Skip to contentSkip to conversation

fix GitHub workflow working directories in MinGW builds

PATCH Superseded Marc Becker 3 participants 5 messages Apr 24, 2022 – Apr 26, 2022

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 fix GitHub workflow working directories in MinGW builds

replace hardcoded directory names with env variable version info bump pkcs11-helper version to 1.29.0
bump OpenSSL version to 1.1.1n
add OpenSSL version to cache key
use release file for pkcs11-helper archive
use OpenSSL URL endpoint with all/current versions

---
 .github/workflows/build.yaml | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)
.github/workflows/build.yaml +18 -18
index fa99e12b..34a9d9b9 100644
@@ -19,8 +19,8 @@ jobs:
     env:
       MAKEFLAGS: -j3
       LZO_VERSION: "2.10"
-      PKCS11_HELPER_VERSION: "1.26"
-      OPENSSL_VERSION: "1.1.1j"
+      PKCS11_HELPER_VERSION: "1.29.0"
+      OPENSSL_VERSION: "1.1.1n"
       TAP_WINDOWS_VERSION: "9.23.3"
       CHOST: ${{ matrix.chost }}
       TARGET: ${{ matrix.target }}
@@ -46,20 +46,20 @@ jobs:
         uses: actions/[email protected]...
         with:
           path: '~/mingw/'
-          key: ${{ matrix.target }}-mingw-${{ env.LZO_VERSION }}-${{ env.PKCS11_HELPER_VERSION }}-${{ env.TAP_WINDOWS_VERSION }}
+          key: ${{ matrix.target }}-mingw-${{ env.OPENSSL_VERSION }}-${{ env.LZO_VERSION }}-${{ env.PKCS11_HELPER_VERSION }}-${{ env.TAP_WINDOWS_VERSION }}
 
       # Repeating  if: steps.cache.outputs.cache-hit != 'true'
       # on every step for building dependencies is ugly but
       # I haven't found a better solution so far.
 
-      - name: Download mingw depnendencies
+      - name: Download mingw dependencies
         if: steps.cache.outputs.cache-hit != 'true'
         run: |
           wget -c -P download-cache/ "https://build.openvpn.net/downloads/releases/tap-windows-${TAP_WINDOWS_VERSION}.zip"
           wget -c -P download-cache/ "https://www.oberhumer.com/opensource/lzo/download/lzo-${LZO_VERSION}.tar.gz"
-          wget -c -P download-cache/ "https://github.com/OpenSC/pkcs11-helper/archive/pkcs11-helper-${PKCS11_HELPER_VERSION}.tar.gz"
-          wget -c -P download-cache/ "https://www.openssl.org/source/old/1.1.1/openssl-${OPENSSL_VERSION}.tar.gz"
-          tar zxf "download-cache/pkcs11-helper-${PKCS11_HELPER_VERSION}.tar.gz"
+          wget -c -P download-cache/ "https://github.com/OpenSC/pkcs11-helper/releases/download/pkcs11-helper-${PKCS11_HELPER_VERSION}/pkcs11-helper-${PKCS11_HELPER_VERSION}.tar.bz2"
+          wget -c -P download-cache/ "https://www.openssl.org/source/openssl-${OPENSSL_VERSION}.tar.gz"
+          tar jxf "download-cache/pkcs11-helper-${PKCS11_HELPER_VERSION}.tar.bz2"
           tar zxf "download-cache/openssl-${OPENSSL_VERSION}.tar.gz"
           tar zxf "download-cache/lzo-${LZO_VERSION}.tar.gz"
           unzip download-cache/tap-windows-${TAP_WINDOWS_VERSION}.zip
@@ -67,56 +67,56 @@ jobs:
       - name: Configure OpenSSL
         if: steps.cache.outputs.cache-hit != 'true'
         run: ./Configure --cross-compile-prefix=${CHOST}- shared ${{ matrix.target }} no-capieng --prefix="${HOME}/mingw/opt" --openssldir="${HOME}/mingw/opt" -static-libgcc
-        working-directory: "./openssl-1.1.1j"
+        working-directory: "./openssl-${{ env.OPENSSL_VERSION }}"
 
