Skip to contentSkip to conversation

perf vendor events intel: Update metrics from TMAM 3.5

tip:perf/core tip-bot for Andi Kleen 1 participant 17 messages Apr 5, 2019 1 message not in the archive perf events Page 1 of 2

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

tip-bot for Andi Kleen

author merge bot
#1 lore raw
Commit-ID:  fd5500989c8f3c3944ac0a144be04bae2506f7ba
Gitweb:     https://git.kernel.org/tip/fd5500989c8f3c3944ac0a144be04bae2506f7ba
Author:     Andi Kleen <[email protected]>
AuthorDate: Thu, 14 Mar 2019 08:03:48 -0700
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 1 Apr 2019 15:22:22 -0300

perf vendor events intel: Update metrics from TMAM 3.5

Update all the Intel JSON metrics from Ahmad Yasin's TMAM 3.5 for Intel big core from Sandy Bridge to Cascade Lake.

This has many improvements and new metircs

- New TopDownL1_SMT group that provides a per SMT thread version of --topdown that does not require -a anymore. The drawback is increased multiplexing though since L1 TopDown does not fit into 4 generic counters anymore.

- Added SMT aware versions of other metrics

- Split SMT aware metrics into separate metrics to avoid unnecessary event collections

- New metrics for better branch analysis:
Estimated Branch_Mispredict_Costs, Instructions per taken Branch, Branch Instructions per Taken Branch, etc.

- Instruction mix metrics:
Instructions per load, Instructions per store, Instructions per Branch, Instructions per Call

- New Cache metrics:
Bandwidth to L1/L2/L3 caches. L1/L2/L3 misses per kilo instructions. memory level parallelism

- New memory controller metrics:
Normalized memory bandwidth in interval mode, Average memory latency, Average number of parallel read requests,

- 3DXP persistent memory metrics for Cascade Lake:
3dxp read latency, 3dxp read/write bandwidth

- Some other useful metrics like Instruction Level Parallelism,

- Various other improvements.

Not all metrics are available on all CPUs. Skylake has best coverage.

---
 .../pmu-events/arch/x86/broadwell/bdw-metrics.json | 260 +++++++++++++++---
 .../arch/x86/broadwellx/bdx-metrics.json           | 278 ++++++++++++++++---
 .../arch/x86/cascadelakex/clx-metrics.json         | 304 ++++++++++++++++++---
 .../pmu-events/arch/x86/haswell/hsw-metrics.json   | 234 +++++++++++++---
 .../pmu-events/arch/x86/haswellx/hsx-metrics.json  | 252 ++++++++++++++---
 .../pmu-events/arch/x86/ivybridge/ivb-metrics.json | 250 ++++++++++++++---
 .../pmu-events/arch/x86/ivytown/ivt-metrics.json   | 256 ++++++++++++++---
 .../pmu-events/arch/x86/jaketown/jkt-metrics.json  | 150 ++++++++--
 .../arch/x86/sandybridge/snb-metrics.json          | 144 ++++++++--
 .../pmu-events/arch/x86/skylake/skl-metrics.json   | 274 ++++++++++++++++---
 .../pmu-events/arch/x86/skylakex/skx-metrics.json  | 304 ++++++++++++++++++---
 11 files changed, 2321 insertions(+), 385 deletions(-)
tools/perf/pmu-events/arch/x86/broadwell/bdw-metrics.json +224 -36
index 00bfdb5c5acb..212b117a8ffb 100644
@@ -1,164 +1,352 @@
 [
     {
-        "BriefDescription": "Instructions Per Cycle (per logical thread)",
+        "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)",
+        "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound.",
+        "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend",
+        "MetricGroup": "TopdownL1",
+        "MetricName": "Frontend_Bound"
+    },
+    {
+        "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))",
+        "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU.",
+        "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.",
+        "MetricGroup": "TopdownL1_SMT",
+        "MetricName": "Frontend_Bound_SMT"
+    },
+    {
+        "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)",
+        "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.",
+        "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations",
+        "MetricGroup": "TopdownL1",
+        "MetricName": "Bad_Speculation"
+    },
+    {
+        "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))",
+        "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU.",
+        "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.",
+        "MetricGroup": "TopdownL1_SMT",
+        "MetricName": "Bad_Speculation_SMT"
+    },
+    {
+        "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )",
+        "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound.",
+        "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend",
+        "MetricGroup": "TopdownL1",
+        "MetricName": "Backend_Bound"
+    },
+    {
+        "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) )",
+        "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU.",
+        "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.",
+        "MetricGroup": "TopdownL1_SMT",
+        "MetricName": "Backend_Bound_SMT"
+    },
+    {
+        "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)",
+        "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category.  Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved.  Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance.  For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. ",
+        "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired",
+        "MetricGroup": "TopdownL1",
+        "MetricName": "Retiring"
+    },
+    {
+        "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))",
+        "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category.  Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved.  Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance.  For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU.",
+        "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.",
+        "MetricGroup": "TopdownL1_SMT",
+        "MetricName": "Retiring_SMT"
+    },
+    {
         "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD",
+        "BriefDescription": "Instructions Per Cycle (per logical thread)",
         "MetricGroup": "TopDownL1",
         "MetricName": "IPC"
     },
     {
-        "BriefDescription": "Uops Per Instruction",
         "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY",
-        "MetricGroup": "Pipeline",
+        "BriefDescription": "Uops Per Instruction",
+        "MetricGroup": "Pipeline;Retiring",
         "MetricName": "UPI"
     },
     {
-        "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions",
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN",
+        "BriefDescription": "Instruction per taken branch",
+        "MetricGroup": "Branches;PGO",
+        "MetricName": "IpTB"
+    },
+    {
+        "MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN",
+        "BriefDescription": "Branch instructions per taken branch. ",
+        "MetricGroup": "Branches;PGO",
+        "MetricName": "BpTB"
+    },
+    {
         "MetricExpr": "min( 1 , IDQ.MITE_UOPS / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 16 * ( ICACHE.HIT + ICACHE.MISSES ) / 4.0 ) )",
-        "MetricGroup": "Frontend",
+        "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely (includes speculatively fetches) consumed by program instructions",
+        "MetricGroup": "PGO",
         "MetricName": "IFetch_Line_Utilization"
     },
     {
-        "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)",
-        "MetricExpr": "IDQ.DSB_UOPS / ( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS )",
-        "MetricGroup": "DSB; Frontend_Bandwidth",
+        "MetricExpr": "IDQ.DSB_UOPS / (( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS ) )",
+        "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)",
+        "MetricGroup": "DSB;Frontend_Bandwidth",
         "MetricName": "DSB_Coverage"
     },
     {
-        "BriefDescription": "Cycles Per Instruction (threaded)",
         "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)",
+        "BriefDescription": "Cycles Per Instruction (threaded)",
         "MetricGroup": "Pipeline;Summary",
         "MetricName": "CPI"
     },
     {
-        "BriefDescription": "Per-thread actual clocks when the logical processor is active. This is called 'Clockticks' in VTune.",
         "MetricExpr": "CPU_CLK_UNHALTED.THREAD",
+        "BriefDescription": "Per-thread actual clocks when the logical processor is active.",
         "MetricGroup": "Summary",
         "MetricName": "CLKS"
     },
     {
-        "BriefDescription": "Total issue-pipeline slots",
-        "MetricExpr": "4*(( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)",
+        "MetricExpr": "4 * cycles",
+        "BriefDescription": "Total issue-pipeline slots (per core)",
         "MetricGroup": "TopDownL1",
         "MetricName": "SLOTS"
     },
     {
-        "BriefDescription": "Total number of retired Instructions",
+        "MetricExpr": "4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
+        "BriefDescription": "Total issue-pipeline slots (per core)",
+        "MetricGroup": "TopDownL1_SMT",
+        "MetricName": "SLOTS_SMT"
+    },
+    {
+        "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_LOADS",
+        "BriefDescription": "Instructions per Load (lower number means loads are more frequent)",
+        "MetricGroup": "Instruction_Type;L1_Bound",
+        "MetricName": "IpL"
+    },
+    {
+        "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_STORES",
+        "BriefDescription": "Instructions per Store",
+        "MetricGroup": "Instruction_Type;Store_Bound",
+        "MetricName": "IpS"
+    },
+    {
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES",
+        "BriefDescription": "Instructions per Branch",
+        "MetricGroup": "Branches;Instruction_Type;Port_5;Port_6",
+        "MetricName": "IpB"
+    },
+    {
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL",
+        "BriefDescription": "Instruction per (near) call",
+        "MetricGroup": "Branches",
+        "MetricName": "IpCall"
+    },
+    {
         "MetricExpr": "INST_RETIRED.ANY",
+        "BriefDescription": "Total number of retired Instructions",
         "MetricGroup": "Summary",
         "MetricName": "Instructions"
     },
     {
+        "MetricExpr": "INST_RETIRED.ANY / cycles",
         "BriefDescription": "Instructions Per Cycle (per physical core)",
-        "MetricExpr": "INST_RETIRED.ANY / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)",
         "MetricGroup": "SMT",
         "MetricName": "CoreIPC"
     },
     {
+        "MetricExpr": "INST_RETIRED.ANY / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
+        "BriefDescription": "Instructions Per Cycle (per physical core)",
+        "MetricGroup": "SMT",
+        "MetricName": "CoreIPC_SMT"
+    },
+    {
+        "MetricExpr": "(( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / cycles",
+        "BriefDescription": "Floating Point Operations Per Cycle",
+        "MetricGroup": "FLOPS",
+        "MetricName": "FLOPc"
+    },
+    {
+        "MetricExpr": "(( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
+        "BriefDescription": "Floating Point Operations Per Cycle",
+        "MetricGroup": "FLOPS_SMT",
+        "MetricName": "FLOPc_SMT"
+    },
+    {
+        "MetricExpr": "UOPS_EXECUTED.THREAD / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2 ) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)",
         "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)",
-        "MetricExpr": "UOPS_EXECUTED.THREAD / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)",
         "MetricGroup": "Pipeline;Ports_Utilization",
         "MetricName": "ILP"
     },
     {
-        "BriefDescription": "Average Branch Address Clear Cost (fraction of cycles)",
-        "MetricExpr": "2* (( RS_EVENTS.EMPTY_CYCLES - ICACHE.IFDATA_STALL  - (( 14 * ITLB_MISSES.STLB_HIT + cpu@ITLB_MISSES.WALK_DURATION\\,cmask\\=1@ + 7* ITLB_MISSES.WALK_COMPLETED )) ) / RS_EVENTS.EMPTY_END)",
-        "MetricGroup": "Unknown_Branches",
-        "MetricName": "BAClear_Cost"
+        "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * cycles)) * (12 * ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT + BACLEARS.ANY ) / cycles) / (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * cycles)) ) * (4 * cycles) / BR_MISP_RETIRED.ALL_BRANCHES",
+        "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per branch misprediction (jeclear and baclear)",
+        "MetricGroup": "Branch_Mispredicts",
+        "MetricName": "Branch_Misprediction_Cost"
     },
     {
+        "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * (12 * ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT + BACLEARS.ANY ) / cycles) / (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) / BR_MISP_RETIRED.ALL_BRANCHES",
+        "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per branch misprediction (jeclear and baclear)",
+        "MetricGroup": "Branch_Mispredicts_SMT",
+        "MetricName": "Branch_Misprediction_Cost_SMT"
+    },
+    {
+        "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES",
+        "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)",
+        "MetricGroup": "Branch_Mispredicts",
+        "MetricName": "IpMispredict"
+    },
+    {
+        "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
         "BriefDescription": "Core actual clocks when any thread is active on the physical core",
-        "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "SMT",
         "MetricName": "CORE_CLKS"
     },
     {
-        "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads",
         "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_UOPS_RETIRED.L1_MISS + mem_load_uops_retired.hit_lfb )",
+        "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)",
         "MetricGroup": "Memory_Bound;Memory_Lat",
         "MetricName": "Load_Miss_Real_Latency"
     },
     {
-        "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)",
-        "MetricExpr": "L1D_PEND_MISS.PENDING / (( cpu@l1d_pend_miss.pending_cycles\\,any\\=1@ / 2) if #SMT_on else L1D_PEND_MISS.PENDING_CYCLES)",
+        "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES",
+        "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-thread)",
         "MetricGroup": "Memory_Bound;Memory_BW",
         "MetricName": "MLP"
     },
     {
+        "MetricExpr": "( cpu@ITLB_MISSES.WALK_DURATION\\,cmask\\=1@ + cpu@DTLB_LOAD_MISSES.WALK_DURATION\\,cmask\\=1@ + cpu@DTLB_STORE_MISSES.WALK_DURATION\\,cmask\\=1@ + 7 * ( DTLB_STORE_MISSES.WALK_COMPLETED + DTLB_LOAD_MISSES.WALK_COMPLETED + ITLB_MISSES.WALK_COMPLETED ) ) / cycles",
         "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
-        "MetricExpr": "( cpu@ITLB_MISSES.WALK_DURATION\\,cmask\\=1@ + cpu@DTLB_LOAD_MISSES.WALK_DURATION\\,cmask\\=1@ + cpu@DTLB_STORE_MISSES.WALK_DURATION\\,cmask\\=1@ + 7*(DTLB_STORE_MISSES.WALK_COMPLETED+DTLB_LOAD_MISSES.WALK_COMPLETED+ITLB_MISSES.WALK_COMPLETED)) / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)",
         "MetricGroup": "TLB",
         "MetricName": "Page_Walks_Utilization"
     },
     {
-        "BriefDescription": "Average CPU Utilization",
+        "MetricExpr": "( cpu@ITLB_MISSES.WALK_DURATION\\,cmask\\=1@ + cpu@DTLB_LOAD_MISSES.WALK_DURATION\\,cmask\\=1@ + cpu@DTLB_STORE_MISSES.WALK_DURATION\\,cmask\\=1@ + 7 * ( DTLB_STORE_MISSES.WALK_COMPLETED + DTLB_LOAD_MISSES.WALK_COMPLETED + ITLB_MISSES.WALK_COMPLETED ) ) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
+        "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
+        "MetricGroup": "TLB_SMT",
+        "MetricName": "Page_Walks_Utilization_SMT"
+    },
+    {
+        "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time",
+        "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]",
+        "MetricGroup": "Memory_BW",
+        "MetricName": "L1D_Cache_Fill_BW"
+    },
+    {
+        "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time",
+        "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]",
+        "MetricGroup": "Memory_BW",
+        "MetricName": "L2_Cache_Fill_BW"
+    },
+    {
+        "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time",
+        "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]",
+        "MetricGroup": "Memory_BW",
+        "MetricName": "L3_Cache_Fill_BW"
+    },
+    {
+        "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L1_MISS / INST_RETIRED.ANY",
+        "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads",
+        "MetricGroup": "Cache_Misses;",
+        "MetricName": "L1MPKI"
+    },
+    {
+        "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY",
+        "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads",
+        "MetricGroup": "Cache_Misses;",
+        "MetricName": "L2MPKI"
+    },
+    {
+        "MetricExpr": "1000 * L2_RQSTS.MISS / INST_RETIRED.ANY",
+        "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)",
+        "MetricGroup": "Cache_Misses;",
+        "MetricName": "L2MPKI_All"
+    },
+    {
+        "MetricExpr": "1000 * ( L2_RQSTS.REFERENCES - L2_RQSTS.MISS ) / INST_RETIRED.ANY",
+        "BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)",
+        "MetricGroup": "Cache_Misses;",
+        "MetricName": "L2HPKI_All"
+    },
+    {
+        "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L3_MISS / INST_RETIRED.ANY",
+        "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads",
+        "MetricGroup": "Cache_Misses;",
+        "MetricName": "L3MPKI"
+    },
+    {
         "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@",
+        "BriefDescription": "Average CPU Utilization",
         "MetricGroup": "Summary",
         "MetricName": "CPU_Utilization"
     },
     {
+        "MetricExpr": "( (( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / 1000000000 ) / duration_time",
         "BriefDescription": "Giga Floating Point Operations Per Second",
-        "MetricExpr": "(( 1*( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2* FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4*( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8* FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / 1000000000 / duration_time",
         "MetricGroup": "FLOPS;Summary",
         "MetricName": "GFLOPs"
     },
     {
-        "BriefDescription": "Average Frequency Utilization relative nominal frequency",
         "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC",
+        "BriefDescription": "Average Frequency Utilization relative nominal frequency",
         "MetricGroup": "Power",
         "MetricName": "Turbo_Utilization"
     },
     {
-        "BriefDescription": "Fraction of cycles where both hardware threads were active",
         "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0",
+        "BriefDescription": "Fraction of cycles where both hardware threads were active",
         "MetricGroup": "SMT;Summary",
         "MetricName": "SMT_2T_Utilization"
     },
     {
-        "BriefDescription": "Fraction of cycles spent in Kernel mode",
         "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:u / CPU_CLK_UNHALTED.REF_TSC",
+        "BriefDescription": "Fraction of cycles spent in Kernel mode",
         "MetricGroup": "Summary",
         "MetricName": "Kernel_Utilization"
     },
     {
-        "BriefDescription": "C3 residency percent per core",
+        "MetricExpr": "64 * ( arb@event\\=0x81\\,umask\\=0x1@ + arb@event\\=0x84\\,umask\\=0x1@ ) / 1000000 / duration_time / 1000",
+        "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]",
+        "MetricGroup": "Memory_BW",
+        "MetricName": "DRAM_BW_Use"
+    },
+    {
         "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100",
         "MetricGroup": "Power",
+        "BriefDescription": "C3 residency percent per core",
         "MetricName": "C3_Core_Residency"
     },
     {
-        "BriefDescription": "C6 residency percent per core",
         "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100",
         "MetricGroup": "Power",
+        "BriefDescription": "C6 residency percent per core",
         "MetricName": "C6_Core_Residency"
     },
     {
-        "BriefDescription": "C7 residency percent per core",
         "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100",
         "MetricGroup": "Power",
+        "BriefDescription": "C7 residency percent per core",
         "MetricName": "C7_Core_Residency"
     },
     {
-        "BriefDescription": "C2 residency percent per package",
         "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100",
         "MetricGroup": "Power",
+        "BriefDescription": "C2 residency percent per package",
         "MetricName": "C2_Pkg_Residency"
     },
     {
-        "BriefDescription": "C3 residency percent per package",
         "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100",
         "MetricGroup": "Power",
+        "BriefDescription": "C3 residency percent per package",
         "MetricName": "C3_Pkg_Residency"
     },
     {
-        "BriefDescription": "C6 residency percent per package",
         "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100",
         "MetricGroup": "Power",
+        "BriefDescription": "C6 residency percent per package",
         "MetricName": "C6_Pkg_Residency"
     },
     {
-        "BriefDescription": "C7 residency percent per package",
         "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100",
         "MetricGroup": "Power",
+        "BriefDescription": "C7 residency percent per package",
         "MetricName": "C7_Pkg_Residency"
     }
 ]
tools/perf/pmu-events/arch/x86/broadwellx/bdx-metrics.json +242 -36

406 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json +267 -37

431 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/haswell/hsw-metrics.json +199 -35

357 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/haswellx/hsx-metrics.json +217 -35

375 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json +213 -37

377 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json +219 -37

383 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/jaketown/jkt-metrics.json +121 -29

261 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/sandybridge/snb-metrics.json +115 -29

