Skip to contentSkip to conversation

irq: Use a common macro to go through the actions list

PATCH In review Daniel Lezcano 2 participants 4 messages Jan 14, 2016 – Feb 14, 2016 IRQ

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 irq: Use a common macro to go through the actions list

The irq code browses the list of actions differently to inspect the element one by one. Even if it is not a problem, for the sake of lisibility and to unification of the code, provide a macro similar to for_each_irq_desc in order to have the same loop to go through the actions list and use it in the code.

---
 kernel/irq/handle.c    | 7 +++----
 kernel/irq/internals.h | 3 +++
 kernel/irq/manage.c    | 8 +++-----
 kernel/irq/proc.c      | 2 +-
 kernel/irq/spurious.c  | 4 +---
 5 files changed, 11 insertions(+), 13 deletions(-)
kernel/irq/handle.c +3 -4
index a302cf9..d881858 100644
@@ -136,9 +136,9 @@ irqreturn_t handle_irq_event_percpu(struct irq_desc *desc)
 {
 	irqreturn_t retval = IRQ_NONE;
 	unsigned int flags = 0, irq = desc->irq_data.irq;
-	struct irqaction *action = desc->action;
+	struct irqaction *action;
 
-	do {
+	for_each_desc_action(desc, action) {
 		irqreturn_t res;
 
 		trace_irq_handler_entry(irq, action);
@@ -172,8 +172,7 @@ irqreturn_t handle_irq_event_percpu(struct irq_desc *desc)
 		}
 
 		retval |= res;
-		action = action->next;
-	} while (action);
+	}
 
 	add_interrupt_randomness(irq, flags);
 
kernel/irq/internals.h +3 -0
index fcab63c..5ea67df 100644
@@ -131,6 +131,9 @@ static inline void chip_bus_sync_unlock(struct irq_desc *desc)
 #define IRQ_GET_DESC_CHECK_GLOBAL	(_IRQ_DESC_CHECK)
 #define IRQ_GET_DESC_CHECK_PERCPU	(_IRQ_DESC_CHECK | _IRQ_DESC_PERCPU)
 
+#define for_each_desc_action(desc, act)			\
+	for (act = desc->act; act; act = act->next)
+
 struct irq_desc *
 __irq_get_desc_lock(unsigned int irq, unsigned long *flags, bool bus,
 		    unsigned int check);
kernel/irq/manage.c +3 -5
index c84670c..db54a87 100644
@@ -144,13 +144,11 @@ int irq_can_set_affinity(unsigned int irq)
  */
 void irq_set_thread_affinity(struct irq_desc *desc)
 {
-	struct irqaction *action = desc->action;
+	struct irqaction *action;
 
-	while (action) {
+	for_each_desc_action(desc, action)
 		if (action->thread)
 			set_bit(IRQTF_AFFINITY, &action->thread_flags);
-		action = action->next;
-	}
 }
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
@@ -994,7 +992,7 @@ void irq_wake_thread(unsigned int irq, void *dev_id)
 		return;
 
 	raw_spin_lock_irqsave(&desc->lock, flags);
-	for (action = desc->action; action; action = action->next) {
+	for_each_desc_action(desc, action) {
 		if (action->dev_id == dev_id) {
 			if (action->thread)
 				__irq_wake_thread(desc, action);
kernel/irq/proc.c +1 -1
index a2c02fd..24ec6ad 100644
@@ -291,7 +291,7 @@ static int name_unique(unsigned int irq, struct irqaction *new_action)
 	int ret = 1;
 
 	raw_spin_lock_irqsave(&desc->lock, flags);
-	for (action = desc->action ; action; action = action->next) {
+	for_each_desc_action(desc, action) {
 		if ((action != new_action) && action->name &&
 				!strcmp(new_action->name, action->name)) {
 			ret = 0;
kernel/irq/spurious.c +1 -3
index 3214417..3910b0a 100644
@@ -211,14 +211,12 @@ static void __report_bad_irq(struct irq_desc *desc, irqreturn_t action_ret)
 	 * desc->lock here. See synchronize_irq().
 	 */
 	raw_spin_lock_irqsave(&desc->lock, flags);
-	action = desc->action;
-	while (action) {
+	for_each_desc_action(desc, action) {
 		printk(KERN_ERR "[<%p>] %pf", action->handler, action->handler);
 		if (action->thread_fn)
 			printk(KERN_CONT " threaded [<%p>] %pf",
 					action->thread_fn, action->thread_fn);
 		printk(KERN_CONT "\n");
-		action = action->next;
 	}
 	raw_spin_unlock_irqrestore(&desc->lock, flags);
 }
Signature · 1 line
1.9.1
#1 lore raw