       - name: Build OpenSSL
         if: steps.cache.outputs.cache-hit != 'true'
         run: make
-        working-directory: "./openssl-1.1.1j/"
+        working-directory: "./openssl-${{ env.OPENSSL_VERSION }}"
 
       - name: Install OpenSSL
         if: steps.cache.outputs.cache-hit != 'true'
         run: make install
-        working-directory: "./openssl-1.1.1j/"
+        working-directory: "./openssl-${{ env.OPENSSL_VERSION }}"
 
       - name: autoreconf pkcs11-helper
         if: steps.cache.outputs.cache-hit != 'true'
         run: autoreconf -iv
-        working-directory: "./pkcs11-helper-pkcs11-helper-1.26"
+        working-directory: "./pkcs11-helper-${{ env.PKCS11_HELPER_VERSION }}"
 
       - name: configure pkcs11-helper
         if: steps.cache.outputs.cache-hit != 'true'
         run: OPENSSL_LIBS="-L${HOME}/mingw/opt/lib -lssl -lcrypto" OPENSSL_CFLAGS=-I$HOME/mingw/opt/include PKG_CONFIG_PATH=${HOME}/mingw/opt/lib/pkgconfig ./configure --host=${CHOST} --program-prefix='' --libdir=${HOME}/mingw/opt/lib --prefix=${HOME}/mingw/opt --build=x86_64-pc-linux-gnu --disable-crypto-engine-gnutls --disable-crypto-engine-nss --disable-crypto-engine-polarssl --disable-crypto-engine-mbedtls
-        working-directory: "./pkcs11-helper-pkcs11-helper-1.26"
+        working-directory: "./pkcs11-helper-${{ env.PKCS11_HELPER_VERSION }}"
 
       - name: build pkcs11-helper
         if: steps.cache.outputs.cache-hit != 'true'
         run: make all
-        working-directory: "./pkcs11-helper-pkcs11-helper-1.26"
+        working-directory: "./pkcs11-helper-${{ env.PKCS11_HELPER_VERSION }}"
 
       - name: install pkcs11-helper
         if: steps.cache.outputs.cache-hit != 'true'
         run: make install
-        working-directory: "./pkcs11-helper-pkcs11-helper-1.26"
+        working-directory: "./pkcs11-helper-${{ env.PKCS11_HELPER_VERSION }}"
 
       - name: Configure lzo
         if: steps.cache.outputs.cache-hit != 'true'
         run: ./configure --host=${CHOST} --program-prefix='' --libdir=${HOME}/mingw/opt/lib --prefix=${HOME}/mingw/opt --build=x86_64-pc-linux-gnu
-        working-directory: "./lzo-2.10"
+        working-directory: "./lzo-${{ env.LZO_VERSION }}"
 
       - name: build lzo
         if: steps.cache.outputs.cache-hit != 'true'
-        working-directory: "./lzo-2.10"
+        working-directory: "./lzo-${{ env.LZO_VERSION }}"
         run: make
 
       - name: install lzo
         if: steps.cache.outputs.cache-hit != 'true'
-        working-directory: "./lzo-2.10"
+        working-directory: "./lzo-${{ env.LZO_VERSION }}"
         run: make install
 
       - name: copy tap-windows.h header
         if: steps.cache.outputs.cache-hit != 'true'
-        run: cp ./tap-windows-9.23.3/include/tap-windows.h ${HOME}/mingw/opt/include/
+        run: cp ./tap-windows-${TAP_WINDOWS_VERSION}/include/tap-windows.h ${HOME}/mingw/opt/include/
 