22 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/skylake/skl-metrics.json +237 -37

274 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json +267 -37

304 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Part of the diff is not shown here. View the raw message.

author merge bot
#2 lore raw

[tip:perf/core] perf vendor events intel: Update Broadwell-DE events to v7

In reply to a message not in the archive
perf vendor events intel: Update Broadwell-DE events to v7
Commit-ID:  d2243329ef3c5107d00dee4327a9884a394ef715
Gitweb:     https://git.kernel.org/tip/d2243329ef3c5107d00dee4327a9884a394ef715
Author:     Andi Kleen <[email protected]>
AuthorDate: Thu, 14 Mar 2019 08:37:33 -0700
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 1 Apr 2019 15:23:14 -0300

perf vendor events intel: Update Broadwell-DE events to v7

---
 tools/perf/pmu-events/arch/x86/broadwellde/cache.json    | 4 ++--
 tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json | 6 +-----
 2 files changed, 3 insertions(+), 7 deletions(-)
tools/perf/pmu-events/arch/x86/broadwellde/cache.json +2 -2
index 4ad425312bdc..bf243fe2a0ec 100644
@@ -439,7 +439,7 @@
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
+        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-splitted load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -451,7 +451,7 @@
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
+        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-splitted store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
         "SampleAfterValue": "100003",
         "L1_Hit_Indication": "1",
         "CounterHTOff": "0,1,2,3"
tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json +1 -5
index 0d04bf9db000..e2f0540625a2 100644
@@ -1,6 +1,5 @@
 [
     {
-        "EventCode": "0x00",
         "UMask": "0x1",
         "BriefDescription": "Instructions retired from execution.",
         "Counter": "Fixed counter 0",
@@ -10,7 +9,6 @@
         "CounterHTOff": "Fixed counter 0"
     },
     {
-        "EventCode": "0x00",
         "UMask": "0x2",
         "BriefDescription": "Core cycles when the thread is not in halt state",
         "Counter": "Fixed counter 1",
@@ -20,7 +18,6 @@
         "CounterHTOff": "Fixed counter 1"
     },
     {
-        "EventCode": "0x00",
         "UMask": "0x2",
         "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
         "Counter": "Fixed counter 1",
@@ -30,7 +27,6 @@
         "CounterHTOff": "Fixed counter 1"
     },
     {
-        "EventCode": "0x00",
         "UMask": "0x3",
         "BriefDescription": "Reference cycles when the core is not in halt state.",
         "Counter": "Fixed counter 2",
@@ -322,7 +318,7 @@
         "BriefDescription": "Stalls caused by changing prefix length of the instruction.",
         "Counter": "0,1,2,3",
         "EventName": "ILD_STALL.LCP",
-        "PublicDescription": "This event counts stalls occurred due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
+        "PublicDescription": "This event counts stalls occured due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
author merge bot
#3 lore raw

[tip:perf/core] perf vendor events intel: Update Skylake events to v42

In reply to a message not in the archive
perf vendor events intel: Update Skylake events to v42
Commit-ID:  24339348b9153047c08b5879bc69d3327cb07783
Gitweb:     https://git.kernel.org/tip/24339348b9153047c08b5879bc69d3327cb07783
Author:     Andi Kleen <[email protected]>
AuthorDate: Thu, 14 Mar 2019 08:38:43 -0700
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 1 Apr 2019 15:23:18 -0300

perf vendor events intel: Update Skylake events to v42

---
 tools/perf/pmu-events/arch/x86/skylake/cache.json  | 2193 +++++++++++++++++++-
 .../perf/pmu-events/arch/x86/skylake/frontend.json |   14 +-
 tools/perf/pmu-events/arch/x86/skylake/memory.json | 1121 +++++++++-
 .../perf/pmu-events/arch/x86/skylake/pipeline.json |   39 +-
 4 files changed, 3181 insertions(+), 186 deletions(-)
tools/perf/pmu-events/arch/x86/skylake/cache.json +2091 -102
index 54bfe9e4045c..720458139049 100644
@@ -60,10 +60,10 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "Counts the number of demand Data Read requests that hit L2 cache. Only non rejected loads are counted.",
+        "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache",
         "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x41",
+        "UMask": "0xc1",
         "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
         "SampleAfterValue": "200003",
         "BriefDescription": "Demand Data Read requests that hit L2 cache",
@@ -73,7 +73,7 @@
         "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that hit L2 cache.",
         "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x42",
+        "UMask": "0xc2",
         "EventName": "L2_RQSTS.RFO_HIT",
         "SampleAfterValue": "200003",
         "BriefDescription": "RFO requests that hit L2 cache",
@@ -83,7 +83,7 @@
         "PublicDescription": "Counts L2 cache hits when fetching instructions, code reads.",
         "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x44",
+        "UMask": "0xc4",
         "EventName": "L2_RQSTS.CODE_RD_HIT",
         "SampleAfterValue": "200003",
         "BriefDescription": "L2 cache hits when fetching instructions, code reads.",
@@ -482,7 +482,7 @@
     },
     {
         "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.\r\n",
+        "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.",
         "EventCode": "0xD1",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
@@ -554,7 +554,7 @@
     },
     {
         "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready. \r\n",
+        "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready.",
         "EventCode": "0xD1",
         "Counter": "0,1,2,3",
         "UMask": "0x40",
@@ -661,13 +661,13 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache.",
+        "PublicDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF",
         "EventCode": "0xF2",
         "Counter": "0,1,2,3",
         "UMask": "0x4",
         "EventName": "L2_LINES_OUT.USELESS_PREF",
         "SampleAfterValue": "200003",
-        "BriefDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache",
+        "BriefDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
@@ -690,249 +690,2238 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3fc0400001 ",
+        "MSRValue": "0x3FC0408000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & L4_HIT_LOCAL_L4 & ANY_SNOOP",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000400001 ",
+        "MSRValue": "0x1000408000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & L4_HIT_LOCAL_L4 & SNOOP_HITM",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400400001 ",
+        "MSRValue": "0x0400408000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & L4_HIT_LOCAL_L4 & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200400001 ",
+        "MSRValue": "0x0200408000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & L4_HIT_LOCAL_L4 & SNOOP_MISS",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100400001 ",
+        "MSRValue": "0x0100408000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & L4_HIT_LOCAL_L4 & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080400001 ",
+        "MSRValue": "0x0080408000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & L4_HIT_LOCAL_L4 & SNOOP_NONE",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3fc01c0001 ",
+        "MSRValue": "0x0040408000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & L3_HIT & ANY_SNOOP",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10001c0001 ",
+        "MSRValue": "0x3FC01C8000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04001c0001 ",
+        "MSRValue": "0x10001C8000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts demand data reads that hit in the L3 and the snoops sent to sibling cores return clean response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02001c0001 ",
+        "MSRValue": "0x04001C8000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts demand data reads that hit in the L3 and the snoops sent to sibling cores return clean response.",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01001c0001 ",
+        "MSRValue": "0x02001C8000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00801c0001 ",
+        "MSRValue": "0x01001C8000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & L3_HIT & SNOOP_NONE",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3fc0020001 ",
+        "MSRValue": "0x00801C8000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000020001 ",
+        "MSRValue": "0x00401C8000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400020001 ",
+        "MSRValue": "0x3FC0108000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200020001 ",
+        "MSRValue": "0x1000108000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100020001 ",
+        "MSRValue": "0x0400108000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080020001 ",
+        "MSRValue": "0x0200108000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100108000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080108000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040108000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0088000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000088000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400088000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200088000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100088000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080088000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040088000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0048000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000048000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400048000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200048000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100048000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080048000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040048000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0028000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000028000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400028000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200028000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100028000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080028000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040028000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts any other requests have any response type.",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0000018000",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.OTHER.ANY_RESPONSE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts any other requests have any response type.",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0400004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000400004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400400004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200400004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100400004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080400004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040400004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC01C0004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x10001C0004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x04001C0004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x02001C0004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x01001C0004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x00801C0004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x00401C0004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0100004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000100004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400100004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200100004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100100004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080100004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040100004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0080004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000080004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400080004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200080004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100080004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080080004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040080004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0040004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000040004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400040004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200040004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100040004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080040004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040040004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0020004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000020004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400020004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200020004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100020004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080020004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040020004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that have any response type.",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0000010004",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that have any response type.",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0400002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000400002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400400002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200400002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100400002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080400002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040400002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC01C0002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x10001C0002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x04001C0002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x02001C0002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x01001C0002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x00801C0002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x00401C0002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0100002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000100002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400100002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200100002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100100002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080100002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040100002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0080002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000080002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400080002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200080002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100080002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080080002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040080002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0040002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000040002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400040002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200040002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100040002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080040002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040040002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0020002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000020002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400020002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200020002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100020002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080020002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs)",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040020002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts all demand data writes (RFOs) have any response type.",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0000010002",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts all demand data writes (RFOs) have any response type.",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0400001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000400001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400400001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200400001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100400001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080400001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040400001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC01C0001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x10001C0001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x04001C0001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x02001C0001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x01001C0001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x00801C0001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x00401C0001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0100001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000100001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400100001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200100001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100100001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080100001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040100001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0080001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000080001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400080001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200080001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100080001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080080001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040080001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0040001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000040001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400040001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200040001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100040001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080040001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040040001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x3FC0020001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x1000020001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_HITM",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0400020001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0200020001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0100020001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0080020001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Counts demand data reads",
+        "Offcore": "1",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PublicDescription": "Counts demand data reads",
+        "EventCode": "0xB7, 0xBB",
+        "MSRValue": "0x0040020001",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SPL_HIT",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts demand data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts demand data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010001 ",
+        "MSRValue": "0x0000010001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts demand data reads that have any response type.",
+        "BriefDescription": "Counts demand data reads have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     }
tools/perf/pmu-events/arch/x86/skylake/frontend.json +7 -7
index 578dff5bd823..7fa95a35e3ca 100644
@@ -177,7 +177,7 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "Counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding 4  x when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when: a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread. b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions).  c. Instruction Decode Queue (IDQ) delivers four uops.",
+        "PublicDescription": "Counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding \u201c4 \u2013 x\u201d when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when: a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread. b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions).  c. Instruction Decode Queue (IDQ) delivers four uops.",
         "EventCode": "0x9C",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
@@ -242,7 +242,7 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "Counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. MM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.Penalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 02 cycles.",
+        "PublicDescription": "Counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. MM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.Penalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 0\u20132 cycles.",
         "EventCode": "0xAB",
         "Counter": "0,1,2,3",
         "UMask": "0x2",
@@ -253,7 +253,7 @@
     },
     {
         "PEBS": "1",
-        "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss. \r\n",
+        "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.",
         "EventCode": "0xC6",
         "MSRValue": "0x11",
         "Counter": "0,1,2,3",
@@ -360,7 +360,7 @@
     },
     {
         "PEBS": "1",
-        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops. \r\n",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops.",
         "EventCode": "0xC6",
         "MSRValue": "0x400806",
         "Counter": "0,1,2,3",
@@ -374,7 +374,7 @@
     },
     {
         "PEBS": "1",
-        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.\r\n",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.",
         "EventCode": "0xC6",
         "MSRValue": "0x401006",
         "Counter": "0,1,2,3",
@@ -388,7 +388,7 @@
     },
     {
         "PEBS": "1",
-        "PublicDescription": "Counts retired instructions that are delivered to the back-end  after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.\r\n",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end  after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.",
         "EventCode": "0xC6",
         "MSRValue": "0x402006",
         "Counter": "0,1,2,3",
@@ -454,7 +454,7 @@
     },
     {
         "PEBS": "1",
-        "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.\r\n",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.",
         "EventCode": "0xC6",
         "MSRValue": "0x100206",
         "Counter": "0,1,2,3",
tools/perf/pmu-events/arch/x86/skylake/memory.json +1055 -66

553 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/skylake/pipeline.json +0 -4
index bc6d2afbcd8a..4a891fbbc4bb 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

"EventName": "CPU_CLK_UNHALTED.REF_TSC",
@@ -121,7 +117,7 @@

         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to Mixing Intel AVX and Intel SSE Code section of the Optimization Guide.",
+        "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to \u201cMixing Intel AVX and Intel SSE Code\u201d section of the Optimization Guide.",
         "EventCode": "0x0E",
         "Counter": "0,1,2,3",
         "UMask": "0x2",
@@ -247,6 +243,16 @@
         "BriefDescription": "Demand load dispatches that hit L1D fill buffer (FB) allocated for software prefetch.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
+    {
+        "PublicDescription": "This event counts cycles during which the microcode scoreboard stalls happen.",
+        "EventCode": "0x59",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "PARTIAL_RAT_STALLS.SCOREBOARD",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "Cycles where the pipeline is stalled due to serializing operations.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
     {
         "PublicDescription": "Counts cycles during which the reservation station (RS) is empty for the thread.; Note: In ST-mode, not active thread should drive 0. This is usually caused by severely costly branch mispredictions, or allocator/FE issues.",
         "EventCode": "0x5E",
@@ -361,8 +367,8 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "Counts resource-related stall cycles. Reasons for stalls can be as follows:a. *any* u-arch structure got full (LB, SB, RS, ROB, BOB, LM, Physical Register Reclaim Table (PRRT), or Physical History Table (PHT) slots).b. *any* u-arch structure got empty (like INT/SIMD FreeLists).c. FPU control word (FPCW), MXCSR.and others. This counts cycles that the pipeline back-end blocked uop delivery from the front-end.",
-        "EventCode": "0xA2",
+        "PublicDescription": "Counts resource-related stall cycles.",
+        "EventCode": "0xa2",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "RESOURCE_STALLS.ANY",
@@ -735,7 +741,7 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts cycles without actually retired uops.",
+        "PublicDescription": "This event counts cycles without actually retired uops.",
         "EventCode": "0xC2",
         "Invert": "1",
         "Counter": "0,1,2,3",
@@ -759,6 +765,7 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
+        "PublicDescription": "Number of machine clears (nukes) of any type.",
         "EventCode": "0xC3",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
@@ -839,14 +846,15 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts not taken branch instructions retired.",
+        "PEBS": "1",
+        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts not taken branch instructions retired.",
         "EventCode": "0xC4",
         "Counter": "0,1,2,3",
         "UMask": "0x10",
         "Errata": "SKL091",
         "EventName": "BR_INST_RETIRED.NOT_TAKEN",
         "SampleAfterValue": "400009",
-        "BriefDescription": "Not taken branch instructions retired.",
+        "BriefDescription": "Counts all not taken macro branch instructions retired.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
@@ -924,7 +932,7 @@
         "UMask": "0x20",
         "EventName": "BR_MISP_RETIRED.NEAR_TAKEN",
         "SampleAfterValue": "400009",
-        "BriefDescription": "Number of near branch instructions retired that were mispredicted and taken. ",
+        "BriefDescription": "Number of near branch instructions retired that were mispredicted and taken.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
@@ -937,6 +945,15 @@
         "BriefDescription": "Increments whenever there is an update to the LBR array.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
+    {
+        "EventCode": "0xCC",
+        "Counter": "0,1,2,3",
+        "UMask": "0x40",
+        "EventName": "ROB_MISC_EVENTS.PAUSE_INST",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "Number of retired PAUSE instructions (that do not end up with a VMExit to the VMM; TSX aborted Instructions may be counted). This event is not supported on first SKL and KBL products.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
     {
         "PublicDescription": "Counts the number of times the front-end is resteered when it finds a branch instruction in a fetch line. This occurs for the first time a branch instruction is fetched or when the branch is not tracked by the BPU (Branch Prediction Unit) anymore.",
         "EventCode": "0xE6",

Part of the diff is not shown here. View the raw message.

author merge bot
#4 lore raw

[tip:perf/core] perf vendor events intel: Update SkylakeX events to v1.12

In reply to a message not in the archive
perf vendor events intel: Update SkylakeX events to v1.12
Commit-ID:  19f2d40c57141bf586c5b4f6bd5d8fedf7b54f3e
Gitweb:     https://git.kernel.org/tip/19f2d40c57141bf586c5b4f6bd5d8fedf7b54f3e
Author:     Andi Kleen <[email protected]>
AuthorDate: Thu, 14 Mar 2019 08:39:05 -0700
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 1 Apr 2019 15:23:21 -0300