[tip:irq/core] genirq: Use a common macro to go through the actions list

genirq: Use a common macro to go through the actions list
Commit-ID:  aff62cf66ad6065ce04fc3454a11ec19714537fb
Gitweb:     http://git.kernel.org/tip/aff62cf66ad6065ce04fc3454a11ec19714537fb
Author:     Daniel Lezcano <[email protected]>
AuthorDate: Thu, 14 Jan 2016 10:54:13 +0100
Committer:  Thomas Gleixner <[email protected]>
CommitDate: Mon, 8 Feb 2016 11:45:21 +0100

genirq: Use a common macro to go through the actions list

The irq code browses the list of actions differently to inspect the element one by one. Even if it is not a problem, for the sake of consistent code, provide a macro similar to for_each_irq_desc in order to have the same loop to go through the actions list and use it in the code.

[ tglx: Renamed the macro ]

---
 kernel/irq/handle.c    | 5 ++---
 kernel/irq/internals.h | 3 +++
 kernel/irq/manage.c    | 8 +++-----
 kernel/irq/proc.c      | 2 +-
 kernel/irq/spurious.c  | 4 +---
 5 files changed, 10 insertions(+), 12 deletions(-)
kernel/irq/handle.c +2 -3
index 57bff78..67534d0 100644
@@ -136,10 +136,9 @@ irqreturn_t handle_irq_event_percpu(struct irq_desc *desc)
 {
 	irqreturn_t retval = IRQ_NONE;
 	unsigned int flags = 0, irq = desc->irq_data.irq;
-	struct irqaction *action = desc->action;
+	struct irqaction *action;
 
-	/* action might have become NULL since we dropped the lock */
-	while (action) {
+	for_each_action_of_desc(desc, action) {
 		irqreturn_t res;
 
 		trace_irq_handler_entry(irq, action);
kernel/irq/internals.h +3 -0
index fcab63c..eab521f 100644
@@ -131,6 +131,9 @@ static inline void chip_bus_sync_unlock(struct irq_desc *desc)
 #define IRQ_GET_DESC_CHECK_GLOBAL	(_IRQ_DESC_CHECK)
 #define IRQ_GET_DESC_CHECK_PERCPU	(_IRQ_DESC_CHECK | _IRQ_DESC_PERCPU)
 
+#define for_each_action_of_desc(desc, act)			\
+	for (act = desc->act; act; act = act->next)
+
 struct irq_desc *
 __irq_get_desc_lock(unsigned int irq, unsigned long *flags, bool bus,
 		    unsigned int check);
kernel/irq/manage.c +3 -5
index 8411872..3ddd229 100644
@@ -144,13 +144,11 @@ int irq_can_set_affinity(unsigned int irq)
  */
 void irq_set_thread_affinity(struct irq_desc *desc)
 {
-	struct irqaction *action = desc->action;
+	struct irqaction *action;
 
-	while (action) {
+	for_each_action_of_desc(desc, action)
 		if (action->thread)
 			set_bit(IRQTF_AFFINITY, &action->thread_flags);
-		action = action->next;
-	}
 }
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
@@ -994,7 +992,7 @@ void irq_wake_thread(unsigned int irq, void *dev_id)
 		return;
 
 	raw_spin_lock_irqsave(&desc->lock, flags);
-	for (action = desc->action; action; action = action->next) {
+	for_each_action_of_desc(desc, action) {
 		if (action->dev_id == dev_id) {
 			if (action->thread)
 				__irq_wake_thread(desc, action);
kernel/irq/proc.c +1 -1
index a2c02fd..4e1b947 100644
@@ -291,7 +291,7 @@ static int name_unique(unsigned int irq, struct irqaction *new_action)
 	int ret = 1;
 
