Skip to content

Support for A4M072 board

Ilya Yanok u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4A4M072: Added support for the board.MAINTAINERS MAKEALL board/a4m072/Makefile +6 more+773 -11 reply
1/4A4M072: Added support for the board.+0 -01 reply
2/4led_display: split led display support into generic and hw-dependent partscommon/cmd_display.c doc/README.LED_display drivers/misc/Makefile +4 more+137 -171 reply
3/4a4m072: led display supportboard/a4m072/a4m072.c include/configs/a4m072.h+184 -21 reply
4/4a4m072: support for SHOW_BOOT_PROGRESS feature using LED displayboard/a4m072/a4m072.c include/configs/a4m072.h+76 -51 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/4] Support for A4M072 board

These patches add support for A4M072 MPC5200-based board. The first patch adds new board with support for all devices except for 7-segment LED display.
We've decided to use 'display' command to manipulate the LED display so the second patch adds very simple generic interface to use such devices and moves hw-specific realization to drivers/misc/pdsp188x.c The third patch adds 7-segment LED display support.
And the fourth file adds support for showing boot progress codes on LED display (we can't display them directly so we use a mapping).

Regards, Ilya.