perf vendor events intel: Update SkylakeX events to v1.12

---
 tools/perf/pmu-events/arch/x86/skylakex/cache.json | 786 +++++++++------------
 .../arch/x86/skylakex/floating-point.json          |   2 -
 .../pmu-events/arch/x86/skylakex/frontend.json     | 234 +++---
 .../perf/pmu-events/arch/x86/skylakex/memory.json  | 751 +++++++++-----------
 .../pmu-events/arch/x86/skylakex/pipeline.json     | 173 +++--
 5 files changed, 899 insertions(+), 1047 deletions(-)
tools/perf/pmu-events/arch/x86/skylakex/cache.json +350 -436
index 5c9940866acd..24df183693fa 100644
@@ -61,17 +61,17 @@
     },
     {
         "EventCode": "0x24",
-        "UMask": "0x41",
+        "UMask": "0xc1",
         "BriefDescription": "Demand Data Read requests that hit L2 cache",
         "Counter": "0,1,2,3",
         "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
-        "PublicDescription": "Counts the number of demand Data Read requests that hit L2 cache. Only non rejected loads are counted.",
+        "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache",
         "SampleAfterValue": "200003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
         "EventCode": "0x24",
-        "UMask": "0x42",
+        "UMask": "0xc2",
         "BriefDescription": "RFO requests that hit L2 cache",
         "Counter": "0,1,2,3",
         "EventName": "L2_RQSTS.RFO_HIT",
@@ -81,7 +81,7 @@
     },
     {
         "EventCode": "0x24",
-        "UMask": "0x44",
+        "UMask": "0xc4",
         "BriefDescription": "L2 cache hits when fetching instructions, code reads.",
         "Counter": "0,1,2,3",
         "EventName": "L2_RQSTS.CODE_RD_HIT",
@@ -165,6 +165,7 @@
         "BriefDescription": "Core-originated cacheable demand requests missed L3",
         "Counter": "0,1,2,3",
         "EventName": "LONGEST_LAT_CACHE.MISS",
+        "Errata": "SKL057",
         "PublicDescription": "Counts core-originated cacheable requests that miss the L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches from L1 and L2. It does not include all misses to the L3.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
@@ -175,28 +176,29 @@
         "BriefDescription": "Core-originated cacheable demand requests that refer to L3",
         "Counter": "0,1,2,3",
         "EventName": "LONGEST_LAT_CACHE.REFERENCE",
-        "PublicDescription": "Counts core-originated cacheable requests to the L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches from L1 and L2.  It does not include all accesses to the L3.",
+        "Errata": "SKL057",
+        "PublicDescription": "Counts core-originated cacheable requests to the  L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches from L1 and L2.  It does not include all accesses to the L3.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
         "EventCode": "0x48",
         "UMask": "0x1",
-        "BriefDescription": "L1D miss outstandings duration in cycles",
+        "BriefDescription": "Cycles with L1D load Misses outstanding.",
         "Counter": "0,1,2,3",
-        "EventName": "L1D_PEND_MISS.PENDING",
-        "PublicDescription": "Counts duration of L1D miss outstanding, that is each cycle number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch.Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.",
+        "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
+        "CounterMask": "1",
+        "PublicDescription": "Counts duration of L1D miss outstanding in cycles.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
         "EventCode": "0x48",
         "UMask": "0x1",
-        "BriefDescription": "Cycles with L1D load Misses outstanding.",
+        "BriefDescription": "L1D miss outstandings duration in cycles",
         "Counter": "0,1,2,3",
-        "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
-        "CounterMask": "1",
-        "PublicDescription": "Counts duration of L1D miss outstanding in cycles.",
+        "EventName": "L1D_PEND_MISS.PENDING",
+        "PublicDescription": "Counts duration of L1D miss outstanding, that is each cycle number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch.Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -234,21 +236,21 @@
     {
         "EventCode": "0x60",
         "UMask": "0x1",
-        "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.",
+        "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD",
-        "PublicDescription": "Counts the number of offcore outstanding Demand Data Read transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor. See the corresponding Umask under OFFCORE_REQUESTS.Note: A prefetch promoted to Demand is counted from the promotion point.",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD",
+        "CounterMask": "1",
+        "PublicDescription": "Counts cycles when offcore outstanding Demand Data Read transactions are present in the super queue (SQ). A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation).",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
         "EventCode": "0x60",
         "UMask": "0x1",
-        "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore",
+        "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD",
-        "CounterMask": "1",
-        "PublicDescription": "Counts cycles when offcore outstanding Demand Data Read transactions are present in the super queue (SQ). A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation).",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD",
+        "PublicDescription": "Counts the number of offcore outstanding Demand Data Read transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor. See the corresponding Umask under OFFCORE_REQUESTS.Note: A prefetch promoted to Demand is counted from the promotion point.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -307,21 +309,21 @@
     {
         "EventCode": "0x60",
         "UMask": "0x8",
-        "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore",
+        "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD",
-        "PublicDescription": "Counts the number of offcore outstanding cacheable Core Data Read transactions in the super queue every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD",
+        "CounterMask": "1",
+        "PublicDescription": "Counts cycles when offcore outstanding cacheable Core Data Read transactions are present in the super queue. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
         "EventCode": "0x60",
         "UMask": "0x8",
-        "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.",
+        "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD",
-        "CounterMask": "1",
-        "PublicDescription": "Counts cycles when offcore outstanding cacheable Core Data Read transactions are present in the super queue. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD",
+        "PublicDescription": "Counts the number of offcore outstanding cacheable Core Data Read transactions in the super queue every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -486,7 +488,7 @@
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_RETIRED.L1_HIT",
-        "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.\r\n",
+        "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -558,7 +560,7 @@
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_RETIRED.FB_HIT",
-        "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready. \r\n",
+        "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready.",
         "SampleAfterValue": "100007",
         "CounterHTOff": "0,1,2,3"
     },
@@ -690,6 +692,7 @@
         "BriefDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared state. A non-threaded event.",
         "Counter": "0,1,2,3",
         "EventName": "L2_LINES_OUT.SILENT",
+        "PublicDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared or Exclusive state. A non-threaded event.",
         "SampleAfterValue": "200003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -699,17 +702,18 @@
         "BriefDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3.  Clean lines may either be allocated in L3 or dropped",
         "Counter": "0,1,2,3",
         "EventName": "L2_LINES_OUT.NON_SILENT",
-        "PublicDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3.  Clean lines may either be allocated in L3 or dropped.",
+        "PublicDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines are in Modified state. Modified lines are written back to L3",
         "SampleAfterValue": "200003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
         "EventCode": "0xF2",
         "UMask": "0x4",
-        "BriefDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache",
+        "BriefDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF",
+        "Deprecated": "1",
         "Counter": "0,1,2,3",
         "EventName": "L2_LINES_OUT.USELESS_PREF",
-        "PublicDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache.",
+        "PublicDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF",
         "SampleAfterValue": "200003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -736,12 +740,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts demand data reads that have any response type.",
-        "MSRValue": "0x0000010001 ",
+        "BriefDescription": "Counts demand data reads have any response type.",
+        "MSRValue": "0x0000010001",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts demand data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts demand data reads have any response type.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -749,12 +753,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
-        "MSRValue": "0x01003c0001 ",
+        "BriefDescription": "Counts demand data reads TBD TBD",
+        "MSRValue": "0x01003C0001",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts demand data reads TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -762,25 +766,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x04003c0001 ",
+        "BriefDescription": "Counts demand data reads TBD TBD",
+        "MSRValue": "0x04003C0001",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "CounterHTOff": "0,1,2,3"
-    },
-    {
-        "Offcore": "1",
-        "EventCode": "0xB7, 0xBB",
-        "UMask": "0x1",
-        "BriefDescription": "DEMAND_DATA_RD & L3_HIT & SNOOP_HIT_WITH_FWD",
-        "MSRValue": "0x08003c0001 ",
-        "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts demand data reads TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -788,12 +779,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x10003c0001 ",
+        "BriefDescription": "Counts demand data reads TBD TBD",
+        "MSRValue": "0x10003C0001",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts demand data reads TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -801,12 +792,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts demand data reads that hit in the L3.",
-        "MSRValue": "0x3f803c0001 ",
+        "BriefDescription": "Counts demand data reads TBD TBD",
+        "MSRValue": "0x3F803C0001",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts demand data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts demand data reads TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -814,12 +805,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand data writes (RFOs) that have any response type.",
-        "MSRValue": "0x0000010002 ",
+        "BriefDescription": "Counts all demand data writes (RFOs) have any response type.",
+        "MSRValue": "0x0000010002",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand data writes (RFOs) that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all demand data writes (RFOs) have any response type.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -827,12 +818,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
-        "MSRValue": "0x01003c0002 ",
+        "BriefDescription": "Counts all demand data writes (RFOs) TBD TBD",
+        "MSRValue": "0x01003C0002",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all demand data writes (RFOs) TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -840,12 +831,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x04003c0002 ",
+        "BriefDescription": "Counts all demand data writes (RFOs) TBD TBD",
+        "MSRValue": "0x04003C0002",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all demand data writes (RFOs) TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -853,25 +844,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "DEMAND_RFO & L3_HIT & SNOOP_HIT_WITH_FWD",
-        "MSRValue": "0x08003c0002 ",
-        "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "CounterHTOff": "0,1,2,3"
-    },
-    {
-        "Offcore": "1",
-        "EventCode": "0xB7, 0xBB",
-        "UMask": "0x1",
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x10003c0002 ",
+        "BriefDescription": "Counts all demand data writes (RFOs) TBD TBD",
+        "MSRValue": "0x10003C0002",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all demand data writes (RFOs) TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -879,12 +857,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3.",
-        "MSRValue": "0x3f803c0002 ",
+        "BriefDescription": "Counts all demand data writes (RFOs) TBD TBD",
+        "MSRValue": "0x3F803C0002",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all demand data writes (RFOs) TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -892,12 +870,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand code reads that have any response type.",
-        "MSRValue": "0x0000010004 ",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that have any response type.",
+        "MSRValue": "0x0000010004",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand code reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that have any response type.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -905,12 +883,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
-        "MSRValue": "0x01003c0004 ",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD",
+        "MSRValue": "0x01003C0004",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -918,12 +896,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x04003c0004 ",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD",
+        "MSRValue": "0x04003C0004",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -931,25 +909,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "DEMAND_CODE_RD & L3_HIT & SNOOP_HIT_WITH_FWD",
-        "MSRValue": "0x08003c0004 ",
-        "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "CounterHTOff": "0,1,2,3"
-    },
-    {
-        "Offcore": "1",
-        "EventCode": "0xB7, 0xBB",
-        "UMask": "0x1",
-        "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x10003c0004 ",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD",
+        "MSRValue": "0x10003C0004",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -957,12 +922,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand code reads that hit in the L3.",
-        "MSRValue": "0x3f803c0004 ",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD",
+        "MSRValue": "0x3F803C0004",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand code reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -970,12 +935,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that have any response type.",
-        "MSRValue": "0x0000010010 ",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads have any response type.",
+        "MSRValue": "0x0000010010",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts prefetch (that bring data to L2) data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads have any response type.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -983,12 +948,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
-        "MSRValue": "0x01003c0010 ",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD",
+        "MSRValue": "0x01003C0010",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -996,12 +961,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x04003c0010 ",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD",
+        "MSRValue": "0x04003C0010",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1009,25 +974,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "PF_L2_DATA_RD & L3_HIT & SNOOP_HIT_WITH_FWD",
-        "MSRValue": "0x08003c0010 ",
-        "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "CounterHTOff": "0,1,2,3"
-    },
-    {
-        "Offcore": "1",
-        "EventCode": "0xB7, 0xBB",
-        "UMask": "0x1",
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x10003c0010 ",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD",
+        "MSRValue": "0x10003C0010",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1035,12 +987,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3.",
-        "MSRValue": "0x3f803c0010 ",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD",
+        "MSRValue": "0x3F803C0010",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1048,12 +1000,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that have any response type.",
-        "MSRValue": "0x0000010020 ",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs have any response type.",
+        "MSRValue": "0x0000010020",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs have any response type.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1061,12 +1013,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
-        "MSRValue": "0x01003c0020 ",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD",
+        "MSRValue": "0x01003C0020",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1074,12 +1026,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x04003c0020 ",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD",
+        "MSRValue": "0x04003C0020",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1087,25 +1039,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "PF_L2_RFO & L3_HIT & SNOOP_HIT_WITH_FWD",
-        "MSRValue": "0x08003c0020 ",
-        "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "CounterHTOff": "0,1,2,3"
-    },
-    {
-        "Offcore": "1",
-        "EventCode": "0xB7, 0xBB",
-        "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x10003c0020 ",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD",
+        "MSRValue": "0x10003C0020",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1113,12 +1052,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3.",
-        "MSRValue": "0x3f803c0020 ",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD",
+        "MSRValue": "0x3F803C0020",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1126,12 +1065,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that have any response type.",
-        "MSRValue": "0x0000010080 ",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads have any response type.",
+        "MSRValue": "0x0000010080",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads have any response type.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1139,12 +1078,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
-        "MSRValue": "0x01003c0080 ",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD",
+        "MSRValue": "0x01003C0080",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1152,25 +1091,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x04003c0080 ",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD",
+        "MSRValue": "0x04003C0080",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "CounterHTOff": "0,1,2,3"
-    },
-    {
-        "Offcore": "1",
-        "EventCode": "0xB7, 0xBB",
-        "UMask": "0x1",
-        "BriefDescription": "PF_L3_DATA_RD & L3_HIT & SNOOP_HIT_WITH_FWD",
-        "MSRValue": "0x08003c0080 ",
-        "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1178,12 +1104,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x10003c0080 ",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD",
+        "MSRValue": "0x10003C0080",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1191,12 +1117,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3.",
-        "MSRValue": "0x3f803c0080 ",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD",
+        "MSRValue": "0x3F803C0080",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1204,12 +1130,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that have any response type.",
-        "MSRValue": "0x0000010100 ",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs have any response type.",
+        "MSRValue": "0x0000010100",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs have any response type.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1217,12 +1143,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
-        "MSRValue": "0x01003c0100 ",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD",
+        "MSRValue": "0x01003C0100",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1230,12 +1156,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x04003c0100 ",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD",
+        "MSRValue": "0x04003C0100",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1243,12 +1169,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "PF_L3_RFO & L3_HIT & SNOOP_HIT_WITH_FWD",
-        "MSRValue": "0x08003c0100 ",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD",
+        "MSRValue": "0x10003C0100",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1256,12 +1182,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x10003c0100 ",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD",
+        "MSRValue": "0x3F803C0100",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1269,12 +1195,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3.",
-        "MSRValue": "0x3f803c0100 ",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests have any response type.",
+        "MSRValue": "0x0000010400",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.ANY_RESPONSE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests have any response type.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1282,12 +1208,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that have any response type.",
-        "MSRValue": "0x0000010400 ",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD",
+        "MSRValue": "0x01003C0400",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1295,12 +1221,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
-        "MSRValue": "0x01003c0400 ",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD",
+        "MSRValue": "0x04003C0400",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1308,12 +1234,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x04003c0400 ",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD",
+        "MSRValue": "0x10003C0400",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1321,12 +1247,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "PF_L1D_AND_SW & L3_HIT & SNOOP_HIT_WITH_FWD",
-        "MSRValue": "0x08003c0400 ",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD",
+        "MSRValue": "0x3F803C0400",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1334,12 +1260,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x10003c0400 ",
+        "BriefDescription": "TBD have any response type.",
+        "MSRValue": "0x0000010490",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD have any response type.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1347,12 +1273,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3.",
-        "MSRValue": "0x3f803c0400 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x01003C0490",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1360,12 +1286,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts any other requests that have any response type.",
-        "MSRValue": "0x0000018000 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x04003C0490",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.OTHER.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts any other requests that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1373,12 +1299,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts any other requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
-        "MSRValue": "0x01003c8000 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x10003C0490",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts any other requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1386,12 +1312,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts any other requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x04003c8000 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x3F803C0490",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts any other requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1399,12 +1325,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "OTHER & L3_HIT & SNOOP_HIT_WITH_FWD",
-        "MSRValue": "0x08003c8000 ",
+        "BriefDescription": "TBD have any response type.",
+        "MSRValue": "0x0000010120",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD have any response type.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1412,12 +1338,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts any other requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x10003c8000 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x01003C0120",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts any other requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1425,12 +1351,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts any other requests that hit in the L3.",
-        "MSRValue": "0x3f803c8000 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x04003C0120",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts any other requests that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1438,12 +1364,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch data reads that have any response type.",
-        "MSRValue": "0x0000010490 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x10003C0120",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1451,12 +1377,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
-        "MSRValue": "0x01003c0490 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x3F803C0120",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1464,12 +1390,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x04003c0490 ",
+        "BriefDescription": "TBD have any response type.",
+        "MSRValue": "0x0000010491",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD have any response type.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1477,12 +1403,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "ALL_PF_DATA_RD & L3_HIT & SNOOP_HIT_WITH_FWD",
-        "MSRValue": "0x08003c0490 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x01003C0491",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1490,12 +1416,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x10003c0490 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x04003C0491",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1503,12 +1429,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch data reads that hit in the L3.",
-        "MSRValue": "0x3f803c0490 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x10003C0491",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1516,12 +1442,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts prefetch RFOs that have any response type.",
-        "MSRValue": "0x0000010120 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x3F803C0491",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts prefetch RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1529,12 +1455,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
-        "MSRValue": "0x01003c0120 ",
+        "BriefDescription": "TBD have any response type.",
+        "MSRValue": "0x0000010122",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD have any response type.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1542,12 +1468,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x04003c0120 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x01003C0122",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1555,12 +1481,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "ALL_PF_RFO & L3_HIT & SNOOP_HIT_WITH_FWD",
-        "MSRValue": "0x08003c0120 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x04003C0122",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1568,12 +1494,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x10003c0120 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x10003C0122",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HITM_OTHER_CORE",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1581,12 +1507,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts prefetch RFOs that hit in the L3.",
-        "MSRValue": "0x3f803c0120 ",
+        "BriefDescription": "TBD TBD TBD",
+        "MSRValue": "0x3F803C0122",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts prefetch RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6, 0x1a7",
+        "PublicDescription": "TBD TBD TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1594,12 +1520,11 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch data reads that have any response type.",
-        "MSRValue": "0x0000010491 ",
+        "BriefDescription": "Counts demand data reads",
+        "MSRValue": "0x08007C0001",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "PublicDescription": "Counts demand data reads",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1607,12 +1532,11 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
-        "MSRValue": "0x01003c0491 ",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "MSRValue": "0x08007C0002",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "PublicDescription": "Counts all demand data writes (RFOs)",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1620,12 +1544,11 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x04003c0491 ",
+        "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
+        "MSRValue": "0x08007C0004",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1633,12 +1556,11 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "ALL_DATA_RD & L3_HIT & SNOOP_HIT_WITH_FWD",
-        "MSRValue": "0x08003c0491 ",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "MSRValue": "0x08007C0010",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1646,12 +1568,11 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x10003c0491 ",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "MSRValue": "0x08007C0020",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1659,12 +1580,11 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3.",
-        "MSRValue": "0x3f803c0491 ",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "MSRValue": "0x08007C0080",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1672,12 +1592,11 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch RFOs that have any response type.",
-        "MSRValue": "0x0000010122 ",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "MSRValue": "0x08007C0100",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1685,12 +1604,11 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
-        "MSRValue": "0x01003c0122 ",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "MSRValue": "0x08007C0400",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1698,12 +1616,11 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x04003c0122 ",
+        "BriefDescription": "TBD",
+        "MSRValue": "0x08007C0490",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "PublicDescription": "TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1711,12 +1628,11 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "ALL_RFO & L3_HIT & SNOOP_HIT_WITH_FWD",
-        "MSRValue": "0x08003c0122 ",
+        "BriefDescription": "TBD",
+        "MSRValue": "0x08007C0120",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "PublicDescription": "TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1724,12 +1640,11 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
-        "MSRValue": "0x10003c0122 ",
+        "BriefDescription": "TBD",
+        "MSRValue": "0x08007C0491",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "PublicDescription": "TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1737,12 +1652,11 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3.",
-        "MSRValue": "0x3f803c0122 ",
+        "BriefDescription": "TBD",
+        "MSRValue": "0x08007C0122",
         "Counter": "0,1,2,3",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "PublicDescription": "TBD",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     }
tools/perf/pmu-events/arch/x86/skylakex/floating-point.json +0 -2
index 286ed1a37ec9..c5d0babe89fc 100644
@@ -59,7 +59,6 @@
         "BriefDescription": "Number of Packed Double-Precision FP arithmetic instructions (Use operation multiplier of 8)",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE",
-        "PublicDescription": "Number of Packed Double-Precision FP arithmetic instructions (Use operation multiplier of 8).",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -69,7 +68,6 @@
         "BriefDescription": "Number of Packed Single-Precision FP arithmetic instructions (Use operation multiplier of 16)",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE",
-        "PublicDescription": "Number of Packed Single-Precision FP arithmetic instructions (Use operation multiplier of 16).",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
tools/perf/pmu-events/arch/x86/skylakex/frontend.json +117 -117

483 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/skylakex/memory.json +337 -414

1,074 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/skylakex/pipeline.json +95 -78

173 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Part of the diff is not shown here. View the raw message.

