ieee1394: sbp2: enable auto spin-up for Maxtor disks
PATCH 1/1 ieee1394: sbp2: enable auto spin-up for Maxtor disks
At least Maxtor OneTouch III require a "start stop unit" command after auto spin-down before the next access can proceed. This patch activates the responsible code in scsi_mod for all Maxtor SBP-2 disks.
https://bugzilla.novell.com/show_bug.cgi?id=183011
Maybe that should be done for all SBP-2 disks, but better be cautious.
---
This patch is also available from the ieee1394 git tree:
http://www.kernel.org/git/?p=linux/kernel/git/bcollins/linux1394-2.6.git;a=commitdiff;h=31a379e1067834868b8f1ce3e409392c42dc0f2b
Fixes loss of connection if an external Maxtor disk automatically went into power saving mode.
Enthusiasts may pick up a variant of this patch for 2.6.16.y at
https://bugzilla.novell.com/show_bug.cgi?id=183011#c6
drivers/ieee1394/sbp2.c +3 -0
@@ -2515,6 +2515,9 @@ static int sbp2scsi_slave_configure(stru sdev->skip_ms_page_8 =1 ;if (scsi_id->workarounds &SBP2_WORKAROUND_FIX_CAPACITY ) sdev->fix_capacity =1 ; +if (scsi_id->ne->guid_vendor_id ==0x0010b9 &&/* Maxtor's OUI */ + (sdev->type ==TYPE_DISK || sdev->type ==TYPE_RBC )) + sdev->allow_restart =1 ;return 0 ; }
Greg KH
AppliedQuoted 8 lines · Stefan Richter
At least Maxtor OneTouch III require a "start stop unit" command after auto spin-down before the next access can proceed. This patch activates the responsible code in
scsi_modfor all Maxtor SBP-2 disks.
https://bugzilla.novell.com/show_bug.cgi?id=183011Maybe that should be done for all SBP-2 disks, but better be cautious.
Signed-off-by Stefan Richter <[email protected]>
Queued to -stable.
thanks,
greg k-h