Skip to contentSkip to conversation

2.6.13: USB vibration feedback gamepad problem.

DISCUSSION [email protected] 1 participant 1 message Sep 17, 2005

lore
Share & tools
lore
#0 lore raw

After upgrading to 2.6.13, whenever I plug in my usb gamepad, it automatically starts vibrating and can't be stopped without unloading the usbhid module.

2.6.12 had a similar problem but the vibration happens only when usbfs is mounted and lasts only a few seconds before stopping.

Prior versions never had this problem.

/proc/bus/usb/device entry:

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#=  4 Spd=1.5 MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0c12 ProdID=0023 Rev= 0.90
S:  Manufacturer=Zeroplus
S:  Product=USB Vibration Feedback Gamepad
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=10ms

__________________________________________________________
Get your Private, Free Email from HTTP://www.DmailMan.Com