Skip to contentSkip to conversation

block: Fix some filename generation issues

PATCH Superseded Max Reitz 3 participants 29 messages Jun 21, 2017 – Aug 16, 2017 Block layer

v5 of 13 Superseded Latest is v13 →

lore
Share & tools
lore

Max Reitz

author
#0 lore raw

v5 cover block: Fix some filename generation issues

[If you have read the cover letter in x \in [v2, v4], there is nothing
new here; feel free to skip to the bottom to read the changes from v4.]

There are some issues regarding filename generation right now:

- You always get a JSON filename if you set even a single qcow2-specific runtime options (as long as it does not have a dot in it, which is a bug, too, but here it is working in our favor...). That is not nice and actually breaks the usage of backing files with relative filenames with such qcow2 BDS.

- As hinted above, you cannot use relative backing filenames with BDS that have a JSON filename only, even though qemu might be able to obtain the directory name by walking through the BDS graph to the protocol level.

- Overriding the backing file at runtime should invalidate the filename because it actually changes the BDS's data. Therefore, we need to force a JSON filename in that case, containing the backing file override.

- Much of our code assumes paths never to exceed PATH_MAX in length. This is wrong, at least because of JSON filenames. This should be fixed wherever the opportunity arises.

- If a driver decides to implement bdrv_refresh_filename(), that implementation has to not only refresh the filename (as one would think) but it must also refresh the runtime options (bs->full_open_options). That is stupid. (I'm allowed to say that because I'm to blame for it.)

This series is enclosed by four patches (two at the front, two at the back) that fix more or less general issues. They are included because:
- Patch 1 is required so that in patch 3 it's obvious why we don't need to set backing_overriden there or call bdrv_refresh_filename()
- Patch 2 is already reviewed, so I might just as well keep it.
- Patches 24 and 25 are basically general bug fixes. Their connection to this series is obvious, however, I think, and they depend on the rest of the series, so I decided to just put them in.

Patches 3 and 4 address the third issue above, and patch 23 adds something that's missing from patch 3. It cannot be squashed into patch 3, however, because it depends on functionality introduced by patches 18 to 22.
Consequently, patch 3 introduces a FIXME that is resolved by patch 23.

Patches 5 to 9 address the fourth issue above, and are also necessary preparation for the following patches.

Patches 10 to 16 address the second issue above, patch 17 adds a test case. They implement a bdrv_dirname() function that returns the base directory of a BDS by walking through the BDS graph to the protocol layer and then trying to obtain a path based on that BDS's exact_filename. This obviously fails if exact_filename on the protocol layer is not set.
This behavior can be overriden either by any block driver along the way implementing bdrv_dirname() itself or by the user through the new 'base-directory' node option. This may allow us to resolve relative filenames even if the reference BDS only has a JSON filename.

Patches 18 to 22 address both the first and last issues above. They add a field called "sgfnt_runtime_opts" to the BlockDriver structure. Block drivers may point this to an array containing all of the runtime options they accept that may change their BDS's data (i.e. that are "significant"). bdrv_refresh_filename() will use this list to generate bs->full_open_options itself (with only a little help by the block driver, if necessary, through the .bdrv_gather_child_options() function). This not only simplifies the process significantly, but also results in the default implementation generating JSON filenames only when really necessary.

v5: Rebased on my block branch and addressed Eric's comments on v4
- Patch 1: Rebase conflict (bdrv_set_backing_hd() is now called in mirror_exit() instead of mirror_complete())
- Patch 2: Drop bdrv_refresh_filename() calls in the commit and mirror block drivers' implementations of that very function
- Patch 5: Rebase conflict due to 0d54a6fed3ebaf0e
- Patch 7: Rebase conflict due to 418661e0324c1c41
- Patch 10: Added comment on bdrv_dirname()'s interface [Eric]
- Patch 13: Drop NBD bdrv_dirname() support [Eric]
- Patch 16: More or less contextual rebase conflicts, bumped qemu's version number, removed the "#optional"
- Patch 18: More block drivers to support
- Patch 19:
- Added comment on bdrv_gather_child_options()'s interface
- Fixed implementation for VMDK: We should check that bs->backing is non-NULL before accessing it (and it may be NULL even if bs->backing_overridden is true)
- Patch 21:
- Added comment on bdrv_refresh_filename()'s interface
- Rebase conflicts mostly because of the new qdict_put_*() helpers
- Handle the mirror and commit "block drivers", too

git-backport-diff against v4:

Key:
[----] : patches are identical
[####] : number of functional differences between upstream/downstream patch [down] : patch is downstream-only
The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively

001/25:[0016] [FC] 'block/mirror: Small absolute-paths simplification' 002/25:[0002] [FC] 'block: Use children list in bdrv_refresh_filename' 003/25:[----] [-C] 'block: Add BDS.backing_overridden' 004/25:[----] [-C] 'block: Respect backing bs in bdrv_refresh_filename' 005/25:[0026] [FC] 'block: Make path_combine() return the path' 006/25:[----] [-C] 'block: bdrv_get_full_backing_filename_from_...'s ret. val.' 007/25:[0016] [FC] 'block: bdrv_get_full_backing_filename's ret. val.' 008/25:[----] [--] 'block: Add bdrv_make_absolute_filename()' 009/25:[----] [-C] 'block: Fix bdrv_find_backing_image()' 010/25:[0006] [FC] 'block: Add bdrv_dirname()'
011/25:[----] [-C] 'blkverify: Make bdrv_dirname() return NULL' 012/25:[----] [--] 'quorum: Make bdrv_dirname() return NULL' 013/25:[down] 'block/nbd: Make bdrv_dirname() return NULL' 014/25:[----] [--] 'block/nfs: Implement bdrv_dirname()' 015/25:[----] [--] 'block: Use bdrv_dirname() for relative filenames' 016/25:[0012] [FC] 'block: Add 'base-directory' BDS option' 017/25:[----] [--] 'iotests: Add quorum case to test 110' 018/25:[0074] [FC] 'block: Add sgfnt_runtime_opts to BlockDriver' 019/25:[0014] [FC] 'block: Add BlockDriver.bdrv_gather_child_options' 020/25:[----] [--] 'block: Generically refresh runtime options' 021/25:[0118] [FC] 'block: Purify .bdrv_refresh_filename()' 022/25:[----] [--] 'block: Do not copy exact_filename from format file' 023/25:[----] [-C] 'block: Fix FIXME from "Add BDS.backing_overridden"' 024/25:[----] [--] 'block/curl: Implement bdrv_refresh_filename()' 025/25:[----] [--] 'block/null: Generate filename even with latency-ns'

Max Reitz (25):
block/mirror: Small absolute-paths simplification
block: Use children list in bdrv_refresh_filename
block: Add BDS.backing_overridden
block: Respect backing bs in bdrv_refresh_filename
block: Make path_combine() return the path
block: bdrv_get_full_backing_filename_from_...'s ret. val.
block: bdrv_get_full_backing_filename's ret. val.
block: Add bdrv_make_absolute_filename()
block: Fix bdrv_find_backing_image()
block: Add bdrv_dirname()
blkverify: Make bdrv_dirname() return NULL
quorum: Make bdrv_dirname() return NULL block/nbd: Make bdrv_dirname() return NULL block/nfs: Implement bdrv_dirname()
block: Use bdrv_dirname() for relative filenames
block: Add 'base-directory' BDS option
iotests: Add quorum case to test 110
block: Add sgfnt_runtime_opts to BlockDriver
block: Add BlockDriver.bdrv_gather_child_options
block: Generically refresh runtime options
block: Purify .bdrv_refresh_filename()
block: Do not copy exact_filename from format file
block: Fix FIXME from "Add BDS.backing_overridden" block/curl: Implement bdrv_refresh_filename() block/null: Generate filename even with latency-ns

 qapi/block-core.json          |   9 +
 include/block/block.h         |  15 +-
 include/block/block_int.h     |  36 ++-
 block.c                       | 501 ++++++++++++++++++++++++++++--------------
 block/blkdebug.c              |  58 ++---
 block/blkverify.c             |  29 +--
 block/commit.c                |   3 +-
 block/crypto.c                |   5 +
 block/curl.c                  |  39 ++++
 block/gluster.c               |  19 ++
 block/iscsi.c                 |  18 ++
 block/mirror.c                |  19 +-
 block/nbd.c                   |  46 ++--
 block/nfs.c                   |  46 ++--
 block/null.c                  |  33 ++-
 block/qapi.c                  |  12 +-
 block/quorum.c                |  58 +++--
 block/rbd.c                   |   5 +
 block/replication.c           |   5 +
 block/sheepdog.c              |  12 +
 block/ssh.c                   |   5 +
 block/vmdk.c                  |  24 +-
 block/vpc.c                   |   4 +
 block/vvfat.c                 |   4 +
 block/vxhs.c                  |   8 +
 blockdev.c                    |  16 ++
 tests/qemu-iotests/051.out    |   8 +-
 tests/qemu-iotests/051.pc.out |   8 +-
 tests/qemu-iotests/110        |  51 ++++-
 tests/qemu-iotests/110.out    |  14 +-
 30 files changed, 769 insertions(+), 341 deletions(-)
Signature · 1 line
2.9.4
author
#1 lore raw

PATCH v5 1/25 block/mirror: Small absolute-paths simplification

When invoking drive-mirror in absolute-paths mode, the target's backing BDS is assigned to it in mirror_exit(). The current logic only does so if the target does not have that backing BDS already; but it actually cannot have a backing BDS at all (the BDS is opened with O_NO_BACKING in qmp_drive_mirror()), so just assert that and assign the new backing BDS unconditionally.

---
 block/mirror.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
block/mirror.c +6 -6
index 4618853..db57bee 100644
@@ -529,12 +529,12 @@ static void mirror_exit(BlockJob *job, void *opaque)
                             &error_abort);
     if (s->backing_mode == MIRROR_SOURCE_BACKING_CHAIN) {
         BlockDriverState *backing = s->is_none_mode ? src : s->base;
-        if (backing_bs(target_bs) != backing) {
-            bdrv_set_backing_hd(target_bs, backing, &local_err);
-            if (local_err) {
-                error_report_err(local_err);
-                data->ret = -EPERM;
-            }
+
+        assert(!target_bs->backing);
+        bdrv_set_backing_hd(target_bs, backing, &local_err);
+        if (local_err) {
+            error_report_err(local_err);
+            data->ret = -EPERM;
         }
     }
 
Signature · 1 line
2.9.4
Reviewed-by on v5 1/25
#2 lore raw

Re: [Qemu-devel] [PATCH v5 01/25] block/mirror: Small absolute-paths simplification

Quoted 8 lines · Max Reitz

When invoking drive-mirror in absolute-paths mode, the target's backing BDS is assigned to it in mirror_exit(). The current logic only does so if the target does not have that backing BDS already; but it actually cannot have a backing BDS at all (the BDS is opened with O_NO_BACKING in qmp_drive_mirror()), so just assert that and assign the new backing BDS unconditionally.

Berto

author
#3 lore raw

PATCH v5 2/25 block: Use children list in bdrv_refresh_filename

In reply to Max Reitz

bdrv_refresh_filename() should invoke itself recursively on all children, not just on file.

With that change, we can remove the manual invocations in blkverify, quorum, commit, and mirror.

---
 block.c           | 9 +++++----
 block/blkverify.c | 3 ---
 block/commit.c    | 1 -
 block/mirror.c    | 1 -
 block/quorum.c    | 1 -
 5 files changed, 5 insertions(+), 10 deletions(-)
block.c +5 -4
index fa1d06d..2926f53 100644
@@ -4788,16 +4788,17 @@ static bool append_open_options(QDict *d, BlockDriverState *bs)
 void bdrv_refresh_filename(BlockDriverState *bs)
 {
     BlockDriver *drv = bs->drv;
+    BdrvChild *child;
     QDict *opts;
 
     if (!drv) {
         return;
     }
 
-    /* This BDS's file name will most probably depend on its file's name, so
-     * refresh that first */
-    if (bs->file) {
-        bdrv_refresh_filename(bs->file->bs);
+    /* This BDS's file name may depend on any of its children's file names, so
+     * refresh those first */
+    QLIST_FOREACH(child, &bs->children, next) {
+        bdrv_refresh_filename(child->bs);
     }
 
     if (drv->bdrv_refresh_filename) {
block/blkverify.c +0 -3
index 06369f9..b2ed8cd 100644
@@ -281,9 +281,6 @@ static void blkverify_refresh_filename(BlockDriverState *bs, QDict *options)
 {
     BDRVBlkverifyState *s = bs->opaque;
 
-    /* bs->file->bs has already been refreshed */
-    bdrv_refresh_filename(s->test_file->bs);
-
     if (bs->file->bs->full_open_options
         && s->test_file->bs->full_open_options)
     {
block/commit.c +0 -1
index 8c09c3d..7146e48 100644
@@ -259,7 +259,6 @@ static int64_t coroutine_fn bdrv_commit_top_get_block_status(
 
 static void bdrv_commit_top_refresh_filename(BlockDriverState *bs, QDict *opts)
 {
-    bdrv_refresh_filename(bs->backing->bs);
     pstrcpy(bs->exact_filename, sizeof(bs->exact_filename),
             bs->backing->bs->filename);
 }
block/mirror.c +0 -1
index db57bee..df6c8bb 100644
@@ -1070,7 +1070,6 @@ static int coroutine_fn bdrv_mirror_top_pdiscard(BlockDriverState *bs,
 
 static void bdrv_mirror_top_refresh_filename(BlockDriverState *bs, QDict *opts)
 {
-    bdrv_refresh_filename(bs->backing->bs);
     pstrcpy(bs->exact_filename, sizeof(bs->exact_filename),
             bs->backing->bs->filename);
 }
block/quorum.c +0 -1
index 1b2a8c3..f39b9e5 100644
@@ -1087,7 +1087,6 @@ static void quorum_refresh_filename(BlockDriverState *bs, QDict *options)
     int i;
 
     for (i = 0; i < s->num_children; i++) {
-        bdrv_refresh_filename(s->children[i]->bs);
         if (!s->children[i]->bs->full_open_options) {
             return;
         }
Signature · 1 line
2.9.4
Reviewed-by on v5 2/25
#4 lore raw

Re: [Qemu-devel] [PATCH v5 02/25] block: Use children list in bdrv_refresh_filename

Quoted 7 lines · Max Reitz

bdrv_refresh_filename() should invoke itself recursively on all children, not just on file.

With that change, we can remove the manual invocations in blkverify, quorum, commit, and mirror.

Berto

author
#5 lore raw

PATCH v5 3/25 block: Add BDS.backing_overridden

In reply to Max Reitz

If the backing file is overridden, this most probably does change the guest-visible data of a BDS. Therefore, we will need to consider this in bdrv_refresh_filename().