author merge bot
#5 lore raw

[tip:perf/core] perf vendor events intel: Update Broadwell events to v23

In reply to a message not in the archive
perf vendor events intel: Update Broadwell events to v23
Commit-ID:  8313fe2d685da168b732421f85714cfd702d2141
Gitweb:     https://git.kernel.org/tip/8313fe2d685da168b732421f85714cfd702d2141
Author:     Andi Kleen <[email protected]>
AuthorDate: Thu, 14 Mar 2019 08:36:31 -0700
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 1 Apr 2019 15:23:09 -0300

perf vendor events intel: Update Broadwell events to v23

---
 .../perf/pmu-events/arch/x86/broadwell/cache.json  | 1630 +++++++++----------
 .../arch/x86/broadwell/floating-point.json         |   51 +-
 .../pmu-events/arch/x86/broadwell/frontend.json    |    4 +-
 .../perf/pmu-events/arch/x86/broadwell/memory.json | 1640 ++++++++++----------
 .../pmu-events/arch/x86/broadwell/pipeline.json    |   36 +-
 5 files changed, 1685 insertions(+), 1676 deletions(-)
tools/perf/pmu-events/arch/x86/broadwell/cache.json +815 -815
index 0b080b0352d8..7938bf5689ab 100644
@@ -56,10 +56,10 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "This event counts the number of demand Data Read requests that hit L2 cache. Only not rejected loads are counted.",
+        "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache.",
         "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x41",
+        "UMask": "0xc1",
         "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
         "SampleAfterValue": "200003",
         "BriefDescription": "Demand Data Read requests that hit L2 cache",
@@ -68,7 +68,7 @@
     {
         "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x42",
+        "UMask": "0xc2",
         "EventName": "L2_RQSTS.RFO_HIT",
         "SampleAfterValue": "200003",
         "BriefDescription": "RFO requests that hit L2 cache.",
@@ -77,7 +77,7 @@
     {
         "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x44",
+        "UMask": "0xc4",
         "EventName": "L2_RQSTS.CODE_RD_HIT",
         "SampleAfterValue": "200003",
         "BriefDescription": "L2 cache hits when fetching instructions, code reads.",
@@ -87,7 +87,7 @@
         "PublicDescription": "This event counts the number of requests from the L2 hardware prefetchers that hit L2 cache. L3 prefetch new types.",
         "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x50",
+        "UMask": "0xd0",
         "EventName": "L2_RQSTS.L2_PF_HIT",
         "SampleAfterValue": "200003",
         "BriefDescription": "L2 prefetch requests that hit L2 cache",
@@ -433,7 +433,7 @@
     },
     {
         "PEBS": "1",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
+        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-splitted load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
         "EventCode": "0xD0",
         "Counter": "0,1,2,3",
         "UMask": "0x41",
@@ -445,7 +445,7 @@
     },
     {
         "PEBS": "1",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
+        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-splitted store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
         "EventCode": "0xD0",
         "Counter": "0,1,2,3",
         "UMask": "0x42",
@@ -771,2628 +771,2628 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "Counts demand data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010001 ",
+        "MSRValue": "0x0000010001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts demand data reads that have any response type.",
+        "BriefDescription": "Counts demand data reads have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080020001 ",
+        "MSRValue": "0x0080020001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts demand data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100020001 ",
+        "MSRValue": "0x0100020001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts demand data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200020001 ",
+        "MSRValue": "0x0200020001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts demand data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400020001 ",
+        "MSRValue": "0x0400020001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts demand data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000020001 ",
+        "MSRValue": "0x1000020001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts demand data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f80020001 ",
+        "MSRValue": "0x3F80020001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts demand data reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c0001 ",
+        "MSRValue": "0x00803C0001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts demand data reads that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts demand data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c0001 ",
+        "MSRValue": "0x01003C0001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts demand data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts demand data reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c0001 ",
+        "MSRValue": "0x02003C0001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts demand data reads that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts demand data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c0001 ",
+        "MSRValue": "0x04003C0001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts demand data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10003c0001 ",
+        "MSRValue": "0x10003C0001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_DATA_RD & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts demand data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts demand data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f803c0001 ",
+        "MSRValue": "0x3F803C0001",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts demand data reads that hit in the L3.",
+        "BriefDescription": "Counts demand data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all demand data writes (RFOs) that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand data writes (RFOs) have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010002 ",
+        "MSRValue": "0x0000010002",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand data writes (RFOs) that have any response type.",
+        "BriefDescription": "Counts all demand data writes (RFOs) have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand data writes (RFOs)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c0002 ",
+        "MSRValue": "0x00803C0002",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand data writes (RFOs)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c0002 ",
+        "MSRValue": "0x01003C0002",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand data writes (RFOs)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c0002 ",
+        "MSRValue": "0x02003C0002",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand data writes (RFOs)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c0002 ",
+        "MSRValue": "0x04003C0002",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand data writes (RFOs)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10003c0002 ",
+        "MSRValue": "0x10003C0002",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_RFO & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand data writes (RFOs)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f803c0002 ",
+        "MSRValue": "0x3F803C0002",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3.",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all demand code reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010004 ",
+        "MSRValue": "0x0000010004",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand code reads that have any response type.",
+        "BriefDescription": "Counts all demand code reads have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080020004 ",
+        "MSRValue": "0x0080020004",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_CODE_RD & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts all demand code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100020004 ",
+        "MSRValue": "0x0100020004",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_CODE_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts all demand code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200020004 ",
+        "MSRValue": "0x0200020004",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_CODE_RD & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts all demand code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400020004 ",
+        "MSRValue": "0x0400020004",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_CODE_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts all demand code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000020004 ",
+        "MSRValue": "0x1000020004",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_CODE_RD & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts all demand code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f80020004 ",
+        "MSRValue": "0x3F80020004",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_CODE_RD & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts all demand code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all demand code reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c0004 ",
+        "MSRValue": "0x00803C0004",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand code reads that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts all demand code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all demand code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c0004 ",
+        "MSRValue": "0x01003C0004",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts all demand code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all demand code reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c0004 ",
+        "MSRValue": "0x02003C0004",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand code reads that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts all demand code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c0004 ",
+        "MSRValue": "0x04003C0004",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts all demand code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10003c0004 ",
+        "MSRValue": "0x10003C0004",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "DEMAND_CODE_RD & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts all demand code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all demand code reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f803c0004 ",
+        "MSRValue": "0x3F803C0004",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand code reads that hit in the L3.",
+        "BriefDescription": "Counts all demand code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts writebacks (modified to exclusive) that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts writebacks (modified to exclusive) have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010008 ",
+        "MSRValue": "0x0000010008",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.COREWB.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts writebacks (modified to exclusive) that have any response type.",
+        "BriefDescription": "Counts writebacks (modified to exclusive) have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts writebacks (modified to exclusive)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080020008 ",
+        "MSRValue": "0x0080020008",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.COREWB.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "COREWB & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts writebacks (modified to exclusive)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts writebacks (modified to exclusive)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100020008 ",
+        "MSRValue": "0x0100020008",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.COREWB.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "COREWB & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts writebacks (modified to exclusive)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts writebacks (modified to exclusive)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200020008 ",
+        "MSRValue": "0x0200020008",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.COREWB.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "COREWB & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts writebacks (modified to exclusive)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts writebacks (modified to exclusive)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400020008 ",
+        "MSRValue": "0x0400020008",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.COREWB.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "COREWB & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts writebacks (modified to exclusive)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts writebacks (modified to exclusive)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000020008 ",
+        "MSRValue": "0x1000020008",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.COREWB.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "COREWB & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts writebacks (modified to exclusive)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts writebacks (modified to exclusive)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f80020008 ",
+        "MSRValue": "0x3F80020008",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.COREWB.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "COREWB & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts writebacks (modified to exclusive)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts writebacks (modified to exclusive) that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts writebacks (modified to exclusive)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c0008 ",
+        "MSRValue": "0x00803C0008",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.COREWB.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts writebacks (modified to exclusive) that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts writebacks (modified to exclusive)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts writebacks (modified to exclusive) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts writebacks (modified to exclusive)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c0008 ",
+        "MSRValue": "0x01003C0008",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.COREWB.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts writebacks (modified to exclusive) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts writebacks (modified to exclusive)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts writebacks (modified to exclusive) that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts writebacks (modified to exclusive)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c0008 ",
+        "MSRValue": "0x02003C0008",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.COREWB.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts writebacks (modified to exclusive) that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts writebacks (modified to exclusive)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts writebacks (modified to exclusive) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts writebacks (modified to exclusive)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c0008 ",
+        "MSRValue": "0x04003C0008",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.COREWB.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts writebacks (modified to exclusive) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts writebacks (modified to exclusive)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts writebacks (modified to exclusive)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10003c0008 ",
+        "MSRValue": "0x10003C0008",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.COREWB.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "COREWB & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts writebacks (modified to exclusive)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts writebacks (modified to exclusive) that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts writebacks (modified to exclusive)",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f803c0008 ",
+        "MSRValue": "0x3F803C0008",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.COREWB.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts writebacks (modified to exclusive) that hit in the L3.",
+        "BriefDescription": "Counts writebacks (modified to exclusive)",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch (that bring data to L2) data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010010 ",
+        "MSRValue": "0x0000010010",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that have any response type.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080020010 ",
+        "MSRValue": "0x0080020010",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_DATA_RD & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100020010 ",
+        "MSRValue": "0x0100020010",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_DATA_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200020010 ",
+        "MSRValue": "0x0200020010",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_DATA_RD & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400020010 ",
+        "MSRValue": "0x0400020010",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_DATA_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000020010 ",
+        "MSRValue": "0x1000020010",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_DATA_RD & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f80020010 ",
+        "MSRValue": "0x3F80020010",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_DATA_RD & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c0010 ",
+        "MSRValue": "0x00803C0010",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c0010 ",
+        "MSRValue": "0x01003C0010",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c0010 ",
+        "MSRValue": "0x02003C0010",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c0010 ",
+        "MSRValue": "0x04003C0010",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10003c0010 ",
+        "MSRValue": "0x10003C0010",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_DATA_RD & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f803c0010 ",
+        "MSRValue": "0x3F803C0010",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010020 ",
+        "MSRValue": "0x0000010020",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that have any response type.",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080020020 ",
+        "MSRValue": "0x0080020020",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_RFO & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100020020 ",
+        "MSRValue": "0x0100020020",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_RFO & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200020020 ",
+        "MSRValue": "0x0200020020",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_RFO & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400020020 ",
+        "MSRValue": "0x0400020020",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_RFO & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000020020 ",
+        "MSRValue": "0x1000020020",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_RFO & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f80020020 ",
+        "MSRValue": "0x3F80020020",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_RFO & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c0020 ",
+        "MSRValue": "0x00803C0020",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c0020 ",
+        "MSRValue": "0x01003C0020",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c0020 ",
+        "MSRValue": "0x02003C0020",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c0020 ",
+        "MSRValue": "0x04003C0020",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10003c0020 ",
+        "MSRValue": "0x10003C0020",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_RFO & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f803c0020 ",
+        "MSRValue": "0x3F803C0020",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3.",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010040 ",
+        "MSRValue": "0x0000010040",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that have any response type.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080020040 ",
+        "MSRValue": "0x0080020040",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_CODE_RD & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100020040 ",
+        "MSRValue": "0x0100020040",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_CODE_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200020040 ",
+        "MSRValue": "0x0200020040",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_CODE_RD & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400020040 ",
+        "MSRValue": "0x0400020040",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_CODE_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000020040 ",
+        "MSRValue": "0x1000020040",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_CODE_RD & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f80020040 ",
+        "MSRValue": "0x3F80020040",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_CODE_RD & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c0040 ",
+        "MSRValue": "0x00803C0040",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c0040 ",
+        "MSRValue": "0x01003C0040",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c0040 ",
+        "MSRValue": "0x02003C0040",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c0040 ",
+        "MSRValue": "0x04003C0040",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10003c0040 ",
+        "MSRValue": "0x10003C0040",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L2_CODE_RD & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f803c0040 ",
+        "MSRValue": "0x3F803C0040",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010080 ",
+        "MSRValue": "0x0000010080",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that have any response type.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080020080 ",
+        "MSRValue": "0x0080020080",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_DATA_RD & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100020080 ",
+        "MSRValue": "0x0100020080",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_DATA_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200020080 ",
+        "MSRValue": "0x0200020080",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_DATA_RD & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400020080 ",
+        "MSRValue": "0x0400020080",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_DATA_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000020080 ",
+        "MSRValue": "0x1000020080",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_DATA_RD & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f80020080 ",
+        "MSRValue": "0x3F80020080",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_DATA_RD & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c0080 ",
+        "MSRValue": "0x00803C0080",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c0080 ",
+        "MSRValue": "0x01003C0080",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c0080 ",
+        "MSRValue": "0x02003C0080",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c0080 ",
+        "MSRValue": "0x04003C0080",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10003c0080 ",
+        "MSRValue": "0x10003C0080",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_DATA_RD & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f803c0080 ",
+        "MSRValue": "0x3F803C0080",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010100 ",
+        "MSRValue": "0x0000010100",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that have any response type.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080020100 ",
+        "MSRValue": "0x0080020100",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_RFO & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100020100 ",
+        "MSRValue": "0x0100020100",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_RFO & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200020100 ",
+        "MSRValue": "0x0200020100",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_RFO & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400020100 ",
+        "MSRValue": "0x0400020100",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_RFO & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000020100 ",
+        "MSRValue": "0x1000020100",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_RFO & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f80020100 ",
+        "MSRValue": "0x3F80020100",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_RFO & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c0100 ",
+        "MSRValue": "0x00803C0100",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c0100 ",
+        "MSRValue": "0x01003C0100",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c0100 ",
+        "MSRValue": "0x02003C0100",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c0100 ",
+        "MSRValue": "0x04003C0100",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10003c0100 ",
+        "MSRValue": "0x10003C0100",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_RFO & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f803c0100 ",
+        "MSRValue": "0x3F803C0100",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010200 ",
+        "MSRValue": "0x0000010200",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that have any response type.",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080020200 ",
+        "MSRValue": "0x0080020200",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_CODE_RD & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100020200 ",
+        "MSRValue": "0x0100020200",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_CODE_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200020200 ",
+        "MSRValue": "0x0200020200",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_CODE_RD & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400020200 ",
+        "MSRValue": "0x0400020200",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_CODE_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000020200 ",
+        "MSRValue": "0x1000020200",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_CODE_RD & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f80020200 ",
+        "MSRValue": "0x3F80020200",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_CODE_RD & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c0200 ",
+        "MSRValue": "0x00803C0200",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c0200 ",
+        "MSRValue": "0x01003C0200",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c0200 ",
+        "MSRValue": "0x02003C0200",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c0200 ",
+        "MSRValue": "0x04003C0200",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10003c0200 ",
+        "MSRValue": "0x10003C0200",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "PF_L3_CODE_RD & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f803c0200 ",
+        "MSRValue": "0x3F803C0200",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3.",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts any other requests that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000018000 ",
+        "MSRValue": "0x0000018000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.OTHER.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts any other requests that have any response type.",
+        "BriefDescription": "Counts any other requests have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080028000 ",
+        "MSRValue": "0x0080028000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "OTHER & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100028000 ",
+        "MSRValue": "0x0100028000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "OTHER & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200028000 ",
+        "MSRValue": "0x0200028000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "OTHER & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400028000 ",
+        "MSRValue": "0x0400028000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "OTHER & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000028000 ",
+        "MSRValue": "0x1000028000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "OTHER & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f80028000 ",
+        "MSRValue": "0x3F80028000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "OTHER & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts any other requests that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c8000 ",
+        "MSRValue": "0x00803C8000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts any other requests that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts any other requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c8000 ",
+        "MSRValue": "0x01003C8000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts any other requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts any other requests that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c8000 ",
+        "MSRValue": "0x02003C8000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts any other requests that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts any other requests that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c8000 ",
+        "MSRValue": "0x04003C8000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts any other requests that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10003c8000 ",
+        "MSRValue": "0x10003C8000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "OTHER & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts any other requests that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts any other requests",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f803c8000 ",
+        "MSRValue": "0x3F803C8000",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts any other requests that hit in the L3.",
+        "BriefDescription": "Counts any other requests",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch data reads have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010090 ",
+        "MSRValue": "0x0000010090",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch data reads that have any response type.",
+        "BriefDescription": "Counts all prefetch data reads have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080020090 ",
+        "MSRValue": "0x0080020090",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_DATA_RD & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100020090 ",
+        "MSRValue": "0x0100020090",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_DATA_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts all prefetch data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200020090 ",
+        "MSRValue": "0x0200020090",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_DATA_RD & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400020090 ",
+        "MSRValue": "0x0400020090",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_DATA_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts all prefetch data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000020090 ",
+        "MSRValue": "0x1000020090",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_DATA_RD & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts all prefetch data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f80020090 ",
+        "MSRValue": "0x3F80020090",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_DATA_RD & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch data reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c0090 ",
+        "MSRValue": "0x00803C0090",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch data reads that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts all prefetch data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c0090 ",
+        "MSRValue": "0x01003C0090",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts all prefetch data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch data reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c0090 ",
+        "MSRValue": "0x02003C0090",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch data reads that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts all prefetch data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c0090 ",
+        "MSRValue": "0x04003C0090",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts all prefetch data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10003c0090 ",
+        "MSRValue": "0x10003C0090",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_DATA_RD & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts all prefetch data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch data reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f803c0090 ",
+        "MSRValue": "0x3F803C0090",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch data reads that hit in the L3.",
+        "BriefDescription": "Counts all prefetch data reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch RFOs have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010120 ",
+        "MSRValue": "0x0000010120",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch RFOs that have any response type.",
+        "BriefDescription": "Counts prefetch RFOs have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080020120 ",
+        "MSRValue": "0x0080020120",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_RFO & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts prefetch RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100020120 ",
+        "MSRValue": "0x0100020120",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_RFO & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts prefetch RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200020120 ",
+        "MSRValue": "0x0200020120",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_RFO & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts prefetch RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400020120 ",
+        "MSRValue": "0x0400020120",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_RFO & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts prefetch RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000020120 ",
+        "MSRValue": "0x1000020120",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_RFO & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts prefetch RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f80020120 ",
+        "MSRValue": "0x3F80020120",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_RFO & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts prefetch RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch RFOs that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c0120 ",
+        "MSRValue": "0x00803C0120",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch RFOs that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts prefetch RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c0120 ",
+        "MSRValue": "0x01003C0120",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts prefetch RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch RFOs that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c0120 ",
+        "MSRValue": "0x02003C0120",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch RFOs that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts prefetch RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c0120 ",
+        "MSRValue": "0x04003C0120",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.",
+        "BriefDescription": "Counts prefetch RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x10003c0120 ",
+        "MSRValue": "0x10003C0120",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_RFO & L3_HIT & SNOOP_HITM",
+        "BriefDescription": "Counts prefetch RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts prefetch RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch RFOs",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f803c0120 ",
+        "MSRValue": "0x3F803C0120",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts prefetch RFOs that hit in the L3.",
+        "BriefDescription": "Counts prefetch RFOs",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch code reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch code reads have any response type.",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0000010240 ",
+        "MSRValue": "0x0000010240",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch code reads that have any response type.",
+        "BriefDescription": "Counts all prefetch code reads have any response type.",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0080020240 ",
+        "MSRValue": "0x0080020240",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.SUPPLIER_NONE.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_CODE_RD & SUPPLIER_NONE & SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0100020240 ",
+        "MSRValue": "0x0100020240",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_CODE_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts all prefetch code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0200020240 ",
+        "MSRValue": "0x0200020240",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.SUPPLIER_NONE.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_CODE_RD & SUPPLIER_NONE & SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x0400020240 ",
+        "MSRValue": "0x0400020240",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_CODE_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD",
+        "BriefDescription": "Counts all prefetch code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x1000020240 ",
+        "MSRValue": "0x1000020240",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.SUPPLIER_NONE.SNOOP_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_CODE_RD & SUPPLIER_NONE & SNOOP_HITM",
+        "BriefDescription": "Counts all prefetch code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x3f80020240 ",
+        "MSRValue": "0x3F80020240",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "ALL_PF_CODE_RD & SUPPLIER_NONE & ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch code reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x00803c0240 ",
+        "MSRValue": "0x00803C0240",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch code reads that hit in the L3 with no details on snoop-related information.",
+        "BriefDescription": "Counts all prefetch code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x01003c0240 ",
+        "MSRValue": "0x01003C0240",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts all prefetch code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch code reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x02003c0240 ",
+        "MSRValue": "0x02003C0240",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_HIT.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
+        "MSRIndex": "0x1a6, 0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all prefetch code reads that hit in the L3 with a snoop miss response.",
+        "BriefDescription": "Counts all prefetch code reads",
         "Offcore": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Counts all prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch code reads",
         "EventCode": "0xB7, 0xBB",
-        "MSRValue": "0x04003c0240 ",
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

tools/perf/pmu-events/arch/x86/broadwell/floating-point.json +29 -22

51 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/broadwell/frontend.json +2 -2
index 7142c76d7f11..aa4a5d762f21 100644

