Make sure 85xx bss doesn't start at 0x0
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 2 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/2] Make sure 85xx bss doesn't start at 0x0
Hi Wolfgang,
Quoted 5 lines
So far U-Boot is actually a 32 bit boot loader; address calculations like this "just wrap around". So far this has not caused problems yet; what has caused problems is that we can have overlapping sections on 4xx. Also it's probably overkill that each board has it's own linker script.
I added some debug and came to the same conclusion about the wrapping math.
Full ack on the linker script consolidation.
Quoted 21 lines
I would like to see this fixed in this process. Maybe Stefan finds some spare cycles to address this.
Quoted 18 lines
Quoted 4 lines
Where is BSS on 44x boards? I dont see any reason we shouldn't be able to put it at the same location.
From the XPedite1000:
[ 0] NULL 00000000 000000 000000 00 0 0 0 [ 1] .resetvec PROGBITS fffffffc 03f2e4 000004 00 AX 0 0 1 [ 2] .bootpg PROGBITS fffff000 03e2e8 000250 00 AX 0 0 1 [ 3] .text PROGBITS fff80000 000094 0303b0 00 AX 0 0 4 [ 4] .rodata PROGBITS fffb03b0 030444 00a14c 00 A 0 0 4 [ 5] .reloc PROGBITS fffba500 03a594 002280 00 WA 0 0 4 [ 6] .data PROGBITS fffbc780 03c814 00088c 00 WA 0 0 4 [ 7] .data.rel.local PROGBITS fffbd00c 03d0a0 000a98 00 WA 0 0 4 [ 8] .data.rel.ro.loca PROGBITS fffbdaa4 03db38 0000b0 00 WA 0 0 4 [ 9] .data.rel PROGBITS fffbdb54 03dbe8 000100 00 WA 0 0 4 [10] .u_boot_cmd PROGBITS fffbdc54 03dce8 000600 00 WA 0 0 4 [11] .bss NOBITS fffbe300 03e2e8 011c44 00 WA 0 0 4
Quoted 4 lines
Quoted 2 lines
I shied away from this for the 2 reasons above - the bootpg section will be wiped out when the bss is cleared for images near their maximum size
I think it will not be needed any more by then.
Its not currently used (at least on 85xx), but I know using it had been mentioned in the past. There's a >3K chunk that's sitting empty right now that could be used. All things being equal I think it would be ideal not to trash a section of U-Boot code - it could be useful and at some point someone's going to be banging their head on the wall trying to figure out why some chunk of assembly code isn't working.
Quoted 5 lines
Quoted 3 lines
If everyone is OK with the limitation of #1 above I can make the 85xx act like the other PPC boards. The only downside I see is that we could never put any non-reset related code in the bootpg.
What about my suggestion to chose a fixed (random, non-zero) address?
I'd vote against this. It'd have to be some area in low memory and people would be bound to accidentally stomp on it and cause all sorts of odd errors- like overwriting the exception vectors, but harder to debug. I personally like the current implementation of putting the bss after the entire U-Boot image. It keeps U-Boot's code, malloc pool, stack, bss, etc all in the same general area which is nice, and has the side benefit that the bootpg won't be overwritten.
I know ORing in 0x10 is a bit ugly, but what's the real downside of doing it?
Best,
Peter