Adding a new field to the BDS is not nice, but it is very simple and exactly keeps track of whether the backing file has been overridden.

This commit adds a FIXME which will be remedied by a follow-up commit. Until then, the respective piece of code will not result in any behavior that is worse than what we currently have.

---
 include/block/block_int.h |  1 +
 block.c                   | 13 +++++++++++++
 block/mirror.c            |  4 ++++
 blockdev.c                | 16 ++++++++++++++++
 4 files changed, 34 insertions(+)
include/block/block_int.h +1 -0
index 6820027..bedf19b 100644
@@ -547,6 +547,7 @@ struct BlockDriverState {
     char backing_file[PATH_MAX]; /* if non zero, the image is a diff of
                                     this file image */
     char backing_format[16]; /* if non-zero and backing_file exists */
+    bool backing_overridden; /* backing file has been specified by the user */
 
     QDict *full_open_options;
     char exact_filename[PATH_MAX];
block.c +13 -0
index 2926f53..2addec0 100644
@@ -2147,6 +2147,11 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *parent_options,
     reference = qdict_get_try_str(parent_options, bdref_key);
     if (reference || qdict_haskey(options, "file.filename")) {
         backing_filename[0] = '\0';
+
+        /* FIXME: Should also be set to true if @options contains other runtime
+         *        options which control the data that is read from the backing
+         *        BDS */
+        bs->backing_overridden = true;
     } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
         QDECREF(options);
         goto free_exit;
@@ -2346,6 +2351,9 @@ static BlockDriverState *bdrv_append_temp_snapshot(BlockDriverState *bs,
         goto out;
     }
 
+    bs_snapshot->backing_overridden = true;
+    bdrv_refresh_filename(bs_snapshot);
+
 out:
     QDECREF(snapshot_options);
     g_free(tmp_filename);
@@ -2476,6 +2484,7 @@ static BlockDriverState *bdrv_open_inherit(const char *filename,
     backing = qdict_get_try_str(options, "backing");
     if (backing && *backing == '\0') {
         flags |= BDRV_O_NO_BACKING;
+        bs->backing_overridden = true;
         qdict_del(options, "backing");
     }
 
@@ -4799,6 +4808,10 @@ void bdrv_refresh_filename(BlockDriverState *bs)
      * refresh those first */
     QLIST_FOREACH(child, &bs->children, next) {
         bdrv_refresh_filename(child->bs);
+
+        if (child->role == &child_backing && child->bs->backing_overridden) {
+            bs->backing_overridden = true;
+        }
     }
 
     if (drv->bdrv_refresh_filename) {
block/mirror.c +4 -0
index df6c8bb..6ac3956 100644
@@ -536,6 +536,10 @@ static void mirror_exit(BlockJob *job, void *opaque)
             error_report_err(local_err);
             data->ret = -EPERM;
         }
+
+        /* The target image's file already has been created with the backing
+         * file we just set, so there is no need to set backing_overridden or
+         * call bdrv_refresh_filename(). */
     }
 
     if (s->to_replace) {
blockdev.c +16 -0
index 6472548..c15308a 100644
@@ -1787,6 +1787,8 @@ static void external_snapshot_commit(BlkActionState *common)
 {
     ExternalSnapshotState *state =
                              DO_UPCAST(ExternalSnapshotState, common, common);
+    TransactionAction *action = common->action;
+    bool image_was_existing = false;
 
     /* We don't need (or want) to use the transactional
      * bdrv_reopen_multiple() across all the entries at once, because we
@@ -1795,6 +1797,20 @@ static void external_snapshot_commit(BlkActionState *common)
         bdrv_reopen(state->old_bs, state->old_bs->open_flags & ~BDRV_O_RDWR,
                     NULL);
     }
+
+    if (action->type == TRANSACTION_ACTION_KIND_BLOCKDEV_SNAPSHOT_SYNC) {
+        BlockdevSnapshotSync *s = action->u.blockdev_snapshot_sync.data;
+        if (s->has_mode && s->mode == NEW_IMAGE_MODE_EXISTING) {
+            image_was_existing = true;
+        }
+    } else {
+        image_was_existing = true;
+    }
+
+    if (image_was_existing) {
+        state->new_bs->backing_overridden = true;
+        bdrv_refresh_filename(state->new_bs);
+    }
 }
 
 static void external_snapshot_abort(BlkActionState *common)
Signature · 1 line
2.9.4
author
#6 lore raw

PATCH v5 4/25 block: Respect backing bs in bdrv_refresh_filename

In reply to Max Reitz

Basically, bdrv_refresh_filename() should respect all children of a BlockDriverState. However, generally those children are driver-specific, so this function cannot handle the general case. On the other hand, there are only few drivers which use other children than @file and @backing (that being vmdk, quorum, and blkverify).

Most block drivers only use @file and/or @backing (if they use any children at all). Both can be implemented directly in bdrv_refresh_filename.

The user overriding the file's filename is already handled, however, the user overriding the backing file is not. If this is done, opening the BDS with the plain filename of its file will not be correct, so we may not set bs->exact_filename in that case.

iotest 051 contains test cases for overwriting the backing file, and so its output changes with this patch applied (which I consider a good thing).

---
 block.c                       | 12 +++++++++++-
 tests/qemu-iotests/051.out    |  8 ++++----
 tests/qemu-iotests/051.pc.out |  8 ++++----
 3 files changed, 19 insertions(+), 9 deletions(-)
block.c +11 -1
index 2addec0..fd10a16 100644
@@ -4839,6 +4839,7 @@ void bdrv_refresh_filename(BlockDriverState *bs)
 
         opts = qdict_new();
         has_open_options = append_open_options(opts, bs);
+        has_open_options |= bs->backing_overridden;
 
         /* If no specific options have been given for this BDS, the filename of
          * the underlying file should suffice for this one as well */
@@ -4850,11 +4851,20 @@ void bdrv_refresh_filename(BlockDriverState *bs)
          * file BDS. The full options QDict of that file BDS should somehow
          * contain a representation of the filename, therefore the following
          * suffices without querying the (exact_)filename of this BDS. */
-        if (bs->file->bs->full_open_options) {
+        if (bs->file->bs->full_open_options &&
+            (!bs->backing || bs->backing->bs->full_open_options))
+        {
             qdict_put_str(opts, "driver", drv->format_name);
             QINCREF(bs->file->bs->full_open_options);
             qdict_put(opts, "file", bs->file->bs->full_open_options);
 
+            if (bs->backing) {
+                QINCREF(bs->backing->bs->full_open_options);
+                qdict_put(opts, "backing", bs->backing->bs->full_open_options);
+            } else if (bs->backing_overridden && !bs->backing) {
+                qdict_put(opts, "backing", qstring_new());
+            }
+
             bs->full_open_options = opts;
         } else {
             QDECREF(opts);
tests/qemu-iotests/051.out +4 -4
index 4d3b1ff..d38b39f 100644
@@ -59,7 +59,7 @@ QEMU X.Y.Z monitor - type 'help' for more information
 Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig,if=none,id=drive0 -nodefaults
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) info block
-drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.orig"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
     Removable device: not locked, tray closed
     Cache mode:       writeback
     Backing file:     TEST_DIR/t.qcow2.orig (chain depth: 1)
@@ -148,7 +148,7 @@ QEMU_PROG: -drive driver=null-co,cache=invalid_value: invalid cache option
 Testing: -drive file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) info block
-drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
     Removable device: not locked, tray closed
     Cache mode:       writeback
     Backing file:     TEST_DIR/t.qcow2.base (chain depth: 1)
@@ -168,7 +168,7 @@ backing-file: TEST_DIR/t.qcow2.base (file, read-only)
 Testing: -drive file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) info block
-drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
     Removable device: not locked, tray closed
     Cache mode:       writethrough
     Backing file:     TEST_DIR/t.qcow2.base (chain depth: 1)
@@ -188,7 +188,7 @@ backing-file: TEST_DIR/t.qcow2.base (file, read-only)
 Testing: -drive file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) info block
-drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
     Removable device: not locked, tray closed
     Cache mode:       writeback, ignore flushes
     Backing file:     TEST_DIR/t.qcow2.base (chain depth: 1)
tests/qemu-iotests/051.pc.out +4 -4
index 76d7205..9c4b5ea 100644
@@ -59,7 +59,7 @@ QEMU X.Y.Z monitor - type 'help' for more information
 Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig,if=none,id=drive0 -nodefaults
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) info block
-drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.orig"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
     Removable device: not locked, tray closed
     Cache mode:       writeback
     Backing file:     TEST_DIR/t.qcow2.orig (chain depth: 1)
@@ -246,7 +246,7 @@ QEMU_PROG: -drive driver=null-co,cache=invalid_value: invalid cache option
 Testing: -drive file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) info block
-drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
     Removable device: not locked, tray closed
     Cache mode:       writeback
     Backing file:     TEST_DIR/t.qcow2.base (chain depth: 1)
@@ -266,7 +266,7 @@ backing-file: TEST_DIR/t.qcow2.base (file, read-only)
 Testing: -drive file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) info block
-drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
     Removable device: not locked, tray closed
     Cache mode:       writethrough
     Backing file:     TEST_DIR/t.qcow2.base (chain depth: 1)
@@ -286,7 +286,7 @@ backing-file: TEST_DIR/t.qcow2.base (file, read-only)
 Testing: -drive file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) info block
-drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
     Removable device: not locked, tray closed
     Cache mode:       writeback, ignore flushes
     Backing file:     TEST_DIR/t.qcow2.base (chain depth: 1)
Signature · 1 line
2.9.4
author
#7 lore raw

PATCH v5 5/25 block: Make path_combine() return the path

In reply to Max Reitz

Besides being safe for arbitrary path lengths, after some follow-up patches all callers will want a freshly allocated buffer anyway.

In the meantime, path_combine_deprecated() is added which has the same interface as path_combine() had before this patch. All callers to that function will be converted in follow-up patches.

---
 include/block/block.h |  4 +--
 block.c               | 85 ++++++++++++++++++++++++++++-----------------------
 block/vmdk.c          |  3 +-
 3 files changed, 49 insertions(+), 43 deletions(-)
include/block/block.h +1 -3
index 5bebff4..9f89fa7 100644
@@ -501,9 +501,7 @@ void bdrv_get_full_backing_filename_from_filename(const char *backed,
 
 int path_has_protocol(const char *path);
 int path_is_absolute(const char *path);
-void path_combine(char *dest, int dest_size,
-                  const char *base_path,
-                  const char *filename);
+char *path_combine(const char *base_path, const char *filename);
 
 int bdrv_readv_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos);
 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos);
block.c +47 -38

123 lines not on this page · raw message

block/vmdk.c +1 -2
index 55581b0..4389a69 100644
@@ -846,8 +846,7 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
             return -EINVAL;
         }
 
-        extent_path = g_malloc0(PATH_MAX);
-        path_combine(extent_path, PATH_MAX, desc_file_path, fname);
+        extent_path = path_combine(desc_file_path, fname);
 
         ret = snprintf(extent_opt_prefix, 32, "extents.%d", s->num_extents);
         assert(ret < 32);
Signature · 1 line
2.9.4
author
#8 lore raw

PATCH v5 6/25 block: bdrv_get_full_backing_filename_from_...'s ret. val.

In reply to Max Reitz

Make bdrv_get_full_backing_filename_from_filename() return an allocated string instead of placing the result in a caller-provided buffer.

---
 include/block/block.h |  7 +++----
 block.c               | 32 +++++++++++++++++++-------------
 block/vmdk.c          |  8 +++-----
 3 files changed, 25 insertions(+), 22 deletions(-)
include/block/block.h +3 -4
index 9f89fa7..e9df983 100644
@@ -494,10 +494,9 @@ void bdrv_get_backing_filename(BlockDriverState *bs,
                                char *filename, int filename_size);
 void bdrv_get_full_backing_filename(BlockDriverState *bs,
                                     char *dest, size_t sz, Error **errp);
-void bdrv_get_full_backing_filename_from_filename(const char *backed,
-                                                  const char *backing,
-                                                  char *dest, size_t sz,
-                                                  Error **errp);
+char *bdrv_get_full_backing_filename_from_filename(const char *backed,
+                                                   const char *backing,
+                                                   Error **errp);
 
 int path_has_protocol(const char *path);
 int path_is_absolute(const char *path);
block.c +19 -13
index 80e4805..b70a9a8 100644
@@ -287,20 +287,20 @@ int bdrv_set_read_only(BlockDriverState *bs, bool read_only, Error **errp)
     return 0;
 }
 
-void bdrv_get_full_backing_filename_from_filename(const char *backed,
-                                                  const char *backing,
-                                                  char *dest, size_t sz,
-                                                  Error **errp)
+char *bdrv_get_full_backing_filename_from_filename(const char *backed,
+                                                   const char *backing,
+                                                   Error **errp)
 {
     if (backing[0] == '\0' || path_has_protocol(backing) ||
         path_is_absolute(backing))
     {
-        pstrcpy(dest, sz, backing);
+        return g_strdup(backing);
     } else if (backed[0] == '\0' || strstart(backed, "json:", NULL)) {
         error_setg(errp, "Cannot use relative backing file names for '%s'",
                    backed);
+        return NULL;
     } else {
-        path_combine_deprecated(dest, sz, backed, backing);
+        return path_combine(backed, backing);
     }
 }
 
@@ -308,9 +308,15 @@ void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz,
                                     Error **errp)
 {
     char *backed = bs->exact_filename[0] ? bs->exact_filename : bs->filename;
+    char *full_name;
 
-    bdrv_get_full_backing_filename_from_filename(backed, bs->backing_file,
-                                                 dest, sz, errp);
+    full_name = bdrv_get_full_backing_filename_from_filename(backed,
+                                                             bs->backing_file,
+                                                             errp);
+    if (full_name) {
+        pstrcpy(dest, sz, full_name);
+        g_free(full_name);
+    }
 }
 
 void bdrv_register(BlockDriver *bdrv)
@@ -4431,16 +4437,16 @@ void bdrv_img_create(const char *filename, const char *fmt,
     if (size == -1) {
         if (backing_file) {
             BlockDriverState *bs;
-            char *full_backing = g_new0(char, PATH_MAX);
+            char *full_backing;
             int64_t size;
             int back_flags;
             QDict *backing_options = NULL;
 
-            bdrv_get_full_backing_filename_from_filename(filename, backing_file,
-                                                         full_backing, PATH_MAX,
-                                                         &local_err);
+            full_backing =
+                bdrv_get_full_backing_filename_from_filename(filename,
+                                                             backing_file,
+                                                             &local_err);
             if (local_err) {
-                g_free(full_backing);
                 goto out;
             }
 
block/vmdk.c +3 -5
index 4389a69..4e92ce4 100644
@@ -1983,12 +1983,10 @@ static int vmdk_create(const char *filename, QemuOpts *opts, Error **errp)
     }
     if (backing_file) {
         BlockBackend *blk;
-        char *full_backing = g_new0(char, PATH_MAX);
-        bdrv_get_full_backing_filename_from_filename(filename, backing_file,
-                                                     full_backing, PATH_MAX,
-                                                     &local_err);
+        char *full_backing =
+            bdrv_get_full_backing_filename_from_filename(filename, backing_file,
+                                                         &local_err);
         if (local_err) {
-            g_free(full_backing);
             error_propagate(errp, local_err);
             ret = -ENOENT;
             goto exit;
Signature · 1 line
2.9.4
author
#9 lore raw

PATCH v5 7/25 block: bdrv_get_full_backing_filename's ret. val.