 	raw_spin_lock_irqsave(&desc->lock, flags);
-	for (action = desc->action ; action; action = action->next) {
+	for_each_action_of_desc(desc, action) {
 		if ((action != new_action) && action->name &&
 				!strcmp(new_action->name, action->name)) {
 			ret = 0;
kernel/irq/spurious.c +1 -3
index 3214417..5707f97 100644
@@ -211,14 +211,12 @@ static void __report_bad_irq(struct irq_desc *desc, irqreturn_t action_ret)
 	 * desc->lock here. See synchronize_irq().
 	 */
 	raw_spin_lock_irqsave(&desc->lock, flags);
-	action = desc->action;
-	while (action) {
+	for_each_action_of_desc(desc, action) {
 		printk(KERN_ERR "[<%p>] %pf", action->handler, action->handler);
 		if (action->thread_fn)
 			printk(KERN_CONT " threaded [<%p>] %pf",
 					action->thread_fn, action->thread_fn);
 		printk(KERN_CONT "\n");
-		action = action->next;
 	}
 	raw_spin_unlock_irqrestore(&desc->lock, flags);
 }
#2 lore raw

Re: [tip:irq/core] genirq: Use a common macro to go through the actions list

Quoted 34 lines · tip-bot for Daniel Lezcano
Commit-ID:  aff62cf66ad6065ce04fc3454a11ec19714537fb
Gitweb:     http://git.kernel.org/tip/aff62cf66ad6065ce04fc3454a11ec19714537fb
Author:     Daniel Lezcano <[email protected]>
AuthorDate: Thu, 14 Jan 2016 10:54:13 +0100
Committer:  Thomas Gleixner <[email protected]>
CommitDate: Mon, 8 Feb 2016 11:45:21 +0100

genirq: Use a common macro to go through the actions list

The irq code browses the list of actions differently to inspect the element one by one. Even if it is not a problem, for the sake of consistent code, provide a macro similar to for_each_irq_desc in order to have the same loop to go through the actions list and use it in the code.

[ tglx: Renamed the macro ]

---
  kernel/irq/handle.c    | 5 ++---
  kernel/irq/internals.h | 3 +++
  kernel/irq/manage.c    | 8 +++-----
  kernel/irq/proc.c      | 2 +-
  kernel/irq/spurious.c  | 4 +---
  5 files changed, 10 insertions(+), 12 deletions(-)
kernel/irq/handle.c +0 -0
index 57bff78..67534d0 100644
@@ -136,10 +136,9 @@ irqreturn_t handle_irq_event_percpu(struct irq_desc *desc)
  {
  	irqreturn_t retval = IRQ_NONE;

kernel/irq/handle.c irqreturn_t handle_irq_event_percpu(struct irq_desc *desc) · line 144

Quoted 10 lines
kernel/irq/handle.c +2 -3
  	unsigned int flags = 0, irq = desc->irq_data.irq;
-	struct irqaction *action = desc->action;
+	struct irqaction *action;
 
-	/* action might have become NULL since we dropped the lock */
-	while (action) {
+	for_each_action_of_desc(desc, action) {
  		irqreturn_t res;
 
  		trace_irq_handler_entry(irq, action);

The merge lost the removal of:

action = action->next;

resulting to the NULL pointer dereference bug spotted by 01.org.

Do you want me to resend a new patch ?

-- Daniel

Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#3 lore raw

[tip:irq/core] genirq: Use a common macro to go through the actions list

In reply to Daniel Lezcano
genirq: Use a common macro to go through the actions list
Commit-ID:  f944b5a7aff05a244a6c8cac297819af09a199e4
Gitweb:     http://git.kernel.org/tip/f944b5a7aff05a244a6c8cac297819af09a199e4
Author:     Daniel Lezcano <[email protected]>
AuthorDate: Thu, 14 Jan 2016 10:54:13 +0100
Committer:  Thomas Gleixner <[email protected]>
CommitDate: Mon, 15 Feb 2016 00:07:34 +0100

genirq: Use a common macro to go through the actions list

The irq code browses the list of actions differently to inspect the element one by one. Even if it is not a problem, for the sake of consistent code, provide a macro similar to for_each_irq_desc in order to have the same loop to go through the actions list and use it in the code.

