Improve stability USB memory sticks for the common OHCI USB layer.
Get series with b4
b4 am 1221941681.6646.8.camel@galileoVersions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [patch 0/3] Improve stability USB memory sticks for the common OHCI USB layer.
Le samedi 20 septembre 2008 ? 11:38 +0200, Remy Bohmer a ?crit :
Quoted 6 lines
Hello Stelian,
Quoted 2 lines
Quoted 1 line
Thanks, and I expect to hear some more positive news ;-)))
I'm afraid I have more bad news.
Grmbl, Now my weekend is ruined ;-))))
Sorry for that :)
[...]
Quoted 3 lines
Okay, let's summarize this:
With and without patches it does not work on AT91CAP9 and AT91SAM9263... (Without my patches you get a less detailed error message...)
Right. However the two board fail with slight different errors iirc.
Quoted 5 lines
There can be several reasons for this:
* The USB code never worked on AT91CAP9 and AT91SAM9263 with mainline, so it could be possible that there is some initialisation missing for CAP9 and SAM9263, possible for more CPU's also that did not work before with GCC 3.x.
Sure. However, I've double checked the Linux initialisation code for the usb host on the AT91 boards and the U-Boot counterparts and there are only a few differences (some VBus GPIOs to set on the AT91SAM9263, an additionnal clock for AT91SAM9261), and I cannot find anything which could go wrong here.
Quoted 3 lines
Does not mean the patches are bad, but does mean that it could be possible/likely that these patches do not fix all problems for all boards and all sticks.
Sure.
[...]
Quoted 3 lines
I want to invest some time in it to debug these issues also, but then I will need your help, because I do not have a SAM9263, CAP9 board so I cannot reproduce your problems here.
I do have a SAM9263 in front of me waiting for your experimental patches :-)
And I can do some extra tests on other Atmel boards, but this will have to wait a week or so because I won't have access to them before then.
Quoted 4 lines
I have several ideas where to look, and can create some experimental patches, but before I do that and bother you unnecessary, I would like to get some more information from you about which USB sticks you are using.
I tested with 2 different USB sticks, a very old 256 MB one and a more recent 1 GB. They behave exactly the same.
Quoted 5 lines
Can you please provide me the output of: (even if the command fails)
* usb info
* usb storage
* usb tree
* and if possible a 'lsusb -v' output from linux of your USB sticks
See below.
Quoted 4 lines
Also, it would be very helpful if you would test your sticks on a SAM9261, because that SoC _must_ work. (I tested on AT91SAM9261-EK, and custom board)
Then we can relate the problem to a specific USB stick, or to a certain SoC.
Hmm, I can do that, but not before September 29.
Stelian.
U-Boot> usb start
(Re)start USB...
USB: scanning bus for devices...
USB device not responding, giving up (status=20)
2 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
U-Boot> usb info
1: Hub, USB Revision 1.10
- OHCI Root Hub
- Class: Hub
- PacketSize: 8 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 0.0
Configuration: 1
- Interfaces: 1 Self Powered 0mA
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 2 Interval 255ms
Configuration: 0
- Interfaces: 0 Bus Powered 0mA
U-Boot> usb storage
No storage devices, perhaps not 'usb start'ed..?
U-Boot> usb re tree
Device Tree:
1 Hub (12MBit/s, 0mA)
| OHCI Root Hub | |+-0 See Interface (12MBit/s, 0mA)
U-Boot> boot
[...]at91_ohci at91_ohci: AT91 OHCIat91_ohci at91_ohci: new USB bus registered, assigned bus number 1 at91_ohci at91_ohci: irq 29, io mem 0x00a00000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 1-1: new full speed USB device using at91_ohci and address 2 usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage USB Mass Storage support registered.
[...]
scsi 0:0:0:0: Direct-Access USB 2.0 Mobile Disk N4S 1.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 507904 512-byte hardware sectors (260 MB) sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] 507904 512-byte hardware sectors (260 MB) sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
[...]
at91sam9263ek login: root
root at at91sam9263ek:~$ lsusb -v
Bus 001 Device 002: ID 126f:1325 TwinMOS Mobile Disk Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x126f TwinMOS idProduct 0x1325 Mobile Disk bcdDevice 1.00 iManufacturer 16 TTI-WDE iProduct 32 USB 2.0 Mobile Disk iSerial 48 FF04112100886
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 64 iCfg
bmAttributes 0x80
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 96 BULK
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 255
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 255
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.22 ohci_hcd iProduct 2 AT91 OHCI iSerial 1 at91 bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0x00
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0100 power
root at at91sam9263ek:~$
Signature · 1 line
Stelian Pop <[email protected]>