Skip to content

: add alpha es40 system emulation

Tristan Gingold qemu-devel 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest24 patches 7 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/24Add support for multi-level phys map.exec.c+38 -120 replies
2/24Fix cpu_physical_memory_rw when operating on IO blocks.exec.c+15 -110 replies
3/24Fix bug: palcode is at least 6 bits.target-alpha/translate.c+1 -10 replies
4/24Fix bug: do not mask address LSBs for ldwu.target-alpha/translate.c+1 -10 replies
5/24bug fix: avoid nop to override next instructiontarget-alpha/translate.c+3 -30 replies
6/24Be slightly more verbose for unassigned_mem_read*exec.c+3 -30 replies
7/24Increase Alpha physical address size to 44 bits.exec.c+1 -20 replies
8/24Allow 5 mmu indexes.exec.c softmmu_exec.h+49 -100 replies
9/24Split cpu_mmu_index into cpu_mmu_index_data and cpu_mmu_index_code.exec-all.h softmmu_header.h target-alpha/cpu.h +11 more+36 -191 reply
10/24Add square wave output support.hw/mc146818rtc.c hw/pc.h+31 -100 replies
11/24Add ali1543 super IO pci device.hw/ali1543.c hw/pci.h+135 -00 replies
12/24Add 21272 chipset (memory and pci controller for alpha)hw/21272.c hw/pci.h+706 -00 replies
13/24Add target-alpha/machine.c with es40 machine emulation.Makefile.target hw/boards.h hw/es40.c +1 more+952 -02 replies
14/24Move softmmu_helper.h from exec.h to op_helper.c on alpha.target-alpha/exec.h target-alpha/op_helper.c+4 -40 replies
15/24Document which IPR are used by 21264.target-alpha/cpu.h+65 -310 replies
16/24tb_flush helper should flush the tb (and not the tlb).target-alpha/op_helper.c+1 -10 replies
17/24Add instruction name in comments for hw_ld opcode.target-alpha/translate.c+20 -200 replies
18/24Remove PALCODE_ declarations (unused).target-alpha/cpu.h+0 -100 replies
19/24alpha ld helpers now directly return the value.target-alpha/helper.h target-alpha/op_helper.c+28 -360 replies
20/24Add alpha_cpu_list.target-alpha/cpu.h target-alpha/translate.c+36 -22 replies
21/24Alpha: lower parent irq when irq is lowered.hw/i8259.c+1 -10 replies
22/24Move linux-user pal emulation to linux-user/Makefile.target hw/alpha_palcode.c linux-user/main.c +3 more+87 -1020 replies
23/24Correctly decode hw_ld/hw_st opcodes for all alpha implementations.target-alpha/translate.c+24 -80 replies
24/24Add full emulation for 21264.cpu-exec.c hw/alpha_palcode.c target-alpha/cpu.h +3 more+819 -4730 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [Qemu-devel] [PATCH 0/24]: add alpha es40 system emulation

this patch series adds alpha system emulation for the es40. The work is not yet complete (don't expect to boot an OS) but enough to get the firmware prompt.

The only processor supported is the alpha 21264 but the infrastructure is here to support other processors or pal emulation.

The system emulated is the ES40
http://www.compaq.com/alphaserver/archive/es40/index.html
It is a mid-range system that is quite well documented, supports all alpha OSes (AFAIK) and its firmware is available.

The emulation uses the original firmware. See comment at the head of hw/es40.c for building the rom image.

This work is a first step and I plan to continue this work. That's the reason why I left some (deactivated) debug code and placed a few aborts. Also it is not yet built by default.

Only the last patch adds full cpu emulation. The previous ones fix bugs, clen up, add new devices and es40 machine or add new features.

Comments are welcome,
Tristan.