[ tglx: Renamed the macro ]

---
 kernel/irq/handle.c    | 6 ++----
 kernel/irq/internals.h | 3 +++
 kernel/irq/manage.c    | 8 +++-----
 kernel/irq/proc.c      | 2 +-
 kernel/irq/spurious.c  | 4 +---
 5 files changed, 10 insertions(+), 13 deletions(-)
kernel/irq/handle.c +2 -4
index 57bff78..a15b548 100644
@@ -136,10 +136,9 @@ irqreturn_t handle_irq_event_percpu(struct irq_desc *desc)
 {
 	irqreturn_t retval = IRQ_NONE;
 	unsigned int flags = 0, irq = desc->irq_data.irq;
-	struct irqaction *action = desc->action;
+	struct irqaction *action;
 
-	/* action might have become NULL since we dropped the lock */
-	while (action) {
+	for_each_action_of_desc(desc, action) {
 		irqreturn_t res;
 
 		trace_irq_handler_entry(irq, action);
@@ -173,7 +172,6 @@ irqreturn_t handle_irq_event_percpu(struct irq_desc *desc)
 		}
 
 		retval |= res;
-		action = action->next;
 	}
 
 	add_interrupt_randomness(irq, flags);
kernel/irq/internals.h +3 -0
index fcab63c..eab521f 100644
@@ -131,6 +131,9 @@ static inline void chip_bus_sync_unlock(struct irq_desc *desc)
 #define IRQ_GET_DESC_CHECK_GLOBAL	(_IRQ_DESC_CHECK)
 #define IRQ_GET_DESC_CHECK_PERCPU	(_IRQ_DESC_CHECK | _IRQ_DESC_PERCPU)
 
+#define for_each_action_of_desc(desc, act)			\
+	for (act = desc->act; act; act = act->next)
+
 struct irq_desc *
 __irq_get_desc_lock(unsigned int irq, unsigned long *flags, bool bus,
 		    unsigned int check);
kernel/irq/manage.c +3 -5
index 8411872..3ddd229 100644
@@ -144,13 +144,11 @@ int irq_can_set_affinity(unsigned int irq)
  */
 void irq_set_thread_affinity(struct irq_desc *desc)
 {
-	struct irqaction *action = desc->action;
+	struct irqaction *action;
 
-	while (action) {
+	for_each_action_of_desc(desc, action)
 		if (action->thread)
 			set_bit(IRQTF_AFFINITY, &action->thread_flags);
-		action = action->next;
-	}
 }
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
@@ -994,7 +992,7 @@ void irq_wake_thread(unsigned int irq, void *dev_id)
 		return;
 
 	raw_spin_lock_irqsave(&desc->lock, flags);
-	for (action = desc->action; action; action = action->next) {
+	for_each_action_of_desc(desc, action) {
 		if (action->dev_id == dev_id) {
 			if (action->thread)
 				__irq_wake_thread(desc, action);
kernel/irq/proc.c +1 -1
index a2c02fd..4e1b947 100644
@@ -291,7 +291,7 @@ static int name_unique(unsigned int irq, struct irqaction *new_action)
 	int ret = 1;
 
 	raw_spin_lock_irqsave(&desc->lock, flags);
-	for (action = desc->action ; action; action = action->next) {
+	for_each_action_of_desc(desc, action) {
 		if ((action != new_action) && action->name &&
 				!strcmp(new_action->name, action->name)) {
 			ret = 0;
kernel/irq/spurious.c +1 -3
index 3214417..5707f97 100644
@@ -211,14 +211,12 @@ static void __report_bad_irq(struct irq_desc *desc, irqreturn_t action_ret)
 	 * desc->lock here. See synchronize_irq().
 	 */
 	raw_spin_lock_irqsave(&desc->lock, flags);
-	action = desc->action;
-	while (action) {
+	for_each_action_of_desc(desc, action) {
 		printk(KERN_ERR "[<%p>] %pf", action->handler, action->handler);
 		if (action->thread_fn)
 			printk(KERN_CONT " threaded [<%p>] %pf",
 					action->thread_fn, action->thread_fn);
 		printk(KERN_CONT "\n");
-		action = action->next;
 	}
 	raw_spin_unlock_irqrestore(&desc->lock, flags);
 }