Skip to content

sbc8548 update; remaining bits for 85xx tree.

Paul Gortmaker u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest6 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6fsl_pci: create a SET_STD_PCI_INFO() helper wrapperinclude/asm-ppc/fsl_pci.h+12 -01 reply
2/6sbc8548: remove eTSEC3/4 voltage hackboard/sbc8548/sbc8548.c+0 -61 reply
3/6sbc8548: use I/O accessorsboard/sbc8548/sbc8548.c+45 -464 replies
4/6sbc8548: correct local bus SDRAM size from 64M to 128Mboard/sbc8548/sbc8548.c board/sbc8548/tlb.c include/configs/sbc8548.h+60 -122 replies
5/6sbc8548: update PCI/PCI-e support codeboard/sbc8548/law.c board/sbc8548/sbc8548.c board/sbc8548/tlb.c +1 more+94 -1401 reply
6/6sbc8548: allow enabling PCI via a make config optionMAKEALL Makefile include/configs/sbc8548.h+43 -121 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/6] sbc8548 update; remaining bits for 85xx tree.

This is the remaining bits that weren't merged to 85xx, with the the requested fixes of course. Those being:

sbc8548: correct local bus SDRAM size from 64M to 128M
-now uses I/O accesors on BR4/OR4

sbc8548: update PCI/PCI-e support code
-redone to make use of the code de-duplification effort.

sbc8548: allow enabling PCI via a make config option
-uses the "-t" to de-clutter the toplevel Makefile

New patches are as follows:
fsl_pci: create a SET_STD_PCI_INFO() helper wrapper
-I believe this was meant to be created, but wasn't.

sbc8548: use I/O accessors
-uses the I/O accessors through the whole board file.

sbc8548: remove eTSEC3/4 voltage hack
-noticed this while doing above; sbc doesn't need it.

Board still seems happy; I only noticed one cosmetic thing, that the new fsl_pci_init_port() prints "PCIE" always; even when the port is PCI and not PCI-e (see below).

Thanks,
Paul.

U-Boot 2009.08-06732-g70c5c3d (Sep 20 2009 - 20:11:42)

CPU:   8548E, Version: 2.0, (0x80390020)                                        
Core:  E500, Version: 2.0, (0x80210020)                                         
Clock Configuration:                                                            
       CPU0:990  MHz,                                                           
       CCB:396  MHz,                                                            
       DDR:198  MHz (396 MT/s data rate), LBC:99   MHz                          
L1:    D-cache 32 kB enabled                                                    
       I-cache 32 kB enabled                                                    
Board: Wind River SBC8548 Rev. 0x2                                              
I2C:   ready                                                                    
DRAM:  Initializing                                                             
    SDRAM: 128 MB                                                               
    DDR: 256 MB                                                                 
FLASH: 72 MB                                                                    
L2:    512 KB enabled                                                           

PCI host: 64 bit, 66 MHz, sync, arbiter
Scanning PCI bus 00
00 01 8086 1026 0200 00
PCIE1 on bus 00 - 00

PCIE at base address e000a000
Scanning PCI bus 02
02 00 1148 9e00 0200 00
PCIE1 on bus 01 - 02

In:    serial                                                                   
Out:   serial                                                                   
Err:   serial                                                                   
Net:   eTSEC0, eTSEC1                                                           

=>