Skip to content

USB: add support for cns3xxx SOC's EHCI/OHCI controller

[email protected] linux-arm-kernel lkml 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest3 patches 10 repliesIn review
  2. v13 patches 0 repliesSuperseded

Changes in v2 from the cover letter

- Changing CNS3XXX to cns3xxx in subjec for part of the patches are filtered due to "capital Triple-X in subject".

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3ARM: cns3xxx: Add new and export the old power management functionsarch/arm/mach-cns3xxx/core.h arch/arm/mach-cns3xxx/include/mach/pm.h arch/arm/mach-cns3xxx/pm.c+38 -21 reply
2/3ARM: cns3xxx: Add architecture definition for EHCI/OHCI controllerarch/arm/mach-cns3xxx/cns3420vb.c arch/arm/mach-cns3xxx/include/mach/cns3xxx.h arch/arm/mach-cns3xxx/include/mach/pm.h +1 more+56 -27 replies
3/3USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCsdrivers/usb/Kconfig drivers/usb/host/Kconfig drivers/usb/host/ehci-cns3xxx.c +3 more+374 -02 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/3] USB: add support for cns3xxx SOC's EHCI/OHCI controller

From: Mac Lin <[email protected]>

v2:
- Changing CNS3XXX to cns3xxx in subjec for part of the patches are filtered due to "capital Triple-X in subject".

v1:
The first patch prepare the mach-cns3xxx power management code for drivers use. The other two patches add the bus glue for EHCI/OHCI controller in mach-cns3xxx and usb.

This patchset is based on linux-2.6.37-rc2

Mac Lin (3):
ARM: cns3xxx: Add new and export the old power management functions
ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller
USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs

 arch/arm/mach-cns3xxx/cns3420vb.c            |   50 ++++++++
 arch/arm/mach-cns3xxx/core.h                 |    4 +-
 arch/arm/mach-cns3xxx/include/mach/cns3xxx.h |    2 -
 arch/arm/mach-cns3xxx/include/mach/pm.h      |   21 +++
 arch/arm/mach-cns3xxx/pm.c                   |   21 +++
 drivers/usb/Kconfig                          |    2 +
 drivers/usb/host/Kconfig                     |   15 +++
 drivers/usb/host/ehci-cns3xxx.c              |  176 ++++++++++++++++++++++++++
 drivers/usb/host/ehci-hcd.c                  |    5 +
 drivers/usb/host/ohci-cns3xxx.c              |  171 +++++++++++++++++++++++++
 drivers/usb/host/ohci-hcd.c                  |    5 +
 11 files changed, 468 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/mach-cns3xxx/include/mach/pm.h
 create mode 100644 drivers/usb/host/ehci-cns3xxx.c
 create mode 100644 drivers/usb/host/ohci-cns3xxx.c