In reply to Max Reitz

Make bdrv_get_full_backing_filename() return an allocated string instead of placing the result in a caller-provided buffer.

---
 include/block/block.h |  3 +--
 block.c               | 42 +++++++++++++++++-------------------------
 block/qapi.c          | 12 ++----------
 3 files changed, 20 insertions(+), 37 deletions(-)
include/block/block.h +1 -2
index e9df983..dfae9b4 100644
@@ -492,8 +492,7 @@ void bdrv_round_to_clusters(BlockDriverState *bs,
 const char *bdrv_get_encrypted_filename(BlockDriverState *bs);
 void bdrv_get_backing_filename(BlockDriverState *bs,
                                char *filename, int filename_size);
-void bdrv_get_full_backing_filename(BlockDriverState *bs,
-                                    char *dest, size_t sz, Error **errp);
+char *bdrv_get_full_backing_filename(BlockDriverState *bs, Error **errp);
 char *bdrv_get_full_backing_filename_from_filename(const char *backed,
                                                    const char *backing,
                                                    Error **errp);
block.c +17 -25

95 lines not on this page · raw message

block/qapi.c +2 -10
index a40922e..96c0533 100644
@@ -265,18 +265,10 @@ void bdrv_query_image_info(BlockDriverState *bs,
 
     backing_filename = bs->backing_file;
     if (backing_filename[0] != '\0') {
-        char *backing_filename2 = g_malloc0(PATH_MAX);
+        char *backing_filename2;
         info->backing_filename = g_strdup(backing_filename);
         info->has_backing_filename = true;
-        bdrv_get_full_backing_filename(bs, backing_filename2, PATH_MAX, &err);
-        if (err) {
-            /* Can't reconstruct the full backing filename, so we must omit
-             * this field and apply a Best Effort to this query. */
-            g_free(backing_filename2);
-            backing_filename2 = NULL;
-            error_free(err);
-            err = NULL;
-        }
+        backing_filename2 = bdrv_get_full_backing_filename(bs, NULL);
 
         /* Always report the full_backing_filename if present, even if it's the
          * same as backing_filename. That they are same is useful info. */
Signature · 1 line
2.9.4
author
#10 lore raw

PATCH v5 8/25 block: Add bdrv_make_absolute_filename()

In reply to Max Reitz

This is a general function for making a filename that is relative to a certain BDS absolute.

It calls bdrv_get_full_backing_filename_from_filename() for now, but that will be changed in a follow-up patch.

---
 block.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
block.c +11 -4
index 14beb6b..6f19816 100644
@@ -304,15 +304,22 @@ char *bdrv_get_full_backing_filename_from_filename(const char *backed,
     }
 }
 
-char *bdrv_get_full_backing_filename(BlockDriverState *bs, Error **errp)
+static char *bdrv_make_absolute_filename(BlockDriverState *relative_to,
+                                         const char *filename, Error **errp)
 {
-    char *backed = bs->exact_filename[0] ? bs->exact_filename : bs->filename;
+    char *bs_filename = relative_to->exact_filename[0]
+                        ? relative_to->exact_filename
+                        : relative_to->filename;
 
-    return bdrv_get_full_backing_filename_from_filename(backed,
-                                                        bs->backing_file,
+    return bdrv_get_full_backing_filename_from_filename(bs_filename, filename,
                                                         errp);
 }
 
+char *bdrv_get_full_backing_filename(BlockDriverState *bs, Error **errp)
+{
+    return bdrv_make_absolute_filename(bs, bs->backing_file, errp);
+}
+
 void bdrv_register(BlockDriver *bdrv)
 {
     QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
Signature · 1 line
2.9.4
author
#11 lore raw

PATCH v5 9/25 block: Fix bdrv_find_backing_image()

In reply to Max Reitz

bdrv_find_backing_image() should use bdrv_get_full_backing_filename() or bdrv_make_absolute_filename() instead of trying to do what those functions do by itself.

path_combine_deprecated() can now be dropped, so let's do that.

---
 block.c | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)
block.c +13 -15
index 6f19816..108da69 100644
@@ -197,15 +197,6 @@ char *path_combine(const char *base_path, const char *filename)
     return result;
 }
 
-static void path_combine_deprecated(char *dest, int dest_size,
-                                    const char *base_path,
-                                    const char *filename)
-{
-    char *combined = path_combine(base_path, filename);
-    pstrcpy(dest, dest_size, combined);
-    g_free(combined);
-}
-
 /*
  * Helper function for bdrv_parse_filename() implementations to remove optional
  * protocol prefixes (especially "file:") from a filename and for putting the
@@ -3950,7 +3941,6 @@ BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
 
     filename_full     = g_malloc(PATH_MAX);
     backing_file_full = g_malloc(PATH_MAX);
-    filename_tmp      = g_malloc(PATH_MAX);
 
     is_protocol = path_has_protocol(backing_file);
 
@@ -3979,22 +3969,31 @@ BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
         } else {
             /* If not an absolute filename path, make it relative to the current
              * image's filename path */
-            path_combine_deprecated(filename_tmp, PATH_MAX, curr_bs->filename,
-                                    backing_file);
+            filename_tmp = bdrv_make_absolute_filename(curr_bs, backing_file,
+                                                       NULL);
+            if (!filename_tmp) {
+                continue;
+            }
 
             /* We are going to compare absolute pathnames */
             if (!realpath(filename_tmp, filename_full)) {
+                g_free(filename_tmp);
                 continue;
             }
+            g_free(filename_tmp);
 
             /* We need to make sure the backing filename we are comparing against
              * is relative to the current image filename (or absolute) */
-            path_combine_deprecated(filename_tmp, PATH_MAX, curr_bs->filename,
-                                    curr_bs->backing_file);
+            filename_tmp = bdrv_get_full_backing_filename(curr_bs, NULL);
+            if (!filename_tmp) {
+                continue;
+            }
 
             if (!realpath(filename_tmp, backing_file_full)) {
+                g_free(filename_tmp);
                 continue;
             }
+            g_free(filename_tmp);
 
             if (strcmp(backing_file_full, filename_full) == 0) {
                 retval = curr_bs->backing->bs;
@@ -4005,7 +4004,6 @@ BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
 
     g_free(filename_full);
     g_free(backing_file_full);
-    g_free(filename_tmp);
     return retval;
 }
 
Signature · 1 line
2.9.4
author
#12 lore raw

PATCH v5 10/25 block: Add bdrv_dirname()

In reply to Max Reitz

This function may be implemented by block drivers to derive a directory name from a BDS. Concatenating this g_free()-able string with a relative filename must result in a valid (not necessarily existing) filename, so this is a function that should generally be not implemented by format drivers, because this is protocol-specific.

If a BDS's driver does not implement this function, bdrv_dirname() will fall through to the BDS's file if it exists. If it does not, the exact_filename field will be used to generate a directory name.

---
 include/block/block.h     |  1 +
 include/block/block_int.h |  7 +++++++
 block.c                   | 26 ++++++++++++++++++++++++++
 3 files changed, 34 insertions(+)
include/block/block.h +1 -0
index dfae9b4..8327e4a 100644
@@ -496,6 +496,7 @@ char *bdrv_get_full_backing_filename(BlockDriverState *bs, Error **errp);
 char *bdrv_get_full_backing_filename_from_filename(const char *backed,
                                                    const char *backing,
                                                    Error **errp);
+char *bdrv_dirname(BlockDriverState *bs, Error **errp);
 
 int path_has_protocol(const char *path);
 int path_is_absolute(const char *path);
include/block/block_int.h +7 -0
index bedf19b..61e7d7a 100644
@@ -131,6 +131,13 @@ struct BlockDriver {
 
     void (*bdrv_refresh_filename)(BlockDriverState *bs, QDict *options);
 
+    /*
+     * Returns an allocated string which is the directory name of this BDS: It
+     * will be used to make relative filenames absolute by prepending this
+     * function's return value to them.
+     */
+    char *(*bdrv_dirname)(BlockDriverState *bs, Error **errp);
+
     /* aio */
     BlockAIOCB *(*bdrv_aio_readv)(BlockDriverState *bs,
         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
block.c +26 -0
index 108da69..0838c12 100644
@@ -4917,6 +4917,32 @@ void bdrv_refresh_filename(BlockDriverState *bs)
     }
 }
 
+char *bdrv_dirname(BlockDriverState *bs, Error **errp)
+{
+    BlockDriver *drv = bs->drv;
+
+    if (!drv) {
+        error_setg(errp, "Node '%s' is ejected", bs->node_name);
+        return NULL;
+    }
+
+    if (drv->bdrv_dirname) {
+        return drv->bdrv_dirname(bs, errp);
+    }
+
+    if (bs->file) {
+        return bdrv_dirname(bs->file->bs, errp);
+    }
+
+    if (bs->exact_filename[0] != '\0') {
+        return path_combine(bs->exact_filename, "");
+    }
+
+    error_setg(errp, "Cannot generate a base directory for %s nodes",
+               drv->format_name);
+    return NULL;
+}
+
 /*
  * Hot add/remove a BDS's child. So the user can take a child offline when
  * it is broken and take a new child online
Signature · 1 line
2.9.4
author
#13 lore raw

PATCH v5 11/25 blkverify: Make bdrv_dirname() return NULL

In reply to Max Reitz

blkverify's BDSs have a file BDS, but we do not want this to be preferred over the raw node. There is no way to decide between the two (and not really a reason to, either), so just return NULL in blkverify's implementation of bdrv_dirname().

---
 block/blkverify.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
block/blkverify.c +10 -0
index b2ed8cd..d5233ee 100644
@@ -309,6 +309,15 @@ static void blkverify_refresh_filename(BlockDriverState *bs, QDict *options)
     }
 }
 
+static char *blkverify_dirname(BlockDriverState *bs, Error **errp)
+{
+    /* In general, there are two BDSs with different dirnames below this one;
+     * so there is no unique dirname we could return (unless both are equal by
+     * chance). Therefore, to be consistent, just always return NULL. */
+    error_setg(errp, "Cannot generate a base directory for blkverify nodes");
+    return NULL;
+}
+
 static BlockDriver bdrv_blkverify = {
     .format_name                      = "blkverify",
     .protocol_name                    = "blkverify",
@@ -320,6 +329,7 @@ static BlockDriver bdrv_blkverify = {
     .bdrv_child_perm                  = bdrv_filter_default_perms,
     .bdrv_getlength                   = blkverify_getlength,
     .bdrv_refresh_filename            = blkverify_refresh_filename,
+    .bdrv_dirname                     = blkverify_dirname,
 
     .bdrv_co_preadv                   = blkverify_co_preadv,
     .bdrv_co_pwritev                  = blkverify_co_pwritev,
Signature · 1 line
2.9.4
author
#14 lore raw

PATCH v5 12/25 quorum: Make bdrv_dirname() return NULL

In reply to Max Reitz

While the common implementation for bdrv_dirname() should return NULL for quorum BDSs already (because they do not have a file node and their exact_filename field should be empty), there is no reason not to make that explicit.

---
 block/quorum.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
block/quorum.c +11 -0
index f39b9e5..1e40b9e 100644
@@ -1108,6 +1108,16 @@ static void quorum_refresh_filename(BlockDriverState *bs, QDict *options)
     bs->full_open_options = opts;
 }
 
+static char *quorum_dirname(BlockDriverState *bs, Error **errp)
+{
+    /* In general, there are multiple BDSs with different dirnames below this
+     * one; so there is no unique dirname we could return (unless all are equal
+     * by chance, or there is only one). Therefore, to be consistent, just
+     * always return NULL. */
+    error_setg(errp, "Cannot generate a base directory for quorum nodes");
+    return NULL;
+}
+
 static BlockDriver bdrv_quorum = {
     .format_name                        = "quorum",
     .protocol_name                      = "quorum",
@@ -1117,6 +1127,7 @@ static BlockDriver bdrv_quorum = {
     .bdrv_file_open                     = quorum_open,
     .bdrv_close                         = quorum_close,
     .bdrv_refresh_filename              = quorum_refresh_filename,
+    .bdrv_dirname                       = quorum_dirname,
 
     .bdrv_co_flush_to_disk              = quorum_co_flush,
 
Signature · 1 line
2.9.4
author
#15 lore raw

PATCH v5 13/25 block/nbd: Make bdrv_dirname() return NULL

In reply to Max Reitz

The generic bdrv_dirname() implementation would be able to generate some form of directory name for many NBD nodes, but it would be always wrong. Therefore, we have to explicitly make it an error (until NBD has some form of specification for export paths, if it ever will).

---
 block/nbd.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
block/nbd.c +13 -0
index f91ac63..f896fc4 100644
@@ -558,6 +558,16 @@ static void nbd_refresh_filename(BlockDriverState *bs, QDict *options)
     bs->full_open_options = opts;
 }
 
+static char *nbd_dirname(BlockDriverState *bs, Error **errp)
+{
+    /* The generic bdrv_dirname() implementation is able to work out some
+     * directory name for NBD nodes, but that would be wrong. So far there is no
+     * specification for how "export paths" would work, so NBD does not have
+     * directory names. */
+    error_setg(errp, "Cannot generate a base directory for NBD nodes");
+    return NULL;
+}
+
 static BlockDriver bdrv_nbd = {
     .format_name                = "nbd",
     .protocol_name              = "nbd",
@@ -575,6 +585,7 @@ static BlockDriver bdrv_nbd = {
     .bdrv_detach_aio_context    = nbd_detach_aio_context,
     .bdrv_attach_aio_context    = nbd_attach_aio_context,
     .bdrv_refresh_filename      = nbd_refresh_filename,
+    .bdrv_dirname               = nbd_dirname,
 };
 
 static BlockDriver bdrv_nbd_tcp = {
@@ -594,6 +605,7 @@ static BlockDriver bdrv_nbd_tcp = {
     .bdrv_detach_aio_context    = nbd_detach_aio_context,
     .bdrv_attach_aio_context    = nbd_attach_aio_context,
     .bdrv_refresh_filename      = nbd_refresh_filename,
+    .bdrv_dirname               = nbd_dirname,
 };
 
 static BlockDriver bdrv_nbd_unix = {
@@ -613,6 +625,7 @@ static BlockDriver bdrv_nbd_unix = {
     .bdrv_detach_aio_context    = nbd_detach_aio_context,
     .bdrv_attach_aio_context    = nbd_attach_aio_context,
     .bdrv_refresh_filename      = nbd_refresh_filename,
+    .bdrv_dirname               = nbd_dirname,
 };
 
 static void bdrv_nbd_init(void)
Signature · 1 line
2.9.4
author
#16 lore raw

PATCH v5 14/25 block/nfs: Implement bdrv_dirname()

In reply to Max Reitz

While the basic idea is obvious and could be handled by the default bdrv_dirname() implementation, we cannot generate a directory name if the gid or uid are set, so we have to explicitly return NULL in those cases.

