Skip to content

add tnetv107x input drivers

Cyril Chemparathy linux-input 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest5 patches 1 replyIn review
  2. v35 patches 2 repliesSuperseded
  3. v25 patches 3 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v17 patches7 repliesSuperseded

Changes in v4 from the cover letter

1. Locking between hardirqs for keypad driver

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5input: add driver for tnetv107x on-chip keypad controllerdrivers/input/keyboard/Kconfig drivers/input/keyboard/Makefile drivers/input/keyboard/tnetv107x-keypad.c+350 -00 replies
2/5davinci: add tnetv107x keypad platform devicearch/arm/mach-davinci/devices-tnetv107x.c arch/arm/mach-davinci/include/mach/tnetv107x.h+33 -00 replies
3/5davinci: add keypad config for tnetv107x evm boardarch/arm/mach-davinci/board-tnetv107x-evm.c+56 -00 replies
4/5input: add driver for tnetv107x touchscreen controllerdrivers/input/touchscreen/Kconfig drivers/input/touchscreen/Makefile drivers/input/touchscreen/tnetv107x-ts.c+406 -00 replies
5/5davinci: add tnetv107x touchscreen platform devicearch/arm/mach-davinci/devices-tnetv107x.c+20 -00 replies

Reviews trailers per patch

2 of 5 patches have a Reviewed-by or Acked-by.

PatchDmitry Torokhov
1/5A-b
2/5
3/5
4/5A-b
5/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 0/5] add tnetv107x input drivers

Texas Instruments' TNETV107X is an ARM1176 based SoC, with on-chip touchscreen and keypad controllers. This patch series adds drivers for these controllers.

Changes between v1 and v2:
1. Cleaned up platform data needs by reusing matrix keypad pdata
2. Eliminated calibration code from touch driver
3. Relocated h/w init code to open and close
4. Other minor cleanups

Changes between v2 and v3:
1. Merged keycodes alloc into keypad data
2. Moved irq hookup to probe from open
3. Other minor cleanups

Changes between v3 and v4:
1. Locking between hardirqs for keypad driver

Cyril Chemparathy (5):
input: add driver for tnetv107x on-chip keypad controller
davinci: add tnetv107x keypad platform device
davinci: add keypad config for tnetv107x evm board
input: add driver for tnetv107x touchscreen controller
davinci: add tnetv107x touchscreen platform device

 arch/arm/mach-davinci/board-tnetv107x-evm.c    |   56 ++++
 arch/arm/mach-davinci/devices-tnetv107x.c      |   50 +++
 arch/arm/mach-davinci/include/mach/tnetv107x.h |    3 +
 drivers/input/keyboard/Kconfig                 |    9 +
 drivers/input/keyboard/Makefile                |    1 +
 drivers/input/keyboard/tnetv107x-keypad.c      |  340 ++++++++++++++++++++
 drivers/input/touchscreen/Kconfig              |    9 +
 drivers/input/touchscreen/Makefile             |    1 +
 drivers/input/touchscreen/tnetv107x-ts.c       |  396 ++++++++++++++++++++++++
 9 files changed, 865 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/keyboard/tnetv107x-keypad.c
 create mode 100644 drivers/input/touchscreen/tnetv107x-ts.c