         * calibration delay loop as we have to wait for a certain
         * amount of time anyway.
@@ -744,7 +745,7 @@ static unsigned long pit_hpet_ptimer_calibrate_cpu(void)
                if (ref1 == ref2)
                        continue;
 
-               /* Check, whether the sampling was disturbed by an SMI */
+               /* Check, whether the sampling was disturbed */
                if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX)
                        continue;
 
@@ -1268,7 +1269,7 @@ static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work);
  */
 static void tsc_refine_calibration_work(struct work_struct *work)
 {
-       static u64 tsc_start = -1, ref_start;
+       static u64 tsc_start = ULLONG_MAX, ref_start;
        static int hpet;
        u64 tsc_stop, ref_stop, delta;
        unsigned long freq;
@@ -1283,14 +1284,15 @@ static void tsc_refine_calibration_work(struct work_struct *work)
         * delayed the first time we expire. So set the workqueue
         * again once we know timers are working.
         */
-       if (tsc_start == -1) {
+       if (tsc_start == ULLONG_MAX) {
+restart:
                /*
                 * Only set hpet once, to avoid mixing hardware
                 * if the hpet becomes enabled later.
                 */
                hpet = is_hpet_enabled();
-               schedule_delayed_work(&tsc_irqwork, HZ);
                tsc_start = tsc_read_refs(&ref_start, hpet);
+               schedule_delayed_work(&tsc_irqwork, HZ);
                return;
        }
 
@@ -1300,9 +1302,9 @@ static void tsc_refine_calibration_work(struct work_struct *work)
        if (ref_start == ref_stop)
                goto out;
 
-       /* Check, whether the sampling was disturbed by an SMI */
-       if (tsc_start == ULLONG_MAX || tsc_stop == ULLONG_MAX)
-               goto out;
+       /* Check, whether the sampling was disturbed */
+       if (tsc_stop == ULLONG_MAX)
+               goto restart;
 
        delta = tsc_stop - tsc_start;
        delta *= 1000000LL;
#8 lore raw

Re: [tip:x86/timers] x86/tsc: Make calibration refinement more robust

Daniel,

Quoted 4 lines · Daniel Vacek

I'm wondering, was x86/timers branch of tip tree merged to linus' tree for v5.0-rc1? Somehow I do not see this patch make it through...

Am I doing something wrong?

No. The branch was not sent to Linus during the merge window due to holiday season induced oversight.

Thanks,

tglx

#9 lore raw

Re: [tip:x86/timers] x86/tsc: Make calibration refinement more robust

Quoted 3 lines · Thomas Gleixner

No. The branch was not sent to Linus during the merge window due to holiday season induced oversight.

So does it wait for the next merge window now or is it still going to be sent? This is actually worth stable branches. I've confirmations from Hitachi and Nec that this really helps latest Skylake-X systems boot reliably.

--nX

#10 lore raw

Re: [tip:x86/timers] x86/tsc: Make calibration refinement more robust

Quoted 9 lines · Daniel Vacek
Quoted 3 lines · Thomas Gleixner

No. The branch was not sent to Linus during the merge window due to holiday season induced oversight.

So does it wait for the next merge window now or is it still going to be sent? This is actually worth stable branches. I've confirmations from Hitachi and Nec that this really helps latest Skylake-X systems boot reliably.

It's in 5.0-rc4 now.

Thanks,

tglx