msepc driver (requires do_no_pfn)
PATCH 1/1 msepc driver (requires do_no_pfn)
Hi,
This patch is a repost of the mspec driver for special memory operations. It requires the do_no_pfn patch I posted a few minutes ago.
Cheers,
Jes
This patch implements the special memory driver (mspec) based on the do_no_pfn approach. The driver is currently used only on SN2 hardware with special fetchop support but could be beneficial on other architectures using the uncached mode.
----
drivers/char/Kconfig | 8 drivers/char/Makefile | 1 drivers/char/mspec.c | 422 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 431 insertions(+)
drivers/char/Kconfig +8 -0
@@ -422,6 +422,14 @@ If you have an SGI Altix with an attached SABrick say Y or M here, otherwise say N. +config MSPEC + tristate " Memory special operations driver" + depends on IA64 + help + If you have an ia64 and you want to enable memory special + operations support (formerly known as fetchop), say Y here, + otherwise say N. + source "drivers/serial/Kconfig" config UNIX98_PTYS
drivers/char/Makefile +1 -0
@@ -51,6 +51,7 @@ obj-$(CONFIG_VIOTAPE) += viotape.o obj-$(CONFIG_HVCS) += hvcs.o obj-$(CONFIG_SGI_MBCS) += mbcs.o +obj-$(CONFIG_MSPEC) += mspec.o obj-$(CONFIG_PRINTER) += lp.o obj-$(CONFIG_TIPAR) += tipar.o
drivers/char/mspec.c new file +422 -0
422 lines not on this page · raw message
drivers/char/Kconfig line 426
Quoted 3 lines
drivers/char/Kconfig +2
-0+config MSPEC + tristate " Memory special operations driver"
The two blanks after " are not needed anymore with the new Kconfig from 2.6.x.
Jan Engelhardt
Quoted 5 lines · Jan Engelhardt
drivers/char/Kconfig line 426
Quoted 2 lines
drivers/char/Kconfig +2
-0+config MSPEC + tristate " Memory special operations driver"The two blanks after " are not needed anymore with the new
Kconfigfrom 2.6.x.
Hi Jan,
You're right. I updated my patch here, next version will have it right. Lets see what happens to the nopfn stuff first.
Thanks,
Jes
PATCH 1/1 mspec driver (requires do_no_pfn)
In reply to Jes SorensenHi,
This patch is a repost of the mspec driver for special memory operations. It requires the do_no_pfn patch I posted a few minutes ago.
This version of the patch includes Jan's suggestion for changing the Kconfig description, no other changes since the previous version.
Cheers,
Jes
This patch implements the special memory driver (mspec) based on the do_no_pfn approach. The driver is currently used only on SN2 hardware with special fetchop support but could be beneficial on other architectures using the uncached mode.
----
drivers/char/Kconfig | 8 drivers/char/Makefile | 1 drivers/char/mspec.c | 422 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 431 insertions(+)
drivers/char/Kconfig +8 -0
@@ -422,6 +422,14 @@ If you have an SGI Altix with an attached SABrick say Y or M here, otherwise say N. +config MSPEC + tristate "Memory special operations driver" + depends on IA64 + help + If you have an ia64 and you want to enable memory special + operations support (formerly known as fetchop), say Y here, + otherwise say N. + source "drivers/serial/Kconfig" config UNIX98_PTYS
drivers/char/Makefile +1 -0
@@ -51,6 +51,7 @@ obj-$(CONFIG_VIOTAPE) += viotape.o obj-$(CONFIG_HVCS) += hvcs.o obj-$(CONFIG_SGI_MBCS) += mbcs.o +obj-$(CONFIG_MSPEC) += mspec.o obj-$(CONFIG_PRINTER) += lp.o obj-$(CONFIG_TIPAR) += tipar.o
drivers/char/mspec.c new file +422 -0
422 lines not on this page · raw message
Re: [patch] mspec driver (requires do_no_pfn)
Hi,
Updated version of the mspec driver to match the changes in the nopfn interface.
Cheers,
Jes
This patch implements the special memory driver (mspec) based on the do_no_pfn approach. The driver is currently used only on SN2 hardware with special fetchop support but could be beneficial on other architectures using the uncached mode.
----
drivers/char/Kconfig | 8 drivers/char/Makefile | 1 drivers/char/mspec.c | 422 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 431 insertions(+)
drivers/char/Kconfig +8 -0
@@ -422,6 +422,14 @@ If you have an SGI Altix with an attached SABrick say Y or M here, otherwise say N. +config MSPEC + tristate "Memory special operations driver" + depends on IA64 + help + If you have an ia64 and you want to enable memory special + operations support (formerly known as fetchop), say Y here, + otherwise say N. + source "drivers/serial/Kconfig" config UNIX98_PTYS
drivers/char/Makefile +1 -0
@@ -51,6 +51,7 @@ obj-$(CONFIG_VIOTAPE) += viotape.o obj-$(CONFIG_HVCS) += hvcs.o obj-$(CONFIG_SGI_MBCS) += mbcs.o +obj-$(CONFIG_MSPEC) += mspec.o obj-$(CONFIG_PRINTER) += lp.o obj-$(CONFIG_TIPAR) += tipar.o
drivers/char/mspec.c new file +422 -0
422 lines not on this page · raw message