Improve stability USB memory sticks for the common OHCI USB layer.
Get series with b4
b4 am 1221813985.6781.19.camel@galileoVersions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [patch 0/3] Improve stability USB memory sticks for the common OHCI USB layer.
Le jeudi 18 septembre 2008 ? 16:54 +0200, Remy Bohmer a ?crit :
Quoted 1 line
Hello Stelian,
Hi Remy,
Quoted 5 lines
Quoted 3 lines
I gave your patches a run on an AT91CAP9 and had limited success with them (usb seems to work, usb storage do not):
Does it work without the patches? Is it a regression, or still an improvement?
It is an improvement, without the patches it doesn't work at all
Quoted 6 lines
Quoted 6 lines
U-Boot> usb part
print_partof 0Partition Map for USB device 0 -- Partition Type: DOS
Quoted 11 lines
Quoted 5 lines
Partition Start Sector Num Sectors Type
1 63 1974208 6
print_partof 1
## Unknown partition tableThese errors are normal, 'usb part' seems to look for primary partitions on a USB stick that is formatted as a floppy...
Quoted 2 lines
U-Boot> usb storage
Device 0: not available
What about this one ? Isn't this supposed to say something else ?
Quoted 6 lines
Quoted 3 lines
U-Boot> fatinfo usb 0:1
** Invalid boot device **
I have no explanation for this error, it could be related to the filesystem on the USB stick itself.
No, the filesystem is ok. (it's a 1GB stick btw).
Quoted 3 lines
I do not see any errors that USB itself is not working, the problems I fixed were in the USB area, and they solved all the problems I encountered with USB sticks on AT91SAM9261 (OHCI)
I'll try to test on some other AT91SAM9 boards later today, if I find a few minutes...
Stelian.
Signature · 1 line
Stelian Pop <[email protected]>