---
 block/nfs.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
block/nfs.c +14 -0
index fee1f87..976d96f 100644
@@ -862,6 +862,19 @@ static void nfs_refresh_filename(BlockDriverState *bs, QDict *options)
     bs->full_open_options = opts;
 }
 
+static char *nfs_dirname(BlockDriverState *bs, Error **errp)
+{
+    NFSClient *client = bs->opaque;
+
+    if (client->uid || client->gid) {
+        error_setg(errp, "Cannot generate a base directory for NBD node '%s'",
+                   bs->filename);
+        return NULL;
+    }
+
+    return g_strdup_printf("nfs://%s%s/", client->server->host, client->path);
+}
+
 #ifdef LIBNFS_FEATURE_PAGECACHE
 static void nfs_invalidate_cache(BlockDriverState *bs,
                                  Error **errp)
@@ -895,6 +908,7 @@ static BlockDriver bdrv_nfs = {
     .bdrv_detach_aio_context        = nfs_detach_aio_context,
     .bdrv_attach_aio_context        = nfs_attach_aio_context,
     .bdrv_refresh_filename          = nfs_refresh_filename,
+    .bdrv_dirname                   = nfs_dirname,
 
 #ifdef LIBNFS_FEATURE_PAGECACHE
     .bdrv_invalidate_cache          = nfs_invalidate_cache,
Signature · 1 line
2.9.4
author
#17 lore raw

PATCH v5 15/25 block: Use bdrv_dirname() for relative filenames

In reply to Max Reitz

bdrv_get_full_backing_filename_from_filename() breaks down when it comes to JSON filenames. Using bdrv_dirname() as the basis is better because since we have BDS, we can descend through the BDS tree to the protocol layer, which gives us a greater probability of finding a non-JSON name; also, bdrv_dirname() is more correct as it allows block drivers to override the generation of that directory name in a protocol-specific way.

We still need to keep bdrv_get_full_backing_filename_from_filename(), though, because it has valid callers which need it during image creation when no BDS is available yet.

This makes a test case in qemu-iotest 110, which was supposed to fail, work. That is actually good, but we need to change the reference output (and the comment in 110) accordingly.

---
 block.c                    | 20 +++++++++++++++-----
 tests/qemu-iotests/110     |  3 ++-
 tests/qemu-iotests/110.out |  2 +-
 3 files changed, 18 insertions(+), 7 deletions(-)
block.c +15 -5
index 0838c12..a5dd6bb 100644
@@ -298,12 +298,22 @@ char *bdrv_get_full_backing_filename_from_filename(const char *backed,
 static char *bdrv_make_absolute_filename(BlockDriverState *relative_to,
                                          const char *filename, Error **errp)
 {
-    char *bs_filename = relative_to->exact_filename[0]
-                        ? relative_to->exact_filename
-                        : relative_to->filename;
+    char *dir, *full_name;
 
-    return bdrv_get_full_backing_filename_from_filename(bs_filename, filename,
-                                                        errp);
+    if (filename[0] == '\0' || path_has_protocol(filename) ||
+        path_is_absolute(filename))
+    {
+        return g_strdup(filename);
+    }
+
+    dir = bdrv_dirname(relative_to, errp);
+    if (!dir) {
+        return NULL;
+    }
+
+    full_name = g_strconcat(dir, filename, NULL);
+    g_free(dir);
+    return full_name;
 }
 
 char *bdrv_get_full_backing_filename(BlockDriverState *bs, Error **errp)
tests/qemu-iotests/110 +2 -1
index 9de7369..ba1b3c6 100755
@@ -61,7 +61,8 @@ echo '=== Non-reconstructable filename ==='
 echo
 
 # Across blkdebug without a config file, you cannot reconstruct filenames, so
-# qemu is incapable of knowing the directory of the top image
+# qemu is incapable of knowing the directory of the top image from the filename
+# alone. However, using bdrv_dirname(), it should still work.
 TEST_IMG="json:{
     'driver': '$IMGFMT',
     'file': {
tests/qemu-iotests/110.out +1 -1
index b3584ff..5370bc1 100644
@@ -14,7 +14,7 @@ backing file: t.IMGFMT.base (actual path: TEST_DIR/t.IMGFMT.base)
 image: json:{"driver": "IMGFMT", "file": {"set-state.0.event": "read_aio", "image": {"driver": "file", "filename": "TEST_DIR/t.IMGFMT"}, "driver": "blkdebug", "set-state.0.new_state": 42}}
 file format: IMGFMT
 virtual size: 64M (67108864 bytes)
-backing file: t.IMGFMT.base (cannot determine actual path)
+backing file: t.IMGFMT.base (actual path: TEST_DIR/t.IMGFMT.base)
 
 === Backing name is always relative to the backed image ===
 
Signature · 1 line
2.9.4
author
#18 lore raw

PATCH v5 16/25 block: Add 'base-directory' BDS option

In reply to Max Reitz

Using this option, one can directly override what bdrv_dirname() will return. This is useful if one uses e.g. qcow2 on top of quorum (with only protocol BDSs under the quorum BDS) and wants to be able to use relative backing filenames.

---
 qapi/block-core.json      |  9 +++++++++
 include/block/block_int.h |  2 ++
 block.c                   | 14 ++++++++++++++
 3 files changed, 25 insertions(+)
qapi/block-core.json +9 -0
index f85c223..4090c62 100644
@@ -2940,6 +2940,14 @@
 #                 (default: off)
 # @force-share:   force share all permission on added nodes.
 #                 Requires read-only=true. (Since 2.10)
+# @base-directory May be specified for any node. Normally, whenever a filename
+#                 is specified which is supposed to be relative to this node
+#                 (such as relative backing filenames), the base directory to be
+#                 used is the directory the image file of this node is in, which
+#                 is simply prepended to the relative filename. Using this
+#                 option, the string which is prepended (i.e. the base
+#                 directory) can be overridden.
+#                 (Since 2.10)
 #
 # Remaining options are determined by the block driver.
 #
@@ -2948,6 +2956,7 @@
 { 'union': 'BlockdevOptions',
   'base': { 'driver': 'BlockdevDriver',
             '*node-name': 'str',
+            '*base-directory': 'str',
             '*discard': 'BlockdevDiscardOptions',
             '*cache': 'BlockdevCacheOptions',
             '*read-only': 'bool',
include/block/block_int.h +2 -0
index 61e7d7a..8a7fc2d 100644
@@ -559,6 +559,8 @@ struct BlockDriverState {
     QDict *full_open_options;
     char exact_filename[PATH_MAX];
 
+    char *dirname;
+
     BdrvChild *backing;
     BdrvChild *file;
 
block.c +14 -0
index a5dd6bb..8e03cca 100644
@@ -1233,6 +1233,12 @@ QemuOptsList bdrv_runtime_opts = {
             .type = QEMU_OPT_BOOL,
             .help = "always accept other writers (default: off)",
         },
+        {
+            .name = "base-directory",
+            .type = QEMU_OPT_STRING,
+            .help = "String to prepend to filenames relative to this BDS for "
+                    "making them absolute",
+        },
         { /* end of list */ }
     },
 };
@@ -1305,6 +1311,8 @@ static int bdrv_open_common(BlockDriverState *bs, BlockBackend *file,
     trace_bdrv_open_common(bs, filename ?: "", bs->open_flags,
                            drv->format_name);
 
+    bs->dirname = g_strdup(qemu_opt_get(opts, "base-directory"));
+
     bs->read_only = !(bs->open_flags & BDRV_O_RDWR);
 
     if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
@@ -3249,6 +3257,8 @@ static void bdrv_delete(BlockDriverState *bs)
 
     bdrv_close(bs);
 
+    g_free(bs->dirname);
+
     /* remove from list, if necessary */
     if (bs->node_name[0] != '\0') {
         QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
@@ -4931,6 +4941,10 @@ char *bdrv_dirname(BlockDriverState *bs, Error **errp)
 {
     BlockDriver *drv = bs->drv;
 
+    if (bs->dirname) {
+        return g_strdup(bs->dirname);
+    }
+
     if (!drv) {
         error_setg(errp, "Node '%s' is ejected", bs->node_name);
         return NULL;
Signature · 1 line
2.9.4
author
#19 lore raw

PATCH v5 17/25 iotests: Add quorum case to test 110

In reply to Max Reitz

Test 110 tests relative backing filenames for complex BDS trees. Add quorum as an example that can never work automatically (without special-casing if all child nodes have the same base directory), and an example on how to make it work manually (using the base-directory option).

---
 tests/qemu-iotests/110     | 48 ++++++++++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/110.out | 12 ++++++++++++
 2 files changed, 60 insertions(+)
tests/qemu-iotests/110 +48 -0
index ba1b3c6..d96b656 100755
@@ -30,6 +30,7 @@ status=1	# failure is the default!
 _cleanup()
 {
 	_cleanup_test_img
+        rm -f "$TEST_IMG.copy"
 }
 trap "_cleanup; exit \$status" 0 1 2 3 15
 
@@ -87,6 +88,53 @@ echo
 # omit the image size; it should work anyway
 _make_test_img -b "$TEST_IMG_REL.base"
 
+echo
+echo '=== Nodes without a common directory ==='
+echo
+
+cp "$TEST_IMG" "$TEST_IMG.copy"
+
+# Should inform us that the actual path of the backing file cannot be determined
+TEST_IMG="json:{
+    'driver': '$IMGFMT',
+    'file': {
+        'driver': 'quorum',
+        'vote-threshold': 1,
+        'children': [
+            {
+                'driver': 'file',
+                'filename': '$TEST_IMG'
+            },
+            {
+                'driver': 'file',
+                'filename': '$TEST_IMG.copy'
+            }
+        ]
+    }
+}" _img_info | _filter_img_info
+
+echo
+
+# Should work fine
+TEST_IMG="json:{
+    'driver': '$IMGFMT',
+    'file': {
+        'driver': 'quorum',
+        'base-directory': '$TEST_DIR/',
+        'vote-threshold': 1,
+        'children': [
+            {
+                'driver': 'file',
+                'filename': '$TEST_IMG'
+            },
+            {
+                'driver': 'file',
+                'filename': '$TEST_IMG.copy'
+            }
+        ]
+    }
+}" _img_info | _filter_img_info
+
 
 # success, all done
 echo '*** done'
tests/qemu-iotests/110.out +12 -0
index 5370bc1..e1845d8 100644
@@ -19,4 +19,16 @@ backing file: t.IMGFMT.base (actual path: TEST_DIR/t.IMGFMT.base)
 === Backing name is always relative to the backed image ===
 
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=t.IMGFMT.base
+
+=== Nodes without a common directory ===
+
+image: json:{"driver": "IMGFMT", "file": {"children": [{"driver": "file", "filename": "TEST_DIR/t.IMGFMT"}, {"driver": "file", "filename": "TEST_DIR/t.IMGFMT.copy"}], "driver": "quorum", "blkverify": false, "rewrite-corrupted": false, "vote-threshold": 1}}
+file format: IMGFMT
+virtual size: 64M (67108864 bytes)
+backing file: t.IMGFMT.base (cannot determine actual path)
+
+image: json:{"driver": "IMGFMT", "file": {"children": [{"driver": "file", "filename": "TEST_DIR/t.IMGFMT"}, {"driver": "file", "filename": "TEST_DIR/t.IMGFMT.copy"}], "driver": "quorum", "blkverify": false, "rewrite-corrupted": false, "vote-threshold": 1}}
+file format: IMGFMT
+virtual size: 64M (67108864 bytes)
+backing file: t.IMGFMT.base (actual path: TEST_DIR/t.IMGFMT.base)
 *** done
Signature · 1 line
2.9.4
author
#20 lore raw

PATCH v5 18/25 block: Add sgfnt_runtime_opts to BlockDriver

In reply to Max Reitz

This new field can be set by block drivers to list the runtime options they accept that may influence the contents of the respective BDS. As of a follow-up patch, this list will be used by the common bdrv_refresh_filename() implementation to decide which options to put into BDS.full_open_options (and consequently whether a JSON filename has to be created), thus freeing the drivers of having to implement that logic themselves.

Additionally, this patch adds the field to all of the block drivers that need it and sets it accordingly.