Lines of this file are not shown. View the raw message.

tools/perf/pmu-events/arch/x86/broadwell/memory.json +820 -820

1,640 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/broadwell/pipeline.json +0 -4
index 999cf3066363..bb25574b8d21 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

"EventName": "CPU_CLK_UNHALTED.REF_TSC",
@@ -317,7 +313,7 @@

         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "This event counts stalls occurred due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
+        "PublicDescription": "This event counts stalls occured due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
         "EventCode": "0x87",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
@@ -786,8 +782,8 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "This event counts resource-related stall cycles. Reasons for stalls can be as follows:\n - *any* u-arch structure got full (LB, SB, RS, ROB, BOB, LM, Physical Register Reclaim Table (PRRT), or Physical History Table (PHT) slots)\n - *any* u-arch structure got empty (like INT/SIMD FreeLists)\n - FPU control word (FPCW), MXCSR\nand others. This counts cycles that the pipeline backend blocked uop delivery from the front end.",
-        "EventCode": "0xA2",
+        "PublicDescription": "This event counts resource-related stall cycles.",
+        "EventCode": "0xa2",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "RESOURCE_STALLS.ANY",
@@ -973,6 +969,7 @@
         "CounterHTOff": "2"
     },
     {
+        "PublicDescription": "Number of Uops delivered by the LSD.",
         "EventCode": "0xA8",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
@@ -1147,7 +1144,8 @@
         "CounterHTOff": "1"
     },
     {
-        "PublicDescription": "This event counts FP operations retired. For X87 FP operations that have no exceptions counting also includes flows that have several X87, or flows that use X87 uops in the exception handling.",
+        "PEBS": "1",
+        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts FP operations retired. For X87 FP operations that have no exceptions counting also includes flows that have several X87, or flows that use X87 uops in the exception handling.",
         "EventCode": "0xC0",
         "Counter": "0,1,2,3",
         "UMask": "0x2",
@@ -1157,12 +1155,12 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
+        "PEBS": "1",
         "EventCode": "0xC1",
         "Counter": "0,1,2,3",
         "UMask": "0x40",
         "EventName": "OTHER_ASSISTS.ANY_WB_ASSIST",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Number of times any microcode assist is invoked by HW upon uop writeback.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
@@ -1178,26 +1176,28 @@
         "Data_LA": "1"
     },
     {
-        "PublicDescription": "This event counts cycles without actually retired uops.",
+        "PEBS": "1",
+        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts cycles without actually retired uops.",
         "EventCode": "0xC2",
         "Invert": "1",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "UOPS_RETIRED.STALL_CYCLES",
         "SampleAfterValue": "2000003",
-        "BriefDescription": "Cycles without actually retired uops.",
+        "BriefDescription": "Cycles no executable uops retired (Precise Event)",
         "CounterMask": "1",
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "Number of cycles using always true condition (uops_ret < 16) applied to non PEBS uops retired event.",
+        "PEBS": "1",
+        "PublicDescription": "Number of cycles using always true condition (uops_ret < 16) applied to  PEBS uops retired event.",
         "EventCode": "0xC2",
         "Invert": "1",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
         "EventName": "UOPS_RETIRED.TOTAL_CYCLES",
         "SampleAfterValue": "2000003",
-        "BriefDescription": "Cycles with less than 10 actually retired uops.",
+        "BriefDescription": "Number of cycles using always true condition applied to  PEBS uops retired event.",
         "CounterMask": "10",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1320,13 +1320,14 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "This event counts not taken branch instructions retired.",
+        "PEBS": "1",
+        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts not taken branch instructions retired.",
         "EventCode": "0xC4",
         "Counter": "0,1,2,3",
         "UMask": "0x10",
         "EventName": "BR_INST_RETIRED.NOT_TAKEN",
         "SampleAfterValue": "400009",
-        "BriefDescription": "Not taken branch instructions retired.",
+        "BriefDescription": "Counts all not taken macro branch instructions retired. (Precise Event)",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
@@ -1341,14 +1342,15 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "This event counts far branch instructions retired.",
+        "PEBS": "1",
+        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts far branch instructions retired.",
         "EventCode": "0xC4",
         "Counter": "0,1,2,3",
         "UMask": "0x40",
         "Errata": "BDW98",
         "EventName": "BR_INST_RETIRED.FAR_BRANCH",
         "SampleAfterValue": "100007",
-        "BriefDescription": "Far branch instructions retired.",
+        "BriefDescription": "Counts the number of far branch instructions retired.(Precise Event)",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {

Part of the diff is not shown here. View the raw message.

author merge bot
#6 lore raw

[tip:perf/core] perf vendor events intel: Update BroadwellX events to v14

In reply to a message not in the archive
perf vendor events intel: Update BroadwellX events to v14
Commit-ID:  9f0f4a242c24221ed006f449c3f67b863b12985c
Gitweb:     https://git.kernel.org/tip/9f0f4a242c24221ed006f449c3f67b863b12985c
Author:     Andi Kleen <[email protected]>
AuthorDate: Thu, 14 Mar 2019 08:39:28 -0700
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 1 Apr 2019 15:23:24 -0300

perf vendor events intel: Update BroadwellX events to v14

---
 .../perf/pmu-events/arch/x86/broadwellx/cache.json | 161 +++++++++++----------
 .../arch/x86/broadwellx/floating-point.json        |  16 +-
 .../pmu-events/arch/x86/broadwellx/memory.json     | 148 +++++++++----------
 .../pmu-events/arch/x86/broadwellx/pipeline.json   |  50 +++----
 4 files changed, 186 insertions(+), 189 deletions(-)
tools/perf/pmu-events/arch/x86/broadwellx/cache.json +81 -80
index 141b1080429d..75a3098d5775 100644
@@ -57,17 +57,17 @@
     },
     {
         "EventCode": "0x24",
-        "UMask": "0x41",
+        "UMask": "0xc1",
         "BriefDescription": "Demand Data Read requests that hit L2 cache",
         "Counter": "0,1,2,3",
         "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
-        "PublicDescription": "This event counts the number of demand Data Read requests that hit L2 cache. Only not rejected loads are counted.",
+        "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache.",
         "SampleAfterValue": "200003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
         "EventCode": "0x24",
-        "UMask": "0x42",
+        "UMask": "0xc2",
         "BriefDescription": "RFO requests that hit L2 cache.",
         "Counter": "0,1,2,3",
         "EventName": "L2_RQSTS.RFO_HIT",
@@ -76,7 +76,7 @@
     },
     {
         "EventCode": "0x24",
-        "UMask": "0x44",
+        "UMask": "0xc4",
         "BriefDescription": "L2 cache hits when fetching instructions, code reads.",
         "Counter": "0,1,2,3",
         "EventName": "L2_RQSTS.CODE_RD_HIT",
@@ -85,7 +85,7 @@
     },
     {
         "EventCode": "0x24",
-        "UMask": "0x50",
+        "UMask": "0xd0",
         "BriefDescription": "L2 prefetch requests that hit L2 cache",
         "Counter": "0,1,2,3",
         "EventName": "L2_RQSTS.L2_PF_HIT",
@@ -396,24 +396,24 @@
     {
         "EventCode": "0xD0",
         "UMask": "0x11",
-        "BriefDescription": "Retired load uops that miss the STLB. (Precise Event - PEBS)",
+        "BriefDescription": "Retired load uops that miss the STLB.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_UOPS_RETIRED.STLB_MISS_LOADS",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts load uops with true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.",
+        "PublicDescription": "This event counts load uops with true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD0",
         "UMask": "0x12",
-        "BriefDescription": "Retired store uops that miss the STLB. (Precise Event - PEBS)",
+        "BriefDescription": "Retired store uops that miss the STLB.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_UOPS_RETIRED.STLB_MISS_STORES",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts store uops true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.",
+        "PublicDescription": "This event counts store uops with true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.",
         "SampleAfterValue": "100003",
         "L1_Hit_Indication": "1",
         "CounterHTOff": "0,1,2,3"
@@ -421,37 +421,37 @@
     {
         "EventCode": "0xD0",
         "UMask": "0x21",
-        "BriefDescription": "Retired load uops with locked access. (Precise Event - PEBS)",
+        "BriefDescription": "Retired load uops with locked access.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS",
         "Errata": "BDM35",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts load uops with locked access retired to the architected path.",
+        "PublicDescription": "This event counts load uops with locked access retired to the architected path.",
         "SampleAfterValue": "100007",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD0",
         "UMask": "0x41",
-        "BriefDescription": "Retired load uops that split across a cacheline boundary.(Precise Event - PEBS)",
+        "BriefDescription": "Retired load uops that split across a cacheline boundary.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
+        "PublicDescription": "This event counts line-splitted load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD0",
         "UMask": "0x42",
-        "BriefDescription": "Retired store uops that split across a cacheline boundary. (Precise Event - PEBS)",
+        "BriefDescription": "Retired store uops that split across a cacheline boundary.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
+        "PublicDescription": "This event counts line-splitted store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
         "SampleAfterValue": "100003",
         "L1_Hit_Indication": "1",
         "CounterHTOff": "0,1,2,3"
@@ -459,24 +459,24 @@
     {
         "EventCode": "0xD0",
         "UMask": "0x81",
-        "BriefDescription": "All retired load uops. (Precise Event - PEBS)",
+        "BriefDescription": "All retired load uops.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_UOPS_RETIRED.ALL_LOADS",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts load uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event ?ounts AVX-256bit load/store double-pump memory uops as a single uop at retirement. This event also counts SW prefetches.",
+        "PublicDescription": "This event counts load uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event counts AVX-256bit load/store double-pump memory uops as a single uop at retirement. This event also counts SW prefetches.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD0",
         "UMask": "0x82",
-        "BriefDescription": "Retired store uops that split across a cacheline boundary. (Precise Event - PEBS)",
+        "BriefDescription": "All retired store uops.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_UOPS_RETIRED.ALL_STORES",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts store uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event ?ounts AVX-256bit load/store double-pump memory uops as a single uop at retirement.",
+        "PublicDescription": "This event counts store uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event counts AVX-256bit load/store double-pump memory uops as a single uop at retirement.",
         "SampleAfterValue": "2000003",
         "L1_Hit_Indication": "1",
         "CounterHTOff": "0,1,2,3"
@@ -484,69 +484,69 @@
     {
         "EventCode": "0xD1",
         "UMask": "0x1",
-        "BriefDescription": "Retired load uops with L1 cache hits as data sources. (Precise Event - PEBS)",
+        "BriefDescription": "Retired load uops with L1 cache hits as data sources.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data source were hits in the nearest-level (L1) cache.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit  even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load. This event also counts SW prefetches independent of the actual data source.",
+        "PublicDescription": "This event counts retired load uops which data sources were hits in the nearest-level (L1) cache.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit  even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load. This event also counts SW prefetches independent of the actual data source.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD1",
         "UMask": "0x2",
-        "BriefDescription": "Retired load uops with L2 cache hits as data sources. (Precise Event - PEBS)",
+        "BriefDescription": "Retired load uops with L2 cache hits as data sources.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT",
         "Errata": "BDM35",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were hits in the mid-level (L2) cache.",
+        "PublicDescription": "This event counts retired load uops which data sources were hits in the mid-level (L2) cache.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD1",
         "UMask": "0x4",
-        "BriefDescription": "Hit in last-level (L3) cache. Excludes Unknown data-source. (Precise Event - PEBS)",
+        "BriefDescription": "Retired load uops which data sources were data hits in L3 without snoops required.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_RETIRED.L3_HIT",
         "Errata": "BDM100",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were data hits in the last-level (L3) cache without snoops required.",
+        "PublicDescription": "This event counts retired load uops which data sources were data hits in the last-level (L3) cache without snoops required.",
         "SampleAfterValue": "50021",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD1",
         "UMask": "0x8",
-        "BriefDescription": "Retired load uops misses in L1 cache as data sources. Uses PEBS.",
+        "BriefDescription": "Retired load uops misses in L1 cache as data sources.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were misses in the nearest-level (L1) cache. Counting excludes unknown and UC data source.",
+        "PublicDescription": "This event counts retired load uops which data sources were misses in the nearest-level (L1) cache. Counting excludes unknown and UC data source.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD1",
         "UMask": "0x10",
-        "BriefDescription": "Retired load uops with L2 cache misses as data sources. Uses PEBS.",
+        "BriefDescription": "Miss in mid-level (L2) cache. Excludes Unknown data-source.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were misses in the mid-level (L2) cache. Counting excludes unknown and UC data source.",
+        "PublicDescription": "This event counts retired load uops which data sources were misses in the mid-level (L2) cache. Counting excludes unknown and UC data source.",
         "SampleAfterValue": "50021",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD1",
         "UMask": "0x20",
-        "BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source. (Precise Event - PEBS).",
+        "BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
@@ -558,83 +558,84 @@
     {
         "EventCode": "0xD1",
         "UMask": "0x40",
-        "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready. (Precise Event - PEBS)",
+        "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_RETIRED.HIT_LFB",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were load uops missed L1 but hit a fill buffer due to a preceding miss to the same cache line with the data not ready.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit  even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load.",
+        "PublicDescription": "This event counts retired load uops which data sources were load uops missed L1 but hit a fill buffer due to a preceding miss to the same cache line with the data not ready.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit  even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD2",
         "UMask": "0x1",
-        "BriefDescription": "Retired load uops which data sources were L3 hit and cross-core snoop missed in on-pkg core cache. (Precise Event - PEBS)",
+        "BriefDescription": "Retired load uops which data sources were L3 hit and cross-core snoop missed in on-pkg core cache.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_MISS",
         "Errata": "BDM100",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were L3 Hit and a cross-core snoop missed in the on-pkg core cache.",
+        "PublicDescription": "This event counts retired load uops which data sources were L3 Hit and a cross-core snoop missed in the on-pkg core cache.",
         "SampleAfterValue": "20011",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD2",
         "UMask": "0x2",
-        "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache. (Precise Event - PEBS)",
+        "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HIT",
         "Errata": "BDM100",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were L3 hit and a cross-core snoop hit in the on-pkg core cache.",
+        "PublicDescription": "This event counts retired load uops which data sources were L3 hit and a cross-core snoop hit in the on-pkg core cache.",
         "SampleAfterValue": "20011",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD2",
         "UMask": "0x4",
-        "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3. (Precise Event - PEBS)",
+        "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HITM",
         "Errata": "BDM100",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were HitM responses from a core on same socket (shared L3).",
+        "PublicDescription": "This event counts retired load uops which data sources were HitM responses from a core on same socket (shared L3).",
         "SampleAfterValue": "20011",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD2",
         "UMask": "0x8",
-        "BriefDescription": "Retired load uops which data sources were hits in L3 without snoops required. (Precise Event - PEBS)",
+        "BriefDescription": "Retired load uops which data sources were hits in L3 without snoops required.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_NONE",
         "Errata": "BDM100",
-        "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were hits in the last-level (L3) cache without snoops required.",
+        "PublicDescription": "This event counts retired load uops which data sources were hits in the last-level (L3) cache without snoops required.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD3",
         "UMask": "0x1",
+        "BriefDescription": "Data from local DRAM either Snoop not needed or Snoop Miss (RspI)",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_L3_MISS_RETIRED.LOCAL_DRAM",
         "Errata": "BDE70, BDM100",
-        "PublicDescription": "This event counts retired load uops where the data came from local DRAM. This does not include hardware prefetches. This is a precise event.",
+        "PublicDescription": "Retired load uop whose Data Source was: local DRAM either Snoop not needed or Snoop Miss (RspI).",
         "SampleAfterValue": "100007",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD3",
         "UMask": "0x4",
-        "BriefDescription": "Retired load uop whose Data Source was: remote DRAM either Snoop not needed or Snoop Miss (RspI) (Precise Event)",
+        "BriefDescription": "Retired load uop whose Data Source was: remote DRAM either Snoop not needed or Snoop Miss (RspI)",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
@@ -646,7 +647,7 @@
     {
         "EventCode": "0xD3",
         "UMask": "0x10",
-        "BriefDescription": "Retired load uop whose Data Source was: Remote cache HITM (Precise Event)",
+        "BriefDescription": "Retired load uop whose Data Source was: Remote cache HITM",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
@@ -658,7 +659,7 @@
     {
         "EventCode": "0xD3",
         "UMask": "0x20",
-        "BriefDescription": "Retired load uop whose Data Source was: forwarded from remote cache (Precise Event)",
+        "BriefDescription": "Retired load uop whose Data Source was: forwarded from remote cache",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
@@ -810,12 +811,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all requests that hit in the L3",
-        "MSRValue": "0x3f803c8fff",
+        "BriefDescription": "Counts all requests hit in the L3",
+        "MSRValue": "0x3F803C8FFF",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_REQUESTS.LLC_HIT.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all requests that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all requests hit in the L3",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -823,12 +824,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
-        "MSRValue": "0x10003c07f7",
+        "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+        "MSRValue": "0x10003C07F7",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -836,12 +837,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
-        "MSRValue": "0x04003c07f7",
+        "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+        "MSRValue": "0x04003C07F7",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -849,12 +850,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
-        "MSRValue": "0x04003c0244",
+        "BriefDescription": "Counts all demand & prefetch code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+        "MSRValue": "0x04003C0244",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand & prefetch code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -862,12 +863,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
-        "MSRValue": "0x10003c0122",
+        "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+        "MSRValue": "0x10003C0122",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -875,12 +876,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
-        "MSRValue": "0x04003c0122",
+        "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+        "MSRValue": "0x04003C0122",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -888,12 +889,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
-        "MSRValue": "0x10003c0091",
+        "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+        "MSRValue": "0x10003C0091",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -901,12 +902,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
-        "MSRValue": "0x04003c0091",
+        "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+        "MSRValue": "0x04003C0091",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -914,12 +915,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3",
-        "MSRValue": "0x3f803c0200",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads hit in the L3",
+        "MSRValue": "0x3F803C0200",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_HIT.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads hit in the L3",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -927,12 +928,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3",
-        "MSRValue": "0x3f803c0100",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs hit in the L3",
+        "MSRValue": "0x3F803C0100",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_HIT.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs hit in the L3",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -940,12 +941,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
-        "MSRValue": "0x10003c0002",
+        "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+        "MSRValue": "0x10003C0002",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -953,12 +954,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3",
-        "MSRValue": "0x3f803c0002",
+        "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3",
+        "MSRValue": "0x3F803C0002",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand data writes (RFOs) hit in the L3",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     }
tools/perf/pmu-events/arch/x86/broadwellx/floating-point.json +8 -8
index d7b9d9c9c518..ba0e0c4e74eb 100644
@@ -42,7 +42,7 @@
     {
         "EventCode": "0xC7",
         "UMask": "0x3",
-        "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired. Applies to SSE* and AVX* scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired. Applies to SSE* and AVX* scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. (RSQRT for single precision?)",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.SCALAR",
         "SampleAfterValue": "2000003",
@@ -51,7 +51,7 @@
     {
         "EventCode": "0xC7",
         "UMask": "0x4",
-        "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired.  Each count represents 2 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired.  Each count represents 2 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE",
         "SampleAfterValue": "2000003",
@@ -60,7 +60,7 @@
     {
         "EventCode": "0xC7",
         "UMask": "0x8",
-        "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired.  Each count represents 4 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired.  Each count represents 4 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE",
         "SampleAfterValue": "2000003",
@@ -69,7 +69,7 @@
     {
         "EventCode": "0xC7",
         "UMask": "0x10",
-        "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired.  Each count represents 4 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired.  Each count represents 4 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE",
         "SampleAfterValue": "2000003",
@@ -78,7 +78,7 @@
     {
         "EventCode": "0xC7",
         "UMask": "0x15",
-        "BriefDescription": "Number of SSE/AVX computational double precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.  ?.",
+        "BriefDescription": "Number of SSE/AVX computational double precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.DOUBLE",
         "SampleAfterValue": "2000006",
@@ -87,7 +87,7 @@
     {
         "EventCode": "0xc7",
         "UMask": "0x20",
-        "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired.  Each count represents 8 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired.  Each count represents 8 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE",
         "SampleAfterValue": "2000003",
@@ -96,7 +96,7 @@
     {
         "EventCode": "0xC7",
         "UMask": "0x2a",
-        "BriefDescription": "Number of SSE/AVX computational single precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. ?.",
+        "BriefDescription": "Number of SSE/AVX computational single precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.SINGLE",
         "SampleAfterValue": "2000005",
@@ -105,7 +105,7 @@
     {
         "EventCode": "0xC7",
         "UMask": "0x3c",
-        "BriefDescription": "Number of SSE/AVX computational packed floating-point instructions retired. Applies to SSE* and AVX*, packed, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational packed floating-point instructions retired. Applies to SSE* and AVX*, packed, double and single precision floating-point: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. (RSQRT for single-precision?)",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.PACKED",
         "SampleAfterValue": "2000004",
tools/perf/pmu-events/arch/x86/broadwellx/memory.json +74 -74

