Skip to content

dtc handling unreferenced nodes and an imx board dts

Heiko Stübner linux-arm-kernel linux-devicetree 1 version New

Get series with b4
b4 am 10555869.uLtJmrqZh3@phil

Versions newest first

  1. v1 Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dtc: add ability to make nodes conditional on them being referencedscripts/dtc/checks.c scripts/dtc/dtc-lexer.l scripts/dtc/dtc-parser.y +3 more+35 -00 replies
2/3ARM: dts: imx6sl: move pingroups back into soc dtsiarch/arm/boot/dts/imx6sl-evk.dts arch/arm/boot/dts/imx6sl.dtsi+185 -1810 replies
3/3ARM: dts: imx6sl: add board file for BQ Cervantesarch/arm/boot/dts/imx6sl-bq-cervantes.dts+133 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] dtc handling unreferenced nodes and an imx board dts

After showcasing my dtc change as RFC before, this series shows essentially where I want to go with the whole change - adding support for our ereaders without duplicating the generic pinconfig nodes :-) . And also provides with the dt change a user for the dtc flag addition.

That being said, the dtc change might need a bit more review and I also don't know if it should go through the scripts/dtc variant like this or some upstream and how the *_shipped files should be handled.

The patchset is done against linux-next from today, which includes both the pingroups moved to the individual board files and the bindings for the zforce touchscreen.

Heiko Stuebner (3):
dtc: add ability to make nodes conditional on them being referenced
ARM: dts: imx6sl: move pingroups back into soc dtsi
ARM: dts: imx6sl: add board file for BQ Cervantes

 arch/arm/boot/dts/imx6sl-bq-cervantes.dts | 133 +++++++++++++++++++++
 arch/arm/boot/dts/imx6sl-evk.dts          | 181 -----------------------------
 arch/arm/boot/dts/imx6sl.dtsi             | 185 ++++++++++++++++++++++++++++++
 scripts/dtc/checks.c                      |   2 +
 scripts/dtc/dtc-lexer.l                   |   7 ++
 scripts/dtc/dtc-parser.y                  |   5 +
 scripts/dtc/dtc.h                         |   4 +
 scripts/dtc/flattree.c                    |   3 +
 scripts/dtc/livetree.c                    |  14 +++
 9 files changed, 353 insertions(+), 181 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6sl-bq-cervantes.dts
Signature · 1 line
1.8.5.3