Skip to contentSkip to conversation

ufs: Remove usfhcd_is_*_pm() macros

PATCH Applied Bart Van Assche 2 participants 3 messages May 13, 2021 – May 22, 2021 SCSI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ufs: Remove usfhcd_is_*_pm() macros

Remove these macros to make the UFS driver source code easier to read. These macros were introduced by commit 57d104c153d3 ("ufs: add UFS power management support").

Cc Can Guo <[email protected]>
Cc Alim Akhtar <[email protected]>
Cc Avri Altman <[email protected]>
Cc Stanley Chu <[email protected]>
Cc Bean Huo <[email protected]>
Cc Adrian Hunter <[email protected]>
---
 drivers/scsi/ufs/ufs-hisi.c | 2 +-
 drivers/scsi/ufs/ufshcd.c   | 8 ++++----
 drivers/scsi/ufs/ufshcd.h   | 4 ----
 3 files changed, 5 insertions(+), 9 deletions(-)
drivers/scsi/ufs/ufs-hisi.c +1 -1
index 0aa58131e791..e4758757fbab 100644
@@ -400,7 +400,7 @@ static int ufs_hisi_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 {
 	struct ufs_hisi_host *host = ufshcd_get_variant(hba);
 
-	if (ufshcd_is_runtime_pm(pm_op))
+	if (pm_op == UFS_RUNTIME_PM)
 		return 0;
 
 	if (host->in_suspend) {
drivers/scsi/ufs/ufshcd.c +4 -4
index 4f6b0e28735f..4510be031e14 100644
@@ -8668,8 +8668,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	enum uic_link_state req_link_state;
 
 	hba->pm_op_in_progress = 1;
-	if (!ufshcd_is_shutdown_pm(pm_op)) {
-		pm_lvl = ufshcd_is_runtime_pm(pm_op) ?
+	if (pm_op != UFS_SHUTDOWN_PM) {
+		pm_lvl = pm_op == UFS_RUNTIME_PM ?
 			 hba->rpm_lvl : hba->spm_lvl;
 		req_dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(pm_lvl);
 		req_link_state = ufs_get_pm_lvl_to_link_pwr_state(pm_lvl);
@@ -8703,7 +8703,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 		goto enable_gating;
 	}
 
-	if (ufshcd_is_runtime_pm(pm_op)) {
+	if (pm_op == UFS_RUNTIME_PM) {
 		if (ufshcd_can_autobkops_during_suspend(hba)) {
 			/*
 			 * The device is idle with no requests in the queue,
@@ -8733,7 +8733,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	flush_work(&hba->eeh_work);
 
 	if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
-		if (!ufshcd_is_runtime_pm(pm_op))
+		if (pm_op != UFS_RUNTIME_PM)
 			/* ensure that bkops is disabled */
 			ufshcd_disable_auto_bkops(hba);
 
drivers/scsi/ufs/ufshcd.h +0 -4
index 5eb66a8debc7..08d86005f8aa 100644
@@ -106,10 +106,6 @@ enum ufs_pm_op {
 	UFS_SHUTDOWN_PM,
 };
 
-#define ufshcd_is_runtime_pm(op) ((op) == UFS_RUNTIME_PM)
-#define ufshcd_is_system_pm(op) ((op) == UFS_SYSTEM_PM)
-#define ufshcd_is_shutdown_pm(op) ((op) == UFS_SHUTDOWN_PM)
-
 /* Host <-> Device UniPro Link state */
 enum uic_link_state {
 	UIC_LINK_OFF_STATE	= 0, /* Link powered down or disabled */
#1 lore raw

Bart,

Quoted 3 lines

Remove these macros to make the UFS driver source code easier to read. These macros were introduced by commit 57d104c153d3 ("ufs: add UFS power management support").

Applied to 5.14/scsi-staging, thanks!

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering