Skip to contentSkip to conversation

cpuinfo_cur_freq always max

DISCUSSION Stephen Clark 3 participants 6 messages Dec 17, 2007 – Dec 18, 2007 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hello,

Running linux 2.6.23.1-21.fc7 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq correctly reflects the cpu speed, when idle it is 996000 and when compiling it is 1826000. Its also the same as what is in /proc/cpuinfo.

But with 2.6.23.8-34.fc7 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq is always the max cpu speed of 1826000.

While cpuinfo_cur_freq is the max 1826000 /proc/cpuinfo relflects the correct speed when idle of 996000

This is on an asus laptop with an intel core 2 duo T5600 processor.

Anyone else see this problem.

Regards,
Steve

Signature · 3 lines
"They that give up essential liberty to obtain temporary safety, deserve neither liberty nor safety."  (Ben Franklin)

"The course of history shows that as a government grows, liberty decreases."  (Thomas Jefferson)
#1 lore raw

Hi Steve,

Quoted 7 lines · Stephen Clark

But with 2.6.23.8-34.fc7 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq is always the max cpu speed of 1826000.

While cpuinfo_cur_freq is the max 1826000 /proc/cpuinfo relflects the correct speed when idle of
996000

Which governor are you using? ondemand?

Hannes

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw

Hi,

Quoted 3 lines · Stephen Clark
Quoted 1 line

Which governor are you using? ondemand?

Not sure - but the only thing that is changed is the kernel - if I go back to 2.6.23.1 it works correctly.

Have a look at /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

Hannes

PS: Steve, please keep the list in CC.

#4 lore raw
Quoted 14 lines · Johannes Weiner

Hi,

Quoted 7 lines · Stephen Clark
Quoted 3 lines

Which governor are you using? ondemand?

Not sure - but the only thing that is changed is the kernel - if I go back to 2.6.23.1 it works correctly.

Quoted 8 lines

Have a look at /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

Hannes

PS: Steve, please keep the list in CC.

userspace

Signature · 3 lines
"They that give up essential liberty to obtain temporary safety, deserve neither liberty nor safety."  (Ben Franklin)

"The course of history shows that as a government grows, liberty decreases."  (Thomas Jefferson)
#5 lore raw

Hi,

Quoted 1 line · Stephen Clark

userspace

Please supply the full dmesg output on the non-working kernel the corresponding .config (or /proc/config.gz).

Added Dave to CC.

Hannes

#6 lore raw
Quoted 10 lines · Johannes Weiner

Hi,

Quoted 3 lines · Stephen Clark

userspace

Quoted 9 lines

Please supply the full dmesg output on the non-working kernel the corresponding .config (or /proc/config.gz).

Added Dave to CC.

Hannes

Duh - I rebooted into the new kernel and no longer see the behavior I described above. Maybe I had something going in the background i didn't realize. Thing was I even started a bash empty while loop to see if /proc/cpuinfo speed would go up and it did.

I have an applet that displays on my kde kicker panel that every 2 seconds reads /sys/.../cpuinfo_cur_freq and it was sitting on the max speed all the time. Hmmm.

Well Thanks for the response and sorry for the false alarm.

Steve

Signature · 3 lines
"They that give up essential liberty to obtain temporary safety, deserve neither liberty nor safety."  (Ben Franklin)

"The course of history shows that as a government grows, liberty decreases."  (Thomas Jefferson)