snd_pcm_wait strangeness when resampling
I've noticed some strange things with snd_pcm_wait. My application opens the sound device in non-blocking mode and uses snd_pcm_wait whenever snd_pcm_writei return EAGAIN. This works fine as long as ALSA isn't doing any resampling. However, when resampling (e.g. from 44.1 kHz to 48 kHz) snd_pcm_wait returns immediately, insisting that there is room in the buffer, after which snd_pcm_writei obviously returns EAGAIN once more. The same thing happens if I use OSS emulation and select() or poll(). Replacing the snd_pcm_wait call with usleep(10000) makes the CPU load look normal again, while the application still works.
I am using Linux 2.6.4, ALSA driver 1.0.3 and library 1.0.3a with a SIS7012 chip. It behaves the same way with kernel 2.6.3 and driver 1.0.2c. I'm not quite sure when it started.
This application used to work properly. Has something changed so I need to modify my application?
Signature · 9 lines
Måns Rullgård [email protected] ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
Quoted 11 lines · M?ns Rullg?rd
I've noticed some strange things with
snd_pcm_wait. My application opens the sound device in non-blocking mode and usessnd_pcm_waitwheneversnd_pcm_writeireturn EAGAIN. This works fine as long as ALSA isn't doing any resampling. However, when resampling (e.g. from 44.1 kHz to 48 kHz)snd_pcm_waitreturns immediately, insisting that there is room in the buffer, after whichsnd_pcm_writeiobviously returns EAGAIN once more. The same thing happens if I use OSS emulation andselect()orpoll(). Replacing thesnd_pcm_waitcall with usleep(10000) makes the CPU load look normal again, while the application still works.
Quoted 6 lines
I am using Linux 2.6.4, ALSA driver 1.0.3 and library 1.0.3a with a SIS7012 chip. It behaves the same way with kernel 2.6.3 and driver 1.0.2c. I'm not quite sure when it started.
This application used to work properly. Has something changed so I need to modify my application?
Could you give me your code to analyze the problem?
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
Quoted 13 lines · Jaroslav Kysela
Quoted 11 lines · M?ns Rullg?rd
I've noticed some strange things with
snd_pcm_wait. My application opens the sound device in non-blocking mode and usessnd_pcm_waitwheneversnd_pcm_writeireturn EAGAIN. This works fine as long as ALSA isn't doing any resampling. However, when resampling (e.g. from 44.1 kHz to 48 kHz)snd_pcm_waitreturns immediately, insisting that there is room in the buffer, after whichsnd_pcm_writeiobviously returns EAGAIN once more. The same thing happens if I use OSS emulation andselect()orpoll(). Replacing thesnd_pcm_waitcall with usleep(10000) makes the CPU load look normal again, while the application still works.
Quoted 8 lines
Quoted 6 lines
I am using Linux 2.6.4, ALSA driver 1.0.3 and library 1.0.3a with a SIS7012 chip. It behaves the same way with kernel 2.6.3 and driver 1.0.2c. I'm not quite sure when it started.
This application used to work properly. Has something changed so I need to modify my application?
Could you give me your code to analyze the problem?
The full code is in http://tcvp.sf.net/tcvp-snapshot.tar.gz, if you feel like digging through 20k lines of code.
The ALSA part is in here:
http://tcvp.bkbits.net:8080/tcvp/anno/src/output/drivers/alsa/alsa.c%401.9
It is called from here:
http://tcvp.bkbits.net:8080/tcvp/anno/src/output/audio/audio.c%401.13
in the audio_play function
Signature · 9 lines
Måns Rullgård [email protected] ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
Quoted 13 lines · Jaroslav Kysela
Quoted 11 lines · M?ns Rullg?rd
I've noticed some strange things with
snd_pcm_wait. My application opens the sound device in non-blocking mode and usessnd_pcm_waitwheneversnd_pcm_writeireturn EAGAIN. This works fine as long as ALSA isn't doing any resampling. However, when resampling (e.g. from 44.1 kHz to 48 kHz)snd_pcm_waitreturns immediately, insisting that there is room in the buffer, after whichsnd_pcm_writeiobviously returns EAGAIN once more. The same thing happens if I use OSS emulation andselect()orpoll(). Replacing thesnd_pcm_waitcall with usleep(10000) makes the CPU load look normal again, while the application still works.
Quoted 8 lines
Quoted 6 lines
I am using Linux 2.6.4, ALSA driver 1.0.3 and library 1.0.3a with a SIS7012 chip. It behaves the same way with kernel 2.6.3 and driver 1.0.2c. I'm not quite sure when it started.
This application used to work properly. Has something changed so I need to modify my application?
Could you give me your code to analyze the problem?
I've noticed that it works properly using alsa-lib 1.0.0rc2. That's what I happened to have compiled, it might work with later versions too.
Did you manage to build the thing yet?
Signature · 9 lines
Måns Rullgård [email protected] ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click