Add 'blockdev-snapshot' command

index 1521eb7..c32dc20 100644
@@ -1496,7 +1496,7 @@
 ##
 { 'union': 'TransactionAction',
   'data': {
-       'blockdev-snapshot-sync': 'BlockdevSnapshot',
+       'blockdev-snapshot-sync': 'BlockdevSnapshotSync',
        'drive-backup': 'DriveBackup',
        'blockdev-backup': 'BlockdevBackup',
        'abort': 'Abort',

index cb99cad..ec50f06 100644
@@ -682,7 +682,7 @@
   'data': [ 'existing', 'absolute-paths' ] }
 
 ##
-# @BlockdevSnapshot
+# @BlockdevSnapshotSync
 #
 # Either @device or @node-name must be set but not both.
 #

@@ -699,7 +699,7 @@
 # @mode: #optional whether and how QEMU should create a new image, default is
 #        'absolute-paths'.
 ##
-{ 'struct': 'BlockdevSnapshot',
+{ 'struct': 'BlockdevSnapshotSync',
   'data': { '*device': 'str', '*node-name': 'str',
             'snapshot-file': 'str', '*snapshot-node-name': 'str',
             '*format': 'str', '*mode': 'NewImageMode' } }

@@ -790,7 +790,7 @@
 #
 # Generates a synchronous snapshot of a block device.
 #
-# For the arguments, see the documentation of BlockdevSnapshot.
+# For the arguments, see the documentation of BlockdevSnapshotSync.
 #
 # Returns: nothing on success
 #          If @device is not a valid block device, DeviceNotFound

@@ -798,7 +798,7 @@
 # Since 0.14.0
 ##
 { 'command': 'blockdev-snapshot-sync',
-  'data': 'BlockdevSnapshot' }
+  'data': 'BlockdevSnapshotSync' }
 
 ##
 # @change-backing-file

index c32dc20..71dacea 100644
@@ -1493,9 +1493,11 @@
 # abort since 1.6
 # blockdev-snapshot-internal-sync since 1.7
 # blockdev-backup since 2.3
+# blockdev-snapshot since 2.5
 ##
 { 'union': 'TransactionAction',
   'data': {
+       'blockdev-snapshot': 'BlockdevSnapshot',
        'blockdev-snapshot-sync': 'BlockdevSnapshotSync',
        'drive-backup': 'DriveBackup',
        'blockdev-backup': 'BlockdevBackup',

index ec50f06..328c155 100644
@@ -705,6 +705,21 @@
             '*format': 'str', '*mode': 'NewImageMode' } }
 
 ##
+# @BlockdevSnapshot
+#
+# @device: device or node name to generate the snapshot from.
+#
+# @snapshot: reference to the existing block device that will be used
+#            for the snapshot. It must not have a current backing file
+#            (this can be achieved by passing "backing": "" to
+#            blockdev-add).
+#
+# Since 2.5
+##
+{ 'struct': 'BlockdevSnapshot',
+  'data': { 'device': 'str', 'snapshot': 'str' } }
+
+##
 # @DriveBackup
 #
 # @device: the name of the device which should be copied.

@@ -800,6 +815,19 @@
 { 'command': 'blockdev-snapshot-sync',
   'data': 'BlockdevSnapshotSync' }
 
+
+##
+# @blockdev-snapshot
+#
+# Generates a snapshot of a block device.
+#
+# For the arguments, see the documentation of BlockdevSnapshot.
+#
+# Since 2.5
+##
+{ 'command': 'blockdev-snapshot',
+  'data': 'BlockdevSnapshot' }
+
 ##
 # @change-backing-file
 #

index 495670b..516f935 100644
@@ -1454,6 +1454,44 @@ Example:
 EQMP
 
     {
+        .name       = "blockdev-snapshot",
+        .args_type  = "device:s,snapshot:s",
+        .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot,
+    },
+
+SQMP
+blockdev-snapshot
+-----------------
+Since 2.5
+
+Create a snapshot, by installing 'device' as the backing image of
+'snapshot'. Additionally, if 'device' is associated with a block
+device, the block device changes to using 'snapshot' as its new active
+image.
+
+Arguments:
+
+- "device": snapshot source (json-string)
+- "snapshot": snapshot target (json-string)
+
+Example:
+
+-> { "execute": "blockdev-add",
+                "arguments": { "options": { "driver": "qcow2",
+                                            "node-name": "node1534",
+                                            "file": { "driver": "file",
+                                                      "filename": "hd1.qcow2" },
+                                            "backing": "" } } }
+
+<- { "return": {} }
+
+-> { "execute": "blockdev-snapshot", "arguments": { "device": "ide-hd0",
+                                                    "snapshot": "node1534" } }
+<- { "return": {} }
+
+EQMP
+
+    {
         .name       = "blockdev-snapshot-internal-sync",
         .args_type  = "device:B,name:s",
         .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_internal_sync,

index 56cd6f8..532eb0e 100755
@@ -7,6 +7,7 @@
 # snapshots are performed.
 #
 # Copyright (C) 2014 Red Hat, Inc.
+# Copyright (C) 2015 Igalia, S.L.
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by