436 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/broadwellx/pipeline.json +23 -27

180 lines not on this page · raw message

author merge bot
#7 lore raw

[tip:perf/core] perf vendor events intel: Update HaswellX events to v20

In reply to a message not in the archive
perf vendor events intel: Update HaswellX events to v20
Commit-ID:  e313477f7e76f23c3e2d45428f9456ba675bc702
Gitweb:     https://git.kernel.org/tip/e313477f7e76f23c3e2d45428f9456ba675bc702
Author:     Andi Kleen <[email protected]>
AuthorDate: Thu, 14 Mar 2019 08:39:49 -0700
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 1 Apr 2019 15:23:26 -0300

perf vendor events intel: Update HaswellX events to v20

---
 tools/perf/pmu-events/arch/x86/haswellx/cache.json | 173 ++++++++++-----------
 .../perf/pmu-events/arch/x86/haswellx/memory.json  | 172 ++++++++++----------
 .../pmu-events/arch/x86/haswellx/pipeline.json     |  10 +-
 3 files changed, 177 insertions(+), 178 deletions(-)
tools/perf/pmu-events/arch/x86/haswellx/cache.json +85 -88
index b2fbd617306a..a9e62d4357af 100644
@@ -64,18 +64,18 @@
     },
     {
         "EventCode": "0x24",
-        "UMask": "0x41",
+        "UMask": "0xc1",
         "BriefDescription": "Demand Data Read requests that hit L2 cache",
         "Counter": "0,1,2,3",
         "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
         "Errata": "HSD78",
-        "PublicDescription": "Demand data read requests that hit L2 cache.",
+        "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache",
         "SampleAfterValue": "200003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
         "EventCode": "0x24",
-        "UMask": "0x42",
+        "UMask": "0xc2",
         "BriefDescription": "RFO requests that hit L2 cache",
         "Counter": "0,1,2,3",
         "EventName": "L2_RQSTS.RFO_HIT",
@@ -85,7 +85,7 @@
     },
     {
         "EventCode": "0x24",
-        "UMask": "0x44",
+        "UMask": "0xc4",
         "BriefDescription": "L2 cache hits when fetching instructions, code reads.",
         "Counter": "0,1,2,3",
         "EventName": "L2_RQSTS.CODE_RD_HIT",
@@ -95,7 +95,7 @@
     },
     {
         "EventCode": "0x24",
-        "UMask": "0x50",
+        "UMask": "0xd0",
         "BriefDescription": "L2 prefetch requests that hit L2 cache",
         "Counter": "0,1,2,3",
         "EventName": "L2_RQSTS.L2_PF_HIT",
@@ -416,7 +416,7 @@
     {
         "EventCode": "0xD0",
         "UMask": "0x11",
-        "BriefDescription": "Retired load uops that miss the STLB. (precise Event)",
+        "BriefDescription": "Retired load uops that miss the STLB.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
@@ -428,7 +428,7 @@
     {
         "EventCode": "0xD0",
         "UMask": "0x12",
-        "BriefDescription": "Retired store uops that miss the STLB. (precise Event)",
+        "BriefDescription": "Retired store uops that miss the STLB.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
@@ -441,7 +441,7 @@
     {
         "EventCode": "0xD0",
         "UMask": "0x21",
-        "BriefDescription": "Retired load uops with locked access. (precise Event)",
+        "BriefDescription": "Retired load uops with locked access.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
@@ -453,34 +453,32 @@
     {
         "EventCode": "0xD0",
         "UMask": "0x41",
-        "BriefDescription": "Retired load uops that split across a cacheline boundary. (precise Event)",
+        "BriefDescription": "Retired load uops that split across a cacheline boundary.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS",
         "Errata": "HSD29, HSM30",
-        "PublicDescription": "This event counts load uops retired which had memory addresses spilt across 2 cache lines. A line split is across 64B cache-lines which may include a page split (4K). This is a precise event.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD0",
         "UMask": "0x42",
-        "BriefDescription": "Retired store uops that split across a cacheline boundary. (precise Event)",
+        "BriefDescription": "Retired store uops that split across a cacheline boundary.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES",
         "Errata": "HSD29, HSM30",
         "L1_Hit_Indication": "1",
-        "PublicDescription": "This event counts store uops retired which had memory addresses spilt across 2 cache lines. A line split is across 64B cache-lines which may include a page split (4K). This is a precise event.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD0",
         "UMask": "0x81",
-        "BriefDescription": "All retired load uops. (precise Event)",
+        "BriefDescription": "All retired load uops.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
@@ -492,14 +490,13 @@
     {
         "EventCode": "0xD0",
         "UMask": "0x82",
-        "BriefDescription": "All retired store uops. (precise Event)",
+        "BriefDescription": "All retired store uops.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_UOPS_RETIRED.ALL_STORES",
         "Errata": "HSD29, HSM30",
         "L1_Hit_Indication": "1",
-        "PublicDescription": "This event counts all store uops retired. This is a precise event.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -530,13 +527,13 @@
     {
         "EventCode": "0xD1",
         "UMask": "0x4",
-        "BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source.",
+        "BriefDescription": "Retired load uops which data sources were data hits in L3 without snoops required.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_RETIRED.L3_HIT",
         "Errata": "HSD74, HSD29, HSD25, HSM26, HSM30",
-        "PublicDescription": "This event counts retired load uops in which data sources were data hits in the L3 cache without snoops required. This does not include hardware prefetches. This is a precise event.",
+        "PublicDescription": "Retired load uops with L3 cache hits as data sources.",
         "SampleAfterValue": "50021",
         "CounterHTOff": "0,1,2,3"
     },
@@ -549,19 +546,20 @@
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS",
         "Errata": "HSM30",
-        "PublicDescription": "This event counts retired load uops in which data sources missed in the L1 cache. This does not include hardware prefetches. This is a precise event.",
+        "PublicDescription": "Retired load uops missed L1 cache as data sources.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD1",
         "UMask": "0x10",
-        "BriefDescription": "Retired load uops with L2 cache misses as data sources.",
+        "BriefDescription": "Miss in mid-level (L2) cache. Excludes Unknown data-source.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS",
         "Errata": "HSD29, HSM30",
+        "PublicDescription": "Retired load uops missed L2. Unknown data source excluded.",
         "SampleAfterValue": "50021",
         "CounterHTOff": "0,1,2,3"
     },
@@ -574,6 +572,7 @@
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_RETIRED.L3_MISS",
         "Errata": "HSD74, HSD29, HSD25, HSM26, HSM30",
+        "PublicDescription": "Retired load uops missed L3. Excludes unknown data source .",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -604,26 +603,24 @@
     {
         "EventCode": "0xD2",
         "UMask": "0x2",
-        "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache. ",
+        "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HIT",
         "Errata": "HSD29, HSD25, HSM26, HSM30",
-        "PublicDescription": "This event counts retired load uops that hit in the L3 cache, but required a cross-core snoop which resulted in a HIT in an on-pkg core cache. This does not include hardware prefetches. This is a precise event.",
         "SampleAfterValue": "20011",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD2",
         "UMask": "0x4",
-        "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3. ",
+        "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3.",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HITM",
         "Errata": "HSD29, HSD25, HSM26, HSM30",
-        "PublicDescription": "This event counts retired load uops that hit in the L3 cache, but required a cross-core snoop which resulted in a HITM (hit modified) in an on-pkg core cache. This does not include hardware prefetches. This is a precise event.",
         "SampleAfterValue": "20011",
         "CounterHTOff": "0,1,2,3"
     },
@@ -642,19 +639,20 @@
     {
         "EventCode": "0xD3",
         "UMask": "0x1",
+        "BriefDescription": "Data from local DRAM either Snoop not needed or Snoop Miss (RspI)",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "MEM_LOAD_UOPS_L3_MISS_RETIRED.LOCAL_DRAM",
         "Errata": "HSD74, HSD29, HSD25, HSM30",
-        "PublicDescription": "This event counts retired load uops where the data came from local DRAM. This does not include hardware prefetches. This is a precise event.",
+        "PublicDescription": "This event counts retired load uops where the data came from local DRAM. This does not include hardware prefetches.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xD3",
         "UMask": "0x4",
-        "BriefDescription": "Retired load uop whose Data Source was: remote DRAM either Snoop not needed or Snoop Miss (RspI) (Precise Event)",
+        "BriefDescription": "Retired load uop whose Data Source was: remote DRAM either Snoop not needed or Snoop Miss (RspI)",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
@@ -666,7 +664,7 @@
     {
         "EventCode": "0xD3",
         "UMask": "0x10",
-        "BriefDescription": "Retired load uop whose Data Source was: Remote cache HITM (Precise Event)",
+        "BriefDescription": "Retired load uop whose Data Source was: Remote cache HITM",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
@@ -678,7 +676,7 @@
     {
         "EventCode": "0xD3",
         "UMask": "0x20",
-        "BriefDescription": "Retired load uop whose Data Source was: forwarded from remote cache (Precise Event)",
+        "BriefDescription": "Retired load uop whose Data Source was: forwarded from remote cache",
         "Data_LA": "1",
         "PEBS": "1",
         "Counter": "0,1,2,3",
@@ -833,7 +831,6 @@
         "BriefDescription": "Split locks in SQ",
         "Counter": "0,1,2,3",
         "EventName": "SQ_MISC.SPLIT_LOCK",
-        "PublicDescription": "",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -841,12 +838,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
-        "MSRValue": "0x04003c0001",
+        "BriefDescription": "Counts demand data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+        "MSRValue": "0x04003C0001",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -854,12 +851,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
-        "MSRValue": "0x10003c0001",
+        "BriefDescription": "Counts demand data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+        "MSRValue": "0x10003C0001",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts demand data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -867,12 +864,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
-        "MSRValue": "0x04003c0002",
+        "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+        "MSRValue": "0x04003C0002",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -880,12 +877,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
-        "MSRValue": "0x10003c0002",
+        "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+        "MSRValue": "0x10003C0002",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -893,12 +890,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
-        "MSRValue": "0x04003c0004",
+        "BriefDescription": "Counts all demand code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+        "MSRValue": "0x04003C0004",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -906,12 +903,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
-        "MSRValue": "0x10003c0004",
+        "BriefDescription": "Counts all demand code reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+        "MSRValue": "0x10003C0004",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand code reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -919,12 +916,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3",
-        "MSRValue": "0x3f803c0010",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads hit in the L3",
+        "MSRValue": "0x3F803C0010",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_HIT.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to L2) data reads hit in the L3",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -932,12 +929,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3",
-        "MSRValue": "0x3f803c0020",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs hit in the L3",
+        "MSRValue": "0x3F803C0020",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.LLC_HIT.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs hit in the L3",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -945,12 +942,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3",
-        "MSRValue": "0x3f803c0040",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads hit in the L3",
+        "MSRValue": "0x3F803C0040",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.LLC_HIT.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads hit in the L3",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -958,12 +955,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3",
-        "MSRValue": "0x3f803c0080",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads hit in the L3",
+        "MSRValue": "0x3F803C0080",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_HIT.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads hit in the L3",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -971,12 +968,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3",
-        "MSRValue": "0x3f803c0100",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs hit in the L3",
+        "MSRValue": "0x3F803C0100",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_HIT.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs hit in the L3",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -984,12 +981,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3",
-        "MSRValue": "0x3f803c0200",
+        "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads hit in the L3",
+        "MSRValue": "0x3F803C0200",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_HIT.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads hit in the L3",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -997,12 +994,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
-        "MSRValue": "0x04003c0091",
+        "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+        "MSRValue": "0x04003C0091",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1010,12 +1007,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
-        "MSRValue": "0x10003c0091",
+        "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+        "MSRValue": "0x10003C0091",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1023,12 +1020,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
-        "MSRValue": "0x04003c0122",
+        "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+        "MSRValue": "0x04003C0122",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1036,12 +1033,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
-        "MSRValue": "0x10003c0122",
+        "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+        "MSRValue": "0x10003C0122",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1049,12 +1046,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all demand & prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
-        "MSRValue": "0x04003c0244",
+        "BriefDescription": "Counts all demand & prefetch code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+        "MSRValue": "0x04003C0244",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all demand & prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all demand & prefetch code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1062,12 +1059,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
-        "MSRValue": "0x04003c07f7",
+        "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+        "MSRValue": "0x04003C07F7",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1075,12 +1072,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
-        "MSRValue": "0x10003c07f7",
+        "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+        "MSRValue": "0x10003C07F7",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -1088,12 +1085,12 @@
         "Offcore": "1",
         "EventCode": "0xB7, 0xBB",
         "UMask": "0x1",
-        "BriefDescription": "Counts all requests that hit in the L3",
-        "MSRValue": "0x3f803c8fff",
+        "BriefDescription": "Counts all requests hit in the L3",
+        "MSRValue": "0x3F803C8FFF",
         "Counter": "0,1,2,3",
         "EventName": "OFFCORE_RESPONSE.ALL_REQUESTS.LLC_HIT.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "PublicDescription": "Counts all requests that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "PublicDescription": "Counts all requests hit in the L3",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
     }
tools/perf/pmu-events/arch/x86/haswellx/memory.json +86 -86

478 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/haswellx/pipeline.json +6 -4
index 8a18bfe9e3e4..26f2888341ee 100644
@@ -1,6 +1,5 @@
 [
     {
-        "EventCode": "0x00",
         "UMask": "0x1",
         "BriefDescription": "Instructions retired from execution.",
         "Counter": "Fixed counter 0",
@@ -11,7 +10,6 @@
         "CounterHTOff": "Fixed counter 0"
     },
     {
-        "EventCode": "0x00",
         "UMask": "0x2",
         "BriefDescription": "Core cycles when the thread is not in halt state.",
         "Counter": "Fixed counter 1",
@@ -21,7 +19,6 @@
         "CounterHTOff": "Fixed counter 1"
     },
     {
-        "EventCode": "0x00",
         "UMask": "0x2",
         "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
         "Counter": "Fixed counter 1",
@@ -31,7 +28,6 @@
         "CounterHTOff": "Fixed counter 1"
     },
     {
-        "EventCode": "0x00",
         "UMask": "0x3",
         "BriefDescription": "Reference cycles when the core is not in halt state.",
         "Counter": "Fixed counter 2",
@@ -1098,6 +1094,7 @@
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "UOPS_RETIRED.ALL",
+        "PublicDescription": "Counts the number of micro-ops retired. Use Cmask=1 and invert to count active cycles or stalled cycles.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -1142,6 +1139,7 @@
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "UOPS_RETIRED.RETIRE_SLOTS",
+        "PublicDescription": "This event counts the number of retirement slots used each cycle.  There are potentially 4 slots that can be used each cycle - meaning, 4 uops or 4 instructions could retire each cycle.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -1201,6 +1199,7 @@
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "BR_INST_RETIRED.CONDITIONAL",
+        "PublicDescription": "Counts the number of conditional branch instructions retired.",
         "SampleAfterValue": "400009",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -1241,6 +1240,7 @@
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "BR_INST_RETIRED.NEAR_RETURN",
+        "PublicDescription": "Counts the number of near return instructions retired.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -1261,6 +1261,7 @@
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "BR_INST_RETIRED.NEAR_TAKEN",
+        "PublicDescription": "Number of near taken branches retired.",
         "SampleAfterValue": "400009",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -1312,6 +1313,7 @@
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "BR_MISP_RETIRED.NEAR_TAKEN",
+        "PublicDescription": "Number of near branch instructions retired that were taken but mispredicted.",
         "SampleAfterValue": "400009",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
author merge bot
#8 lore raw

