Skip to content

get at91rm9200ek working with ARM relocation

Andreas Bießmann u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4at91rm9200ek: add configure target for RAM bootboard/atmel/at91rm9200ek/config.mk boards.cfg include/configs/at91rm9200ek.h+16 -30 replies
2/4MAKEALL: fix AT91MAKEALL+3 -150 replies
3/4arm920t: fix linker skript for -pie linkingarch/arm/cpu/arm920t/u-boot.lds+3 -01 reply
3/4arm920t: fix linker skript for -pie linking+0 -03 replies
3/4arm920t: fix linker skript for -pie linking+0 -00 replies
4/4arm920t/at91/timer: replace bss variables by gdarch/arm/cpu/arm920t/at91/timer.c include/configs/at91rm9200ek.h+16 -151 reply
4/4arm920t/at91/timer: replace bss variables by gd+0 -05 replies
4/4arm920t/at91/timer: replace bss variables by gd+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/4] get at91rm9200ek working with ARM relocation

This patch series enables at91rm9200ek board to work with new ARM relocation. Unfortunately the board does _not_ fully work, there is one issue left I can't figure out currently. When booting from pre-initialised clock and RAM (e.g. by JTAG dongle or preloader) the relocation works.
But when booting from NOR flash the board hangs just after 'relocation Offset is: 11f7f000'. I think it is the same issue with using bss before relocation but couldn't find the loacation til now. I don't know if I get it done til release of v2010.12 but like to have the current changes in.

The series includes two patches already in Reinhard's u-boot-atmel/at91-next branch but the base of at91-next is outdated and they will not apply cleanly. So feel free to include them or not. Reinhard, any comments?
The mentioned patches are:

at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91

Beside that the 'add configure target for RAM boot' is needed for working configuration as ram-boot since nor-boot is currently broken ;)

Andreas Bie?mann (4):
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t: fix linker skript for -pie linking
arm920t/at91/timer: replace bss variables by gd

 MAKEALL                            |   18 +++---------------
 arch/arm/cpu/arm920t/at91/timer.c  |   29 ++++++++++++++---------------
 arch/arm/cpu/arm920t/u-boot.lds    |    3 +++
 board/atmel/at91rm9200ek/config.mk |    2 --
 boards.cfg                         |    3 ++-
 include/configs/at91rm9200ek.h     |   16 ++++++++++++++++
 6 files changed, 38 insertions(+), 33 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/config.mk
Signature · 1 line
1.7.3.2