       - name: configure OpenVPN
         run: PKG_CONFIG_PATH=${HOME}/mingw/opt/lib/pkgconfig DCO_SOURCEDIR=$(realpath ../ovpn-dco-win) LDFLAGS=-L$HOME/mingw/opt/lib CFLAGS=-I$HOME/mingw/opt/include OPENSSL_LIBS="-L${HOME}/opt/lib -lssl -lcrypto" OPENSSL_CFLAGS=-I$HOME/mingw/opt/include PREFIX=$HOME/mingw/opt LZO_CFLAGS=-I$HOME/mingw/opt/include LZO_LIBS="-L${HOME}/mingw/opt/lib -llzo2" ./configure  --host=${CHOST} --disable-lz4 --enable-dco

--
2.30.2

#1 lore raw

I recall that link "
https://www.openssl.org/source/openssl-${OPENSSL_VERSION}.tar.gz" becomes broken as soon as new version is released.
that is the way how openssl warns you to update.

"old" links are immutable.

пн, 25 апр. 2022 г. в 00:27, Marc Becker <[email protected]...>:

Quoted 169 lines

replace hardcoded directory names with env variable version info bump pkcs11-helper version to 1.29.0
bump OpenSSL version to 1.1.1n
add OpenSSL version to cache key
use release file for pkcs11-helper archive
use OpenSSL URL endpoint with all/current versions

---
 .github/workflows/build.yaml | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)
.github/workflows/build.yaml +4 -4
index fa99e12b..34a9d9b9 100644
@@ -19,8 +19,8 @@ jobs:
     env:
       MAKEFLAGS: -j3
       LZO_VERSION: "2.10"
-      PKCS11_HELPER_VERSION: "1.26"
-      OPENSSL_VERSION: "1.1.1j"
+      PKCS11_HELPER_VERSION: "1.29.0"
+      OPENSSL_VERSION: "1.1.1n"
       TAP_WINDOWS_VERSION: "9.23.3"
       CHOST: ${{ matrix.chost }}
       TARGET: ${{ matrix.target }}
@@ -46,20 +46,20 @@ jobs:
         uses: actions/[email protected]...
         with:
           path: '~/mingw/'
-          key: ${{ matrix.target }}-mingw-${{ env.LZO_VERSION }}-${{
 env.PKCS11_HELPER_VERSION }}-${{ env.TAP_WINDOWS_VERSION }}
+          key: ${{ matrix.target }}-mingw-${{ env.OPENSSL_VERSION }}-${{
 env.LZO_VERSION }}-${{ env.PKCS11_HELPER_VERSION }}-${{
 env.TAP_WINDOWS_VERSION }}
 
       # Repeating  if: steps.cache.outputs.cache-hit != 'true'
       # on every step for building dependencies is ugly but
       # I haven't found a better solution so far.
 
-      - name: Download mingw depnendencies
+      - name: Download mingw dependencies
         if: steps.cache.outputs.cache-hit != 'true'
         run: |
           wget -c -P download-cache/ "

https://build.openvpn.net/downloads/releases/tap-windows-${TAP_WINDOWS_VERSION}.zip
"
wget -c -P download-cache/ "
https://www.oberhumer.com/opensource/lzo/download/lzo-${LZO_VERSION}.tar.gz
"
- wget -c -P download-cache/ "
https://github.com/OpenSC/pkcs11-helper/archive/pkcs11-helper-${PKCS11_HELPER_VERSION}.tar.gz
"
- wget -c -P download-cache/ "
https://www.openssl.org/source/old/1.1.1/openssl-${OPENSSL_VERSION}.tar.gz
"
- tar zxf
"download-cache/pkcs11-helper-${PKCS11_HELPER_VERSION}.tar.gz"
+ wget -c -P download-cache/ "
https://github.com/OpenSC/pkcs11-helper/releases/download/pkcs11-helper-${PKCS11_HELPER_VERSION}/pkcs11-helper-${PKCS11_HELPER_VERSION}.tar.bz2
"
+ wget -c -P download-cache/ "
https://www.openssl.org/source/openssl-${OPENSSL_VERSION}.tar.gz"
+ tar jxf
"download-cache/pkcs11-helper-${PKCS11_HELPER_VERSION}.tar.bz2"

           tar zxf "download-cache/openssl-${OPENSSL_VERSION}.tar.gz"
           tar zxf "download-cache/lzo-${LZO_VERSION}.tar.gz"
           unzip download-cache/tap-windows-${TAP_WINDOWS_VERSION}.zip
.github/workflows/build.yaml +0 -0
@@ -67,56 +67,56 @@ jobs:
       - name: Configure OpenSSL
         if: steps.cache.outputs.cache-hit != 'true'
         run: ./Configure --cross-compile-prefix=${CHOST}- shared ${{

matrix.target }} no-capieng --prefix="${HOME}/mingw/opt" --openssldir="${HOME}/mingw/opt" -static-libgcc

.github/workflows/build.yaml +4 -4
-        working-directory: "./openssl-1.1.1j"
+        working-directory: "./openssl-${{ env.OPENSSL_VERSION }}"
 
       - name: Build OpenSSL
         if: steps.cache.outputs.cache-hit != 'true'
         run: make
-        working-directory: "./openssl-1.1.1j/"
+        working-directory: "./openssl-${{ env.OPENSSL_VERSION }}"
 
       - name: Install OpenSSL
         if: steps.cache.outputs.cache-hit != 'true'
         run: make install
-        working-directory: "./openssl-1.1.1j/"
+        working-directory: "./openssl-${{ env.OPENSSL_VERSION }}"
 
       - name: autoreconf pkcs11-helper
         if: steps.cache.outputs.cache-hit != 'true'
         run: autoreconf -iv
-        working-directory: "./pkcs11-helper-pkcs11-helper-1.26"
+        working-directory: "./pkcs11-helper-${{ env.PKCS11_HELPER_VERSION

}}"

       - name: configure pkcs11-helper
         if: steps.cache.outputs.cache-hit != 'true'
         run: OPENSSL_LIBS="-L${HOME}/mingw/opt/lib -lssl -lcrypto"

OPENSSL_CFLAGS=-I$HOME/mingw/opt/include PKG_CONFIG_PATH=${HOME}/mingw/opt/lib/pkgconfig ./configure --host=${CHOST} --program-prefix='' --libdir=${HOME}/mingw/opt/lib --prefix=${HOME}/mingw/opt --build=x86_64-pc-linux-gnu --disable-crypto-engine-gnutls --disable-crypto-engine-nss --disable-crypto-engine-polarssl --disable-crypto-engine-mbedtls

.github/workflows/build.yaml +1 -1
-        working-directory: "./pkcs11-helper-pkcs11-helper-1.26"
+        working-directory: "./pkcs11-helper-${{ env.PKCS11_HELPER_VERSION

}}"

- name: build pkcs11-helper
if: steps.cache.outputs.cache-hit != 'true'
run: make all

.github/workflows/build.yaml +1 -1
-        working-directory: "./pkcs11-helper-pkcs11-helper-1.26"
+        working-directory: "./pkcs11-helper-${{ env.PKCS11_HELPER_VERSION

}}"

- name: install pkcs11-helper
if: steps.cache.outputs.cache-hit != 'true'
run: make install

.github/workflows/build.yaml +1 -1
-        working-directory: "./pkcs11-helper-pkcs11-helper-1.26"
+        working-directory: "./pkcs11-helper-${{ env.PKCS11_HELPER_VERSION

}}"

       - name: Configure lzo
         if: steps.cache.outputs.cache-hit != 'true'
         run: ./configure --host=${CHOST} --program-prefix=''

--libdir=${HOME}/mingw/opt/lib --prefix=${HOME}/mingw/opt --build=x86_64-pc-linux-gnu

.github/workflows/build.yaml +3 -4
-        working-directory: "./lzo-2.10"
+        working-directory: "./lzo-${{ env.LZO_VERSION }}"
 
       - name: build lzo
         if: steps.cache.outputs.cache-hit != 'true'
-        working-directory: "./lzo-2.10"
+        working-directory: "./lzo-${{ env.LZO_VERSION }}"
         run: make
 
       - name: install lzo
         if: steps.cache.outputs.cache-hit != 'true'
-        working-directory: "./lzo-2.10"
+        working-directory: "./lzo-${{ env.LZO_VERSION }}"
         run: make install
 
       - name: copy tap-windows.h header
         if: steps.cache.outputs.cache-hit != 'true'
-        run: cp ./tap-windows-9.23.3/include/tap-windows.h

${HOME}/mingw/opt/include/
+ run: cp
./tap-windows-${TAP_WINDOWS_VERSION}/include/tap-windows.h ${HOME}/mingw/opt/include/

- name: configure OpenVPN
run: PKG_CONFIG_PATH=${HOME}/mingw/opt/lib/pkgconfig
DCO_SOURCEDIR=$(realpath ../ovpn-dco-win) LDFLAGS=-L$HOME/mingw/opt/lib CFLAGS=-I$HOME/mingw/opt/include OPENSSL_LIBS="-L${HOME}/opt/lib -lssl -lcrypto" OPENSSL_CFLAGS=-I$HOME/mingw/opt/include PREFIX=$HOME/mingw/opt LZO_CFLAGS=-I$HOME/mingw/opt/include LZO_LIBS="-L${HOME}/mingw/opt/lib -llzo2" ./configure --host=${CHOST} --disable-lz4 --enable-dco --
2.30.2

_______________________________________________
Openvpn-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-devel

#2 lore raw
Quoted 1 line

"old" links are immutable.   The "old" links also do not provide the latest versions (currently 1.1.1n & 3.0.2).   While the mirrors do follow the logic of having only the latest version on top level, it seams on the main site all versions can be fetched via this pattern (tested).   This way building a matrix with [ 1.0.2, 1.1.1n, 3.0.2 ] should also be possible with little effort.   It also does not require version→subpath magic for pre-3.0 versions (when OpenSSL introduced sane versioning).

#3 lore raw

PATCH v2 1/1 fix GitHub workflow working directories in MinGW builds

In reply to Marc Becker

replace hardcoded directory names with env variable version info bump pkcs11-helper version to 1.29.0
bump OpenSSL version to 1.1.1n
add OpenSSL version to cache key
use release file for pkcs11-helper archive
use OpenSSL URL endpoint with all/current versions

---

fix whitespace (lost during SMTP transfer, retry with base64)

 .github/workflows/build.yaml | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)
.github/workflows/build.yaml +18 -18
index fa99e12b..34a9d9b9 100644
@@ -19,8 +19,8 @@ jobs:
     env:
       MAKEFLAGS: -j3
       LZO_VERSION: "2.10"
-      PKCS11_HELPER_VERSION: "1.26"
-      OPENSSL_VERSION: "1.1.1j"
+      PKCS11_HELPER_VERSION: "1.29.0"
+      OPENSSL_VERSION: "1.1.1n"
       TAP_WINDOWS_VERSION: "9.23.3"
       CHOST: ${{ matrix.chost }}
       TARGET: ${{ matrix.target }}
@@ -46,20 +46,20 @@ jobs:
         uses: actions/[email protected]...
         with:
           path: '~/mingw/'
-          key: ${{ matrix.target }}-mingw-${{ env.LZO_VERSION }}-${{ env.PKCS11_HELPER_VERSION }}-${{ env.TAP_WINDOWS_VERSION }}
+          key: ${{ matrix.target }}-mingw-${{ env.OPENSSL_VERSION }}-${{ env.LZO_VERSION }}-${{ env.PKCS11_HELPER_VERSION }}-${{ env.TAP_WINDOWS_VERSION }}
 
       # Repeating  if: steps.cache.outputs.cache-hit != 'true'
       # on every step for building dependencies is ugly but
       # I haven't found a better solution so far.
 