---
 include/block/block_int.h |  7 +++++++
 block/blkdebug.c          |  6 ++++++
 block/crypto.c            |  5 +++++
 block/curl.c              | 21 +++++++++++++++++++++
 block/gluster.c           | 19 +++++++++++++++++++
 block/iscsi.c             | 18 ++++++++++++++++++
 block/nbd.c               | 14 ++++++++++++++
 block/nfs.c               |  4 ++++
 block/null.c              |  9 +++++++++
 block/quorum.c            |  8 ++++++++
 block/rbd.c               |  5 +++++
 block/replication.c       |  5 +++++
 block/sheepdog.c          | 12 ++++++++++++
 block/ssh.c               |  5 +++++
 block/vpc.c               |  4 ++++
 block/vvfat.c             |  4 ++++
 block/vxhs.c              |  8 ++++++++
 17 files changed, 154 insertions(+)
include/block/block_int.h +7 -0
index 8a7fc2d..1ec1d70 100644
@@ -388,6 +388,13 @@ struct BlockDriver {
                              uint64_t *nperm, uint64_t *nshared);
 
     QLIST_ENTRY(BlockDriver) list;
+
+    /* Pointer to a NULL-terminated array of names of significant options that
+     * can be specified for bdrv_open(). A significant option is one that
+     * changes the data of a BDS.
+     * If this pointer is NULL, the array is considered empty.
+     * "filename" and "driver" are always considered significant. */
+    const char *const *sgfnt_runtime_opts;
 };
 
 typedef struct BlockLimits {
block/blkdebug.c +6 -0
index f508ede..06c7924 100644
@@ -923,6 +923,12 @@ static BlockDriver bdrv_blkdebug = {
                                 = blkdebug_debug_remove_breakpoint,
     .bdrv_debug_resume          = blkdebug_debug_resume,
     .bdrv_debug_is_suspended    = blkdebug_debug_is_suspended,
+
+    .sgfnt_runtime_opts         = (const char *const[]) { "config",
+                                                          "inject-error.",
+                                                          "set-state.",
+                                                          "suspend.",
+                                                          NULL },
 };
 
 static void bdrv_blkdebug_init(void)
block/crypto.c +5 -0
index 10e5ddc..295b83e 100644
@@ -639,6 +639,11 @@ BlockDriver bdrv_crypto_luks = {
     .bdrv_getlength     = block_crypto_getlength,
     .bdrv_get_info      = block_crypto_get_info_luks,
     .bdrv_get_specific_info = block_crypto_get_specific_info_luks,
+
+    .sgfnt_runtime_opts = (const char *const[]) {
+                              BLOCK_CRYPTO_OPT_LUKS_KEY_SECRET,
+                              NULL
+                          },
 };
 
 static void block_crypto_init(void)
block/curl.c +21 -0
index 2a244e2..11318a9 100644
@@ -957,6 +957,19 @@ static int64_t curl_getlength(BlockDriverState *bs)
     return s->len;
 }
 
+static const char *const curl_sgfnt_runtime_opts[] = {
+    CURL_BLOCK_OPT_URL,
+    CURL_BLOCK_OPT_SSLVERIFY,
+    CURL_BLOCK_OPT_COOKIE,
+    CURL_BLOCK_OPT_COOKIE_SECRET,
+    CURL_BLOCK_OPT_USERNAME,
+    CURL_BLOCK_OPT_PASSWORD_SECRET,
+    CURL_BLOCK_OPT_PROXY_USERNAME,
+    CURL_BLOCK_OPT_PROXY_PASSWORD_SECRET,
+
+    NULL
+};
+
 static BlockDriver bdrv_http = {
     .format_name                = "http",
     .protocol_name              = "http",
@@ -971,6 +984,8 @@ static BlockDriver bdrv_http = {
 
     .bdrv_detach_aio_context    = curl_detach_aio_context,
     .bdrv_attach_aio_context    = curl_attach_aio_context,
+
+    .sgfnt_runtime_opts         = curl_sgfnt_runtime_opts,
 };
 
 static BlockDriver bdrv_https = {
@@ -987,6 +1002,8 @@ static BlockDriver bdrv_https = {
 
     .bdrv_detach_aio_context    = curl_detach_aio_context,
     .bdrv_attach_aio_context    = curl_attach_aio_context,
+
+    .sgfnt_runtime_opts         = curl_sgfnt_runtime_opts,
 };
 
 static BlockDriver bdrv_ftp = {
@@ -1003,6 +1020,8 @@ static BlockDriver bdrv_ftp = {
 
     .bdrv_detach_aio_context    = curl_detach_aio_context,
     .bdrv_attach_aio_context    = curl_attach_aio_context,
+
+    .sgfnt_runtime_opts         = curl_sgfnt_runtime_opts,
 };
 
 static BlockDriver bdrv_ftps = {
@@ -1019,6 +1038,8 @@ static BlockDriver bdrv_ftps = {
 
     .bdrv_detach_aio_context    = curl_detach_aio_context,
     .bdrv_attach_aio_context    = curl_attach_aio_context,
+
+    .sgfnt_runtime_opts         = curl_sgfnt_runtime_opts,
 };
 
 static void curl_block_init(void)
block/gluster.c +19 -0
index addceed..2bf4290 100644
@@ -1412,6 +1412,21 @@ static int64_t coroutine_fn qemu_gluster_co_get_block_status(
 }
 
 
+static const char *const gluster_sgfnt_open_opts[] = {
+    GLUSTER_OPT_VOLUME,
+    GLUSTER_OPT_PATH,
+    GLUSTER_OPT_TYPE,
+    GLUSTER_OPT_SERVER_PATTERN,
+    GLUSTER_OPT_HOST,
+    GLUSTER_OPT_PORT,
+    GLUSTER_OPT_TO,
+    GLUSTER_OPT_IPV4,
+    GLUSTER_OPT_IPV6,
+    GLUSTER_OPT_SOCKET,
+
+    NULL
+};
+
 static BlockDriver bdrv_gluster = {
     .format_name                  = "gluster",
     .protocol_name                = "gluster",
@@ -1438,6 +1453,7 @@ static BlockDriver bdrv_gluster = {
 #endif
     .bdrv_co_get_block_status     = qemu_gluster_co_get_block_status,
     .create_opts                  = &qemu_gluster_create_opts,
+    .sgfnt_runtime_opts           = gluster_sgfnt_open_opts,
 };
 
 static BlockDriver bdrv_gluster_tcp = {
@@ -1466,6 +1482,7 @@ static BlockDriver bdrv_gluster_tcp = {
 #endif
     .bdrv_co_get_block_status     = qemu_gluster_co_get_block_status,
     .create_opts                  = &qemu_gluster_create_opts,
+    .sgfnt_runtime_opts           = gluster_sgfnt_open_opts,
 };
 
 static BlockDriver bdrv_gluster_unix = {
@@ -1494,6 +1511,7 @@ static BlockDriver bdrv_gluster_unix = {
 #endif
     .bdrv_co_get_block_status     = qemu_gluster_co_get_block_status,
     .create_opts                  = &qemu_gluster_create_opts,
+    .sgfnt_runtime_opts           = gluster_sgfnt_open_opts,
 };
 
 /* rdma is deprecated (actually never supported for volfile fetch).
@@ -1528,6 +1546,7 @@ static BlockDriver bdrv_gluster_rdma = {
 #endif
     .bdrv_co_get_block_status     = qemu_gluster_co_get_block_status,
     .create_opts                  = &qemu_gluster_create_opts,
+    .sgfnt_runtime_opts           = gluster_sgfnt_open_opts,
 };
 
 static void bdrv_gluster_init(void)
block/iscsi.c +18 -0
index 54067e2..bd5962e 100644
@@ -2187,6 +2187,20 @@ static QemuOptsList iscsi_create_opts = {
     }
 };
 
+static const char *const iscsi_sgfnt_runtime_opts[] = {
+    "transport",
+    "portal",
+    "target",
+    "user",
+    "password",
+    "password-secret",
+    "lun",
+    "initiator-name",
+    "header-digest",
+
+    NULL
+};
+
 static BlockDriver bdrv_iscsi = {
     .format_name     = "iscsi",
     .protocol_name   = "iscsi",
@@ -2219,6 +2233,8 @@ static BlockDriver bdrv_iscsi = {
 
     .bdrv_detach_aio_context = iscsi_detach_aio_context,
     .bdrv_attach_aio_context = iscsi_attach_aio_context,
+
+    .sgfnt_runtime_opts = iscsi_sgfnt_runtime_opts,
 };
 
 #if LIBISCSI_API_VERSION >= (20160603)
@@ -2254,6 +2270,8 @@ static BlockDriver bdrv_iser = {
 
     .bdrv_detach_aio_context = iscsi_detach_aio_context,
     .bdrv_attach_aio_context = iscsi_attach_aio_context,
+
+    .sgfnt_runtime_opts = iscsi_sgfnt_runtime_opts,
 };
 #endif
 
block/nbd.c +14 -0
index f896fc4..7c10ede 100644
@@ -568,6 +568,17 @@ static char *nbd_dirname(BlockDriverState *bs, Error **errp)
     return NULL;
 }
 
+static const char *const nbd_sgfnt_runtime_opts[] = {
+    "path",
+    "host",
+    "port",
+    "export",
+    "tls-creds",
+    "server.",
+
+    NULL
+};
+
 static BlockDriver bdrv_nbd = {
     .format_name                = "nbd",
     .protocol_name              = "nbd",
@@ -586,6 +597,7 @@ static BlockDriver bdrv_nbd = {
     .bdrv_attach_aio_context    = nbd_attach_aio_context,
     .bdrv_refresh_filename      = nbd_refresh_filename,
     .bdrv_dirname               = nbd_dirname,
+    .sgfnt_runtime_opts         = nbd_sgfnt_runtime_opts,
 };
 
 static BlockDriver bdrv_nbd_tcp = {
@@ -606,6 +618,7 @@ static BlockDriver bdrv_nbd_tcp = {
     .bdrv_attach_aio_context    = nbd_attach_aio_context,
     .bdrv_refresh_filename      = nbd_refresh_filename,
     .bdrv_dirname               = nbd_dirname,
+    .sgfnt_runtime_opts         = nbd_sgfnt_runtime_opts,
 };
 
 static BlockDriver bdrv_nbd_unix = {
@@ -626,6 +639,7 @@ static BlockDriver bdrv_nbd_unix = {
     .bdrv_attach_aio_context    = nbd_attach_aio_context,
     .bdrv_refresh_filename      = nbd_refresh_filename,
     .bdrv_dirname               = nbd_dirname,
+    .sgfnt_runtime_opts         = nbd_sgfnt_runtime_opts,
 };
 
 static void bdrv_nbd_init(void)
block/nfs.c +4 -0
index 976d96f..b7fa1a3 100644
@@ -910,6 +910,10 @@ static BlockDriver bdrv_nfs = {
     .bdrv_refresh_filename          = nfs_refresh_filename,
     .bdrv_dirname                   = nfs_dirname,
 
+    .sgfnt_runtime_opts             = (const char *const[]) { "path", "uid",
+                                                              "gid", "server.",
+                                                              NULL },
+
 #ifdef LIBNFS_FEATURE_PAGECACHE
     .bdrv_invalidate_cache          = nfs_invalidate_cache,
 #endif
block/null.c +9 -0
index 876f909..7d99552 100644
@@ -236,6 +236,13 @@ static void null_refresh_filename(BlockDriverState *bs, QDict *opts)
     bs->full_open_options = opts;
 }
 
+static const char *const null_sgfnt_runtime_opts[] = {
+    BLOCK_OPT_SIZE,
+    NULL_OPT_ZEROES,
+
+    NULL
+};
+
 static BlockDriver bdrv_null_co = {
     .format_name            = "null-co",
     .protocol_name          = "null-co",
@@ -253,6 +260,7 @@ static BlockDriver bdrv_null_co = {
     .bdrv_co_get_block_status   = null_co_get_block_status,
 
     .bdrv_refresh_filename  = null_refresh_filename,
+    .sgfnt_runtime_opts     = null_sgfnt_runtime_opts,
 };
 
 static BlockDriver bdrv_null_aio = {
@@ -272,6 +280,7 @@ static BlockDriver bdrv_null_aio = {
     .bdrv_co_get_block_status   = null_co_get_block_status,
 
     .bdrv_refresh_filename  = null_refresh_filename,
+    .sgfnt_runtime_opts     = null_sgfnt_runtime_opts,
 };
 
 static void bdrv_null_init(void)
block/quorum.c +8 -0
index 1e40b9e..768dcf3 100644
@@ -1143,6 +1143,14 @@ static BlockDriver bdrv_quorum = {
 
     .is_filter                          = true,
     .bdrv_recurse_is_first_non_filter   = quorum_recurse_is_first_non_filter,
+
+    .sgfnt_runtime_opts                 = (const char *const[]) {
+                                              QUORUM_OPT_VOTE_THRESHOLD,
+                                              QUORUM_OPT_BLKVERIFY,
+                                              QUORUM_OPT_REWRITE,
+                                              QUORUM_OPT_READ_PATTERN,
+                                              NULL
+                                          },
 };
 
 static void bdrv_quorum_init(void)
block/rbd.c +5 -0
index 9da02cd..1e29215 100644
@@ -1144,6 +1144,11 @@ static BlockDriver bdrv_rbd = {
 #ifdef LIBRBD_SUPPORTS_INVALIDATE
     .bdrv_invalidate_cache  = qemu_rbd_invalidate_cache,
 #endif
+
+    .sgfnt_runtime_opts     = (const char *const[]) { "pool", "image", "conf",
+                                                      "snapshot", "user",
+                                                      "server.",
+                                                      "password-secret", NULL },
 };
 
 static void bdrv_rbd_init(void)
block/replication.c +5 -0
index 3885f04..3a46485 100644
@@ -682,6 +682,11 @@ BlockDriver bdrv_replication = {
     .bdrv_recurse_is_first_non_filter = replication_recurse_is_first_non_filter,
 
     .has_variable_length        = true,
+    .sgfnt_runtime_opts         = (const char *const[]) {
+                                      REPLICATION_MODE,
+                                      REPLICATION_TOP_ID,
+                                      NULL
+                                  },
 };
 
 static void bdrv_replication_init(void)
block/sheepdog.c +12 -0
index 2ae04b7..18830fd 100644
@@ -3053,6 +3053,15 @@ static QemuOptsList sd_create_opts = {
     }
 };
 
+static const char *const sd_sgfnt_runtime_opts[] = {
+    "vdi",
+    "snap-id",
+    "tag",
+    "server.",
+
+    NULL
+};
+
 static BlockDriver bdrv_sheepdog = {
     .format_name    = "sheepdog",
     .protocol_name  = "sheepdog",
@@ -3087,6 +3096,7 @@ static BlockDriver bdrv_sheepdog = {
     .bdrv_attach_aio_context = sd_attach_aio_context,
 
     .create_opts    = &sd_create_opts,
+    .sgfnt_runtime_opts = sd_sgfnt_runtime_opts,
 };
 
 static BlockDriver bdrv_sheepdog_tcp = {
@@ -3123,6 +3133,7 @@ static BlockDriver bdrv_sheepdog_tcp = {
     .bdrv_attach_aio_context = sd_attach_aio_context,
 
     .create_opts    = &sd_create_opts,
+    .sgfnt_runtime_opts = sd_sgfnt_runtime_opts,
 };
 
 static BlockDriver bdrv_sheepdog_unix = {
@@ -3159,6 +3170,7 @@ static BlockDriver bdrv_sheepdog_unix = {
     .bdrv_attach_aio_context = sd_attach_aio_context,
 
     .create_opts    = &sd_create_opts,
+    .sgfnt_runtime_opts = sd_sgfnt_runtime_opts,
 };
 
 static void bdrv_sheepdog_init(void)
block/ssh.c +5 -0
index 27f06ec..14345bb 100644
@@ -1200,6 +1200,11 @@ static BlockDriver bdrv_ssh = {
     .bdrv_getlength               = ssh_getlength,
     .bdrv_co_flush_to_disk        = ssh_co_flush,
     .create_opts                  = &ssh_create_opts,
+    .sgfnt_runtime_opts           = (const char *const[]) {
+                                        "host", "port", "path", "user",
+                                        "host_key_check", "server.",
+                                        NULL
+                                    },
 };
 
 static void bdrv_ssh_init(void)
block/vpc.c +4 -0
index 4240ba9..e9fa9f6 100644
@@ -1080,6 +1080,10 @@ static BlockDriver bdrv_vpc = {
 