@@ -34,17 +35,17 @@ status=1	# failure is the default!
 snapshot_virt0="snapshot-v0.qcow2"
 snapshot_virt1="snapshot-v1.qcow2"
 
-MAX_SNAPSHOTS=10
+SNAPSHOTS=10
 
 _cleanup()
 {
     _cleanup_qemu
-    for i in $(seq 1 ${MAX_SNAPSHOTS})
+    for i in $(seq 1 ${SNAPSHOTS})
     do
         rm -f "${TEST_DIR}/${i}-${snapshot_virt0}"
         rm -f "${TEST_DIR}/${i}-${snapshot_virt1}"
     done
-	_cleanup_test_img
+    rm -f "${TEST_IMG}.1" "${TEST_IMG}.2"
 
 }
 trap "_cleanup; exit \$status" 0 1 2 3 15

@@ -85,18 +86,50 @@ function create_group_snapshot()
     _send_qemu_cmd $h "${cmd}" "return"
 }
 
+# ${1}: unique identifier for the snapshot filename
+# ${2}: true: open backing images; false: don't open them (default)
+function add_snapshot_image()
+{
+    if [ "${2}" = "true" ]; then
+        extra_params=""
+    else
+        extra_params="'backing': '', "
+    fi
+    base_image="${TEST_DIR}/$((${1}-1))-${snapshot_virt0}"
+    snapshot_file="${TEST_DIR}/${1}-${snapshot_virt0}"
+    _make_test_img -b "${base_image}" "$size"
+    mv "${TEST_IMG}" "${snapshot_file}"
+    cmd="{ 'execute': 'blockdev-add', 'arguments':
+           { 'options':
+             { 'driver': 'qcow2', 'node-name': 'snap_"${1}"', "${extra_params}"
+               'file':
+               { 'driver': 'file', 'filename': '"${snapshot_file}"' } } } }"
+    _send_qemu_cmd $h "${cmd}" "return"
+}
+
+# ${1}: unique identifier for the snapshot filename
+# ${2}: expected response, defaults to 'return'
+function blockdev_snapshot()
+{
+    cmd="{ 'execute': 'blockdev-snapshot',
+                      'arguments': { 'device': 'virtio0',
+                                     'snapshot':'snap_"${1}"' } }"
+    _send_qemu_cmd $h "${cmd}" "${2:-return}"
+}
+
 size=128M
 
 _make_test_img $size
-mv "${TEST_IMG}" "${TEST_IMG}.orig"
+mv "${TEST_IMG}" "${TEST_IMG}.1"
 _make_test_img $size
+mv "${TEST_IMG}" "${TEST_IMG}.2"
 
 echo
 echo === Running QEMU ===
 echo
 
 qemu_comm_method="qmp"
-_launch_qemu -drive file="${TEST_IMG}.orig",if=virtio -drive file="${TEST_IMG}",if=virtio
+_launch_qemu -drive file="${TEST_IMG}.1",if=virtio -drive file="${TEST_IMG}.2",if=virtio
 h=$QEMU_HANDLE
 
 echo

@@ -105,6 +138,8 @@ echo
 
 _send_qemu_cmd $h "{ 'execute': 'qmp_capabilities' }" "return"
 
+# Tests for the blockdev-snapshot-sync command
+
 echo
 echo === Create a single snapshot on virtio0 ===
 echo

@@ -132,11 +167,66 @@ echo
 echo === Create several transactional group snapshots ===
 echo
 
-for i in $(seq 2 ${MAX_SNAPSHOTS})
+for i in $(seq 2 ${SNAPSHOTS})
 do
     create_group_snapshot ${i}
 done
 
