Skip to content

ATSTK1000 LCD panel support

Ben Nizette u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 6 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 6 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/6] ATSTK1000 LCD panel support
Quoted 5 lines · Haavard Skinnemoen

Right. I was thinking maybe we could extend the boot protocol to pass partitioning information from u-boot to the kernel -- that should make it possible to run the same kernel on boards with different flash layout as long as the in-flash u-boot is consistent with the flash layout.

If we do end up with libfdt on avr32 then we solve our problems here too, we can encapsulate this partitioning in the fdt image. But, as I understand it, that involves not only the actual libfdt support but making all avr32 driver nice and OF compatible. At least, if we want the fdt support to be _useful_ then that needs to happen (CMIIW).

Quoted 4 lines

One problem this doesn't solve is that if you load an older kernel which doesn't understand the extended boot protocol, it will keep using the old flash layout.

Doesn't the MTD system have facility to override partitioning information from the boot arguments? If so then any big u-boots can just ship with such a clause in their default bootargs, job done. Have to look in to that...

	--Ben.