Skip to contentSkip to conversation

firewire: ohci: access bus_seconds atomically

PATCH New Stefan Richter 1 participant 1 message Jun 4, 2009 Firewire

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 firewire: ohci: access bus_seconds atomically

In the unlikely event that card->driver->get_bus_time() is called during a cycle64Seconds interrupt, we could read garbage unless atomic accesses are used.

The switch to atomic ops requires to change the 64 seconds counter from unsigned to signed, but this shouldn't matter to the end result.

---
 drivers/firewire/fw-ohci.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/firewire/fw-ohci.c +4 -3
Index: linux/drivers/firewire/fw-ohci.c
===================================================================
@@ -31,6 +31,7 @@
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 
+#include <asm/atomic.h>
 #include <asm/page.h>
 #include <asm/system.h>
 
@@ -178,7 +179,7 @@ struct fw_ohci {
 	int node_id;
 	int generation;
 	int request_generation;	/* for timestamping incoming requests */
-	u32 bus_seconds;
+	atomic_t bus_seconds;
 
 	bool use_dualbuffer;
 	bool old_uninorth;
@@ -1434,7 +1435,7 @@ static irqreturn_t irq_handler(int irq, 
 	if (event & OHCI1394_cycle64Seconds) {
 		cycle_time = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
 		if ((cycle_time & 0x80000000) == 0)
-			ohci->bus_seconds++;
+			atomic_inc(&ohci->bus_seconds);
 	}
 
 	return IRQ_HANDLED;
@@ -1770,7 +1771,7 @@ static u64 ohci_get_bus_time(struct fw_c
 	u64 bus_time;
 
 	cycle_time = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
-	bus_time = ((u64) ohci->bus_seconds << 32) | cycle_time;
+	bus_time = ((u64)atomic_read(&ohci->bus_seconds) << 32) | cycle_time;
 
 	return bus_time;
 }
Signature · 3 lines
Stefan Richter
-=====-==--= -==- --=--
http://arcgraph.de/sr/