[tip:perf/core] perf vendor events intel: Update IvyTown events to v20

In reply to a message not in the archive
perf vendor events intel: Update IvyTown events to v20
Commit-ID:  009edd9ae0e77e5cbc6d8767e02be15b4e8b55c5
Gitweb:     https://git.kernel.org/tip/009edd9ae0e77e5cbc6d8767e02be15b4e8b55c5
Author:     Andi Kleen <[email protected]>
AuthorDate: Thu, 14 Mar 2019 08:40:32 -0700
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 1 Apr 2019 15:23:29 -0300

perf vendor events intel: Update IvyTown events to v20

---
 tools/perf/pmu-events/arch/x86/ivytown/pipeline.json | 4 ----
 1 file changed, 4 deletions(-)
tools/perf/pmu-events/arch/x86/ivytown/pipeline.json +0 -4
index 0afbfd95ea30..2a0aad91d83d 100644
@@ -1,6 +1,5 @@
 [
     {
-        "EventCode": "0x00",
         "Counter": "Fixed counter 0",
         "UMask": "0x1",
         "EventName": "INST_RETIRED.ANY",
@@ -9,7 +8,6 @@
         "CounterHTOff": "Fixed counter 0"
     },
     {
-        "EventCode": "0x00",
         "Counter": "Fixed counter 1",
         "UMask": "0x2",
         "EventName": "CPU_CLK_UNHALTED.THREAD",
@@ -19,7 +17,6 @@
     },
     {
         "PublicDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
-        "EventCode": "0x00",
         "Counter": "Fixed counter 1",
         "UMask": "0x2",
         "AnyThread": "1",
@@ -29,7 +26,6 @@
         "CounterHTOff": "Fixed counter 1"
     },
     {
-        "EventCode": "0x00",
         "Counter": "Fixed counter 2",
         "UMask": "0x3",
         "EventName": "CPU_CLK_UNHALTED.REF_TSC",
author merge bot
#9 lore raw

[tip:perf/core] perf vendor events intel: Update JakeTown events to v20

In reply to a message not in the archive
perf vendor events intel: Update JakeTown events to v20
Commit-ID:  e6b32be4455f57884bf2a312692c1f4135e35e02
Gitweb:     https://git.kernel.org/tip/e6b32be4455f57884bf2a312692c1f4135e35e02
Author:     Andi Kleen <[email protected]>
AuthorDate: Thu, 14 Mar 2019 08:40:51 -0700
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 1 Apr 2019 15:23:31 -0300

perf vendor events intel: Update JakeTown events to v20

---
 tools/perf/pmu-events/arch/x86/jaketown/cache.json    |  6 +++---
 tools/perf/pmu-events/arch/x86/jaketown/pipeline.json | 12 ++++--------
 2 files changed, 7 insertions(+), 11 deletions(-)
tools/perf/pmu-events/arch/x86/jaketown/cache.json +3 -3
index ee22e4a5e30d..52dc6ef40e63 100644
@@ -31,7 +31,7 @@
     },
     {
         "PEBS": "1",
-        "PublicDescription": "This event counts line-split load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
+        "PublicDescription": "This event counts line-splitted load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
         "EventCode": "0xD0",
         "Counter": "0,1,2,3",
         "UMask": "0x41",
@@ -42,7 +42,7 @@
     },
     {
         "PEBS": "1",
-        "PublicDescription": "This event counts line-split store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
+        "PublicDescription": "This event counts line-splitted store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
         "EventCode": "0xD0",
         "Counter": "0,1,2,3",
         "UMask": "0x42",
@@ -179,7 +179,7 @@
         "CounterHTOff": "0,1,2,3"
     },
     {
-        "PublicDescription": "This event counts L1D data line replacements.  Replacements occur when a new line is brought into the cache, causing eviction of a line loaded earlier.  ",
+        "PublicDescription": "This event counts L1D data line replacements.  Replacements occur when a new line is brought into the cache, causing eviction of a line loaded earlier.",
         "EventCode": "0x51",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
tools/perf/pmu-events/arch/x86/jaketown/pipeline.json +4 -8
index 34a519d9bfa0..783a5b4a67b1 100644
@@ -1,7 +1,6 @@
 [
     {
-        "PublicDescription": "This event counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, this event counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers. ",
-        "EventCode": "0x00",
+        "PublicDescription": "This event counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, this event counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers.",
         "Counter": "Fixed counter 1",
         "UMask": "0x1",
         "EventName": "INST_RETIRED.ANY",
@@ -10,8 +9,7 @@
         "CounterHTOff": "Fixed counter 1"
     },
     {
-        "PublicDescription": "This event counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. ",
-        "EventCode": "0x00",
+        "PublicDescription": "This event counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.",
         "Counter": "Fixed counter 2",
         "UMask": "0x2",
         "EventName": "CPU_CLK_UNHALTED.THREAD",
@@ -20,8 +18,7 @@
         "CounterHTOff": "Fixed counter 2"
     },
     {
-        "PublicDescription": "This event counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. ",
-        "EventCode": "0x00",
+        "PublicDescription": "This event counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.",
         "Counter": "Fixed counter 3",
         "UMask": "0x3",
         "EventName": "CPU_CLK_UNHALTED.REF_TSC",
@@ -778,7 +775,7 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "This event counts loads that followed a store to the same address, where the data could not be forwarded inside the pipeline from the store to the load.  The most common reason why store forwarding would be blocked is when a load's address range overlaps with a preceding smaller uncompleted store.  See the table of not supported store forwards in the Intel? 64 and IA-32 Architectures Optimization Reference Manual.  The penalty for blocked store forwarding is that the load must wait for the store to complete before it can be issued.",
+        "PublicDescription": "This event counts loads that followed a store to the same address, where the data could not be forwarded inside the pipeline from the store to the load.  The most common reason why store forwarding would be blocked is when a load's address range overlaps with a preceeding smaller uncompleted store.  See the table of not supported store forwards in the Intel? 64 and IA-32 Architectures Optimization Reference Manual.  The penalty for blocked store forwarding is that the load must wait for the store to complete before it can be issued.",
         "EventCode": "0x03",
         "Counter": "0,1,2,3",
         "UMask": "0x2",
@@ -1098,7 +1095,6 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "EventCode": "0x00",
         "Counter": "Fixed counter 2",
         "UMask": "0x2",
         "AnyThread": "1",
author merge bot
#10 lore raw

[tip:perf/core] perf vendor events intel: Update SandyBridge events to v16

In reply to a message not in the archive
perf vendor events intel: Update SandyBridge events to v16
Commit-ID:  59da390e54a4bfa674c6a61727a5e0243ba0ad74
Gitweb:     https://git.kernel.org/tip/59da390e54a4bfa674c6a61727a5e0243ba0ad74
Author:     Andi Kleen <[email protected]>
AuthorDate: Thu, 14 Mar 2019 08:41:12 -0700
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 1 Apr 2019 15:23:33 -0300