     .create_opts            = &vpc_create_opts,
     .bdrv_has_zero_init     = vpc_has_zero_init,
+    .sgfnt_runtime_opts     = (const char *const[]) {
+                                  VPC_OPT_SIZE_CALC,
+                                  NULL
+                              },
 };
 
 static void bdrv_vpc_init(void)
block/vvfat.c +4 -0
index 426ca70..d384c1b 100644
@@ -3130,6 +3130,10 @@ static BlockDriver bdrv_vvfat = {
     .bdrv_co_preadv         = vvfat_co_preadv,
     .bdrv_co_pwritev        = vvfat_co_pwritev,
     .bdrv_co_get_block_status = vvfat_co_get_block_status,
+
+    .sgfnt_runtime_opts     = (const char *const[]) { "dir", "fat-type",
+                                                      "floppy", "label", "rw",
+                                                      NULL },
 };
 
 static void bdrv_vvfat_init(void)
block/vxhs.c +8 -0
index 75cc6c8..08cdc3b 100644
@@ -565,6 +565,14 @@ static BlockDriver bdrv_vxhs = {
     .bdrv_getlength               = vxhs_getlength,
     .bdrv_aio_readv               = vxhs_aio_readv,
     .bdrv_aio_writev              = vxhs_aio_writev,
+    .sgfnt_runtime_opts           = (const char *const[]) {
+                                        VXHS_OPT_VDISK_ID,
+                                        "tls-creds",
+                                        VXHS_OPT_HOST,
+                                        VXHS_OPT_PORT,
+                                        VXHS_OPT_SERVER".",
+                                        NULL
+                                    },
 };
 
 static void bdrv_vxhs_init(void)
Signature · 1 line
2.9.4
author
#21 lore raw

PATCH v5 19/25 block: Add BlockDriver.bdrv_gather_child_options

In reply to Max Reitz

Some follow-up patches will rework the way bs->full_open_options is refreshed in bdrv_refresh_filename(). The new implementation will remove the need for the block drivers' bdrv_refresh_filename() implementations to set bs->full_open_options; instead, it will be generic and use static information from each block driver.

However, by implementing bdrv_gather_child_options(), block drivers will still be able to override the way the full_open_options of their children are incorporated into their own.

We need to implement this function for VMDK because we have to prevent the generic implementation from gathering the options of all children:
It is not possible to specify options for the extents through the runtime options.

For quorum, the child names that would be used by the generic implementation and the ones that we actually want to use differ. See quorum_gather_child_options() for more information.

---
 include/block/block_int.h | 13 +++++++++++++
 block/quorum.c            | 30 ++++++++++++++++++++++++++++++
 block/vmdk.c              | 13 +++++++++++++
 3 files changed, 56 insertions(+)
include/block/block_int.h +13 -0
index 1ec1d70..ec37ab3 100644
@@ -132,6 +132,19 @@ struct BlockDriver {
     void (*bdrv_refresh_filename)(BlockDriverState *bs, QDict *options);
 
     /*
+     * Gathers the open options for all children into @target. A simple format
+     * driver (without backing file support) might implement this function like
+     * this:
+     *
+     *     QINCREF(bs->file->bs->full_open_options);
+     *     qdict_put(target, "file", bs->file->bs->full_open_options);
+     *
+     * If not specified, the generic implementation will simply put all
+     * children's options under their respective name.
+     */
+    void (*bdrv_gather_child_options)(BlockDriverState *bs, QDict *target);
+
+    /*
      * Returns an allocated string which is the directory name of this BDS: It
      * will be used to make relative filenames absolute by prepending this
      * function's return value to them.
block/quorum.c +30 -0
index 768dcf3..a2d6c32 100644
@@ -1108,6 +1108,35 @@ static void quorum_refresh_filename(BlockDriverState *bs, QDict *options)
     bs->full_open_options = opts;
 }
 
+static void quorum_gather_child_options(BlockDriverState *bs, QDict *target)
+{
+    BDRVQuorumState *s = bs->opaque;
+    QList *children_list;
+    int i;
+
+    /* The generic implementation for gathering child options in
+     * bdrv_refresh_filename() would use the names of the children as specified
+     * for bdrv_open_child() or bdrv_attach_child(), which is "children.%u" with
+     * %u being a value (s->next_child_index) that is incremented each time a
+     * new child is added (and never decremented). Since children can be deleted
+     * at runtime, there may be gaps in that enumeration. When creating a new
+     * quorum BDS and specifying the children for it through runtime options,
+     * the enumeration used there may not have any gaps, though.
+     *
+     * Therefore, we have to create a new gap-less enumeration here (which we
+     * can achieve by simply putting all of the children's full_open_options
+     * into a QList).
+     */
+
+    children_list = qlist_new();
+    qdict_put(target, "children", children_list);
+
+    for (i = 0; i < s->num_children; i++) {
+        QINCREF(s->children[i]->bs->full_open_options);
+        qlist_append(children_list, s->children[i]->bs->full_open_options);
+    }
+}
+
 static char *quorum_dirname(BlockDriverState *bs, Error **errp)
 {
     /* In general, there are multiple BDSs with different dirnames below this
@@ -1127,6 +1156,7 @@ static BlockDriver bdrv_quorum = {
     .bdrv_file_open                     = quorum_open,
     .bdrv_close                         = quorum_close,
     .bdrv_refresh_filename              = quorum_refresh_filename,
+    .bdrv_gather_child_options          = quorum_gather_child_options,
     .bdrv_dirname                       = quorum_dirname,
 
     .bdrv_co_flush_to_disk              = quorum_co_flush,
block/vmdk.c +13 -0
index 4e92ce4..2bd064b 100644
@@ -2295,6 +2295,18 @@ static int vmdk_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
     return 0;
 }
 
+static void vmdk_gather_child_options(BlockDriverState *bs, QDict *target)
+{
+    /* No children but file and backing can be explicitly specified */
+    QINCREF(bs->file->bs->full_open_options);
+    qdict_put(target, "file", bs->file->bs->full_open_options);
+
+    if (bs->backing && bs->backing_overridden) {
+        QINCREF(bs->backing->bs->full_open_options);
+        qdict_put(target, "backing", bs->backing->bs->full_open_options);
+    }
+}
+
 static QemuOptsList vmdk_create_opts = {
     .name = "vmdk-create-opts",
     .head = QTAILQ_HEAD_INITIALIZER(vmdk_create_opts.head),
@@ -2365,6 +2377,7 @@ static BlockDriver bdrv_vmdk = {
     .bdrv_get_specific_info       = vmdk_get_specific_info,
     .bdrv_refresh_limits          = vmdk_refresh_limits,
     .bdrv_get_info                = vmdk_get_info,
+    .bdrv_gather_child_options    = vmdk_gather_child_options,
 
     .supports_backing             = true,
     .create_opts                  = &vmdk_create_opts,
Signature · 1 line
2.9.4
author
#22 lore raw

PATCH v5 20/25 block: Generically refresh runtime options

In reply to Max Reitz

Instead of having every block driver which implements bdrv_refresh_filename() copy all of the significant runtime options over to bs->full_open_options, implement this process generically in bdrv_refresh_filename().

This patch only adds this new generic implementation, it does not remove the old functionality. This is done in a follow-up patch.

With this patch, some superfluous information (that should never have been there) may be removed from some JSON filenames, as can be seen in the change to iotest 110's reference output.

---
 block.c                    | 116 ++++++++++++++++++++++++++++++++++++++++++++-
 tests/qemu-iotests/110.out |   4 +-
 2 files changed, 117 insertions(+), 3 deletions(-)
block.c +115 -1
index 8e03cca..af5d1ef 100644
@@ -4773,6 +4773,92 @@ out:
     return to_replace_bs;
 }
 
+/**
+ * Iterates through the list of runtime option keys that are said to be
+ * "significant" for a BDS. An option is called "significant" if it changes a
+ * BDS's data. For example, the null block driver's "size" and "read-zeroes"
+ * options are significant, but its "latency-ns" option is not.
+ *
+ * If a key returned by this function ends with a dot, all options starting with
+ * that prefix are significant.
+ */
+static const char *const *significant_options(BlockDriverState *bs,
+                                              const char *const *curopt)
+{
+    static const char *const global_options[] = {
+        "driver", "filename", "base-directory", NULL
+    };
+
+    if (!curopt) {
+        return &global_options[0];
+    }
+
+    curopt++;
+    if (curopt == &global_options[ARRAY_SIZE(global_options) - 1] && bs->drv) {
+        curopt = bs->drv->sgfnt_runtime_opts;
+    }
+
+    return (curopt && *curopt) ? curopt : NULL;
+}
+
+/**
+ * Copies all significant runtime options from bs->options to the given QDict.
+ * The set of significant option keys is determined by invoking
+ * significant_options().
+ *
+ * Returns true iff any significant option was present in bs->options (and thus
+ * copied to the target QDict) with the exception of "filename" and "driver".
+ * The caller is expected to use this value to decide whether the existence of
+ * significant options prevents the generation of a plain filename.
+ */
+static bool append_significant_runtime_options(QDict *d, BlockDriverState *bs)
+{
+    bool found_any = false;
+    const char *const *option_name = NULL;
+
+    if (!bs->drv) {
+        return false;
+    }
+
+    while ((option_name = significant_options(bs, option_name))) {
+        bool option_given = false;
+
+        assert(strlen(*option_name) > 0);
+        if ((*option_name)[strlen(*option_name) - 1] != '.') {
+            QObject *entry = qdict_get(bs->options, *option_name);
+            if (!entry) {
+                continue;
+            }
+
+            qobject_incref(entry);
+            qdict_put_obj(d, *option_name, entry);
+            option_given = true;
+        } else {
+            const QDictEntry *entry;
+            for (entry = qdict_first(bs->options); entry;
+                 entry = qdict_next(bs->options, entry))
+            {
+                if (strstart(qdict_entry_key(entry), *option_name, NULL)) {
+                    qobject_incref(qdict_entry_value(entry));
+                    qdict_put_obj(d, qdict_entry_key(entry),
+                                  qdict_entry_value(entry));
+                    option_given = true;
+                }
+            }
+        }
+
+        /* While "driver" and "filename" need to be included in a JSON filename,
+         * their existence does not prohibit generation of a plain filename. */
+        if (!found_any && option_given &&
+            strcmp(*option_name, "driver") && strcmp(*option_name, "filename"))
+        {
+            found_any = true;
+        }
+    }
+
+    return found_any;
+}
+
 static bool append_open_options(QDict *d, BlockDriverState *bs)
 {
     const QDictEntry *entry;
@@ -4927,9 +5013,37 @@ void bdrv_refresh_filename(BlockDriverState *bs)
         bs->full_open_options = opts;
     }
 
+    /* Gather the options QDict */
+    opts = qdict_new();
+    append_significant_runtime_options(opts, bs);
+
+    if (drv->bdrv_gather_child_options) {
+        /* Some block drivers may not want to present all of their children's
+         * options, or name them differently from BdrvChild.name */
+        drv->bdrv_gather_child_options(bs, opts);
+    } else {
+        QLIST_FOREACH(child, &bs->children, next) {
+            if (child->role == &child_backing && !bs->backing_overridden) {
+                /* We can skip the backing BDS if it has not been overridden */
+                continue;
+            }
+
+            QINCREF(child->bs->full_open_options);
+            qdict_put(opts, child->name, child->bs->full_open_options);
+        }
+
+        if (bs->backing_overridden && !bs->backing) {
+            /* Force no backing file */
+            qdict_put(opts, "backing", qstring_new());
+        }
+    }
+
+    QDECREF(bs->full_open_options);
+    bs->full_open_options = opts;
+
     if (bs->exact_filename[0]) {
         pstrcpy(bs->filename, sizeof(bs->filename), bs->exact_filename);
-    } else if (bs->full_open_options) {
+    } else {
         QString *json = qobject_to_json(QOBJECT(bs->full_open_options));
         snprintf(bs->filename, sizeof(bs->filename), "json:%s",
                  qstring_get_str(json));
tests/qemu-iotests/110.out +2 -2
index e1845d8..7eb199d 100644
@@ -22,12 +22,12 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=t.IMGFMT.b
 
 === Nodes without a common directory ===
 
-image: json:{"driver": "IMGFMT", "file": {"children": [{"driver": "file", "filename": "TEST_DIR/t.IMGFMT"}, {"driver": "file", "filename": "TEST_DIR/t.IMGFMT.copy"}], "driver": "quorum", "blkverify": false, "rewrite-corrupted": false, "vote-threshold": 1}}
+image: json:{"driver": "IMGFMT", "file": {"children": [{"driver": "file", "filename": "TEST_DIR/t.IMGFMT"}, {"driver": "file", "filename": "TEST_DIR/t.IMGFMT.copy"}], "driver": "quorum", "vote-threshold": 1}}
 file format: IMGFMT
 virtual size: 64M (67108864 bytes)
 backing file: t.IMGFMT.base (cannot determine actual path)
 
-image: json:{"driver": "IMGFMT", "file": {"children": [{"driver": "file", "filename": "TEST_DIR/t.IMGFMT"}, {"driver": "file", "filename": "TEST_DIR/t.IMGFMT.copy"}], "driver": "quorum", "blkverify": false, "rewrite-corrupted": false, "vote-threshold": 1}}
+image: json:{"driver": "IMGFMT", "file": {"children": [{"driver": "file", "filename": "TEST_DIR/t.IMGFMT"}, {"driver": "file", "filename": "TEST_DIR/t.IMGFMT.copy"}], "driver": "quorum", "base-directory": "TEST_DIR/", "vote-threshold": 1}}
 file format: IMGFMT
 virtual size: 64M (67108864 bytes)
 backing file: t.IMGFMT.base (actual path: TEST_DIR/t.IMGFMT.base)
Signature · 1 line
2.9.4
author
#23 lore raw

PATCH v5 21/25 block: Purify .bdrv_refresh_filename()

In reply to Max Reitz

Currently, BlockDriver.bdrv_refresh_filename() is supposed to both refresh the filename (BDS.exact_filename) and set BDS.full_open_options. Now that we have generic code in the central bdrv_refresh_filename() for creating BDS.full_open_options, we can drop the latter part from all BlockDriver.bdrv_refresh_filename() implementations.

This also means that we can drop all of the existing default code for this from the global bdrv_refresh_filename() itself.

