Skip to content

Support for OMAP3 Zoom2 board

Mikkel Christensen linux-omap 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest3 patches 12 repliesIn review
  2. v23 patches 5 repliesSuperseded
  3. v13 patches 2 repliesSuperseded

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3OMAP3:zoom2: Add support for OMAP3 Zoom2 boardarch/arm/mach-omap2/board-zoom2-debugboard.c arch/arm/mach-omap2/board-zoom2.c+268 -011 replies
2/3OMAP3:zoom2: Defconfig for Zoom2 boardarch/arm/configs/omap3_zoom2_defconfig+1211 -00 replies
3/3OMAP3:zoom2: Makefile and Kconfig for Zoom2 boardarch/arm/mach-omap2/Kconfig arch/arm/mach-omap2/Makefile+8 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH v3 0/3] Support for OMAP3 Zoom2 board

The following patch series adds support for Zoom2 board. This is a new version made after comments from Kevin Hilman.

An external debug board is included for console and LAN.

For details refer to this site:
http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp

Future work:
- SMSC911x NFS mount problem
- Low level debug uart need to use debug board

TI wiki with FAQs on getting this board booting:
https://omapzoom.org/gf/project/omapzoom/wiki/?pagename=GettingStartedWithZoomII_AKA_OMAP34XII_MDP

Diffstat:

 configs/omap3_zoom2_defconfig       | 1211 ++++++++++++++++++++++++++++++++++++
 mach-omap2/Kconfig                  |    5 
 mach-omap2/Makefile                 |    4 
 mach-omap2/board-zoom2-debugboard.c |  161 ++++
 mach-omap2/board-zoom2.c            |  107 +++
 5 files changed, 1487 insertions(+), 1 deletion(-)