-      - name: Download mingw depnendencies
+      - name: Download mingw dependencies
         if: steps.cache.outputs.cache-hit != 'true'
         run: |
           wget -c -P download-cache/ "https://build.openvpn.net/downloads/releases/tap-windows-${TAP_WINDOWS_VERSION}.zip"
           wget -c -P download-cache/ "https://www.oberhumer.com/opensource/lzo/download/lzo-${LZO_VERSION}.tar.gz"
-          wget -c -P download-cache/ "https://github.com/OpenSC/pkcs11-helper/archive/pkcs11-helper-${PKCS11_HELPER_VERSION}.tar.gz"
-          wget -c -P download-cache/ "https://www.openssl.org/source/old/1.1.1/openssl-${OPENSSL_VERSION}.tar.gz"
-          tar zxf "download-cache/pkcs11-helper-${PKCS11_HELPER_VERSION}.tar.gz"
+          wget -c -P download-cache/ "https://github.com/OpenSC/pkcs11-helper/releases/download/pkcs11-helper-${PKCS11_HELPER_VERSION}/pkcs11-helper-${PKCS11_HELPER_VERSION}.tar.bz2"
+          wget -c -P download-cache/ "https://www.openssl.org/source/openssl-${OPENSSL_VERSION}.tar.gz"
+          tar jxf "download-cache/pkcs11-helper-${PKCS11_HELPER_VERSION}.tar.bz2"
           tar zxf "download-cache/openssl-${OPENSSL_VERSION}.tar.gz"
           tar zxf "download-cache/lzo-${LZO_VERSION}.tar.gz"
           unzip download-cache/tap-windows-${TAP_WINDOWS_VERSION}.zip
@@ -67,56 +67,56 @@ jobs:
       - name: Configure OpenSSL
         if: steps.cache.outputs.cache-hit != 'true'
         run: ./Configure --cross-compile-prefix=${CHOST}- shared ${{ matrix.target }} no-capieng --prefix="${HOME}/mingw/opt" --openssldir="${HOME}/mingw/opt" -static-libgcc
-        working-directory: "./openssl-1.1.1j"
+        working-directory: "./openssl-${{ env.OPENSSL_VERSION }}"
 
       - name: Build OpenSSL
         if: steps.cache.outputs.cache-hit != 'true'
         run: make
-        working-directory: "./openssl-1.1.1j/"
+        working-directory: "./openssl-${{ env.OPENSSL_VERSION }}"
 
       - name: Install OpenSSL
         if: steps.cache.outputs.cache-hit != 'true'
         run: make install
-        working-directory: "./openssl-1.1.1j/"
+        working-directory: "./openssl-${{ env.OPENSSL_VERSION }}"
 
       - name: autoreconf pkcs11-helper
         if: steps.cache.outputs.cache-hit != 'true'
         run: autoreconf -iv
-        working-directory: "./pkcs11-helper-pkcs11-helper-1.26"
+        working-directory: "./pkcs11-helper-${{ env.PKCS11_HELPER_VERSION }}"
 
       - name: configure pkcs11-helper
         if: steps.cache.outputs.cache-hit != 'true'
         run: OPENSSL_LIBS="-L${HOME}/mingw/opt/lib -lssl -lcrypto" OPENSSL_CFLAGS=-I$HOME/mingw/opt/include PKG_CONFIG_PATH=${HOME}/mingw/opt/lib/pkgconfig ./configure --host=${CHOST} --program-prefix='' --libdir=${HOME}/mingw/opt/lib --prefix=${HOME}/mingw/opt --build=x86_64-pc-linux-gnu --disable-crypto-engine-gnutls --disable-crypto-engine-nss --disable-crypto-engine-polarssl --disable-crypto-engine-mbedtls
-        working-directory: "./pkcs11-helper-pkcs11-helper-1.26"
+        working-directory: "./pkcs11-helper-${{ env.PKCS11_HELPER_VERSION }}"
 