Furthermore, we now have to call BlockDriver.bdrv_refresh_filename() after having set BDS.full_open_options, because the block driver's implementation should now be allowed to depend on BDS.full_open_options being set correctly.

Finally, with this patch we can drop the @options parameter from BlockDriver.bdrv_refresh_filename(); also, add a comment on this function's purpose in block/block_int.h while touching its interface.

---
 include/block/block_int.h |   6 +-
 block.c                   | 145 +++++++---------------------------------------
 block/blkdebug.c          |  52 ++++++-----------
 block/blkverify.c         |  16 +----
 block/commit.c            |   2 +-
 block/mirror.c            |   2 +-
 block/nbd.c               |  23 +-------
 block/nfs.c               |  36 +-----------
 block/null.c              |  23 +++++---
 block/quorum.c            |  30 ----------
 10 files changed, 63 insertions(+), 272 deletions(-)
include/block/block_int.h +5 -1
index ec37ab3..5283509 100644
@@ -129,7 +129,11 @@ struct BlockDriver {
     int (*bdrv_set_key)(BlockDriverState *bs, const char *key);
     int (*bdrv_make_empty)(BlockDriverState *bs);
 
-    void (*bdrv_refresh_filename)(BlockDriverState *bs, QDict *options);
+    /*
+     * Refreshes the bs->exact_filename field. If that is impossible,
+     * bs->exact_filename has to be left empty.
+     */
+    void (*bdrv_refresh_filename)(BlockDriverState *bs);
 
     /*
      * Gathers the open options for all children into @target. A simple format
block.c +22 -123

171 lines not on this page · raw message

block/blkdebug.c +17 -35

69 lines not on this page · raw message

block/blkverify.c +1 -15
index d5233ee..7da2e08 100644
@@ -277,24 +277,10 @@ static bool blkverify_recurse_is_first_non_filter(BlockDriverState *bs,
     return bdrv_recurse_is_first_non_filter(s->test_file->bs, candidate);
 }
 
-static void blkverify_refresh_filename(BlockDriverState *bs, QDict *options)
+static void blkverify_refresh_filename(BlockDriverState *bs)
 {
     BDRVBlkverifyState *s = bs->opaque;
 
-    if (bs->file->bs->full_open_options
-        && s->test_file->bs->full_open_options)
-    {
-        QDict *opts = qdict_new();
-        qdict_put_str(opts, "driver", "blkverify");
-
-        QINCREF(bs->file->bs->full_open_options);
-        qdict_put(opts, "raw", bs->file->bs->full_open_options);
-        QINCREF(s->test_file->bs->full_open_options);
-        qdict_put(opts, "test", s->test_file->bs->full_open_options);
-
-        bs->full_open_options = opts;
-    }
-
     if (bs->file->bs->exact_filename[0]
         && s->test_file->bs->exact_filename[0])
     {
block/commit.c +1 -1
index 7146e48..c621c06 100644
@@ -257,7 +257,7 @@ static int64_t coroutine_fn bdrv_commit_top_get_block_status(
            (sector_num << BDRV_SECTOR_BITS);
 }
 
-static void bdrv_commit_top_refresh_filename(BlockDriverState *bs, QDict *opts)
+static void bdrv_commit_top_refresh_filename(BlockDriverState *bs)
 {
     pstrcpy(bs->exact_filename, sizeof(bs->exact_filename),
             bs->backing->bs->filename);
block/mirror.c +1 -1
index 6ac3956..4bde18f 100644
@@ -1072,7 +1072,7 @@ static int coroutine_fn bdrv_mirror_top_pdiscard(BlockDriverState *bs,
     return bdrv_co_pdiscard(bs->backing->bs, offset, bytes);
 }
 
-static void bdrv_mirror_top_refresh_filename(BlockDriverState *bs, QDict *opts)
+static void bdrv_mirror_top_refresh_filename(BlockDriverState *bs)
 {
     pstrcpy(bs->exact_filename, sizeof(bs->exact_filename),
             bs->backing->bs->filename);
block/nbd.c +1 -22
index 7c10ede..8312aac 100644
@@ -507,12 +507,9 @@ static void nbd_attach_aio_context(BlockDriverState *bs,
     nbd_client_attach_aio_context(bs, new_context);
 }
 
-static void nbd_refresh_filename(BlockDriverState *bs, QDict *options)
+static void nbd_refresh_filename(BlockDriverState *bs)
 {
     BDRVNBDState *s = bs->opaque;
-    QDict *opts = qdict_new();
-    QObject *saddr_qdict;
-    Visitor *ov;
     const char *host = NULL, *port = NULL, *path = NULL;
 
     if (s->saddr->type == SOCKET_ADDRESS_TYPE_INET) {
@@ -525,8 +522,6 @@ static void nbd_refresh_filename(BlockDriverState *bs, QDict *options)
         path = s->saddr->u.q_unix.path;
     } /* else can't represent as pseudo-filename */
 
-    qdict_put_str(opts, "driver", "nbd");
-
     if (path && s->export) {
         snprintf(bs->exact_filename, sizeof(bs->exact_filename),
                  "nbd+unix:///%s?socket=%s", s->export, path);
@@ -540,22 +535,6 @@ static void nbd_refresh_filename(BlockDriverState *bs, QDict *options)
         snprintf(bs->exact_filename, sizeof(bs->exact_filename),
                  "nbd://%s:%s", host, port);
     }
-
-    ov = qobject_output_visitor_new(&saddr_qdict);
-    visit_type_SocketAddress(ov, NULL, &s->saddr, &error_abort);
-    visit_complete(ov, &saddr_qdict);
-    visit_free(ov);
-    qdict_put_obj(opts, "server", saddr_qdict);
-
-    if (s->export) {
-        qdict_put_str(opts, "export", s->export);
-    }
-    if (s->tlscredsid) {
-        qdict_put_str(opts, "tls-creds", s->tlscredsid);
-    }
-
-    qdict_flatten(opts);
-    bs->full_open_options = opts;
 }
 
 static char *nbd_dirname(BlockDriverState *bs, Error **errp)
block/nfs.c +1 -35
index b7fa1a3..ad49fe2 100644
@@ -806,14 +806,9 @@ static int nfs_reopen_prepare(BDRVReopenState *state,
     return 0;
 }
 
-static void nfs_refresh_filename(BlockDriverState *bs, QDict *options)
+static void nfs_refresh_filename(BlockDriverState *bs)
 {
     NFSClient *client = bs->opaque;
-    QDict *opts = qdict_new();
-    QObject *server_qdict;
-    Visitor *ov;
-
-    qdict_put_str(opts, "driver", "nfs");
 
     if (client->uid && !client->gid) {
         snprintf(bs->exact_filename, sizeof(bs->exact_filename),
@@ -831,35 +826,6 @@ static void nfs_refresh_filename(BlockDriverState *bs, QDict *options)
         snprintf(bs->exact_filename, sizeof(bs->exact_filename),
                  "nfs://%s%s", client->server->host, client->path);
     }
-
-    ov = qobject_output_visitor_new(&server_qdict);
-    visit_type_NFSServer(ov, NULL, &client->server, &error_abort);
-    visit_complete(ov, &server_qdict);
-    qdict_put_obj(opts, "server", server_qdict);
-    qdict_put_str(opts, "path", client->path);
-
-    if (client->uid) {
-        qdict_put_int(opts, "user", client->uid);
-    }
-    if (client->gid) {
-        qdict_put_int(opts, "group", client->gid);
-    }
-    if (client->tcp_syncnt) {
-        qdict_put_int(opts, "tcp-syn-cnt", client->tcp_syncnt);
-    }
-    if (client->readahead) {
-        qdict_put_int(opts, "readahead-size", client->readahead);
-    }
-    if (client->pagecache) {
-        qdict_put_int(opts, "page-cache-size", client->pagecache);
-    }
-    if (client->debug) {
-        qdict_put_int(opts, "debug", client->debug);
-    }
-
-    visit_free(ov);
-    qdict_flatten(opts);
-    bs->full_open_options = opts;
 }
 
 static char *nfs_dirname(BlockDriverState *bs, Error **errp)
block/null.c +14 -9
index 7d99552..fb03fb9 100644
@@ -222,18 +222,23 @@ static int64_t coroutine_fn null_co_get_block_status(BlockDriverState *bs,
     }
 }
 
-static void null_refresh_filename(BlockDriverState *bs, QDict *opts)
+static void null_refresh_filename(BlockDriverState *bs)
 {
-    QINCREF(opts);
-    qdict_del(opts, "filename");
-
-    if (!qdict_size(opts)) {
-        snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s://",
-                 bs->drv->format_name);
+    const QDictEntry *e;
+
+    for (e = qdict_first(bs->full_open_options); e;
+         e = qdict_next(bs->full_open_options, e))
+    {
+        /* These options can be ignored */
+        if (strcmp(qdict_entry_key(e), "filename") &&
+            strcmp(qdict_entry_key(e), "driver"))
+        {
+            return;
+        }
     }
 
-    qdict_put_str(opts, "driver", bs->drv->format_name);
-    bs->full_open_options = opts;
+    snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s://",
+             bs->drv->format_name);
 }
 
 static const char *const null_sgfnt_runtime_opts[] = {
block/quorum.c +0 -30
index a2d6c32..430d89d 100644
@@ -1079,35 +1079,6 @@ static void quorum_del_child(BlockDriverState *bs, BdrvChild *child,
     bdrv_drained_end(bs);
 }
 
-static void quorum_refresh_filename(BlockDriverState *bs, QDict *options)
-{
-    BDRVQuorumState *s = bs->opaque;
-    QDict *opts;
-    QList *children;
-    int i;
-
-    for (i = 0; i < s->num_children; i++) {
-        if (!s->children[i]->bs->full_open_options) {
-            return;
-        }
-    }
-
-    children = qlist_new();
-    for (i = 0; i < s->num_children; i++) {
-        QINCREF(s->children[i]->bs->full_open_options);
-        qlist_append(children, s->children[i]->bs->full_open_options);
-    }
-
-    opts = qdict_new();
-    qdict_put_str(opts, "driver", "quorum");
-    qdict_put_int(opts, QUORUM_OPT_VOTE_THRESHOLD, s->threshold);
-    qdict_put_bool(opts, QUORUM_OPT_BLKVERIFY, s->is_blkverify);
-    qdict_put_bool(opts, QUORUM_OPT_REWRITE, s->rewrite_corrupted);
-    qdict_put(opts, "children", children);
-
-    bs->full_open_options = opts;
-}
-
 static void quorum_gather_child_options(BlockDriverState *bs, QDict *target)
 {
     BDRVQuorumState *s = bs->opaque;
@@ -1155,7 +1126,6 @@ static BlockDriver bdrv_quorum = {
 
     .bdrv_file_open                     = quorum_open,
     .bdrv_close                         = quorum_close,
-    .bdrv_refresh_filename              = quorum_refresh_filename,
     .bdrv_gather_child_options          = quorum_gather_child_options,
     .bdrv_dirname                       = quorum_dirname,
 
Signature · 1 line
2.9.4
author
#24 lore raw

PATCH v5 22/25 block: Do not copy exact_filename from format file

In reply to Max Reitz

If the a format BDS's file BDS is in turn a format BDS, we cannot simply use the same filename, because when opening a BDS tree based on a filename alone, qemu will create only one format node on top of one protocol node (disregarding a potential backing file).

---
 block.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)
block.c +14 -3
index e22771b..2542ff5 100644
@@ -4933,9 +4933,20 @@ void bdrv_refresh_filename(BlockDriverState *bs)
 
         bs->exact_filename[0] = '\0';
 
-        /* If no specific options have been given for this BDS, the filename of
-         * the underlying file should suffice for this one as well */
-        if (bs->file->bs->exact_filename[0] && !generate_json_filename) {
+        /* We can use the underlying file's filename if:
+         * - it has a filename,
+         * - the file is a protocol BDS, and
+         * - opening that file (as this BDS's format) will automatically create
+         *   the BDS tree we have right now, that is:
+         *   - the user did not significantly change this BDS's behavior with
+         *     some explicit options
+         *   - no non-file child of this BDS has been overridden by the user
+         *   Both of these conditions are represented by generate_json_filename.
+         */
+        if (bs->file->bs->exact_filename[0] &&
+            bs->file->bs->drv->bdrv_file_open &&
+            !generate_json_filename)
+        {
             strcpy(bs->exact_filename, bs->file->bs->exact_filename);
         }
     }
Signature · 1 line
2.9.4
author
#25 lore raw

PATCH v5 23/25 block: Fix FIXME from "Add BDS.backing_overridden"

In reply to Max Reitz

Said commit introduced a FIXME stating that bdrv_open_backing_file() should set bs->backing_overridden to true not only if the file.filename option was set, but if the "options" QDict contained any option that is significant for any node in the BDS tree emerging from the backing BDS. This behavior is implemented by this patch.

