Improve stability USB memory sticks for the common OHCI USB layer.
Get series with b4
b4 am 1221835325.6781.72.camel@galileoVersions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [patch 0/3] Improve stability USB memory sticks for the common OHCI USB layer.
Le vendredi 19 septembre 2008 ? 11:16 +0200, Remy Bohmer a ?crit :
Quoted 4 lines
Quoted 2 lines
I'll try to test on some other AT91SAM9 boards later today, if I find a few minutes...
Thanks, and I expect to hear some more positive news ;-)))
I'm afraid I have more bad news.
I updated my tree to the latest git. I use the ELDK 4.1 arm compiler.
Tested on an AT91SAM9263, with two different USB sticks:
U-Boot> usb reset
(Re)start USB...
USB: scanning bus for devices... ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5) ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5) ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5) ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
USB device not accepting new address (error=20)
2 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
Without your 3 patches applied, I get:
U-Boot> usb start
(Re)start USB...
USB: scanning bus for devices...
USB device not responding, giving up (status=20)
2 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
Stelian.
Signature · 1 line
Stelian Pop <[email protected]>