       - name: build pkcs11-helper
         if: steps.cache.outputs.cache-hit != 'true'
         run: make all
-        working-directory: "./pkcs11-helper-pkcs11-helper-1.26"
+        working-directory: "./pkcs11-helper-${{ env.PKCS11_HELPER_VERSION }}"
 
       - name: install pkcs11-helper
         if: steps.cache.outputs.cache-hit != 'true'
         run: make install
-        working-directory: "./pkcs11-helper-pkcs11-helper-1.26"
+        working-directory: "./pkcs11-helper-${{ env.PKCS11_HELPER_VERSION }}"
 
       - name: Configure lzo
         if: steps.cache.outputs.cache-hit != 'true'
         run: ./configure --host=${CHOST} --program-prefix='' --libdir=${HOME}/mingw/opt/lib --prefix=${HOME}/mingw/opt --build=x86_64-pc-linux-gnu
-        working-directory: "./lzo-2.10"
+        working-directory: "./lzo-${{ env.LZO_VERSION }}"
 
       - name: build lzo
         if: steps.cache.outputs.cache-hit != 'true'
-        working-directory: "./lzo-2.10"
+        working-directory: "./lzo-${{ env.LZO_VERSION }}"
         run: make
 
       - name: install lzo
         if: steps.cache.outputs.cache-hit != 'true'
-        working-directory: "./lzo-2.10"
+        working-directory: "./lzo-${{ env.LZO_VERSION }}"
         run: make install
 
       - name: copy tap-windows.h header
         if: steps.cache.outputs.cache-hit != 'true'
-        run: cp ./tap-windows-9.23.3/include/tap-windows.h ${HOME}/mingw/opt/include/
+        run: cp ./tap-windows-${TAP_WINDOWS_VERSION}/include/tap-windows.h ${HOME}/mingw/opt/include/
 
       - name: configure OpenVPN
         run: PKG_CONFIG_PATH=${HOME}/mingw/opt/lib/pkgconfig DCO_SOURCEDIR=$(realpath ../ovpn-dco-win) LDFLAGS=-L$HOME/mingw/opt/lib CFLAGS=-I$HOME/mingw/opt/include OPENSSL_LIBS="-L${HOME}/opt/lib -lssl -lcrypto" OPENSSL_CFLAGS=-I$HOME/mingw/opt/include PREFIX=$HOME/mingw/opt LZO_CFLAGS=-I$HOME/mingw/opt/include LZO_LIBS="-L${HOME}/mingw/opt/lib -llzo2" ./configure  --host=${CHOST} --disable-lz4 --enable-dco
Signature · 1 line
2.30.2
Acked-by on v2 1/1
#4 lore raw

Applied (changes look reasonable and simplify future version bumps), and verified that everything builds in my GH repo and that it does, indeed, build with pkcs11-helper 1.29.0 (.bz2!) and OpenSSL 1.1.1n.

Your patch has been applied to the master branch.

commit 33abca041519b3f72bb6cc3eea81eb987e72d178

Author: Marc Becker
Date:   Mon Apr 25 23:58:22 2022 +0200
     fix GitHub workflow working directories in MinGW builds

     Signed-off-by: Marc Becker <[email protected]...>
     Acked-by: Gert Doering <[email protected]...>
     Message-Id: <[email protected]...>
     URL: https://www.mail-archive.com/[email protected]/msg24202.html
     Signed-off-by: Gert Doering <[email protected]...>

--
kind regards,

Gert Doering