---
 block.c | 81 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 75 insertions(+), 6 deletions(-)
block.c +75 -6
index 2542ff5..2c3c983 100644
@@ -74,6 +74,9 @@ static BlockDriverState *bdrv_open_inherit(const char *filename,
                                            const BdrvChildRole *child_role,
                                            Error **errp);
 
+static bool has_significant_runtime_options(BlockDriverState *bs,
+                                            const QDict *d);
+
 /* If non-zero, use only whitelisted block drivers */
 static int use_bdrv_whitelist;
 
@@ -2124,6 +2127,42 @@ out:
     bdrv_refresh_limits(bs, NULL);
 }
 
+/**
+ * Checks whether @options contains any significant option for any of the nodes
+ * in the BDS tree emerging from @bs.
+ */
+static bool is_significant_option_tree(BlockDriverState *bs, QDict *options)
+{
+    BdrvChild *child;
+
+    if (!qdict_size(options)) {
+        /* No need to recurse */
+        return false;
+    }
+
+    if (has_significant_runtime_options(bs, options)) {
+        return true;
+    }
+
+    QLIST_FOREACH(child, &bs->children, next) {
+        QDict *child_options;
+        char *option_prefix;
+
+        option_prefix = g_strdup_printf("%s.", child->name);
+        qdict_extract_subqdict(options, &child_options, option_prefix);
+        g_free(option_prefix);
+
+        if (is_significant_option_tree(child->bs, child_options)) {
+            QDECREF(child_options);
+            return true;
+        }
+
+        QDECREF(child_options);
+    }
+
+    return false;
+}
+
 /*
  * Opens the backing file for a BlockDriverState if not yet open
  *
@@ -2142,7 +2181,7 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *parent_options,
     const char *reference = NULL;
     int ret = 0;
     BlockDriverState *backing_hd;
-    QDict *options;
+    QDict *options, *cloned_options = NULL;
     QDict *tmp_parent_options = NULL;
     Error *local_err = NULL;
 
@@ -2172,11 +2211,6 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *parent_options,
     reference = qdict_get_try_str(parent_options, bdref_key);
     if (reference || qdict_haskey(options, "file.filename")) {
         /* keep backing_filename NULL */
-
-        /* FIXME: Should also be set to true if @options contains other runtime
-         *        options which control the data that is read from the backing
-         *        BDS */
-        bs->backing_overridden = true;
     } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
         QDECREF(options);
         goto free_exit;
@@ -2197,6 +2231,8 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *parent_options,
         goto free_exit;
     }
 
+    cloned_options = qdict_clone_shallow(options);
+
     if (bs->backing_format[0] != '\0' && !qdict_haskey(options, "driver")) {
         qdict_put_str(options, "driver", bs->backing_format);
     }
@@ -2210,6 +2246,10 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *parent_options,
         goto free_exit;
     }
 
+    if (reference || is_significant_option_tree(backing_hd, cloned_options)) {
+        bs->backing_overridden = true;
+    }
+
     /* Hook up the backing file link; drop our reference, bs owns the
      * backing_hd reference now */
     bdrv_set_backing_hd(bs, backing_hd, &local_err);
@@ -2225,6 +2265,7 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *parent_options,
 free_exit:
     g_free(backing_filename);
     QDECREF(tmp_parent_options);
+    QDECREF(cloned_options);
     return ret;
 }
 
@@ -4802,6 +4843,34 @@ static const char *const *significant_options(BlockDriverState *bs,
 }
 
 /**
+ * Returns true if @d contains any options the block driver of @bs considers to
+ * be significant runtime options.
+ */
+static bool has_significant_runtime_options(BlockDriverState *bs,
+                                            const QDict *d)
+{
+    const char *const *option_name = NULL;
+
+    while ((option_name = significant_options(bs, option_name))) {
+        assert(strlen(*option_name) > 0);
+        if ((*option_name)[strlen(*option_name) - 1] != '.') {
+            if (qdict_haskey(d, *option_name)) {
+                return true;
+            }
+        } else {
+            const QDictEntry *entry;
+            for (entry = qdict_first(d); entry; entry = qdict_next(d, entry)) {
+                if (strstart(qdict_entry_key(entry), *option_name, NULL)) {
+                    return true;
+                }
+            }
+        }
+    }
+
+    return false;
+}
+
+/**
  * Copies all significant runtime options from bs->options to the given QDict.
  * The set of significant option keys is determined by invoking
  * significant_options().
Signature · 1 line
2.9.4
author
#26 lore raw

PATCH v5 24/25 block/curl: Implement bdrv_refresh_filename()

In reply to Max Reitz
---
 block/curl.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
block/curl.c +18 -0
index 11318a9..fe57223 100644
@@ -957,6 +957,20 @@ static int64_t curl_getlength(BlockDriverState *bs)
     return s->len;
 }
 
+static void curl_refresh_filename(BlockDriverState *bs)
+{
+    BDRVCURLState *s = bs->opaque;
+
+    if (!s->sslverify || s->cookie ||
+        s->username || s->password || s->proxyusername || s->proxypassword)
+    {
+        return;
+    }
+
+    pstrcpy(bs->exact_filename, sizeof(bs->exact_filename), s->url);
+}
+
+
 static const char *const curl_sgfnt_runtime_opts[] = {
     CURL_BLOCK_OPT_URL,
     CURL_BLOCK_OPT_SSLVERIFY,
@@ -985,6 +999,7 @@ static BlockDriver bdrv_http = {
     .bdrv_detach_aio_context    = curl_detach_aio_context,
     .bdrv_attach_aio_context    = curl_attach_aio_context,
 
+    .bdrv_refresh_filename      = curl_refresh_filename,
     .sgfnt_runtime_opts         = curl_sgfnt_runtime_opts,
 };
 
@@ -1003,6 +1018,7 @@ static BlockDriver bdrv_https = {
     .bdrv_detach_aio_context    = curl_detach_aio_context,
     .bdrv_attach_aio_context    = curl_attach_aio_context,
 
+    .bdrv_refresh_filename      = curl_refresh_filename,
     .sgfnt_runtime_opts         = curl_sgfnt_runtime_opts,
 };
 
@@ -1021,6 +1037,7 @@ static BlockDriver bdrv_ftp = {
     .bdrv_detach_aio_context    = curl_detach_aio_context,
     .bdrv_attach_aio_context    = curl_attach_aio_context,
 
+    .bdrv_refresh_filename      = curl_refresh_filename,
     .sgfnt_runtime_opts         = curl_sgfnt_runtime_opts,
 };
 
@@ -1039,6 +1056,7 @@ static BlockDriver bdrv_ftps = {
     .bdrv_detach_aio_context    = curl_detach_aio_context,
     .bdrv_attach_aio_context    = curl_attach_aio_context,
 
+    .bdrv_refresh_filename      = curl_refresh_filename,
     .sgfnt_runtime_opts         = curl_sgfnt_runtime_opts,
 };
 
Signature · 1 line
2.9.4
author
#27 lore raw

PATCH v5 25/25 block/null: Generate filename even with latency-ns

In reply to Max Reitz

While we cannot represent the latency-ns option in a filename, it is not a significant option so not being able to should not stop us from generating a filename nonetheless.

---
 block/null.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
block/null.c +2 -1
index fb03fb9..f665bcf 100644
@@ -231,7 +231,8 @@ static void null_refresh_filename(BlockDriverState *bs)
     {
         /* These options can be ignored */
         if (strcmp(qdict_entry_key(e), "filename") &&
-            strcmp(qdict_entry_key(e), "driver"))
+            strcmp(qdict_entry_key(e), "driver") &&
+            strcmp(qdict_entry_key(e), NULL_OPT_LATENCY))
         {
             return;
         }
Signature · 1 line
2.9.4
#28 lore raw
In reply to Max Reitz

Bump for 2.11; I assume this needs to be rebased and resent, yes?

Quoted 189 lines · Max Reitz

[If you have read the cover letter in x \in [v2, v4], there is nothing
new here; feel free to skip to the bottom to read the changes from v4.]

There are some issues regarding filename generation right now:

- You always get a JSON filename if you set even a single qcow2-specific runtime options (as long as it does not have a dot in it, which is a bug, too, but here it is working in our favor...). That is not nice and actually breaks the usage of backing files with relative filenames with such qcow2 BDS.

- As hinted above, you cannot use relative backing filenames with BDS that have a JSON filename only, even though qemu might be able to obtain the directory name by walking through the BDS graph to the protocol level.

- Overriding the backing file at runtime should invalidate the filename because it actually changes the BDS's data. Therefore, we need to force a JSON filename in that case, containing the backing file override.

- Much of our code assumes paths never to exceed PATH_MAX in length. This is wrong, at least because of JSON filenames. This should be fixed wherever the opportunity arises.

- If a driver decides to implement bdrv_refresh_filename(), that implementation has to not only refresh the filename (as one would think) but it must also refresh the runtime options (bs->full_open_options). That is stupid. (I'm allowed to say that because I'm to blame for it.)

This series is enclosed by four patches (two at the front, two at the back) that fix more or less general issues. They are included because:
- Patch 1 is required so that in patch 3 it's obvious why we don't need to set backing_overriden there or call bdrv_refresh_filename()
- Patch 2 is already reviewed, so I might just as well keep it.
- Patches 24 and 25 are basically general bug fixes. Their connection to this series is obvious, however, I think, and they depend on the rest of the series, so I decided to just put them in.

Patches 3 and 4 address the third issue above, and patch 23 adds something that's missing from patch 3. It cannot be squashed into patch 3, however, because it depends on functionality introduced by patches 18 to 22.
Consequently, patch 3 introduces a FIXME that is resolved by patch 23.

Patches 5 to 9 address the fourth issue above, and are also necessary preparation for the following patches.

Patches 10 to 16 address the second issue above, patch 17 adds a test case. They implement a bdrv_dirname() function that returns the base directory of a BDS by walking through the BDS graph to the protocol layer and then trying to obtain a path based on that BDS's exact_filename. This obviously fails if exact_filename on the protocol layer is not set.
This behavior can be overriden either by any block driver along the way implementing bdrv_dirname() itself or by the user through the new 'base-directory' node option. This may allow us to resolve relative filenames even if the reference BDS only has a JSON filename.

Patches 18 to 22 address both the first and last issues above. They add a field called "sgfnt_runtime_opts" to the BlockDriver structure. Block drivers may point this to an array containing all of the runtime options they accept that may change their BDS's data (i.e. that are "significant"). bdrv_refresh_filename() will use this list to generate bs->full_open_options itself (with only a little help by the block driver, if necessary, through the .bdrv_gather_child_options() function). This not only simplifies the process significantly, but also results in the default implementation generating JSON filenames only when really necessary.

v5: Rebased on my block branch and addressed Eric's comments on v4
- Patch 1: Rebase conflict (bdrv_set_backing_hd() is now called in mirror_exit() instead of mirror_complete())
- Patch 2: Drop bdrv_refresh_filename() calls in the commit and mirror block drivers' implementations of that very function
- Patch 5: Rebase conflict due to 0d54a6fed3ebaf0e
- Patch 7: Rebase conflict due to 418661e0324c1c41
- Patch 10: Added comment on bdrv_dirname()'s interface [Eric]
- Patch 13: Drop NBD bdrv_dirname() support [Eric]
- Patch 16: More or less contextual rebase conflicts, bumped qemu's version number, removed the "#optional"
- Patch 18: More block drivers to support
- Patch 19:
- Added comment on bdrv_gather_child_options()'s interface
- Fixed implementation for VMDK: We should check that bs->backing is non-NULL before accessing it (and it may be NULL even if bs->backing_overridden is true)
- Patch 21:
- Added comment on bdrv_refresh_filename()'s interface
- Rebase conflicts mostly because of the new qdict_put_*() helpers
- Handle the mirror and commit "block drivers", too

git-backport-diff against v4:

Key:
[----] : patches are identical
[####] : number of functional differences between upstream/downstream patch [down] : patch is downstream-only
The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively

001/25:[0016] [FC] 'block/mirror: Small absolute-paths simplification' 002/25:[0002] [FC] 'block: Use children list in bdrv_refresh_filename' 003/25:[----] [-C] 'block: Add BDS.backing_overridden' 004/25:[----] [-C] 'block: Respect backing bs in bdrv_refresh_filename' 005/25:[0026] [FC] 'block: Make path_combine() return the path' 006/25:[----] [-C] 'block: bdrv_get_full_backing_filename_from_...'s ret. val.' 007/25:[0016] [FC] 'block: bdrv_get_full_backing_filename's ret. val.' 008/25:[----] [--] 'block: Add bdrv_make_absolute_filename()' 009/25:[----] [-C] 'block: Fix bdrv_find_backing_image()' 010/25:[0006] [FC] 'block: Add bdrv_dirname()'
011/25:[----] [-C] 'blkverify: Make bdrv_dirname() return NULL' 012/25:[----] [--] 'quorum: Make bdrv_dirname() return NULL' 013/25:[down] 'block/nbd: Make bdrv_dirname() return NULL' 014/25:[----] [--] 'block/nfs: Implement bdrv_dirname()' 015/25:[----] [--] 'block: Use bdrv_dirname() for relative filenames' 016/25:[0012] [FC] 'block: Add 'base-directory' BDS option' 017/25:[----] [--] 'iotests: Add quorum case to test 110' 018/25:[0074] [FC] 'block: Add sgfnt_runtime_opts to BlockDriver' 019/25:[0014] [FC] 'block: Add BlockDriver.bdrv_gather_child_options' 020/25:[----] [--] 'block: Generically refresh runtime options' 021/25:[0118] [FC] 'block: Purify .bdrv_refresh_filename()' 022/25:[----] [--] 'block: Do not copy exact_filename from format file' 023/25:[----] [-C] 'block: Fix FIXME from "Add BDS.backing_overridden"' 024/25:[----] [--] 'block/curl: Implement bdrv_refresh_filename()' 025/25:[----] [--] 'block/null: Generate filename even with latency-ns'

Max Reitz (25):
block/mirror: Small absolute-paths simplification
block: Use children list in bdrv_refresh_filename
block: Add BDS.backing_overridden
block: Respect backing bs in bdrv_refresh_filename
block: Make path_combine() return the path
block: bdrv_get_full_backing_filename_from_...'s ret. val.
block: bdrv_get_full_backing_filename's ret. val.
block: Add bdrv_make_absolute_filename()
block: Fix bdrv_find_backing_image()
block: Add bdrv_dirname()
blkverify: Make bdrv_dirname() return NULL
quorum: Make bdrv_dirname() return NULL block/nbd: Make bdrv_dirname() return NULL block/nfs: Implement bdrv_dirname()
block: Use bdrv_dirname() for relative filenames
block: Add 'base-directory' BDS option
iotests: Add quorum case to test 110
block: Add sgfnt_runtime_opts to BlockDriver
block: Add BlockDriver.bdrv_gather_child_options
block: Generically refresh runtime options
block: Purify .bdrv_refresh_filename()
block: Do not copy exact_filename from format file
block: Fix FIXME from "Add BDS.backing_overridden" block/curl: Implement bdrv_refresh_filename() block/null: Generate filename even with latency-ns

 qapi/block-core.json          |   9 +
 include/block/block.h         |  15 +-
 include/block/block_int.h     |  36 ++-
 block.c                       | 501 ++++++++++++++++++++++++++++--------------
 block/blkdebug.c              |  58 ++---
 block/blkverify.c             |  29 +--
 block/commit.c                |   3 +-
 block/crypto.c                |   5 +
 block/curl.c                  |  39 ++++
 block/gluster.c               |  19 ++
 block/iscsi.c                 |  18 ++
 block/mirror.c                |  19 +-
 block/nbd.c                   |  46 ++--
 block/nfs.c                   |  46 ++--
 block/null.c                  |  33 ++-
 block/qapi.c                  |  12 +-
 block/quorum.c                |  58 +++--
 block/rbd.c                   |   5 +
 block/replication.c           |   5 +
 block/sheepdog.c              |  12 +
 block/ssh.c                   |   5 +
 block/vmdk.c                  |  24 +-
 block/vpc.c                   |   4 +
 block/vvfat.c                 |   4 +
 block/vxhs.c                  |   8 +
 blockdev.c                    |  16 ++
 tests/qemu-iotests/051.out    |   8 +-
 tests/qemu-iotests/051.pc.out |   8 +-
 tests/qemu-iotests/110        |  51 ++++-
 tests/qemu-iotests/110.out    |  14 +-
 30 files changed, 769 insertions(+), 341 deletions(-)