+# Tests for the blockdev-snapshot command
+
+echo
+echo === Create a couple of snapshots using blockdev-snapshot ===
+echo
+
+SNAPSHOTS=$((${SNAPSHOTS}+1))
+add_snapshot_image ${SNAPSHOTS}
+blockdev_snapshot ${SNAPSHOTS}
+
+SNAPSHOTS=$((${SNAPSHOTS}+1))
+add_snapshot_image ${SNAPSHOTS}
+blockdev_snapshot ${SNAPSHOTS}
+
+echo
+echo === Invalid command - snapshot node used as active layer ===
+echo
+
+blockdev_snapshot ${SNAPSHOTS} error
+
+_send_qemu_cmd $h "{ 'execute': 'blockdev-snapshot',
+                     'arguments': { 'device':'virtio0',
+                                    'snapshot':'virtio0' }
+                   }" "error"
+
+_send_qemu_cmd $h "{ 'execute': 'blockdev-snapshot',
+                     'arguments': { 'device':'virtio0',
+                                    'snapshot':'virtio1' }
+                   }" "error"
+
+echo
+echo === Invalid command - snapshot node used as backing hd ===
+echo
+
+blockdev_snapshot $((${SNAPSHOTS}-1)) error
+
+echo
+echo === Invalid command - snapshot node has a backing image ===
+echo
+
+SNAPSHOTS=$((${SNAPSHOTS}+1))
+add_snapshot_image ${SNAPSHOTS} true
+blockdev_snapshot ${SNAPSHOTS} error
+
+echo
+echo === Invalid command - The node does not exist ===
+echo
+
+blockdev_snapshot $((${SNAPSHOTS}+1)) error
+
+_send_qemu_cmd $h "{ 'execute': 'blockdev-snapshot',
+                     'arguments': { 'device':'nodevice',
+                                    'snapshot':'snap_"${SNAPSHOTS}"' }
+                   }" "error"
+
 # success, all done
 echo "*** done"
 rm -f $seq.full

index 5eb8b94..2238f6d 100644
@@ -11,7 +11,7 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
 
 === Create a single snapshot on virtio0 ===
 
-Formatting 'TEST_DIR/1-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file='TEST_DIR/t.qcow2.orig' backing_fmt='qcow2' encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/1-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file='TEST_DIR/t.qcow2.1' backing_fmt='qcow2' encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 
 === Invalid command - missing device and nodename ===

@@ -26,7 +26,7 @@ Formatting 'TEST_DIR/1-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file
 === Create several transactional group snapshots ===
 
 Formatting 'TEST_DIR/2-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file='TEST_DIR/1-snapshot-v0.qcow2' backing_fmt='qcow2' encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16
-Formatting 'TEST_DIR/2-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file='TEST_DIR/t.qcow2' backing_fmt='qcow2' encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/2-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file='TEST_DIR/t.qcow2.2' backing_fmt='qcow2' encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 Formatting 'TEST_DIR/3-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file='TEST_DIR/2-snapshot-v0.qcow2' backing_fmt='qcow2' encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16
 Formatting 'TEST_DIR/3-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file='TEST_DIR/2-snapshot-v1.qcow2' backing_fmt='qcow2' encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16

@@ -52,4 +52,34 @@ Formatting 'TEST_DIR/9-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file
 Formatting 'TEST_DIR/10-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file='TEST_DIR/9-snapshot-v0.qcow2' backing_fmt='qcow2' encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16
 Formatting 'TEST_DIR/10-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file='TEST_DIR/9-snapshot-v1.qcow2' backing_fmt='qcow2' encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16
 {"return": {}}
+
+=== Create a couple of snapshots using blockdev-snapshot ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file='TEST_DIR/10-snapshot-v0.IMGFMT'
+{"return": {}}
+{"return": {}}
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file='TEST_DIR/11-snapshot-v0.IMGFMT'
+{"return": {}}
+{"return": {}}
+
+=== Invalid command - snapshot node used as active layer ===
+
+{"error": {"class": "GenericError", "desc": "The snapshot is already in use by virtio0"}}
+{"error": {"class": "GenericError", "desc": "The snapshot is already in use by virtio0"}}
+{"error": {"class": "GenericError", "desc": "The snapshot is already in use by virtio1"}}
+
+=== Invalid command - snapshot node used as backing hd ===
+
+{"error": {"class": "GenericError", "desc": "Node 'snap_11' is busy: node is used as backing hd of 'virtio0'"}}
+
+=== Invalid command - snapshot node has a backing image ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file='TEST_DIR/12-snapshot-v0.IMGFMT'
+{"return": {}}
+{"error": {"class": "GenericError", "desc": "The snapshot already has a backing image"}}
+
+=== Invalid command - The node does not exist ===
+
+{"error": {"class": "GenericError", "desc": "Cannot find device=snap_14 nor node_name=snap_14"}}
+{"error": {"class": "GenericError", "desc": "Cannot find device=nodevice nor node_name=nodevice"}}
 *** done