Skip to contentSkip to conversation

newbie autofs problem

DISCUSSION [email protected] 2 participants 2 messages Apr 10, 2006 – Apr 12, 2006 Kernel automounter

lore
Share & tools
lore
#0 lore raw

Hi,

I'm using autofs to automount the home dirs of my users, distributed among several machines. The config files are:

***** /etc/auto.master: *****
/home /etc/auto_home
***** end /etc/auto.master *****

***** /etc/auto_home: *****

canalias        -rsize=8192,wsize=8192  e04:/homes/&
jmbenita        -rsize=8192,wsize=8192  e05:/homes/&

...
***** end /etc/auto_home *****

Until now, it was all working fine. A few days ago I moved the directory e04:/homes from / to a (larger) partition, which I now mount as /homes:

***** /etc/fstab: *****
# /etc/fstab: static file system information.
#

#<file sys>          <mount point>     <type>   <options>   <dump>   <pass>
/dev/sda3    /                 ext3    rw,errors=remount-ro  0    1
/dev/sda2    none              swap    rw        0    0
none         /proc             proc    defaults  0    0

none /proc/bus/usb usbdevfs defaults
/dev/fd0 /floppy auto users,noauto 0 0
/dev/sda5 /usr ext3 defaults 0 2
/dev/sda6 /homes ext3 defaults 0 2
***** end /etc/fstab *****

Since that moment, I am having problems accessing anything below /home. For instance, I can't do

ls /home

because the shell hangs. It just becomes irresponsive.

There are currently Condor processes running with working directory /home/canalias.

I've been trying to find out what's going on, with no luck for the moment. Any hint would be greatly appreciated. I don't even know where to look for logged errors from the automounter.

I next list the output of command "mount" and "autofs status" for reference:

eixam:~# mount
/dev/sda3 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
/dev/sda5 on /usr type ext3 (rw)
/dev/sda6 on /homes type ext3 (rw)
usbfs on /proc/bus/usb type usbfs (rw)
automount(pid1377) on /home type autofs
(rw,fd=4,pgrp=1377,minproto=2,maxproto=4)
/homes/condor on /home/condor type none (rw,bind)
e04:/homes/canalias on /home/canalias type nfs
(rw,rsize=8192,wsize=8192,addr=192.168.1.4)
e05:/homes/jmbenita on /home/jmbenita type nfs
(rw,rsize=8192,wsize=8192,addr=192.168.1.5)
eixam:~# /etc/init.d/autofs status
Configured Mount Points:
------------------------
/usr/sbin/automount --timeout=300 /home file /etc/auto_home

Active Mount Points:
--------------------
/usr/sbin/automount --pid-file=/var/run/autofs/_home.pid --timeout=300 /home file /etc/auto_home

Thanks a lot,
/P

#1 lore raw

==> Regarding [autofs] newbie autofs problem; [email protected] adds:

pablo.roldan> Hi, I'm using autofs to automount the home dirs of my users, pablo.roldan> distributed among several machines. The config files are:

pablo.roldan> ***** /etc/auto.master: ***** /home /etc/auto_home ***** end pablo.roldan> /etc/auto.master *****

pablo.roldan> ***** /etc/auto_home: ***** canalias -rsize=8192,wsize=8192 pablo.roldan> e04:/homes/& jmbenita -rsize=8192,wsize=8192 e05:/homes/& ... pablo.roldan> ***** end /etc/auto_home *****

pablo.roldan> Until now, it was all working fine. A few days ago I moved pablo.roldan> the directory e04:/homes from / to a (larger) partition, pablo.roldan> which I now mount as /homes:

Did you make sure that no clients had the file system mounted? You simply can't move things around like this and expect it to work.

pablo.roldan> ***** /etc/fstab: ***** # /etc/fstab: static file system pablo.roldan> information. # #<file sys> <mount point> <type> <options> pablo.roldan> <dump> <pass> /dev/sda3 / ext3 rw,errors=remount-ro 0 1 pablo.roldan> /dev/sda2 none swap rw 0 0 none /proc proc defaults 0 0 none pablo.roldan> /proc/bus/usb usbdevfs defaults /dev/fd0 /floppy auto pablo.roldan> users,noauto 0 0 /dev/sda5 /usr ext3 defaults 0 2 /dev/sda6 pablo.roldan> /homes ext3 defaults 0 2 ***** end /etc/fstab *****

pablo.roldan> Since that moment, I am having problems accessing anything pablo.roldan> below /home. For instance, I can't do

pablo.roldan> ls /home

pablo.roldan> because the shell hangs. It just becomes irresponsive.

On the client system? I'm surprised it hangs, but ESTALE would be very likely. Alt-Sysrq-t will show where the ls is hanging out. However, this really sounds like an administrative error. Reboot the client.

The automounter logs to /var/log/messages. You should check there for any error messages if you feel this isn't purely a user error.

-Jeff