perf vendor events intel: Update SandyBridge events to v16

---
 .../pmu-events/arch/x86/sandybridge/cache.json     |  680 +++++-----
 .../arch/x86/sandybridge/floating-point.json       |  126 +-
 .../pmu-events/arch/x86/sandybridge/frontend.json  |  268 ++--
 .../pmu-events/arch/x86/sandybridge/memory.json    |   68 +-
 .../pmu-events/arch/x86/sandybridge/other.json     |   18 +-
 .../pmu-events/arch/x86/sandybridge/pipeline.json  | 1338 ++++++++++----------
 .../arch/x86/sandybridge/virtual-memory.json       |  108 +-
 7 files changed, 1306 insertions(+), 1300 deletions(-)
tools/perf/pmu-events/arch/x86/sandybridge/cache.json +340 -340
index 16b04a20bc12..bb79e89c2049 100644
@@ -1,207 +1,200 @@
 [
     {
-        "PEBS": "1",
-        "EventCode": "0xD0",
+        "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x11",
-        "EventName": "MEM_UOPS_RETIRED.STLB_MISS_LOADS",
-        "SampleAfterValue": "100003",
-        "BriefDescription": "Retired load uops that miss the STLB.",
-        "CounterHTOff": "0,1,2,3"
+        "UMask": "0x1",
+        "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "Demand Data Read requests that hit L2 cache.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "EventCode": "0xD0",
+        "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x12",
-        "EventName": "MEM_UOPS_RETIRED.STLB_MISS_STORES",
-        "SampleAfterValue": "100003",
-        "BriefDescription": "Retired store uops that miss the STLB.",
-        "CounterHTOff": "0,1,2,3"
+        "UMask": "0x3",
+        "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "Demand Data Read requests.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "EventCode": "0xD0",
+        "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x21",
-        "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS",
-        "SampleAfterValue": "100007",
-        "BriefDescription": "Retired load uops with locked access.",
-        "CounterHTOff": "0,1,2,3"
+        "UMask": "0x4",
+        "EventName": "L2_RQSTS.RFO_HIT",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "RFO requests that hit L2 cache.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "PublicDescription": "This event counts line-split load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
-        "EventCode": "0xD0",
+        "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x41",
-        "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS",
-        "SampleAfterValue": "100003",
-        "BriefDescription": "Retired load uops that split across a cacheline boundary.",
-        "CounterHTOff": "0,1,2,3"
+        "UMask": "0x8",
+        "EventName": "L2_RQSTS.RFO_MISS",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "RFO requests that miss L2 cache.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "PublicDescription": "This event counts line-split store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
-        "EventCode": "0xD0",
+        "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x42",
-        "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES",
-        "SampleAfterValue": "100003",
-        "BriefDescription": "Retired store uops that split across a cacheline boundary.",
-        "CounterHTOff": "0,1,2,3"
+        "UMask": "0xc",
+        "EventName": "L2_RQSTS.ALL_RFO",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "RFO requests to L2 cache.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "PublicDescription": "This event counts the number of load uops retired",
-        "EventCode": "0xD0",
+        "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x81",
-        "EventName": "MEM_UOPS_RETIRED.ALL_LOADS",
-        "SampleAfterValue": "2000003",
-        "BriefDescription": "All retired load uops.",
-        "CounterHTOff": "0,1,2,3"
+        "UMask": "0x10",
+        "EventName": "L2_RQSTS.CODE_RD_HIT",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "L2 cache hits when fetching instructions, code reads.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "PublicDescription": "This event counts the number of store uops retired.",
-        "EventCode": "0xD0",
+        "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x82",
-        "EventName": "MEM_UOPS_RETIRED.ALL_STORES",
-        "SampleAfterValue": "2000003",
-        "BriefDescription": "All retired store uops.",
-        "CounterHTOff": "0,1,2,3"
+        "UMask": "0x20",
+        "EventName": "L2_RQSTS.CODE_RD_MISS",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "L2 cache misses when fetching instructions.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "EventCode": "0xD1",
+        "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x1",
-        "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT",
-        "SampleAfterValue": "2000003",
-        "BriefDescription": "Retired load uops with L1 cache hits as data sources.",
-        "CounterHTOff": "0,1,2,3"
+        "UMask": "0x30",
+        "EventName": "L2_RQSTS.ALL_CODE_RD",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "L2 code requests.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "EventCode": "0xD1",
+        "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x2",
-        "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT",
-        "SampleAfterValue": "100003",
-        "BriefDescription": "Retired load uops with L2 cache hits as data sources.",
-        "CounterHTOff": "0,1,2,3"
+        "UMask": "0x40",
+        "EventName": "L2_RQSTS.PF_HIT",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "Requests from the L2 hardware prefetchers that hit L2 cache.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "PublicDescription": "This event counts retired load uops that hit in the last-level (L3) cache without snoops required.",
-        "EventCode": "0xD1",
+        "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x4",
-        "EventName": "MEM_LOAD_UOPS_RETIRED.LLC_HIT",
-        "SampleAfterValue": "50021",
-        "BriefDescription": "Retired load uops which data sources were data hits in LLC without snoops required.",
-        "CounterHTOff": "0,1,2,3"
+        "UMask": "0x80",
+        "EventName": "L2_RQSTS.PF_MISS",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "Requests from the L2 hardware prefetchers that miss L2 cache.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "EventCode": "0xD1",
+        "EventCode": "0x24",
         "Counter": "0,1,2,3",
-        "UMask": "0x40",
-        "EventName": "MEM_LOAD_UOPS_RETIRED.HIT_LFB",
-        "SampleAfterValue": "100003",
-        "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready.",
-        "CounterHTOff": "0,1,2,3"
+        "UMask": "0xc0",
+        "EventName": "L2_RQSTS.ALL_PF",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "Requests from L2 hardware prefetchers.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "EventCode": "0xD2",
+        "EventCode": "0x27",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS",
-        "SampleAfterValue": "20011",
-        "BriefDescription": "Retired load uops which data sources were LLC hit and cross-core snoop missed in on-pkg core cache.",
-        "CounterHTOff": "0,1,2,3"
-    },
-    {
-        "PEBS": "1",
-        "PublicDescription": "This event counts retired load uops that hit in the last-level cache (L3) and were found in a non-modified state in a neighboring core's private cache (same package).  Since the last level cache is inclusive, hits to the L3 may require snooping the private L2 caches of any cores on the same socket that have the line.  In this case, a snoop was required, and another L2 had the line in a non-modified state.",
-        "EventCode": "0xD2",
-        "Counter": "0,1,2,3",
-        "UMask": "0x2",
-        "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT",
-        "SampleAfterValue": "20011",
-        "BriefDescription": "Retired load uops which data sources were LLC and cross-core snoop hits in on-pkg core cache.",
-        "CounterHTOff": "0,1,2,3"
+        "EventName": "L2_STORE_LOCK_RQSTS.MISS",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "RFOs that miss cache lines.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "PublicDescription": "This event counts retired load uops that hit in the last-level cache (L3) and were found in a non-modified state in a neighboring core's private cache (same package).  Since the last level cache is inclusive, hits to the L3 may require snooping the private L2 caches of any cores on the same socket that have the line.  In this case, a snoop was required, and another L2 had the line in a modified state, so the line had to be invalidated in that L2 cache and transferred to the requesting L2.",
-        "EventCode": "0xD2",
+        "EventCode": "0x27",
         "Counter": "0,1,2,3",
         "UMask": "0x4",
-        "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM",
-        "SampleAfterValue": "20011",
-        "BriefDescription": "Retired load uops which data sources were HitM responses from shared LLC.",
-        "CounterHTOff": "0,1,2,3"
+        "EventName": "L2_STORE_LOCK_RQSTS.HIT_E",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "RFOs that hit cache lines in E state.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "EventCode": "0xD2",
+        "EventCode": "0x27",
         "Counter": "0,1,2,3",
         "UMask": "0x8",
-        "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_NONE",
-        "SampleAfterValue": "100003",
-        "BriefDescription": "Retired load uops which data sources were hits in LLC without snoops required.",
-        "CounterHTOff": "0,1,2,3"
+        "EventName": "L2_STORE_LOCK_RQSTS.HIT_M",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "RFOs that hit cache lines in M state.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PEBS": "1",
-        "PublicDescription": "This event counts retired demand loads that missed the  last-level (L3) cache. This means that the load is usually satisfied from memory in a client system or possibly from the remote socket in a server. Demand loads are non speculative load uops.",
-        "EventCode": "0xD4",
+        "EventCode": "0x27",
         "Counter": "0,1,2,3",
-        "UMask": "0x2",
-        "EventName": "MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS",
-        "SampleAfterValue": "100007",
-        "BriefDescription": "Retired load uops with unknown information as data source in cache serviced the load.",
-        "CounterHTOff": "0,1,2,3"
+        "UMask": "0xf",
+        "EventName": "L2_STORE_LOCK_RQSTS.ALL",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "RFOs that access cache lines in any state.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "PublicDescription": "This event counts L1D data line replacements.  Replacements occur when a new line is brought into the cache, causing eviction of a line loaded earlier.  ",
-        "EventCode": "0x51",
+        "EventCode": "0x28",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "L1D.REPLACEMENT",
-        "SampleAfterValue": "2000003",
-        "BriefDescription": "L1D data line replacements.",
+        "EventName": "L2_L1D_WB_RQSTS.MISS",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "Count the number of modified Lines evicted from L1 and missed L2. (Non-rejected WBs from the DCU.).",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "EventCode": "0x51",
+        "EventCode": "0x28",
         "Counter": "0,1,2,3",
         "UMask": "0x2",
-        "EventName": "L1D.ALLOCATED_IN_M",
-        "SampleAfterValue": "2000003",
-        "BriefDescription": "Allocated L1D data cache lines in M state.",
+        "EventName": "L2_L1D_WB_RQSTS.HIT_S",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in S state.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "EventCode": "0x51",
+        "EventCode": "0x28",
         "Counter": "0,1,2,3",
         "UMask": "0x4",
-        "EventName": "L1D.EVICTION",
-        "SampleAfterValue": "2000003",
-        "BriefDescription": "L1D data cache lines in M state evicted due to replacement.",
+        "EventName": "L2_L1D_WB_RQSTS.HIT_E",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in E state.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "EventCode": "0x51",
+        "EventCode": "0x28",
         "Counter": "0,1,2,3",
         "UMask": "0x8",
-        "EventName": "L1D.ALL_M_REPLACEMENT",
-        "SampleAfterValue": "2000003",
-        "BriefDescription": "Cache lines in M state evicted out of L1D due to Snoop HitM or dirty line replacement.",
+        "EventName": "L2_L1D_WB_RQSTS.HIT_M",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in M state.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
+    {
+        "EventCode": "0x28",
+        "Counter": "0,1,2,3",
+        "UMask": "0xf",
+        "EventName": "L2_L1D_WB_RQSTS.ALL",
+        "SampleAfterValue": "200003",
+        "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in any state.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
+    {
+        "EventCode": "0x2E",
+        "Counter": "0,1,2,3",
+        "UMask": "0x41",
+        "EventName": "LONGEST_LAT_CACHE.MISS",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Core-originated cacheable demand requests missed LLC.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
+    {
+        "EventCode": "0x2E",
+        "Counter": "0,1,2,3",
+        "UMask": "0x4f",
+        "EventName": "LONGEST_LAT_CACHE.REFERENCE",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Core-originated cacheable demand requests that refer to LLC.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
@@ -224,12 +217,61 @@
         "CounterHTOff": "2"
     },
     {
-        "EventCode": "0x63",
+        "EventCode": "0x48",
+        "Counter": "2",
+        "UMask": "0x1",
+        "AnyThread": "1",
+        "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core.",
+        "CounterMask": "1",
+        "CounterHTOff": "2"
+    },
+    {
+        "EventCode": "0x48",
         "Counter": "0,1,2,3",
         "UMask": "0x2",
-        "EventName": "LOCK_CYCLES.CACHE_LOCK_DURATION",
+        "EventName": "L1D_PEND_MISS.FB_FULL",
         "SampleAfterValue": "2000003",
-        "BriefDescription": "Cycles when L1D is locked.",
+        "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability.",
+        "CounterMask": "1",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
+    {
+        "PublicDescription": "This event counts L1D data line replacements.  Replacements occur when a new line is brought into the cache, causing eviction of a line loaded earlier.",
+        "EventCode": "0x51",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "L1D.REPLACEMENT",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "L1D data line replacements.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
+    {
+        "EventCode": "0x51",
+        "Counter": "0,1,2,3",
+        "UMask": "0x2",
+        "EventName": "L1D.ALLOCATED_IN_M",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "Allocated L1D data cache lines in M state.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
+    {
+        "EventCode": "0x51",
+        "Counter": "0,1,2,3",
+        "UMask": "0x4",
+        "EventName": "L1D.EVICTION",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "L1D data cache lines in M state evicted due to replacement.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
+    {
+        "EventCode": "0x51",
+        "Counter": "0,1,2,3",
+        "UMask": "0x8",
+        "EventName": "L1D.ALL_M_REPLACEMENT",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "Cache lines in M state evicted out of L1D due to Snoop HitM or dirty line replacement.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
@@ -251,6 +293,16 @@
         "CounterMask": "1",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
+    {
+        "EventCode": "0x60",
+        "Counter": "0,1,2,3",
+        "UMask": "0x1",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_C6",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.",
+        "CounterMask": "6",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
     {
         "EventCode": "0x60",
         "Counter": "0,1,2,3",
@@ -260,6 +312,16 @@
         "BriefDescription": "Offcore outstanding RFO store transactions in SuperQueue (SQ), queue to uncore.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
+    {
+        "EventCode": "0x60",
+        "Counter": "0,1,2,3",
+        "UMask": "0x4",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle.",
+        "CounterMask": "1",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
     {
         "EventCode": "0x60",
         "Counter": "0,1,2,3",
@@ -279,6 +341,15 @@
         "CounterMask": "1",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
+    {
+        "EventCode": "0x63",
+        "Counter": "0,1,2,3",
+        "UMask": "0x2",
+        "EventName": "LOCK_CYCLES.CACHE_LOCK_DURATION",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "Cycles when L1D is locked.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
     {
         "EventCode": "0xB0",
         "Counter": "0,1,2,3",
@@ -325,148 +396,182 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "EventCode": "0x24",
+        "EventCode": "0xBF",
         "Counter": "0,1,2,3",
-        "UMask": "0x1",
-        "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "Demand Data Read requests that hit L2 cache.",
+        "UMask": "0x5",
+        "EventName": "L1D_BLOCKS.BANK_CONFLICT_CYCLES",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Cycles when dispatched loads are cancelled due to L1D bank conflicts with other load ports.",
+        "CounterMask": "1",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
-        "EventCode": "0x24",
+        "PEBS": "1",
+        "EventCode": "0xD0",
         "Counter": "0,1,2,3",
-        "UMask": "0x4",
-        "EventName": "L2_RQSTS.RFO_HIT",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "RFO requests that hit L2 cache.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "UMask": "0x11",
+        "EventName": "MEM_UOPS_RETIRED.STLB_MISS_LOADS",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Retired load uops that miss the STLB. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x24",
+        "PEBS": "1",
+        "EventCode": "0xD0",
         "Counter": "0,1,2,3",
-        "UMask": "0x8",
-        "EventName": "L2_RQSTS.RFO_MISS",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "RFO requests that miss L2 cache.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "UMask": "0x12",
+        "EventName": "MEM_UOPS_RETIRED.STLB_MISS_STORES",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Retired store uops that miss the STLB. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "PEBS": "1",
+        "EventCode": "0xD0",
+        "Counter": "0,1,2,3",
+        "UMask": "0x21",
+        "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS",
+        "SampleAfterValue": "100007",
+        "BriefDescription": "Retired load uops with locked access. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x24",
+        "PEBS": "1",
+        "PublicDescription": "This event counts line-splitted load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K). (Precise Event - PEBS)",
+        "EventCode": "0xD0",
         "Counter": "0,1,2,3",
-        "UMask": "0x10",
-        "EventName": "L2_RQSTS.CODE_RD_HIT",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "L2 cache hits when fetching instructions, code reads.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "UMask": "0x41",
+        "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Retired load uops that split across a cacheline boundary. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x24",
+        "PEBS": "1",
+        "PublicDescription": "This event counts line-splitted store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K). (Precise Event - PEBS)",
+        "EventCode": "0xD0",
         "Counter": "0,1,2,3",
-        "UMask": "0x20",
-        "EventName": "L2_RQSTS.CODE_RD_MISS",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "L2 cache misses when fetching instructions.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "UMask": "0x42",
+        "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Retired store uops that split across a cacheline boundary. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x24",
+        "PEBS": "1",
+        "PublicDescription": "This event counts the number of load uops retired (Precise Event)",
+        "EventCode": "0xD0",
         "Counter": "0,1,2,3",
-        "UMask": "0x40",
-        "EventName": "L2_RQSTS.PF_HIT",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "Requests from the L2 hardware prefetchers that hit L2 cache.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "UMask": "0x81",
+        "EventName": "MEM_UOPS_RETIRED.ALL_LOADS",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "All retired load uops. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x24",
+        "PEBS": "1",
+        "PublicDescription": "This event counts the number of store uops retired. (Precise Event - PEBS)",
+        "EventCode": "0xD0",
         "Counter": "0,1,2,3",
-        "UMask": "0x80",
-        "EventName": "L2_RQSTS.PF_MISS",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "Requests from the L2 hardware prefetchers that miss L2 cache.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "UMask": "0x82",
+        "EventName": "MEM_UOPS_RETIRED.ALL_STORES",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "All retired store uops. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x27",
+        "PEBS": "1",
+        "EventCode": "0xD1",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "L2_STORE_LOCK_RQSTS.MISS",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "RFOs that miss cache lines.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "Retired load uops with L1 cache hits as data sources. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x27",
+        "PEBS": "1",
+        "EventCode": "0xD1",
         "Counter": "0,1,2,3",
-        "UMask": "0x4",
-        "EventName": "L2_STORE_LOCK_RQSTS.HIT_E",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "RFOs that hit cache lines in E state.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "UMask": "0x2",
+        "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Retired load uops with L2 cache hits as data sources. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x27",
+        "PEBS": "1",
+        "PublicDescription": "This event counts retired load uops that hit in the last-level (L3) cache without snoops required. (Precise Event - PEBS)",
+        "EventCode": "0xD1",
         "Counter": "0,1,2,3",
-        "UMask": "0x8",
-        "EventName": "L2_STORE_LOCK_RQSTS.HIT_M",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "RFOs that hit cache lines in M state.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "UMask": "0x4",
+        "EventName": "MEM_LOAD_UOPS_RETIRED.LLC_HIT",
+        "SampleAfterValue": "50021",
+        "BriefDescription": "Retired load uops which data sources were data hits in LLC without snoops required. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x27",
+        "PEBS": "1",
+        "EventCode": "0xD1",
         "Counter": "0,1,2,3",
-        "UMask": "0xf",
-        "EventName": "L2_STORE_LOCK_RQSTS.ALL",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "RFOs that access cache lines in any state.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "UMask": "0x40",
+        "EventName": "MEM_LOAD_UOPS_RETIRED.HIT_LFB",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x28",
+        "PEBS": "1",
+        "EventCode": "0xD2",
         "Counter": "0,1,2,3",
         "UMask": "0x1",
-        "EventName": "L2_L1D_WB_RQSTS.MISS",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "Count the number of modified Lines evicted from L1 and missed L2. (Non-rejected WBs from the DCU.).",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS",
+        "SampleAfterValue": "20011",
+        "BriefDescription": "Retired load uops which data sources were LLC hit and cross-core snoop missed in on-pkg core cache. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x28",
+        "PEBS": "1",
+        "PublicDescription": "This event counts retired load uops that hit in the last-level cache (L3) and were found in a non-modified state in a neighboring core's private cache (same package).  Since the last level cache is inclusive, hits to the L3 may require snooping the private L2 caches of any cores on the same socket that have the line.  In this case, a snoop was required, and another L2 had the line in a non-modified state. (Precise Event - PEBS)",
+        "EventCode": "0xD2",
         "Counter": "0,1,2,3",
         "UMask": "0x2",
-        "EventName": "L2_L1D_WB_RQSTS.HIT_S",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in S state.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT",
+        "SampleAfterValue": "20011",
+        "BriefDescription": "Retired load uops which data sources were LLC and cross-core snoop hits in on-pkg core cache. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x28",
+        "PEBS": "1",
+        "PublicDescription": "This event counts retired load uops that hit in the last-level cache (L3) and were found in a non-modified state in a neighboring core's private cache (same package).  Since the last level cache is inclusive, hits to the L3 may require snooping the private L2 caches of any cores on the same socket that have the line.  In this case, a snoop was required, and another L2 had the line in a modified state, so the line had to be invalidated in that L2 cache and transferred to the requesting L2. (Precise Event - PEBS)",
+        "EventCode": "0xD2",
         "Counter": "0,1,2,3",
         "UMask": "0x4",
-        "EventName": "L2_L1D_WB_RQSTS.HIT_E",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in E state.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM",
+        "SampleAfterValue": "20011",
+        "BriefDescription": "Retired load uops which data sources were HitM responses from shared LLC. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x28",
+        "PEBS": "1",
+        "EventCode": "0xD2",
         "Counter": "0,1,2,3",
         "UMask": "0x8",
-        "EventName": "L2_L1D_WB_RQSTS.HIT_M",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in M state.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_NONE",
+        "SampleAfterValue": "100003",
+        "BriefDescription": "Retired load uops which data sources were hits in LLC without snoops required. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
-        "EventCode": "0x28",
+        "PEBS": "1",
+        "PublicDescription": "This event counts retired demand loads that missed the  last-level (L3) cache. This means that the load is usually satisfied from memory in a client system or possibly from the remote socket in a server. Demand loads are non speculative load uops. (Precise Event - PEBS)",
+        "EventCode": "0xD4",
         "Counter": "0,1,2,3",
-        "UMask": "0xf",
-        "EventName": "L2_L1D_WB_RQSTS.ALL",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in any state.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
+        "UMask": "0x2",
+        "EventName": "MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS",
+        "SampleAfterValue": "100007",
+        "BriefDescription": "Retired load uops with unknown information as data source in cache serviced the load. (Precise Event - PEBS).",
+        "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xF0",
@@ -622,24 +727,6 @@
         "BriefDescription": "Dirty L2 cache lines filling the L2.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
-    {
-        "EventCode": "0x2E",
-        "Counter": "0,1,2,3",
-        "UMask": "0x41",
-        "EventName": "LONGEST_LAT_CACHE.MISS",
-        "SampleAfterValue": "100003",
-        "BriefDescription": "Core-originated cacheable demand requests missed LLC.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x2E",
-        "Counter": "0,1,2,3",
-        "UMask": "0x4f",
-        "EventName": "LONGEST_LAT_CACHE.REFERENCE",
-        "SampleAfterValue": "100003",
-        "BriefDescription": "Core-originated cacheable demand requests that refer to LLC.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
     {
         "EventCode": "0xF4",
         "Counter": "0,1,2,3",
@@ -649,93 +736,6 @@
         "BriefDescription": "Split locks in SQ.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
-    {
-        "EventCode": "0x24",
-        "Counter": "0,1,2,3",
-        "UMask": "0x3",
-        "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "Demand Data Read requests.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x24",
-        "Counter": "0,1,2,3",
-        "UMask": "0xc",
-        "EventName": "L2_RQSTS.ALL_RFO",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "RFO requests to L2 cache.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x24",
-        "Counter": "0,1,2,3",
-        "UMask": "0x30",
-        "EventName": "L2_RQSTS.ALL_CODE_RD",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "L2 code requests.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x24",
-        "Counter": "0,1,2,3",
-        "UMask": "0xc0",
-        "EventName": "L2_RQSTS.ALL_PF",
-        "SampleAfterValue": "200003",
-        "BriefDescription": "Requests from L2 hardware prefetchers.",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0xBF",
-        "Counter": "0,1,2,3",
-        "UMask": "0x5",
-        "EventName": "L1D_BLOCKS.BANK_CONFLICT_CYCLES",
-        "SampleAfterValue": "100003",
-        "BriefDescription": "Cycles when dispatched loads are cancelled due to L1D bank conflicts with other load ports.",
-        "CounterMask": "1",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x60",
-        "Counter": "0,1,2,3",
-        "UMask": "0x4",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO",
-        "SampleAfterValue": "2000003",
-        "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle.",
-        "CounterMask": "1",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x60",
-        "Counter": "0,1,2,3",
-        "UMask": "0x1",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_C6",
-        "SampleAfterValue": "2000003",
-        "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.",
-        "CounterMask": "6",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x48",
-        "Counter": "2",
-        "UMask": "0x1",
-        "AnyThread": "1",
-        "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY",
-        "SampleAfterValue": "2000003",
-        "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core.",
-        "CounterMask": "1",
-        "CounterHTOff": "2"
-    },
-    {
-        "EventCode": "0x48",
-        "Counter": "0,1,2,3",
-        "UMask": "0x2",
-        "EventName": "L1D_PEND_MISS.FB_FULL",
-        "SampleAfterValue": "2000003",
-        "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability.",
-        "CounterMask": "1",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
     {
         "EventCode": "0xB7, 0xBB",
         "MSRValue": "0x10003c0244",
@@ -1825,7 +1825,7 @@
         "EventName": "OFFCORE_RESPONSE.DATA_IN.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": " REQUEST = DATA_INTO_CORE and RESPONSE = ANY_RESPONSE",
+        "BriefDescription": "REQUEST = DATA_INTO_CORE and RESPONSE = ANY_RESPONSE",
         "CounterHTOff": "0,1,2,3"
     },
     {
@@ -1837,7 +1837,7 @@
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT_M.HITM",
         "MSRIndex": "0x1a6,0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": " REQUEST = DEMAND_RFO and RESPONSE = LLC_HIT_M and SNOOP = HITM",
+        "BriefDescription": "REQUEST = DEMAND_RFO and RESPONSE = LLC_HIT_M and SNOOP = HITM",
         "CounterHTOff": "0,1,2,3"
     },
     {
@@ -1849,7 +1849,7 @@
         "EventName": "OFFCORE_RESPONSE.PF_IFETCH.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": " REQUEST = PF_RFO and RESPONSE = ANY_RESPONSE",
+        "BriefDescription": "REQUEST = PF_RFO and RESPONSE = ANY_RESPONSE",
         "CounterHTOff": "0,1,2,3"
     },
     {
@@ -1861,7 +1861,7 @@
         "EventName": "OFFCORE_RESPONSE.PF_L_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": " REQUEST = PF_LLC_DATA_RD and RESPONSE = ANY_RESPONSE",
+        "BriefDescription": "REQUEST = PF_LLC_DATA_RD and RESPONSE = ANY_RESPONSE",
         "CounterHTOff": "0,1,2,3"
     },
     {
@@ -1873,7 +1873,7 @@
         "EventName": "OFFCORE_RESPONSE.PF_L_IFETCH.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": " REQUEST = PF_LLC_IFETCH and RESPONSE = ANY_RESPONSE",
+        "BriefDescription": "REQUEST = PF_LLC_IFETCH and RESPONSE = ANY_RESPONSE",
         "CounterHTOff": "0,1,2,3"
     }
 ]
\ No newline at end of file
tools/perf/pmu-events/arch/x86/sandybridge/floating-point.json +63 -63

136 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/sandybridge/frontend.json +134 -134

399 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/sandybridge/memory.json +34 -34

121 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/sandybridge/other.json +9 -9
index 64b195b82c50..874eb40a2e0f 100644
@@ -8,6 +8,15 @@
         "BriefDescription": "Valid instructions written to IQ per cycle.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
+    {
+        "EventCode": "0x4E",
+        "Counter": "0,1,2,3",
+        "UMask": "0x2",
+        "EventName": "HW_PRE_REQ.DL1_MISS",
+        "SampleAfterValue": "2000003",
+        "BriefDescription": "Hardware Prefetch requests that miss the L1D cache. This accounts for both L1 streamer and IP-based (IPP) HW prefetchers. A request is being counted each time it access the cache & miss it, including if a block is applicable or if hit the Fill Buffer for .",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
     {
         "EventCode": "0x5C",
         "Counter": "0,1,2,3",
@@ -37,15 +46,6 @@
         "BriefDescription": "Unhalted core cycles when thread is in rings 1, 2, or 3.",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
-    {
-        "EventCode": "0x4E",
-        "Counter": "0,1,2,3",
-        "UMask": "0x2",
-        "EventName": "HW_PRE_REQ.DL1_MISS",
-        "SampleAfterValue": "2000003",
-        "BriefDescription": "Hardware Prefetch requests that miss the L1D cache. This accounts for both L1 streamer and IP-based (IPP) HW prefetchers. A request is being counted each time it access the cache & miss it, including if a block is applicable or if hit the Fill Buffer for .",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
     {
         "EventCode": "0x63",
         "Counter": "0,1,2,3",
tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json +672 -666

1,436 lines not on this page · raw message

tools/perf/pmu-events/arch/x86/sandybridge/virtual-memory.json +54 -54

108 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Part of the diff is not shown here. View the raw message.

author merge bot
#11 lore raw

[tip:perf/core] perf vendor events intel: Update IvyBridge events to v21

In reply to a message not in the archive
perf vendor events intel: Update IvyBridge events to v21
Commit-ID:  2111da70ff1094ed65d15f00e6285b668f689b87
Gitweb:     https://git.kernel.org/tip/2111da70ff1094ed65d15f00e6285b668f689b87
Author:     Andi Kleen <[email protected]>
AuthorDate: Thu, 14 Mar 2019 08:41:35 -0700
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 1 Apr 2019 15:23:35 -0300

perf vendor events intel: Update IvyBridge events to v21

---
 tools/perf/pmu-events/arch/x86/ivybridge/cache.json    | 10 +++++-----
 tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json |  4 ----
 2 files changed, 5 insertions(+), 9 deletions(-)
tools/perf/pmu-events/arch/x86/ivybridge/cache.json +5 -5
index 999a01bc6467..5f6cb2abc384 100644
@@ -1012,7 +1012,7 @@
         "EventName": "OFFCORE_RESPONSE.SPLIT_LOCK_UC_LOCK.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts requests where the address of an atomic lock instruction spans a cache line boundary or the lock instruction is executed on uncacheable address ",
+        "BriefDescription": "Counts requests where the address of an atomic lock instruction spans a cache line boundary or the lock instruction is executed on uncacheable address",
         "CounterHTOff": "0,1,2,3"
     },
     {
@@ -1036,7 +1036,7 @@
         "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand data reads ",
+        "BriefDescription": "Counts all demand data reads",
         "CounterHTOff": "0,1,2,3"
     },
     {
@@ -1048,7 +1048,7 @@
         "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand rfo's ",
+        "BriefDescription": "Counts all demand rfo's",
         "CounterHTOff": "0,1,2,3"
     },
     {
@@ -1084,7 +1084,7 @@
         "EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all demand & prefetch prefetch RFOs ",
+        "BriefDescription": "Counts all demand & prefetch prefetch RFOs",
         "CounterHTOff": "0,1,2,3"
     },
     {
@@ -1096,7 +1096,7 @@
         "EventName": "OFFCORE_RESPONSE.ALL_READS.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
         "SampleAfterValue": "100003",
-        "BriefDescription": "Counts all data/code/rfo references (demand & prefetch) ",
+        "BriefDescription": "Counts all data/code/rfo references (demand & prefetch)",
         "CounterHTOff": "0,1,2,3"
     }
 ]
\ No newline at end of file
tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json +0 -4
index 0afbfd95ea30..2a0aad91d83d 100644
@@ -1,6 +1,5 @@
 [
     {
-        "EventCode": "0x00",
         "Counter": "Fixed counter 0",
         "UMask": "0x1",
         "EventName": "INST_RETIRED.ANY",
@@ -9,7 +8,6 @@
         "CounterHTOff": "Fixed counter 0"
     },
     {
-        "EventCode": "0x00",
         "Counter": "Fixed counter 1",
         "UMask": "0x2",
         "EventName": "CPU_CLK_UNHALTED.THREAD",
@@ -19,7 +17,6 @@
     },
     {
         "PublicDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
-        "EventCode": "0x00",
         "Counter": "Fixed counter 1",
         "UMask": "0x2",
         "AnyThread": "1",
@@ -29,7 +26,6 @@
         "CounterHTOff": "Fixed counter 1"
     },
     {
-        "EventCode": "0x00",
         "Counter": "Fixed counter 2",
         "UMask": "0x3",
         "EventName": "CPU_CLK_UNHALTED.REF_TSC",