Skip to content

bnx2: Zero out status block before chip reset.

Michael Chan netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest8 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/8bnx2: Zero out status block before chip reset.drivers/net/bnx2.c+1 -01 reply
2/8bnx2: Check if_running() before touching chip registers.drivers/net/bnx2.c+9 -10 replies
3/8bnx2: Close device if MTU change or ring size change fails.drivers/net/bnx2.c+7 -20 replies
4/8bnx2: Apply BROKEN_STATS workaround to 5706 and 5708.drivers/net/bnx2.c drivers/net/bnx2.h+5 -30 replies
5/8bnx2: Report FTQ discard counter.drivers/net/bnx2.c+12 -80 replies
6/8bnx2: Refine coalescing parameters.drivers/net/bnx2.c+5 -50 replies
7/8bnx2: Use const on flash_table structure.drivers/net/bnx2.c drivers/net/bnx2.h+4 -40 replies
8/8bnx2: Update version to 2.0.2.drivers/net/bnx2.c+2 -20 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread