OMAP: Introduce Backlight driver for Sharp LS037V7DW01 LCD panel
Get series with b4
b4 am 1291217575.10133.165.camel@tubuntuVersions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/3] OMAP: Introduce Backlight driver for Sharp LS037V7DW01 LCD panel
Hi,
Quoted 7 lines · ext Bryan Wu
After instroducing generic DPI panel driver for OMAP DSS2 system, we need to split out backlight driver from Sharp LS037V7DW01 panel driver before we move to the generic DPI panel driver.
This patchset introcuded backlight driver and cleanup the old Sharp LS037V7DW01 panel driver related code.
Quoted 6 lines
It's built on mainline 2.6.37-rc4
Bryan Wu (3):
Backlight: driver for Sharp LS037V7DW01 panel on OMAP machine
OMAP: move Sharp LS LCD panel device to generic DPI panel driver and new backlight driver
OMAP: DSS2: remove Sharp LS037V7DW01 panel driver
I don't think this is quite the right direction.
All the backlight driver does is call a function in the board file. It's not really a "sharp ls backlight driver", but rather generic one. I'm not even sure if it needs the dssdev pointer.
This kind of backlight is, in a sense, totally separate component from the panel itself. All they have in common is that they are packaged in the same physical display module, and they usually share the same connector.
I have seen three kinds of backlights on OMAP devices:
- on/off GPIO (like on 3430 SDP)
- PWM based (zoom seems to have this)
- Panel controlled (Taal-panel. Also PWM based, but OMAP doesn't see that)
The first two could (should?) be totally separate backlights from the panel itself. For those, a generic backlight driver could perhaps work. The third one needs to be quite tied to the panel driver, and I'm not sure how easy it would be to have a separate driver for that.
Tomi